- 13 Apr, 2018 40 commits
-
-
Eric Dumazet authored
[ Upstream commit bfacfb45 ] Once dst has been cached in socket via sk_setup_caps(), it is illegal to call ip_rt_put() (or dst_release()), since sk_setup_caps() did not change dst refcount. We can still dereference it since we hold socket lock. Caugth by syzbot : BUG: KASAN: use-after-free in atomic_dec_return include/asm-generic/atomic-instrumented.h:198 [inline] BUG: KASAN: use-after-free in dst_release+0x27/0xa0 net/core/dst.c:185 Write of size 4 at addr ffff8801c54dc040 by task syz-executor4/20088 CPU: 1 PID: 20088 Comm: syz-executor4 Not tainted 4.16.0+ #376 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x1a7/0x27d lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report+0x23c/0x360 mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x137/0x190 mm/kasan/kasan.c:267 kasan_check_write+0x14/0x20 mm/kasan/kasan.c:278 atomic_dec_return include/asm-generic/atomic-instrumented.h:198 [inline] dst_release+0x27/0xa0 net/core/dst.c:185 sk_dst_set include/net/sock.h:1812 [inline] sk_dst_reset include/net/sock.h:1824 [inline] sock_setbindtodevice net/core/sock.c:610 [inline] sock_setsockopt+0x431/0x1b20 net/core/sock.c:707 SYSC_setsockopt net/socket.c:1845 [inline] SyS_setsockopt+0x2ff/0x360 net/socket.c:1828 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x4552d9 RSP: 002b:00007f4878126c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00007f48781276d4 RCX: 00000000004552d9 RDX: 0000000000000019 RSI: 0000000000000001 RDI: 0000000000000013 RBP: 000000000072bea0 R08: 0000000000000010 R09: 0000000000000000 R10: 00000000200010c0 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000526 R14: 00000000006fac30 R15: 0000000000000000 Allocated by task 20088: save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:552 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489 kmem_cache_alloc+0x12e/0x760 mm/slab.c:3542 dst_alloc+0x11f/0x1a0 net/core/dst.c:104 rt_dst_alloc+0xe9/0x540 net/ipv4/route.c:1520 __mkroute_output net/ipv4/route.c:2265 [inline] ip_route_output_key_hash_rcu+0xa49/0x2c60 net/ipv4/route.c:2493 ip_route_output_key_hash+0x20b/0x370 net/ipv4/route.c:2322 __ip_route_output_key include/net/route.h:126 [inline] ip_route_output_flow+0x26/0xa0 net/ipv4/route.c:2577 ip_route_output_ports include/net/route.h:163 [inline] pptp_connect+0xa84/0x1170 drivers/net/ppp/pptp.c:453 SYSC_connect+0x213/0x4a0 net/socket.c:1639 SyS_connect+0x24/0x30 net/socket.c:1620 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Freed by task 20082: save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 [inline] __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:520 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:527 __cache_free mm/slab.c:3486 [inline] kmem_cache_free+0x83/0x2a0 mm/slab.c:3744 dst_destroy+0x266/0x380 net/core/dst.c:140 dst_destroy_rcu+0x16/0x20 net/core/dst.c:153 __rcu_reclaim kernel/rcu/rcu.h:178 [inline] rcu_do_batch kernel/rcu/tree.c:2675 [inline] invoke_rcu_callbacks kernel/rcu/tree.c:2930 [inline] __rcu_process_callbacks kernel/rcu/tree.c:2897 [inline] rcu_process_callbacks+0xd6c/0x17b0 kernel/rcu/tree.c:2914 __do_softirq+0x2d7/0xb85 kernel/softirq.c:285 The buggy address belongs to the object at ffff8801c54dc000 which belongs to the cache ip_dst_cache of size 168 The buggy address is located 64 bytes inside of 168-byte region [ffff8801c54dc000, ffff8801c54dc0a8) The buggy address belongs to the page: page:ffffea0007153700 count:1 mapcount:0 mapping:ffff8801c54dc000 index:0x0 flags: 0x2fffc0000000100(slab) raw: 02fffc0000000100 ffff8801c54dc000 0000000000000000 0000000100000010 raw: ffffea0006b34b20 ffffea0006b6c1e0 ffff8801d674a1c0 0000000000000000 page dumped because: kasan: bad access detected Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Davide Caratti authored
[ Upstream commit 3239534a ] when tcf_bpf_init_from_ops() fails (e.g. because of program having invalid number of instructions), tcf_bpf_cfg_cleanup() calls bpf_prog_put(NULL) or bpf_prog_destroy(NULL). Unless CONFIG_BPF_SYSCALL is unset, this causes the following error: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 PGD 800000007345a067 P4D 800000007345a067 PUD 340e1067 PMD 0 Oops: 0000 [#1] SMP PTI Modules linked in: act_bpf(E) ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache jbd2 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic pcbc snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd glue_helper cryptd joydev snd_timer snd virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_blk drm virtio_net virtio_console i2c_core crc32c_intel serio_raw virtio_pci ata_piix libata virtio_ring floppy virtio dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_bpf] CPU: 3 PID: 5654 Comm: tc Tainted: G E 4.16.0.bpf_test+ #408 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:__bpf_prog_put+0xc/0xc0 RSP: 0018:ffff9594003ef728 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff9594003ef758 RCX: 0000000000000024 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 R10: 0000000000000220 R11: ffff8a7ab9f17131 R12: 0000000000000000 R13: ffff8a7ab7c3c8e0 R14: 0000000000000001 R15: ffff8a7ab88f1054 FS: 00007fcb2f17c740(0000) GS:ffff8a7abfd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000020 CR3: 000000007c888006 CR4: 00000000001606e0 Call Trace: tcf_bpf_cfg_cleanup+0x2f/0x40 [act_bpf] tcf_bpf_cleanup+0x4c/0x70 [act_bpf] __tcf_idr_release+0x79/0x140 tcf_bpf_init+0x125/0x330 [act_bpf] tcf_action_init_1+0x2cc/0x430 ? get_page_from_freelist+0x3f0/0x11b0 tcf_action_init+0xd3/0x1b0 tc_ctl_action+0x18b/0x240 rtnetlink_rcv_msg+0x29c/0x310 ? _cond_resched+0x15/0x30 ? __kmalloc_node_track_caller+0x1b9/0x270 ? rtnl_calcit.isra.29+0x100/0x100 netlink_rcv_skb+0xd2/0x110 netlink_unicast+0x17c/0x230 netlink_sendmsg+0x2cd/0x3c0 sock_sendmsg+0x30/0x40 ___sys_sendmsg+0x27a/0x290 ? mem_cgroup_commit_charge+0x80/0x130 ? page_add_new_anon_rmap+0x73/0xc0 ? do_anonymous_page+0x2a2/0x560 ? __handle_mm_fault+0xc75/0xe20 __sys_sendmsg+0x58/0xa0 do_syscall_64+0x6e/0x1a0 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x7fcb2e58eba0 RSP: 002b:00007ffc93c496c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ffc93c497f0 RCX: 00007fcb2e58eba0 RDX: 0000000000000000 RSI: 00007ffc93c49740 RDI: 0000000000000003 RBP: 000000005ac6a646 R08: 0000000000000002 R09: 0000000000000000 R10: 00007ffc93c49120 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffc93c49804 R14: 0000000000000001 R15: 000000000066afa0 Code: 5f 00 48 8b 43 20 48 c7 c7 70 2f 7c b8 c7 40 10 00 00 00 00 5b e9 a5 8b 61 00 0f 1f 44 00 00 0f 1f 44 00 00 41 54 55 48 89 fd 53 <48> 8b 47 20 f0 ff 08 74 05 5b 5d 41 5c c3 41 89 f4 0f 1f 44 00 RIP: __bpf_prog_put+0xc/0xc0 RSP: ffff9594003ef728 CR2: 0000000000000020 Fix it in tcf_bpf_cfg_cleanup(), ensuring that bpf_prog_{put,destroy}(f) is called only when f is not NULL. Fixes: bbc09e78 ("net/sched: fix idr leak on the error path of tcf_bpf_init()") Reported-by:
Lucas Bates <lucasb@mojatatu.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Alexander Potapenko authored
[ Upstream commit 78802879 ] KMSAN reports use of uninitialized memory in the case when |alen| is smaller than sizeof(struct sockaddr_nl), and therefore |nladdr| isn't fully copied from the userspace. Signed-off-by:
Alexander Potapenko <glider@google.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by:
-
Jeff Barnhill authored
[ Upstream commit 71a1c915 ] At the end of ip6_forward(), IPSTATS_MIB_OUTFORWDATAGRAMS and IPSTATS_MIB_OUTOCTETS are incremented immediately before the NF_HOOK call for NFPROTO_IPV6 / NF_INET_FORWARD. As a result, these counters get incremented regardless of whether or not the netfilter hook allows the packet to continue being processed. This change increments the counters in ip6_forward_finish() so that it will not happen if the netfilter hook chooses to terminate the packet, which is similar to how IPv4 works. Signed-off-by:
Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit b6cdbc85 ] Donald reported that IPv6 route leaking between VRFs is not working. The root cause is the strict argument in the call to rt6_lookup when validating the nexthop spec. ip6_route_check_nh validates the gateway and device (if given) of a route spec. It in turn could call rt6_lookup (e.g., lookup in a given table did not succeed so it falls back to a full lookup) and if so sets the strict argument to 1. That means if the egress device is given, the route lookup needs to return a result with the same device. This strict requirement does not work with VRFs (IPv4 or IPv6) because the oif in the flow struct is overridden with the index of the VRF device to trigger a match on the l3mdev rule and force the lookup to its table. The right long term solution is to add an l3mdev index to the flow struct such that the oif is not overridden. That solution will not backport well, so this patch aims for a simpler solution to relax the strict argument if the route spec device is an l3mdev slave. As done in other places, use the FLOWI_FLAG_SKIP_NH_OIF to know that the RT6_LOOKUP_F_IFACE flag needs to be removed. Fixes: ca254490 ("net: Add VRF support to IPv6 stack") Reported-by:
Donald Sharp <sharpd@cumulusnetworks.com> Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 1dfe82eb ] skb mac header is not necessarily set at the time skb_network_protocol() is called. Use skb->data instead. BUG: KASAN: slab-out-of-bounds in skb_network_protocol+0x46b/0x4b0 net/core/dev.c:2739 Read of size 2 at addr ffff8801b3097a0b by task syz-executor5/14242 CPU: 1 PID: 14242 Comm: syz-executor5 Not tainted 4.16.0-rc6+ #280 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x24d lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report+0x23c/0x360 mm/kasan/report.c:412 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/report.c:443 skb_network_protocol+0x46b/0x4b0 net/core/dev.c:2739 harmonize_features net/core/dev.c:2924 [inline] netif_skb_features+0x509/0x9b0 net/core/dev.c:3011 validate_xmit_skb+0x81/0xb00 net/core/dev.c:3084 validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3142 packet_direct_xmit+0x117/0x790 net/packet/af_packet.c:256 packet_snd net/packet/af_packet.c:2944 [inline] packet_sendmsg+0x3aed/0x60b0 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xca/0x110 net/socket.c:639 ___sys_sendmsg+0x767/0x8b0 net/socket.c:2047 __sys_sendmsg+0xe5/0x210 net/socket.c:2081 Fixes: 19acc327 ("gso: Handle Trans-Ether-Bridging protocol in skb_network_protocol()") Signed-off-by:
Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 10b8a3de ] While building ipv6 datagram we currently allow arbitrary large extheaders, even beyond pmtu size. The syzbot has found a way to exploit the above to trigger the following splat: kernel BUG at ./include/linux/skbuff.h:2073! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 4230 Comm: syzkaller672661 Not tainted 4.16.0-rc2+ #326 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__skb_pull include/linux/skbuff.h:2073 [inline] RIP: 0010:__ip6_make_skb+0x1ac8/0x2190 net/ipv6/ip6_output.c:1636 RSP: 0018:ffff8801bc18f0f0 EFLAGS: 00010293 RAX: ffff8801b17400c0 RBX: 0000000000000738 RCX: ffffffff84f01828 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8801b415ac18 RBP: ffff8801bc18f360 R08: ffff8801b4576844 R09: 0000000000000000 R10: ffff8801bc18f380 R11: ffffed00367aee4e R12: 00000000000000d6 R13: ffff8801b415a740 R14: dffffc0000000000 R15: ffff8801b45767c0 FS: 0000000001535880(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002000b000 CR3: 00000001b4123001 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip6_finish_skb include/net/ipv6.h:969 [inline] udp_v6_push_pending_frames+0x269/0x3b0 net/ipv6/udp.c:1073 udpv6_sendmsg+0x2a96/0x3400 net/ipv6/udp.c:1343 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:764 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg+0xca/0x110 net/socket.c:640 ___sys_sendmsg+0x320/0x8b0 net/socket.c:2046 __sys_sendmmsg+0x1ee/0x620 net/socket.c:2136 SYSC_sendmmsg net/socket.c:2167 [inline] SyS_sendmmsg+0x35/0x60 net/socket.c:2162 do_syscall_64+0x280/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x4404c9 RSP: 002b:00007ffdce35f948 EFLAGS: 00000217 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004404c9 RDX: 0000000000000003 RSI: 0000000020001f00 RDI: 0000000000000003 RBP: 00000000006cb018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 0000000020000080 R11: 0000000000000217 R12: 0000000000401df0 R13: 0000000000401e80 R14: 0000000000000000 R15: 0000000000000000 Code: ff e8 1d 5e b9 fc e9 15 e9 ff ff e8 13 5e b9 fc e9 44 e8 ff ff e8 29 5e b9 fc e9 c0 e6 ff ff e8 3f f3 80 fc 0f 0b e8 38 f3 80 fc <0f> 0b 49 8d 87 80 00 00 00 4d 8d 87 84 00 00 00 48 89 85 20 fe RIP: __skb_pull include/linux/skbuff.h:2073 [inline] RSP: ffff8801bc18f0f0 RIP: __ip6_make_skb+0x1ac8/0x2190 net/ipv6/ip6_output.c:1636 RSP: ffff8801bc18f0f0 As stated by RFC 7112 section 5: When a host fragments an IPv6 datagram, it MUST include the entire IPv6 Header Chain in the First Fragment. So this patch addresses the issue dropping datagrams with excessive extheader length. It also updates the error path to report to the calling socket nonnegative pmtu values. The issue apparently predates git history. v1 -> v2: cleanup error path, as per Eric's suggestion Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+91e6f9932ff122fa4410@syzkaller.appspotmail.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
-
Miguel Fadon Perlines authored
[ Upstream commit 58b35f27 ] arp_filter performs an ip_route_output search for arp source address and checks if output device is the same where the arp request was received, if it is not, the arp request is not answered. This route lookup is always done on main route table so l3slave devices never find the proper route and arp is not answered. Passing l3mdev_master_ifindex_rcu(dev) return value as oif fixes the lookup for l3slave devices while maintaining same behavior for non l3slave devices as this function returns 0 in that case. Fixes: 613d09b3 ("net: Use VRF device index for lookups on TX") Signed-off-by:
Miguel Fadon Perlines <mfadon@teldat.com> Acked-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Alexandre Belloni authored
commit 4a5f06a0 upstream. Fix missing } Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Theodore Ts'o authored
commit 92e75428 upstream. Linus pointed out that there is a much more efficient way of avoiding the problem that we were trying to address in commit 9dfa7bba: "fix race in drivers/char/random.c:get_reg()". Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by:
-
Nathan Chancellor authored
Kernels that do not have f6b10209 ("virtio-net: switch to use build_skb() for small buffer") will have an extra call to skb_to_sgvec that is not handled by e2fcad58 ("virtio_net: check return value of skb_to_sgvec always"). Since the former does not appear to be stable material, just fix the call up directly. Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Jason A. Donenfeld authored
commit e2fcad58 upstream. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Jason A. Donenfeld authored
commit 89a5ea99 upstream. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Jason A. Donenfeld authored
commit 3f297707 upstream. Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit fa1195cc ] We need to increase output offset in each iteration, not decrease it as we currently do. I guess we were lucky to finish in most cases in first iteration, so the bug never showed. However it shows a lot when working with big (~4GB) size data. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 9c9f5a2f ("perf tools: Introduce copyfile_offset() function") Link: http://lkml.kernel.org/r/20180109133923.25406-1-jolsa@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Miquel Raynal authored
[ Upstream commit 12663b44 ] Reads from NAND devices usually trigger bitflips, this is an expected behavior. While bitflips are under a given threshold, the MTD core returns 0. However, when the number of corrected bitflips is above this same threshold, -EUCLEAN is returned to inform the upper layer that this block is slightly dying and soon the ECC engine will be overtaken so actions should be taken to move the data out of it. This particular condition should not be treated like an error and the test should continue. Signed-off-by:
Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit faec44b6 ] We should not try to do any i2c transfers before the controller is resumed (which happens before our resume method gets called). So we need to disable our IRQ while suspended to enforce this. The code paths for devices with GPIOs for the int and reset pins already disable the IRQ the through goodix_free_irq(). This commit also disables the IRQ while suspended for devices without GPIOs for the int and reset pins. This fixes the i2c bus sometimes getting stuck after a suspend/resume causing the touchscreen to sometimes not work after a suspend/resume. This has been tested on a GPD pocked device. BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10 BugLink: https://www.reddit.com/r/GPDPocket/comments/7niut2/fix_for_broken_touch_after_resume_all_linux/Tested-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Bastien Nocera <hadess@hadess.net> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Andy Shevchenko authored
[ Upstream commit 2a609abe ] On Intel Edison the Broadcom Wi-Fi card, which is connected to SDIO, requires 2.0v, while the host, according to Intel Merrifield TRM, supports 1.8v supply only. The card announces itself as mmc2: new ultra high speed DDR50 SDIO card at address 0001 Introduce a custom OCR mask for SDIO host controller on Intel Merrifield and add a special case to sdhci_set_power_noreg() to override 2.0v supply by enforcing 1.8v power choice. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Arjun Vynipadath authored
[ Upstream commit ea0a4210 ] We'd come in with SGE_FL_BUFFER_SIZE[0] and [1] both equal to 64KB and the extant logic would flag that as an error. This was already fixed in cxgb4 driver with "92ddcc7b cxgb4: Fix some small bugs in t4_sge_init_soft() when our Page Size is 64KB". Original Work by: Casey Leedom <leedom@chelsio.com> Signed-off-by:
Arjun Vynipadath <arjun@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 68fa24f9 ] We should not call edac_mc_del_mc() if a corresponding call to edac_mc_add_mc() has not been performed yet. So here, we should go to err instead of err2 to branch at the right place of the error handling path. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180107205400.14068-1-christophe.jaillet@wanadoo.frSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit ea3d8465 ] Some devices have the control dlci stay in ADM mode instead of the UA mode. This can seen at least on droid 4 when trying to open the ts 27.010 mux port. Enabling n_gsm debug mode shows the control dlci always respond with DM to SABM instead of UA: # modprobe n_gsm debug=0xff # ldattach -d GSM0710 /dev/ttyS0 & gsmld_output: 00000000: f9 03 3f 01 1c f9 --> 0) C: SABM(P) gsmld_receive: 00000000: f9 03 1f 01 36 f9 <-- 0) C: DM(P) ... $ minicom -D /dev/gsmtty1 minicom: cannot open /dev/gsmtty1: No error information $ strace minicom -D /dev/gsmtty1 ... open("/dev/gsmtty1", O_RDWR|O_NOCTTY|O_NONBLOCK|O_LARGEFILE) = -1 EL2HLT Note that this is different issue from other n_gsm -EL2HLT issues such as timeouts when the control dlci does not respond at all. The ADM mode seems to be a quite common according to "RF Wireless World" article "GSM Issue-UE sends SABM and gets a DM response instead of UA response": This issue is most commonly observed in GSM networks where in UE sends SABM and expects network to send UA response but it ends up receiving DM response from the network. SABM stands for Set asynchronous balanced mode, UA stands for Unnumbered Acknowledge and DA stands for Disconnected Mode. An RLP entity can be in one of two modes: - Asynchronous Balanced Mode (ABM) - Asynchronous Disconnected Mode (ADM) Currently Linux kernel closes the control dlci after several retries in gsm_dlci_t1() on DM. This causes n_gsm /dev/gsmtty ports to produce error code -EL2HLT when trying to open them as the closing of control dlci has already set gsm->dead. Let's fix the issue by allowing control dlci stay in ADM mode after the retries so the /dev/gsmtty ports can be opened and used. It seems that it might take several attempts to get any response from the control dlci, so it's best to allow ADM mode only after the SABM retries are done. Note that for droid 4 additional patches are needed to mux the ttyS0 pins and to toggle RTS gpio_149 to wake up the mdm6600 modem are also needed to use n_gsm. And the mdm6600 modem needs to be powered on. Cc: linux-serial@vger.kernel.org Cc: Alan Cox <alan@llwyncelyn.cymru> Cc: Jiri Prchal <jiri.prchal@aksignal.cz> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Russ Gorby <russ.gorby@intel.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Ming Lei authored
[ Upstream commit 8ab0b7dc ] HW queues may be unmapped in some cases, such as blk_mq_update_nr_hw_queues(), then we need to check it before calling blk_mq_tag_idle(), otherwise the following kernel oops can be triggered, so fix it by checking if the hw queue is unmapped since it doesn't make sense to idle the tags any more after hw queues are unmapped. [ 440.771298] Workqueue: nvme-wq nvme_rdma_del_ctrl_work [nvme_rdma] [ 440.779104] task: ffff894bae755ee0 ti: ffff893bf9bc8000 task.ti: ffff893bf9bc8000 [ 440.788359] RIP: 0010:[<ffffffffb730e2b4>] [<ffffffffb730e2b4>] __blk_mq_tag_idle+0x24/0x40 [ 440.798697] RSP: 0018:ffff893bf9bcbd10 EFLAGS: 00010286 [ 440.805538] RAX: 0000000000000000 RBX: ffff895bb131dc00 RCX: 000000000000011f [ 440.814426] RDX: 00000000ffffffff RSI: 0000000000000120 RDI: ffff895bb131dc00 [ 440.823301] RBP: ffff893bf9bcbd10 R08: 000000000001b860 R09: 4a51d361c00c0000 [ 440.832193] R10: b5907f32b4cc7003 R11: ffffd6cabfb57000 R12: ffff894bafd1e008 [ 440.841091] R13: 0000000000000001 R14: ffff895baf770000 R15: 0000000000000080 [ 440.849988] FS: 0000000000000000(0000) GS:ffff894bbdcc0000(0000) knlGS:0000000000000000 [ 440.859955] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 440.867274] CR2: 0000000000000008 CR3: 000000103d098000 CR4: 00000000001407e0 [ 440.876169] Call Trace: [ 440.879818] [<ffffffffb7309d68>] blk_mq_exit_hctx+0xd8/0xe0 [ 440.887051] [<ffffffffb730dc40>] blk_mq_free_queue+0xf0/0x160 [ 440.894465] [<ffffffffb72ff679>] blk_cleanup_queue+0xd9/0x150 [ 440.901881] [<ffffffffc08a802b>] nvme_ns_remove+0x5b/0xb0 [nvme_core] [ 440.910068] [<ffffffffc08a811b>] nvme_remove_namespaces+0x3b/0x60 [nvme_core] [ 440.919026] [<ffffffffc08b817b>] __nvme_rdma_remove_ctrl+0x2b/0xb0 [nvme_rdma] [ 440.928079] [<ffffffffc08b8237>] nvme_rdma_del_ctrl_work+0x17/0x20 [nvme_rdma] [ 440.937126] [<ffffffffb70ab58a>] process_one_work+0x17a/0x440 [ 440.944517] [<ffffffffb70ac3a8>] worker_thread+0x278/0x3c0 [ 440.951607] [<ffffffffb70ac130>] ? manage_workers.isra.24+0x2a0/0x2a0 [ 440.959760] [<ffffffffb70b352f>] kthread+0xcf/0xe0 [ 440.966055] [<ffffffffb70b3460>] ? insert_kthread_work+0x40/0x40 [ 440.973715] [<ffffffffb76d8658>] ret_from_fork+0x58/0x90 [ 440.980586] [<ffffffffb70b3460>] ? insert_kthread_work+0x40/0x40 [ 440.988229] Code: 5b 41 5c 5d c3 66 90 0f 1f 44 00 00 48 8b 87 20 01 00 00 f0 0f ba 77 40 01 19 d2 85 d2 75 08 c3 0f 1f 80 00 00 00 00 55 48 89 e5 <f0> ff 48 08 48 8d 78 10 e8 7f 0f 05 00 5d c3 0f 1f 00 66 2e 0f [ 441.011620] RIP [<ffffffffb730e2b4>] __blk_mq_tag_idle+0x24/0x40 [ 441.019301] RSP <ffff893bf9bcbd10> [ 441.024052] CR2: 0000000000000008 Reported-by:
Zhang Yi <yizhan@redhat.com> Tested-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
chenxiang authored
[ Upstream commit affc6778 ] The status of SAS PHY is in sas_phy->enabled. There is an issue that the status of a remote SAS PHY may be initialized incorrectly: if disable remote SAS PHY through sysfs interface (such as echo 0 > /sys/class/sas_phy/phy-1:0:0/enable), then reboot the system, and we will find the status of remote SAS PHY which is disabled before is 1 (cat /sys/class/sas_phy/phy-1:0:0/enable). But actually the status of remote SAS PHY is disabled and the device attached is not found. In SAS protocol, NEGOTIATED LOGICAL LINK RATE field of DISCOVER response is 0x1 when remote SAS PHY is disabled. So initialize sas_phy->enabled according to the value of NEGOTIATED LOGICAL LINK RATE field. Signed-off-by:
chenxiang <chenxiang66@hisilicon.com> Reviewed-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Jason Yan authored
[ Upstream commit 2b23d950 ] The intend purpose here was to goto out if smp_execute_task() returned error. Obviously something got screwed up. We will never get these link error statistics below: ~:/sys/class/sas_phy/phy-1:0:12 # cat invalid_dword_count 0 ~:/sys/class/sas_phy/phy-1:0:12 # cat running_disparity_error_count 0 ~:/sys/class/sas_phy/phy-1:0:12 # cat loss_of_dword_sync_count 0 ~:/sys/class/sas_phy/phy-1:0:12 # cat phy_reset_problem_count 0 Obviously we should goto error handler if smp_execute_task() returns non-zero. Fixes: 2908d778 ("[SCSI] aic94xx: new driver") Signed-off-by:
-
Jason Yan authored
[ Upstream commit 4a491b1a ] We've got a memory leak with the following producer: while true; do cat /sys/class/sas_phy/phy-1:0:12/invalid_dword_count >/dev/null; done The buffer req is allocated and not freed after we return. Fix it. Fixes: 2908d778 ("[SCSI] aic94xx: new driver") Signed-off-by:
-
Tang Junhui authored
[ Upstream commit 4eca1cb2 ] In such scenario that there are some flash only volumes , and some cached devices, when many tasks request these devices in writeback mode, the write IOs may fall to the same bucket as bellow: | cached data | flash data | cached data | cached data| flash data| then after writeback of these cached devices, the bucket would be like bellow bucket: | free | flash data | free | free | flash data | So, there are many free space in this bucket, but since data of flash only volumes still exists, so this bucket cannot be reclaimable, which would cause waste of bucket space. In this patch, we segregate flash only volume write streams from cached devices, so data from flash only volumes and cached devices can store in different buckets. Compare to v1 patch, this patch do not add a additionally open bucket list, and it is try best to segregate flash only volume write streams from cached devices, sectors of flash only volumes may still be mixed with dirty sectors of cached device, but the number is very small. [mlyle: fixed commit log formatting, permissions, line endings] Signed-off-by:
Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by:
Michael Lyle <mlyle@lyle.org> Signed-off-by:
-
Tang Junhui authored
[ Upstream commit 8d29c442 ] Currently, when a cached device detaching from cache, writeback thread is not stopped, and writeback_rate_update work is not canceled. For example, after the following command: echo 1 >/sys/block/sdb/bcache/detach you can still see the writeback thread. Then you attach the device to the cache again, bcache will create another writeback thread, for example, after below command: echo ba0fb5cd-658a-4533-9806-6ce166d883b9 > /sys/block/sdb/bcache/attach then you will see 2 writeback threads. This patch stops writeback thread and cancels writeback_rate_update work when cached device detaching from cache. Compare with patch v1, this v2 patch moves code down into the register lock for safety in case of any future changes as Coly and Mike suggested. [edit by mlyle: commit log spelling/formatting] Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit d0b1d259 ] If one 'drm_gem_handle_create()' fails, we leak somes handles and some memory. In order to fix it: - move the 'free(bo_state)' at the end of the function so that it is also called in the eror handling path. This has the side effect to also try to free it if the first 'kcalloc' fails. This is harmless. - add a new label, err_delete_handle, in order to delete already allocated handles in error handling path - remove the now useless 'err' label The way the code is now written will also delete the handles if the 'copy_to_user()' call fails. Signed-off-by:
Eric Anholt <eric@anholt.net> Link: http://patchwork.freedesktop.org/patch/msgid/20170512123803.1886-1-christophe.jaillet@wanadoo.frSigned-off-by:
-
Mickaël Salaün authored
[ Upstream commit 34a048cc ] Do not confuse the compiler with a semicolon preceding a block. Replace the semicolon with an empty block to avoid a warning: gcc -Wl,-no-as-needed -Wall -lpthread seccomp_bpf.c -o /.../linux/tools/testing/selftests/seccomp/seccomp_bpf In file included from seccomp_bpf.c:40:0: seccomp_bpf.c: In function ‘change_syscall’: ../kselftest_harness.h:558:2: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation] for (; _metadata->trigger; _metadata->trigger = __bail(_assert)) ^ ../kselftest_harness.h:574:14: note: in expansion of macro ‘OPTIONAL_HANDLER’ } while (0); OPTIONAL_HANDLER(_assert) ^~~~~~~~~~~~~~~~ ../kselftest_harness.h:440:2: note: in expansion of macro ‘__EXPECT’ __EXPECT(expected, seen, ==, 0) ^~~~~~~~ seccomp_bpf.c:1313:2: note: in expansion of macro ‘EXPECT_EQ’ EXPECT_EQ(0, ret); ^~~~~~~~~ seccomp_bpf.c:1317:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘for’ { ^ Signed-off-by:
Mickaël Salaün <mic@digikod.net> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Kees Cook <keescook@chromium.org> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Will Drewry <wad@chromium.org> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Karicheri, Muralidharan authored
[ Upstream commit 675c8da0 ] When HSR interface is setup using ip link command, an annoying warning appears with the trace as below:- [ 203.019828] hsr_get_node: Non-HSR frame [ 203.019833] Modules linked in: [ 203.019848] CPU: 0 PID: 158 Comm: sd-resolve Tainted: G W 4.12.0-rc3-00052-g9fa6bf70 #2 [ 203.019853] Hardware name: Generic DRA74X (Flattened Device Tree) [ 203.019869] [<c0110280>] (unwind_backtrace) from [<c010c2f4>] (show_stack+0x10/0x14) [ 203.019880] [<c010c2f4>] (show_stack) from [<c04b9f64>] (dump_stack+0xac/0xe0) [ 203.019894] [<c04b9f64>] (dump_stack) from [<c01374e8>] (__warn+0xd8/0x104) [ 203.019907] [<c01374e8>] (__warn) from [<c0137548>] (warn_slowpath_fmt+0x34/0x44) root@am57xx-evm:~# [ 203.019921] [<c0137548>] (warn_slowpath_fmt) from [<c081126c>] (hsr_get_node+0x148/0x170) [ 203.019932] [<c081126c>] (hsr_get_node) from [<c0814240>] (hsr_forward_skb+0x110/0x7c0) [ 203.019942] [<c0814240>] (hsr_forward_skb) from [<c0811d64>] (hsr_dev_xmit+0x2c/0x34) [ 203.019954] [<c0811d64>] (hsr_dev_xmit) from [<c06c0828>] (dev_hard_start_xmit+0xc4/0x3bc) [ 203.019963] [<c06c0828>] (dev_hard_start_xmit) from [<c06c13d8>] (__dev_queue_xmit+0x7c4/0x98c) [ 203.019974] [<c06c13d8>] (__dev_queue_xmit) from [<c0782f54>] (ip6_finish_output2+0x330/0xc1c) [ 203.019983] [<c0782f54>] (ip6_finish_output2) from [<c0788f0c>] (ip6_output+0x58/0x454) [ 203.019994] [<c0788f0c>] (ip6_output) from [<c07b16cc>] (mld_sendpack+0x420/0x744) As this is an expected path to hsr_get_node() with frame coming from the master interface, add a check to ensure packet is not from the master port and then warn. Signed-off-by:
Murali Karicheri <m-karicheri2@ti.com> Signed-off-by:
-
Roopa Prabhu authored
[ Upstream commit e0090a9e ] This patch fixes vxlan_snoop to not move permanent fdb entries on learn events. This is consistent with the bridge fdb handling of permanent entries. Fixes: 26a41ae6 ("vxlan: only migrate dynamic FDB entries") Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Stefan Haberland authored
[ Upstream commit e8ac0155 ] The safe offline processing may hang forever because it waits for I/O which can not be started because of the offline flag that prevents new I/O from being started. Allow I/O to be started during safe offline processing because in this special case we take care that the queues are empty before throwing away the device. Signed-off-by:
Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Bob Moore authored
[ Upstream commit 6f0527b7 ] ACPICA commit ed0389cb11a61e63c568ac1f67948fc6a7bd1aeb An invalid opcode indicates something seriously wrong with the input AML file. The AML parser is immediately confused and lost, causing the resulting parse tree to be ill-formed. The actual disassembly can then cause numerous unrelated errors and faults. This change aborts the disassembly upon discovery of such an opcode during the AML parse phase. Link: https://github.com/acpica/acpica/commit/ed0389cbSigned-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Lv Zheng authored
[ Upstream commit 861ba635 ] ACPICA commit 99bc3beca92c6574ea1d69de42e54f872e6373ce It is reported that on Linux, RTC driver complains wrong errors on hardware reduced platform: [ 4.085420] ACPI Warning: Could not enable fixed event - real_time_clock (4) (20160422/evxface-654) This patch fixes this by correctly adding runtime reduced hardware check. Reported by Chandan Tagore, fixed by Lv Zheng. Link: https://github.com/acpica/acpica/commit/99bc3becTested-by:
Chandan Tagore <tagore.chandan@gmail.com> Signed-off-by:
-
Lv Zheng authored
[ Upstream commit 84676b87 ] ACPICA commit e2df7455a9a4301b03668e4c9c02c7a564cc841c Some hosts may choose not to include stdarg.h, implementing a configurability in acgcc.h, allowing OSen like Solaris to exclude stdarg.h. This patch also fixes acintel.h accordingly without providing builtin support as Intel compiler is similar as GCC. Reported by Dana Myers, fixed by Lv Zheng. Link: https://github.com/acpica/acpica/commit/e2df7455Reported-by:
Dana Myers <dana.myers@oracle.com> Signed-off-by:
-
Christophe Jaillet authored
[ Upstream commit b2cdd8e1 ] 'of_node_put()' should be called on pointer returned by 'of_parse_phandle()' when done. In this function this is done in all path except this 'continue', so add it. Fixes: 97735da0 (drivers: cpuidle: Add status property to ARM idle states) Signed-off-by:
-
Marcel Holtmann authored
[ Upstream commit 313f6888 ] The Broadcom BCM20702 Bluetooth controller in ThinkPad-T530 devices report support for the Set Event Mask Page 2 command, but actually do return an error when trying to use it. < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Success (0x00) Commands: 162 entries ... Set Event Mask Page 2 (Octet 22 - Bit 2) ... < HCI Command: Set Event Mask Page 2 (0x03|0x0063) plen 8 Mask: 0x0000000000000000 > HCI Event: Command Complete (0x0e) plen 4 Set Event Mask Page 2 (0x03|0x0063) ncmd 1 Status: Unknown HCI Command (0x01) Since these controllers do not support any feature that would require the event mask page 2 to be modified, it is safe to not send this command at all. The default value is all bits set to zero. T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21e6 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=F82FA8E8CFC0 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Reported-by:
Sedat Dilek <sedat.dilek@gmail.com> Tested-by:
Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by:
-
Martin Blumenstingl authored
[ Upstream commit 855f06a1 ] The clock controller on Meson8, Meson8b and Meson8m2 is very similar based on the code from the Amlogic GPL kernel sources. Add separate compatibles for each SoC to make sure that we can easily implement all the small differences for each SoC later on. In general the Meson8 and Meson8m2 seem to be almost identical as they even share the same mach-meson8 directory in Amlogic's GPL kernel sources. The main clocks on Meson8, Meson8b and Meson8m2 are very similar, because they are all using the same PLL values, 90% of the clock gates are the same (the actual diffstat of the mach-meson8/clock.c and mach-meson8b/clock.c files is around 30 to 40 lines, when excluding all commented out code). The difference between the Meson8 and Meson8b clock gates seem to be: - Meson8 has AIU_PCLK, HDMI_RX, VCLK2_ENCT, VCLK2_ENCL, UART3, CSI_DIG_CLKIN gates which don't seem to be available on Meson8b - the gate on Meson8 for bit 7 seems to be named "_1200XXX" instead of "PERIPHS_TOP" (on Meson8b) - Meson8b has a SANA gate which doesn't seem to exist on Meson8 (or on Meson8 the same bit is used by the UART3 gate in Amlogic's GPL kernel sources) None of these gates is added for now, since it's unclear whether these definitions are actually correct (the VCLK2_ENCT gate for example is defined, but only used in some commented block). The main difference between all three SoCs seem to be the video (VPU) clocks. Apart from different supported clock rates (according to vpu.c in mach-meson8 and mach-meson8b from Amlogic's GPL kernel sources) the most notable difference is that Meson8m2 has a GP_PLL clock and a mux (probably the same as on the Meson GX SoCs) to support glitch-free (clock rate) switching. None of these VPU clocks are not supported by our mainline meson8b clock driver yet though. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by:
Rob Herring <robh@kernel.org> Acked-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
-
Netanel Belgazal authored
[ Upstream commit a2cc5198 ] Fixes: 1738cd3e ("Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
Netanel Belgazal <netanel@amazon.com> Signed-off-by:
-
Netanel Belgazal authored
[ Upstream commit 0857d92f ] This patch also change the mapping functions to devm_ functions Fixes: 1738cd3e ("Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
-
