- 31 Oct, 2023 7 commits
-
-
Ben Skeggs authored
- disable ACR completely when GSP-RM detected Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230918202149.4343-6-skeggsb@gmail.com
-
Ben Skeggs authored
- move TOP after GSP, so we can disable TOP if GSP is in use - provide plumbing to support falcon-only and GSP-RM paths - provide a method for subdevs to detect GSP-RM paths - split tu102/tu116/ga100 paths from gv100, which can't support GSP-RM Signed-off-by:
-
Ben Skeggs authored
RM (and GH100) support 8 NVJPG instances. Signed-off-by:
-
Ben Skeggs authored
RM (and GH100) support 8 NVDEC instances. Signed-off-by:
-
Ben Skeggs authored
This was cargo-culted from traces of RM when the code was written, but we probably shouldn't be touching NV_PFB regs while GSP-RM is running. From traces, it looks like NVIDIA dropped this sometime between 510.54 and 515.48.07, so I guess we can too. Signed-off-by:
-
https://gitlab.freedesktop.org/agd5f/linuxDave Airlie authored
amd-drm-next-6.7-2023-10-27: amdgpu: - RAS fixes - Seamless boot fixes - NBIO 7.7 fix - SMU 14.0 fixes - GC 11.5 fixes - DML2 fixes - ASPM fixes - VPE fixes - Misc code cleanups - SRIOV fixes - Add some missing copyright notices - DCN 3.5 fixes - FAMS fixes - Backlight fix - S/G display fix - fdinfo cleanups - EXT_COHERENT fixes for APU and NUMA systems amdkfd: - Misc fixes - Misc code cleanups - SVM fixes Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v6.7-rc1: drm-misc-next-2023-10-19 + following: UAPI Changes: Cross-subsystem Changes: - Convert fbdev drivers to use fbdev i/o mem helpers. Core Changes: - Use cross-references for macros in docs. - Make drm_client_buffer_addb use addfb2. - Add NV20 and NV30 YUV formats. - Documentation updates for create_dumb ioctl. - CI fixes. - Allow variable number of run-queues in scheduler. Driver Changes: - Rename drm/ast constants. - Make ili9882t its own driver. - Assorted fixes in ivpu, vc4, bridge/synopsis, amdgpu. - Add planar formats to rockchip. Signed-off-by:
-
- 27 Oct, 2023 8 commits
-
-
Umio Yasuno authored
Remove unused variables from amdgpu_show_fdinfo Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Umio Yasuno <coelacanth_dream@protonmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Rob Clark authored
Some of the fields that are handled by drm_show_fdinfo() crept back in when rebasing the patch. Remove them again. Fixes: 376c25f8 ("drm/amdgpu: Switch to fdinfo helper") Reviewed-by:
Rob Clark <robdclark@chromium.org> Reviewed-by: <alexander.deucher@amd.com> Co-developed-by:
-
Kenneth Feng authored
avoid to disable gfxhub interrupt when driver is unloaded on gmc 11 Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
-
David Francis authored
On gfx943 APU, EXT_COHERENT should give MTYPE_CC for local and MTYPE_UC for nonlocal memory. On NUMA systems, local memory gets the local mtype, set by an override callback. If EXT_COHERENT is set, memory will be set as MTYPE_UC by default, with local memory MTYPE_CC. Add an option in the override function for this case, and add a check to ensure it is not used on UNCACHED memory. V2: Combined APU and NUMA code into one patch V3: Fixed a potential nullptr in amdgpu_vm_bo_update Signed-off-by:
David Francis <David.Francis@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Candice Li authored
Retrieve correctable error count from ce_count_lo_chip instead of mca_umc_status. Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Candice Li authored
Use ErrorCodeExt field to identify data parity error in replay mode. Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Reviewed-by:
Yang Wang <kevinyang.wang@amd.com> Signed-off-by:
-
Mukul Joshi authored
Fix a typo in parsing of the GC info table header when reading the IP discovery table. Fixes: 0e64c9aa ("drm/amdgpu: add type conversion for gc info") Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Reviewed-by:
-
Hamza Mahfooz authored
An assignment statement was reversed during a refactor which effectively disabled S/G display outright. Since, we use adev->mode_info.gpu_vm_support to indicate to the rest of the driver that S/G display should be enabled and currently it is always set to false. So, to fix this set adev->mode_info.gpu_vm_support's value to that of init_data.flags.gpu_vm_support (and not vice versa). Fixes: 098c1307 ("drm/amd/display: enable S/G display for for recent APUs by default") Reported-by:
Mark Broadworth <mark.broadworth@amd.com> Tested-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
- 26 Oct, 2023 25 commits
-
-
James Zhu authored
amdxcp unloads incompletely, and below error will be seen during load/unload, sysfs: cannot create duplicate filename '/devices/platform/amdgpu_xcp.0' devres_release_group will free xcp device at first, platform device will be unregistered later in platform_device_unregister. Signed-off-by:
James Zhu <James.Zhu@amd.com> Acked-by:
-
Li Ma authored
Modify the print format of the fractional part to avoid display error. Signed-off-by:
Li Ma <li.ma@amd.com> Reviewed-by:
-
Lijo Lazar authored
PCI domain/segment information of xccs is available through ACPI DSM methods. Consider that also while looking for devices. Signed-off-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Acked-by:
-
Lin.Cao authored
In SR-IOV environment, the value of pcie_table->num_of_link_levels will be 0, and num_of_levels - 1 will cause array index out of bounds Signed-off-by:
Lin.Cao <lincao12@amd.com> Acked-by:
Jingwen Chen <Jingwen.Chen2@amd.com> Signed-off-by:
-
Lijo Lazar authored
Issue a read to confirm the register write before ringing doorbell. With multiple XCCs there is chance for race condition. Signed-off-by:
Asad Kamal <asad.kamal@amd.com> Signed-off-by:
-
Yifan Zhang authored
is_mode1_reset_supported may be called before smu init, when smu_context is unitialized in driver load/unload test. Call smu_cmn_get_smc_version explicitly in is_mode1_reset_supported. v2: apply to aldebaran in case is_mode1_reset_supported will be uncommented (Candice Li) Fixes: 710d9cae ("drm/amd/pm: drop most smu_cmn_get_smc_version in smu") Signed-off-by:
-
Tao Zhou authored
Add DF block and RAS poison mode query for DF v4_6_2. Signed-off-by:
Stanley.Yang <Stanley.Yang@amd.com> Acked-by:
-
Lijo Lazar authored
Use subrevision of IP version in discovery table to identify SOC revision id for NBIO v7.9 SOCs. Only newer bootloaders update subrevision field. Signed-off-by:
Le Ma <le.ma@amd.com> Signed-off-by:
-
Aric Cyr authored
DC v3.2.256 Summary: * Fixes null-deref regression after "drm/amd/display: Update OPP counter from new interface" * Fixes display flashing when VSR and HDR enabled on dcn32 * Fixes dcn3x intermittent hangs due to FPO * Fixes MST Multi-Stream light up on dcn35 * Fixes green screen on DCN31x when DVI and HDMI monitors attached * Adds DML2 improvements * Adds idle power optimization improvements * Accommodates panels with lower nit backlight * Updates SDP VSC colorimetry from DP test automation request * Reverts "drm/amd/display: allow edp updates for virtual signal" Acked-by:
Roman Li <roman.li@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Aurabindo Pillai authored
[Why&How] To enable automated testing through IGT, expose an API that is accessible through debugfs to query current status of SubVP feature. Reviewed-by:
Alvin Lee <alvin.lee2@amd.com> Acked-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by:
-
Iswara Nagulendran authored
[HOW&WHY] Reading the value from DP_EDP_BACKLIGHT_MODE_SET_REGISTER, DPCD 0x721 before setting the BP_EDP_PANEL_LUMINANC_CONTROL_ENABLE bit to ensure there are no accidental overwrites. Reviewed-by:
Sreeja Golui <sreeja.golui@amd.com> Reviewed-by:
Harry Vanzylldejong <harry.vanzylldejong@amd.com> Acked-by:
Iswara Nagulendran <iswara.nagulendran@amd.com> Tested-by:
-
Michael Strauss authored
[WHY] Currently causes some DP link layer failures, backing out until the failures are root caused. Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by:
Michael Strauss <michael.strauss@amd.com> Tested-by:
-
Ilya Bakoulin authored
[Why] LUT params are not cleared after setting blend TF, which can lead to same params being used for the shaper, if the shaper func is bypassed. [How] Set lut_params to NULL after program_1dlut. Reviewed-by:
Krunoslav Kovac <krunoslav.kovac@amd.com> Acked-by:
Ilya Bakoulin <ilya.bakoulin@amd.com> Tested-by:
-
Samson Tam authored
[Why] In cases where number of pipes available is less than num_opp, there will opp instances that are null [How] Add null check to skip over these opp instances Fixes: 40de8403 ("drm/amd/display: Update OPP counter from new interface") Reviewed-by:
Samson Tam <samson.tam@amd.com> Tested-by:
-
Alvin Lee authored
Provide DCN32 specific sequence and update DCN30 sequence Reviewed-by:
-
Samson Tam authored
[Why] Helper function calculates num_ways using 32-bit. But is returned as 8-bit. If num_ways exceeds 8-bit, then it reports back the incorrect num_ways and erroneously uses MALL when it should not [How] Make returned value 32-bit and convert after it checks against caps.cache_num_ways, which is under 8-bit Reviewed-by:
-
Rodrigo Siqueira authored
This commit adds the amdgpu_dm_plane_ prefix for all functions in the amdgpu_dm_plane.c. This change enables an easy way to filter code paths via ftrace. Reviewed-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by:
-
Rodrigo Siqueira authored
The ftrace debug feature allows filtering functions based on a prefix, which can be helpful in some complex debug scenarios. The driver can benefit more from this feature if the function name follows some patterns; for this reason, this commit adds the prefix amdgpu_dm_crtc_ to all the functions that do not have it in the amdgpu_dm_crtc.c file. Reviewed-by:
-
Rodrigo Siqueira authored
This commit just replaces dc_interrupt_po*r*larity with its correct name, which is dc_interrupt_polarity. Reviewed-by:
-
Alex Hung authored
[WHY & HOW] Virtual sink is not audio-capable and this causes kms_hdmi_inject's inject-audio to fail. Set it to HDMI according to EDID. Reviewed-by:
Chao-kai Wang <stylon.wang@amd.com> Acked-by:
Alex Hung <alex.hung@amd.com> Tested-by:
-
Alex Hung authored
This reverts commit 4ad3ee5c. [WHY & HOW] Virtual signal is not supported as audio capable by DC. Reviewed-by:
-
Sung Joon Kim authored
[why] Bandwidth validation failure on framepack tests. Need to double pixel clock when 3D format is framepack. Also for HDMI displays, we need to keep the ITC flag to 1 by default. [how] Double the pixel clock when using framepack 3D format. Set hdmi ITC bit to 1. Reviewed-by:
Charlene Liu <charlene.liu@amd.com> Acked-by:
Sung Joon Kim <sungkim@amd.com> Tested-by:
-
Nicholas Kazlauskas authored
[Why] Intermittent reboot hangs are observed introduced by "Improve x86 and dmub ips handshake". [How] Bring back the commit but fix the polling. Avoid hanging in place forever by bounding the delay and ensure that we still message DMCUB on IPS2 exit to notify driver idle has been cleared. Reviewed-by:
Duncan Ma <duncan.ma@amd.com> Reviewed-by:
Jun Lei <jun.lei@amd.com> Acked-by:
-
Wenjing Liu authored
[why] Unify pipe resource management logic in dc resource layer. V2: Add default case for switch. CC: Hamza Mahfooz <hamza.mahfooz@amd.com> Reviewed-by:
Chaitanya Dhere <chaitanya.dhere@amd.com> Signed-off-by:
Wenjing Liu <wenjing.liu@amd.com> Reviewed-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Tested-by:
-
Wenjing Liu authored
[why] Need DML2 to support new pipe resource management APIs. Reviewed-by:
-
