- 11 Jun, 2021 2 commits
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
One fix for snu4i that prevents it from probing, two locking fixes for ttm and drm_auth, one off-by-x1000 fix for mcde and a fix for vc4 to prevent an out-of-bounds access. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210610171653.lqsoadxrhdk73cdy@gilmour
-
https://gitlab.freedesktop.org/drm/msmDave Airlie authored
- NULL ptr deref fix - CP_PROTECT reg programming fix - incorrect register shift fix - DSI blank screen fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvbcz0=QxGYnX9u7cD1SCvFSx20dzrZuOccjtRRBTJd5Q@mail.gmail.com
-
- 10 Jun, 2021 2 commits
-
-
Stephen Boyd authored
A problem was reported on CoachZ devices where the display wouldn't come up, or it would be distorted. It turns out that the PLL code here wasn't getting called once dsi_pll_10nm_vco_recalc_rate() started returning the same exact frequency, down to the Hz, that the bootloader was setting instead of 0 when the clk was registered with the clk framework. After commit 001d8dc3 ("drm/msm/dsi: remove temp data from global pll structure") we use a hardcoded value for the parent clk frequency, i.e. VCO_REF_CLK_RATE, and we also hardcode the value for FRAC_BITS, instead of getting it from the config structure. This combination of changes to the recalc function allows us to properly calculate the frequency of the PLL regardless of whether or not the PLL has been clk_prepare()d or clk_set_rate()d. That's a good improvement. Unfortunately, this means that now we won't call down into the PLL clk driver when we call clk_set_rate() because the frequency calculated in the framework matches the frequency that is set in hardware. If the rate is the same as what we want it should be OK to not call the set_rate PLL op. The real problem is that the prepare op in this driver uses a private struct member to stash away the vco frequency so that it can call the set_rate op directly during prepare. Once the set_rate op is never called because recalc_rate told us the rate is the same, we don't set this private struct member before the prepare op runs, so we try to call the set_rate function directly with a frequency of 0. This effectively kills the PLL and configures it for a rate that won't work. Calling set_rate from prepare is really quite bad and will confuse any downstream clks about what the rate actually is of their parent. Fixing that will be a rather large change though so we leave that to later. For now, let's stash away the rate we calculate during recalc so that the prepare op knows what frequency to set, instead of 0. This way things keep working and the display can enable the PLL properly. In the future, we should remove that code from the prepare op so that it doesn't even try to call the set rate function. Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Abhinav Kumar <abhinavk@codeaurora.org> Fixes: 001d8dc3 ("drm/msm/dsi: remove temp data from global pll structure") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210608195519.125561-1-swboyd@chromium.orgSigned-off-by: Rob Clark <robdclark@chromium.org>
-
Desmond Cheong Zhi Xi authored
This patch eliminates the following smatch warning: drivers/gpu/drm/drm_auth.c:320 drm_master_release() warn: unlocked access 'master' (line 318) expected lock '&dev->master_mutex' The 'file_priv->master' field should be protected by the mutex lock to '&dev->master_mutex'. This is because other processes can concurrently modify this field and free the current 'file_priv->master' pointer. This could result in a use-after-free error when 'master' is dereferenced in subsequent function calls to 'drm_legacy_lock_master_cleanup()' or to 'drm_lease_revoke()'. An example of a scenario that would produce this error can be seen from a similar bug in 'drm_getunique()' that was reported by Syzbot: https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803 In the Syzbot report, another process concurrently acquired the device's master mutex in 'drm_setmaster_ioctl()', then overwrote 'fpriv->master' in 'drm_new_set_master()'. The old value of 'fpriv->master' was subsequently freed before the mutex was unlocked. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210609092119.173590-1-desmondcheongzx@gmail.com
-
- 09 Jun, 2021 1 commit
-
-
Linus Walleij authored
The calclulation of how many bytes we stuff into the DSI pipeline for video mode panels is off by three orders of magnitude because we did not account for the fact that the DRM mode clock is in kilohertz rather than hertz. This used to be: drm_mode_vrefresh(mode) * mode->htotal * mode->vtotal which would become for example for s6e63m0: 60 x 514 x 831 = 25628040 Hz, but mode->clock is 25628 as it is in kHz. This affects only the Samsung GT-I8190 "Golden" phone right now since it is the only MCDE device with a video mode display. Curiously some specimen work with this code and wild settings in the EOL and empty packets at the end of the display, but I have noticed an eeire flicker until now. Others were not so lucky and got black screens. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reported-by: Stephan Gerhold <stephan@gerhold.net> Fixes: 920dd1b1 ("drm/mcde: Use mode->clock instead of reverse calculating it from the vrefresh") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210608213318.3897858-1-linus.walleij@linaro.org
-
- 08 Jun, 2021 7 commits
-
-
Jonathan Marek authored
If a6xx_hw_init() fails before creating the shadow_bo, the a6xx_pm_suspend code referencing it will crash. Change the condition to one that avoids this problem (note: creation of shadow_bo is behind this same condition) Fixes: e8b0b994 ("drm/msm/a6xx: Clear shadow on suspend") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org> Link: https://lore.kernel.org/r/20210513171431.18632-6-jonathan@marek.caSigned-off-by: Rob Clark <robdclark@chromium.org>
-
Jonathan Marek authored
Value was shifted in the wrong direction, resulting in the field always being zero, which is incorrect for A650. Fixes: d0bac4e9 ("drm/msm/a6xx: set ubwc config for A640 and A650") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org> Link: https://lore.kernel.org/r/20210513171431.18632-4-jonathan@marek.caSigned-off-by: Rob Clark <robdclark@chromium.org>
-
Jonathan Marek authored
Update CP_PROTECT register programming based on downstream. A6XX_PROTECT_RW is renamed to A6XX_PROTECT_NORDWR to make things aligned and also be more clear about what it does. Note that this required switching to use the CP_ALWAYS_ON_COUNTER as the GMU counter is not accessible from the cmdstream. Which also means using the CPU counter for the msm_gpu_submit_flush() tracepoint (as catapult depends on being able to compare this to the start/end values captured in cmdstream). This may need to be revisited when IFPC is enabled. Also, compared to downstream, this opens up CP_PERFCTR_CP_SEL as the userspace performance tooling (fdperf and pps-producer) expect to be able to configure the CP counters. Fixes: 4b565ca5 ("drm/msm: Add A6XX device support") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org> Link: https://lore.kernel.org/r/20210513171431.18632-5-jonathan@marek.ca [switch to CP_ALWAYS_ON_COUNTER, open up CP_PERFCNTR_CP_SEL, and spiff up commit msg] Signed-off-by: Rob Clark <robdclark@chromium.org>
-
Alexey Minnekhanov authored
Fix NULL pointer dereference caused by update_inactive() trying to list_del() an uninitialized mm_list who's prev/next pointers are NULL. Fixes: 64fcbde7 ("drm/msm: Track potentially evictable objects") Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org> Link: https://lore.kernel.org/r/20210518102624.1193955-1-alexeymin@postmarketos.orgSigned-off-by: Rob Clark <robdclark@chromium.org>
-
Desmond Cheong Zhi Xi authored
There is a time-of-check-to-time-of-use error in drm_getunique() due to retrieving file_priv->master prior to locking the device's master mutex. An example can be seen in the crash report of the use-after-free error found by Syzbot: https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803 In the report, the master pointer was used after being freed. This is because another process had acquired the device's master mutex in drm_setmaster_ioctl(), then overwrote fpriv->master in drm_new_set_master(). The old value of fpriv->master was subsequently freed before the mutex was unlocked. To fix this, we lock the device's master mutex before retrieving the pointer from from fpriv->master. This patch passes the Syzbot reproducer test. Reported-by: syzbot+c3a706cec1ea99e1c693@syzkaller.appspotmail.com Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210608110436.239583-1-desmondcheongzx@gmail.com
-
Mark Rutland authored
In vc4_atomic_commit_tail() we iterate of the set of old CRTCs, and attempt to wait on any channels which are still in use. When we iterate over the CRTCs, we have: * `i` - the index of the CRTC * `channel` - the channel a CRTC is using When we check the channel state, we consult: old_hvs_state->fifo_state[channel].in_use ... but when we wait for the channel, we erroneously wait on: old_hvs_state->fifo_state[i].pending_commit ... rather than: old_hvs_state->fifo_state[channel].pending_commit ... and this bogus access has been observed to result in boot-time hangs on some arm64 configurations, and can be detected using KASAN. FIx this by using the correct index. I've tested this on a Raspberry Pi 3 model B v1.2 with KASAN. Trimmed KASAN splat: | ================================================================== | BUG: KASAN: slab-out-of-bounds in vc4_atomic_commit_tail+0x1cc/0x910 | Read of size 8 at addr ffff000007360440 by task kworker/u8:0/7 | CPU: 2 PID: 7 Comm: kworker/u8:0 Not tainted 5.13.0-rc3-00009-g694c523e7267 #3 | | Hardware name: Raspberry Pi 3 Model B (DT) | Workqueue: events_unbound deferred_probe_work_func | Call trace: | dump_backtrace+0x0/0x2b4 | show_stack+0x1c/0x30 | dump_stack+0xfc/0x168 | print_address_description.constprop.0+0x2c/0x2c0 | kasan_report+0x1dc/0x240 | __asan_load8+0x98/0xd4 | vc4_atomic_commit_tail+0x1cc/0x910 | commit_tail+0x100/0x210 | ... | | Allocated by task 7: | kasan_save_stack+0x2c/0x60 | __kasan_kmalloc+0x90/0xb4 | vc4_hvs_channels_duplicate_state+0x60/0x1a0 | drm_atomic_get_private_obj_state+0x144/0x230 | vc4_atomic_check+0x40/0x73c | drm_atomic_check_only+0x998/0xe60 | drm_atomic_commit+0x34/0x94 | drm_client_modeset_commit_atomic+0x2f4/0x3a0 | drm_client_modeset_commit_locked+0x8c/0x230 | drm_client_modeset_commit+0x38/0x60 | drm_fb_helper_set_par+0x104/0x17c | fbcon_init+0x43c/0x970 | visual_init+0x14c/0x1e4 | ... | | The buggy address belongs to the object at ffff000007360400 | which belongs to the cache kmalloc-128 of size 128 | The buggy address is located 64 bytes inside of | 128-byte region [ffff000007360400, ffff000007360480) | The buggy address belongs to the page: | page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7360 | flags: 0x3fffc0000000200(slab|node=0|zone=0|lastcpupid=0xffff) | raw: 03fffc0000000200 dead000000000100 dead000000000122 ffff000004c02300 | raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 | page dumped because: kasan: bad access detected | | Memory state around the buggy address: | ffff000007360300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb | ffff000007360380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc | >ffff000007360400: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc | ^ | ffff000007360480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc | ffff000007360500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb | ================================================================== Link: https://lore.kernel.org/r/4d0c8318-bad8-2be7-e292-fc8f70c198de@samsung.com Link: https://lore.kernel.org/linux-arm-kernel/20210607151740.moncryl5zv3ahq4s@gilmourSigned-off-by: Mark Rutland <mark.rutland@arm.com> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Emma Anholt <emma@anholt.net> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Will Deacon <will@kernel.org> Cc: dri-devel@lists.freedesktop.org Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210608085513.2069-1-mark.rutland@arm.com
-
Christian König authored
We need to grab the resv lock first before doing that check. v2 (chk): simplify the change for -fixes Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210528130041.1683-1-christian.koenig@amd.com
-
- 07 Jun, 2021 1 commit
-
-
Saravana Kannan authored
On sunxi boards that use HDMI output, HDMI device probe keeps being avoided indefinitely with these repeated messages in dmesg: platform 1ee0000.hdmi: probe deferral - supplier 1ef0000.hdmi-phy not ready There's a fwnode_link being created with fw_devlink=on between hdmi and hdmi-phy nodes, because both nodes have 'compatible' property set. Fw_devlink code assumes that nodes that have compatible property set will also have a device associated with them by some driver eventually. This is not the case with the current sun8i-hdmi driver. This commit makes sun8i-hdmi-phy into a proper platform device and fixes the display pipeline probe on sunxi boards that use HDMI. More context: https://lkml.org/lkml/2021/5/16/203Signed-off-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Ondrej Jirman <megous@megous.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210607085836.2827429-1-megous@megous.com
-
- 06 Jun, 2021 11 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Five small and fairly minor fixes, all in drivers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: scsi_devinfo: Add blacklist entry for HPE OPEN-V scsi: ufs: ufs-mediatek: Fix HCI version in some platforms scsi: qedf: Do not put host in qedf_vport_create() unconditionally scsi: lpfc: Fix failure to transmit ABTS on FC link scsi: target: core: Fix warning on realtime kernels
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Miscellaneous ext4 bug fixes" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Only advertise encrypted_casefold when encryption and unicode are enabled ext4: fix no-key deletion for encrypt+casefold ext4: fix memory leak in ext4_fill_super ext4: fix fast commit alignment issues ext4: fix bug on in ext4_es_cache_extent as ext4_split_extent_at failed ext4: fix accessing uninit percpu counter variable with fast_commit ext4: fix memory leak in ext4_mb_init_backend on error path.
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A set of fixes that have been coming in over the last few weeks, the usual mix of fixes: - DT fixups for TI K3 - SATA drive detection fix for TI DRA7 - Power management fixes and a few build warning removals for OMAP - OP-TEE fix to use standard API for UUID exporting - DT fixes for a handful of i.MX boards And a few other smaller items" * tag 'arm-soc-fixes-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits) arm64: meson: select COMMON_CLK soc: amlogic: meson-clk-measure: remove redundant dev_err call in meson_msr_probe() ARM: OMAP1: ams-delta: remove unused function ams_delta_camera_power bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_act ARM: dts: imx: emcon-avari: Fix nxp,pca8574 #gpio-cells ARM: dts: imx7d-pico: Fix the 'tuning-step' property ARM: dts: imx7d-meerkat96: Fix the 'tuning-step' property arm64: dts: freescale: sl28: var1: fix RGMII clock and voltage arm64: dts: freescale: sl28: var4: fix RGMII clock and voltage ARM: imx: pm-imx27: Include "common.h" arm64: dts: zii-ultra: fix 12V_MAIN voltage arm64: dts: zii-ultra: remove second GEN_3V3 regulator instance arm64: dts: ls1028a: fix memory node bus: ti-sysc: Fix am335x resume hang for usb otg module ARM: OMAP2+: Fix build warning when mmc_omap is not built ARM: OMAP1: isp1301-omap: Add missing gpiod_add_lookup_table function ARM: OMAP1: Fix use of possibly uninitialized irq variable optee: use export_uuid() to copy client UUID arm64: dts: ti: k3*: Introduce reg definition for interrupt routers arm64: dts: ti: k3-am65|j721e|am64: Map the dma / navigator subsystem via explicit ranges ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Fix our KVM reverse map real-mode handling since we enabled huge vmalloc (in some configurations). Revert a recent change to our IOMMU code which broke some devices. Fix KVM handling of FSCR on P7/P8, which could have possibly let a guest crash it's Qemu. Fix kprobes validation of prefixed instructions across page boundary. Thanks to Alexey Kardashevskiy, Christophe Leroy, Fabiano Rosas, Frederic Barrat, Naveen N. Rao, and Nicholas Piggin" * tag 'powerpc-5.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: Revert "powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs" KVM: PPC: Book3S HV: Save host FSCR in the P7/8 path powerpc: Fix reverse map real-mode address lookup with huge vmalloc powerpc/kprobes: Fix validation of prefixed instructions across page boundary
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: "A bunch of x86/urgent stuff accumulated for the last two weeks so lemme unload it to you. It should be all totally risk-free, of course. :-) - Fix out-of-spec hardware (1st gen Hygon) which does not implement MSR_AMD64_SEV even though the spec clearly states so, and check CPUID bits first. - Send only one signal to a task when it is a SEGV_PKUERR si_code type. - Do away with all the wankery of reserving X amount of memory in the first megabyte to prevent BIOS corrupting it and simply and unconditionally reserve the whole first megabyte. - Make alternatives NOP optimization work at an arbitrary position within the patched sequence because the compiler can put single-byte NOPs for alignment anywhere in the sequence (32-bit retpoline), vs our previous assumption that the NOPs are only appended. - Force-disable ENQCMD[S] instructions support and remove update_pasid() because of insufficient protection against FPU state modification in an interrupt context, among other xstate horrors which are being addressed at the moment. This one limits the fallout until proper enablement. - Use cpu_feature_enabled() in the idxd driver so that it can be build-time disabled through the defines in disabled-features.h. - Fix LVT thermal setup for SMI delivery mode by making sure the APIC LVT value is read before APIC initialization so that softlockups during boot do not happen at least on one machine. - Mark all legacy interrupts as legacy vectors when the IO-APIC is disabled and when all legacy interrupts are routed through the PIC" * tag 'x86_urgent_for_v5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sev: Check SME/SEV support in CPUID first x86/fault: Don't send SIGSEGV twice on SEGV_PKUERR x86/setup: Always reserve the first 1M of RAM x86/alternative: Optimize single-byte NOPs at an arbitrary position x86/cpufeatures: Force disable X86_FEATURE_ENQCMD and remove update_pasid() dmaengine: idxd: Use cpu_feature_enabled() x86/thermal: Fix LVT thermal setup for SMI delivery mode x86/apic: Mark _all_ legacy interrupts when IO/APIC is missing
-
Daniel Rosenberg authored
Encrypted casefolding is only supported when both encryption and casefolding are both enabled in the config. Fixes: 471fbbea ("ext4: handle casefolding with encryption") Cc: stable@vger.kernel.org # 5.13+ Signed-off-by: Daniel Rosenberg <drosen@google.com> Link: https://lore.kernel.org/r/20210603094849.314342-1-drosen@google.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Daniel Rosenberg authored
commit 471fbbea ("ext4: handle casefolding with encryption") is missing a few checks for the encryption key which are needed to support deleting enrypted casefolded files when the key is not present. This bug made it impossible to delete encrypted+casefolded directories without the encryption key, due to errors like: W : EXT4-fs warning (device vdc): __ext4fs_dirhash:270: inode #49202: comm Binder:378_4: Siphash requires key Repro steps in kvm-xfstests test appliance: mkfs.ext4 -F -E encoding=utf8 -O encrypt /dev/vdc mount /vdc mkdir /vdc/dir chattr +F /vdc/dir keyid=$(head -c 64 /dev/zero | xfs_io -c add_enckey /vdc | awk '{print $NF}') xfs_io -c "set_encpolicy $keyid" /vdc/dir for i in `seq 1 100`; do mkdir /vdc/dir/$i done xfs_io -c "rm_enckey $keyid" /vdc rm -rf /vdc/dir # fails with the bug Fixes: 471fbbea ("ext4: handle casefolding with encryption") Signed-off-by: Daniel Rosenberg <drosen@google.com> Link: https://lore.kernel.org/r/20210522004132.2142563-1-drosen@google.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Alexey Makhalov authored
Buffer head references must be released before calling kill_bdev(); otherwise the buffer head (and its page referenced by b_data) will not be freed by kill_bdev, and subsequently that bh will be leaked. If blocksizes differ, sb_set_blocksize() will kill current buffers and page cache by using kill_bdev(). And then super block will be reread again but using correct blocksize this time. sb_set_blocksize() didn't fully free superblock page and buffer head, and being busy, they were not freed and instead leaked. This can easily be reproduced by calling an infinite loop of: systemctl start <ext4_on_lvm>.mount, and systemctl stop <ext4_on_lvm>.mount ... since systemd creates a cgroup for each slice which it mounts, and the bh leak get amplified by a dying memory cgroup that also never gets freed, and memory consumption is much more easily noticed. Fixes: ce40733c ("ext4: Check for return value from sb_set_blocksize") Fixes: ac27a0ec ("ext4: initial copy of files from ext3") Link: https://lore.kernel.org/r/20210521075533.95732-1-amakhalov@vmware.comSigned-off-by: Alexey Makhalov <amakhalov@vmware.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
-
Harshad Shirwadkar authored
Fast commit recovery data on disk may not be aligned. So, when the recovery code reads it, this patch makes sure that fast commit info found on-disk is first memcpy-ed into an aligned variable before accessing it. As a consequence of it, we also remove some macros that could resulted in unaligned accesses. Cc: stable@kernel.org Fixes: 8016e29f ("ext4: fast commit recovery path") Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20210519215920.2037527-1-harshads@google.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Ye Bin authored
We got follow bug_on when run fsstress with injecting IO fault: [130747.323114] kernel BUG at fs/ext4/extents_status.c:762! [130747.323117] Internal error: Oops - BUG: 0 [#1] SMP ...... [130747.334329] Call trace: [130747.334553] ext4_es_cache_extent+0x150/0x168 [ext4] [130747.334975] ext4_cache_extents+0x64/0xe8 [ext4] [130747.335368] ext4_find_extent+0x300/0x330 [ext4] [130747.335759] ext4_ext_map_blocks+0x74/0x1178 [ext4] [130747.336179] ext4_map_blocks+0x2f4/0x5f0 [ext4] [130747.336567] ext4_mpage_readpages+0x4a8/0x7a8 [ext4] [130747.336995] ext4_readpage+0x54/0x100 [ext4] [130747.337359] generic_file_buffered_read+0x410/0xae8 [130747.337767] generic_file_read_iter+0x114/0x190 [130747.338152] ext4_file_read_iter+0x5c/0x140 [ext4] [130747.338556] __vfs_read+0x11c/0x188 [130747.338851] vfs_read+0x94/0x150 [130747.339110] ksys_read+0x74/0xf0 This patch's modification is according to Jan Kara's suggestion in: https://patchwork.ozlabs.org/project/linux-ext4/patch/20210428085158.3728201-1-yebin10@huawei.com/ "I see. Now I understand your patch. Honestly, seeing how fragile is trying to fix extent tree after split has failed in the middle, I would probably go even further and make sure we fix the tree properly in case of ENOSPC and EDQUOT (those are easily user triggerable). Anything else indicates a HW problem or fs corruption so I'd rather leave the extent tree as is and don't try to fix it (which also means we will not create overlapping extents)." Cc: stable@kernel.org Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210506141042.3298679-1-yebin10@huawei.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
- 05 Jun, 2021 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Some more bugfixes from I2C for v5.13. Usual stuff" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: qcom-geni: Suspend and resume the bus during SYSTEM_SLEEP_PM ops i2c: qcom-geni: Add shutdown callback for i2c i2c: tegra-bpmp: Demote kernel-doc abuses i2c: altera: Fix formatting issue in struct and demote unworthy kernel-doc headers
-
Olof Johansson authored
Merge tag 'ti-k3-dt-fixes-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/fixes Devicetree fixes for TI K3 platforms for v5.13 merge window: These minor fixes include: * Fixups for device tree discovered during yaml conversion * Fixups for missing dma-coherent property in j7200 * Removal of camera sensor node from am65 evm dts to overlay as camera sensor boards are variable. * tag 'ti-k3-dt-fixes-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: arm64: dts: ti: k3*: Introduce reg definition for interrupt routers arm64: dts: ti: k3-am65|j721e|am64: Map the dma / navigator subsystem via explicit ranges arm64: dts: ti: k3-*: Rename the TI-SCI node arm64: dts: ti: k3-am65-wakeup: Drop un-necessary properties from dmsc node arm64: dts: ti: k3-am65-wakeup: Add debug region to TI-SCI node arm64: dts: ti: k3-*: Rename the TI-SCI clocks node name arm64: dts: ti: j7200-main: Mark Main NAVSS as dma-coherent arm64: dts: ti: k3-am654-base-board: remove ov5640 Link: https://lore.kernel.org/r/20210518115634.467vgpbzplal5kou@obituarySigned-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'optee-fix-for-v5.13' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes OP-TEE use export_uuid() to copy UUID * tag 'optee-fix-for-v5.13' of git://git.linaro.org/people/jens.wiklander/linux-tee: optee: use export_uuid() to copy client UUID Link: https://lore.kernel.org/r/20210518100712.GA449561@jadeSigned-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'omap-for-v5.13/fixes-pm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes PM and build warning fixes for omaps While chasing system suspend related regressions, I noticed few other issues related to PM would be good to have fixed: - UART idling does not always work for hardware autoidle features - am335x resume works only the first time unless musb module is loaded Then there are three patches for omap1 related warnings caused by the gpio changes, and one build warning fix for legacy mmc platform code when mmc is built as a loadable module. These can all be merged whenever suitable naturally. I've sent the more urgent SATA regression fix separately although it appears in this pull request too because of the branches merged. * tag 'omap-for-v5.13/fixes-pm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP1: ams-delta: remove unused function ams_delta_camera_power bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_act bus: ti-sysc: Fix am335x resume hang for usb otg module ARM: OMAP2+: Fix build warning when mmc_omap is not built ARM: OMAP1: isp1301-omap: Add missing gpiod_add_lookup_table function ARM: OMAP1: Fix use of possibly uninitialized irq variable Link: https://lore.kernel.org/r/pull-1622614772-543196@atomide.comSigned-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'omap-for-v5.13/fixes-sata' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Regression fix for TI dra7 SATA not detecting drives The SATA quirk flags are no missing With recent removal of legacy platform data and we need to add the quirk flags to detect drives. * tag 'omap-for-v5.13/fixes-sata' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Fix missing quirk flags for sata Link: https://lore.kernel.org/r/pull-1622613578-121536@atomide.comSigned-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'amlogic-fixes-v5.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/fixes Amlogic fixes for v5.13-rc1 - arm64: meson: select COMMON_CLK to select a proper implementation of the clock API - soc: amlogic: meson-clk-measure: remove redundant dev_err call in meson_msr_probe() * tag 'amlogic-fixes-v5.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: meson: select COMMON_CLK soc: amlogic: meson-clk-measure: remove redundant dev_err call in meson_msr_probe() Link: https://lore.kernel.org/r/73e76706-f3f4-bebf-10dd-d2ec9106a234@baylibre.comSigned-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'imx-fixes-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.13: - Fix missing-prototypes warning of 'imx27_pm_init' in i.MX27 platform pm code. - A couple of patches from Fabio Estevam to fix 'tuning-step' property in imx7d-meerkat96 and imx7d-pico DT. - Fix '#gpio-cells' of nxp,pca8574 device in imx6qdl-emcon-avari DT. - A couple of patches from Lucas Stach to fix regulator and voltage for imx8mq-zii-ultra board. - Add missing regulators for imx6q-dhcom to avoid possible instability issues. - Fix memory-controller settings for fsl-ls1028a DT. - Fix RGMII clock and voltage for a couple of fsl-ls1028a-kontron-sl28 boards. - Fix RGMII connection to QCA8334 switch for imx6dl-yapp4 board. * tag 'imx-fixes-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx: emcon-avari: Fix nxp,pca8574 #gpio-cells ARM: dts: imx7d-pico: Fix the 'tuning-step' property ARM: dts: imx7d-meerkat96: Fix the 'tuning-step' property arm64: dts: freescale: sl28: var1: fix RGMII clock and voltage arm64: dts: freescale: sl28: var4: fix RGMII clock and voltage ARM: imx: pm-imx27: Include "common.h" arm64: dts: zii-ultra: fix 12V_MAIN voltage arm64: dts: zii-ultra: remove second GEN_3V3 regulator instance arm64: dts: ls1028a: fix memory node ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators ARM: dts: imx6dl-yapp4: Fix RGMII connection to QCA8334 switch Link: https://lore.kernel.org/r/20210527011758.GD8194@dragonSigned-off-by: Olof Johansson <olof@lixom.net>
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "13 patches. Subsystems affected by this patch series: mips, mm (kfence, debug, pagealloc, memory-hotplug, hugetlb, kasan, and hugetlb), init, proc, lib, ocfs2, and mailmap" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mailmap: use private address for Michel Lespinasse ocfs2: fix data corruption by fallocate lib: crc64: fix kernel-doc warning mm, hugetlb: fix simple resv_huge_pages underflow on UFFDIO_COPY mm/kasan/init.c: fix doc warning proc: add .gitignore for proc-subset-pid selftest hugetlb: pass head page to remove_hugetlb_page() drivers/base/memory: fix trying offlining memory blocks with memory holes on aarch64 mm/page_alloc: fix counting of free pages after take off from buddy mm/debug_vm_pgtable: fix alignment for pmd/pud_advanced_tests() pid: take a reference when initializing `cad_pid` kfence: use TASK_IDLE when awaiting allocation Revert "MIPS: make userspace mapping young by default"
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: - Build with '-mno-relax' when using LLVM's linker, which doesn't support linker relaxation. - A fix to build without SiFive's errata. - A fix to use PAs during init_resources() - A fix to avoid W+X mappings during boot. * tag 'riscv-for-linus-5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Fix memblock_free() usages in init_resources() riscv: skip errata_cip_453.o if CONFIG_ERRATA_SIFIVE_CIP_453 is disabled riscv: mm: Fix W+X mappings at boot riscv: Use -mno-relax when using lld linker
-
Michel Lespinasse authored
Link: https://lkml.kernel.org/r/20210602221225.49446-1-michel@lespinasse.orgSigned-off-by: Michel Lespinasse <michel@lespinasse.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Junxiao Bi authored
When fallocate punches holes out of inode size, if original isize is in the middle of last cluster, then the part from isize to the end of the cluster will be zeroed with buffer write, at that time isize is not yet updated to match the new size, if writeback is kicked in, it will invoke ocfs2_writepage()->block_write_full_page() where the pages out of inode size will be dropped. That will cause file corruption. Fix this by zero out eof blocks when extending the inode size. Running the following command with qemu-image 4.2.1 can get a corrupted coverted image file easily. qemu-img convert -p -t none -T none -f qcow2 $qcow_image \ -O qcow2 -o compat=1.1 $qcow_image.conv The usage of fallocate in qemu is like this, it first punches holes out of inode size, then extend the inode size. fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 2276196352, 65536) = 0 fallocate(11, 0, 2276196352, 65536) = 0 v1: https://www.spinics.net/lists/linux-fsdevel/msg193999.html v2: https://lore.kernel.org/linux-fsdevel/20210525093034.GB4112@quack2.suse.cz/T/ Link: https://lkml.kernel.org/r/20210528210648.9124-1-junxiao.bi@oracle.comSigned-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Jan Kara <jack@suse.cz> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
YueHaibing authored
Fix W=1 kernel build warning: lib/crc64.c:40: warning: bad line: or the previous crc64 value if computing incrementally. Link: https://lkml.kernel.org/r/20210601135851.15444-1-yuehaibing@huawei.comSigned-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Coly Li <colyli@suse.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mina Almasry authored
The userfaultfd hugetlb tests cause a resv_huge_pages underflow. This happens when hugetlb_mcopy_atomic_pte() is called with !is_continue on an index for which we already have a page in the cache. When this happens, we allocate a second page, double consuming the reservation, and then fail to insert the page into the cache and return -EEXIST. To fix this, we first check if there is a page in the cache which already consumed the reservation, and return -EEXIST immediately if so. There is still a rare condition where we fail to copy the page contents AND race with a call for hugetlb_no_page() for this index and again we will underflow resv_huge_pages. That is fixed in a more complicated patch not targeted for -stable. Test: Hacked the code locally such that resv_huge_pages underflows produce a warning, then: ./tools/testing/selftests/vm/userfaultfd hugetlb_shared 10 2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success ./tools/testing/selftests/vm/userfaultfd hugetlb 10 2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success Both tests succeed and produce no warnings. After the test runs number of free/resv hugepages is correct. [mike.kravetz@oracle.com: changelog fixes] Link: https://lkml.kernel.org/r/20210528004649.85298-1-almasrymina@google.com Fixes: 8fb5debc ("userfaultfd: hugetlbfs: add hugetlb_mcopy_atomic_pte for userfaultfd support") Signed-off-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Yu Kuai authored
Fix gcc W=1 warning: mm/kasan/init.c:228: warning: Function parameter or member 'shadow_start' not described in 'kasan_populate_early_shadow' mm/kasan/init.c:228: warning: Function parameter or member 'shadow_end' not described in 'kasan_populate_early_shadow' Link: https://lkml.kernel.org/r/20210603140700.3045298-1-yukuai3@huawei.comSigned-off-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Matlack authored
This new selftest needs an entry in the .gitignore file otherwise git will try to track the binary. Link: https://lkml.kernel.org/r/20210601164305.11776-1-dmatlack@google.com Fixes: 268af17a ("selftests: proc: test subset=pid") Signed-off-by: David Matlack <dmatlack@google.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alexey Gladkov <gladkov.alexey@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Naoya Horiguchi authored
When memory_failure() or soft_offline_page() is called on a tail page of some hugetlb page, "BUG: unable to handle page fault" error can be triggered. remove_hugetlb_page() dereferences page->lru, so it's assumed that the page points to a head page, but one of the caller, dissolve_free_huge_page(), provides remove_hugetlb_page() with 'page' which could be a tail page. So pass 'head' to it, instead. Link: https://lkml.kernel.org/r/20210526235257.2769473-1-nao.horiguchi@gmail.com Fixes: 6eb4e88a ("hugetlb: create remove_hugetlb_page() to separate functionality") Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-