- 26 Aug, 2023 14 commits
-
-
Russell King (Oracle) authored
Rather than detecting when half-duplex is not supported, and clearing the MAC capabilities, reverse the if() condition and use it to set the capabilities instead. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1qZAXn-005pUb-SP@rmk-PC.armlinux.org.ukSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Russell King (Oracle) authored
Move priv->phylink_config.mac_managed_pm to be along side the other phylink initialisations. Signed-off-by:
-
Russell King (Oracle) authored
Move the xgmac specific phylink capabilities to the dwxgmac2 support core. Signed-off-by:
-
Russell King (Oracle) authored
Move the setup of gmac4 speicifc phylink capabilities into gmac4 code. Signed-off-by:
-
Russell King (Oracle) authored
Allow MACs to provide their own capabilities via the MAC operations struct. Signed-off-by:
-
Russell King (Oracle) authored
Use phylink_limit_mac_speed() to limit the MAC capabilities rather than coding this for each speed. Signed-off-by:
-
Russell King (Oracle) authored
We have a local variable for priv->plat->mdio_bus_data, which we use later in the conditional if() block, but we evaluate the above within the conditional expression. Use mdio_bus_data instead. Since these will be the only two users of this local variable, move its assignment just before the if(). Signed-off-by:
-
Russell King (Oracle) authored
Move the initialisation of the fwnode variable closer to its use site, rather than scattered throughout stmmac_phy_setup(). Signed-off-by:
-
Russell King (Oracle) authored
All users of plat->phylink_node first convert it to a fwnode. Rather than repeatedly convert to a fwnode, store it as a fwnode. To reflect this change, call it plat->port_node instead - it is used for more than just phylink. Signed-off-by:
-
Russell King (Oracle) authored
Add a function which can be used to limit the phylink MAC capabilities to an upper speed limit. Signed-off-by:
-
Liang Chen authored
When an skb fails to be forwarded to the peer(e.g., skb data buffer length exceeds MTU), it will not be added to the peer's receive queue. Therefore, we should schedule the peer's NAPI poll function only when skb forwarding is successful to avoid unnecessary overhead. Signed-off-by:
Liang Chen <liangchen.linux@gmail.com> Link: https://lore.kernel.org/r/20230824123131.7673-1-liangchen.linux@gmail.comSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2023-08-25 We've added 87 non-merge commits during the last 8 day(s) which contain a total of 104 files changed, 3719 insertions(+), 4212 deletions(-). The main changes are: 1) Add multi uprobe BPF links for attaching multiple uprobes and usdt probes, which is significantly faster and saves extra fds, from Jiri Olsa. 2) Add support BPF cpu v4 instructions for arm64 JIT compiler, from Xu Kuohai. 3) Add support BPF cpu v4 instructions for riscv64 JIT compiler, from Pu Lehui. 4) Fix LWT BPF xmit hooks wrt their return values where propagating the result from skb_do_redirect() would trigger a use-after-free, from Yan Zhai. 5) Fix a BPF verifier issue related to bpf_kptr_xchg() with local kptr where the map's value kptr type and locally allocated obj type mismatch, from Yonghong Song. 6) Fix BPF verifier's check_func_arg_reg_off() function wrt graph root/node which bypassed reg->off == 0 enforcement, from Kumar Kartikeya Dwivedi. 7) Lift BPF verifier restriction in networking BPF programs to treat comparison of packet pointers not as a pointer leak, from Yafang Shao. 8) Remove unmaintained XDP BPF samples as they are maintained in xdp-tools repository out of tree, from Toke Høiland-Jørgensen. 9) Batch of fixes for the tracing programs from BPF samples in order to make them more libbpf-aware, from Daniel T. Lee. 10) Fix a libbpf signedness determination bug in the CO-RE relocation handling logic, from Andrii Nakryiko. 11) Extend libbpf to support CO-RE kfunc relocations. Also follow-up fixes for bpf_refcount shared ownership implementation, both from Dave Marchevsky. 12) Add a new bpf_object__unpin() API function to libbpf, from Daniel Xu. 13) Fix a memory leak in libbpf to also free btf_vmlinux when the bpf_object gets closed, from Hao Luo. 14) Small error output improvements to test_bpf module, from Helge Deller. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (87 commits) selftests/bpf: Add tests for rbtree API interaction in sleepable progs bpf: Allow bpf_spin_{lock,unlock} in sleepable progs bpf: Consider non-owning refs to refcounted nodes RCU protected bpf: Reenable bpf_refcount_acquire bpf: Use bpf_mem_free_rcu when bpf_obj_dropping refcounted nodes bpf: Consider non-owning refs trusted bpf: Ensure kptr_struct_meta is non-NULL for collection insert and refcount_acquire selftests/bpf: Enable cpu v4 tests for RV64 riscv, bpf: Support unconditional bswap insn riscv, bpf: Support signed div/mod insns riscv, bpf: Support 32-bit offset jmp insn riscv, bpf: Support sign-extension mov insns riscv, bpf: Support sign-extension load insns riscv, bpf: Fix missing exception handling and redundant zext for LDX_B/H/W samples/bpf: Add note to README about the XDP utilities moved to xdp-tools samples/bpf: Cleanup .gitignore samples/bpf: Remove the xdp_sample_pkts utility samples/bpf: Remove the xdp1 and xdp2 utilities samples/bpf: Remove the xdp_rxq_info utility samples/bpf: Remove the xdp_redirect* utilities ... ==================== Link: https://lore.kernel.org/r/20230825194319.12727-1-daniel@iogearbox.netSigned-off-by: -
Jakub Kicinski authored
Merge tag 'wireless-next-2023-08-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.6 The second pull request for v6.6, this time with both stack and driver changes. Unusually we have only one major new feature but lots of small cleanup all over, I guess this is due to people have been on vacation the last month. Major changes: rtw89 - Introduce Time Averaged SAR (TAS) support * tag 'wireless-next-2023-08-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (114 commits) wifi: rtlwifi: rtl8723: Remove unused function rtl8723_cmd_send_packet() wifi: rtw88: usb: kill and free rx urbs on probe failure wifi: rtw89: Fix clang -Wimplicit-fallthrough in rtw89_query_sar() wifi: rtw89: phy: modify register setting of ENV_MNTR, PHYSTS and DIG wifi: rtw89: phy: add phy_gen_def::cr_base to support WiFi 7 chips wifi: rtw89: mac: define register address of rx_filter to generalize code wifi: rtw89: mac: define internal memory address for WiFi 7 chip wifi: rtw89: mac: generalize code to indirectly access WiFi internal memory wifi: rtw89: mac: add mac_gen_def::band1_offset to map MAC band1 register address wifi: wlcore: sdio: Use module_sdio_driver macro to simplify the code wifi: rtw89: initialize multi-channel handling wifi: rtw89: provide functions to configure NoA for beacon update wifi: rtw89: call rtw89_chan_get() by vif chanctx if aware of vif wifi: rtw89: sar: let caller decide the center frequency to query wifi: rtw89: refine rtw89_correct_cck_chan() by rtw89_hw_to_nl80211_band() wifi: rtw89: add function prototype for coex request duration Fix nomenclature for USB and PCI wireless devices wifi: ath: Use is_multicast_ether_addr() to check multicast Ether address wifi: ath12k: Remove unused declarations wifi: ath12k: add check max message length while scanning with extraie ... ==================== Link: https://lore.kernel.org/r/20230825132230.A0833C433C8@smtp.kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'for-net-next-2023-08-24' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - Introduce HCI_QUIRK_BROKEN_LE_CODED - Add support for PA/BIG sync - Add support for NXP IW624 chipset - Add support for Qualcomm WCN7850 * tag 'for-net-next-2023-08-24' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: Bluetooth: btusb: Do not call kfree_skb() under spin_lock_irqsave() Bluetooth: btusb: Fix quirks table naming Bluetooth: HCI: Introduce HCI_QUIRK_BROKEN_LE_CODED Bluetooth: btintel: Send new command for PPAG Bluetooth: ISO: Add support for periodic adv reports processing Bluetooth: hci_conn: fail SCO/ISO via hci_conn_failed if ACL gone early Bluetooth: hci_core: Fix missing instances using HCI_MAX_AD_LENGTH Bluetooth: ISO: Use defer setup to separate PA sync and BIG sync Bluetooth: qca: add support for WCN7850 Bluetooth: qca: use switch case for soc type behavior dt-bindings: net: bluetooth: qualcomm: document WCN7850 chipset Bluetooth: hci_conn: Fix sending BT_HCI_CMD_LE_CREATE_CONN_CANCEL Bluetooth: hci_sync: Fix UAF in hci_disconnect_all_sync Bluetooth: btnxpuart: Improve inband Independent Reset handling Bluetooth: btnxpuart: Add support for IW624 chipset Bluetooth: btnxpuart: Remove check for CTS low after FW download ==================== Link: https://lore.kernel.org/r/20230824201458.2577-1-luiz.dentz@gmail.comSigned-off-by:
-
- 25 Aug, 2023 26 commits
-
-
Alexei Starovoitov authored
Dave Marchevsky says: ==================== BPF Refcount followups 3: bpf_mem_free_rcu refcounted nodes This series is the third of three (or more) followups to address issues in the bpf_refcount shared ownership implementation discovered by Kumar. This series addresses the use-after-free scenario described in [0]. The first followup series ([1]) also attempted to address the same use-after-free, but only got rid of the splat without addressing the underlying issue. After this series the underyling issue is fixed and bpf_refcount_acquire can be re-enabled. The main fix here is migration of bpf_obj_drop to use bpf_mem_free_rcu. To understand why this fixes the issue, let us consider the example interleaving provided by Kumar in [0]: CPU 0 CPU 1 n = bpf_obj_new lock(lock1) bpf_rbtree_add(rbtree1, n) m = bpf_rbtree_acquire(n) unlock(lock1) kptr_xchg(map, m) // move to map // at this point, refcount = 2 m = kptr_xchg(map, NULL) lock(lock2) lock(lock1) bpf_rbtree_add(rbtree2, m) p = bpf_rbtree_first(rbtree1) if (!RB_EMPTY_NODE) bpf_obj_drop_impl(m) // A bpf_rbtree_remove(rbtree1, p) unlock(lock1) bpf_obj_drop(p) // B bpf_refcount_acquire(m) // use-after-free ... Before this series, bpf_obj_drop returns memory to the allocator using bpf_mem_free. At this point (B in the example) there might be some non-owning references to that memory which the verifier believes are valid, but where the underlying memory was reused for some other allocation. Commit 7793fc3b ("bpf: Make bpf_refcount_acquire fallible for non-owning refs") attempted to fix this by doing refcount_inc_non_zero on refcount_acquire in instead of refcount_inc under the assumption that preventing erroneous incr-on-0 would be sufficient. This isn't true, though: refcount_inc_non_zero must *check* if the refcount is zero, and the memory it's checking could have been reused, so the check may look at and incr random reused bytes. If we wait to reuse this memory until all non-owning refs that could point to it are gone, there is no possibility of this scenario happening. Migrating bpf_obj_drop to use bpf_mem_free_rcu for refcounted nodes accomplishes this. For such nodes, the validity of their underlying memory is now tied to RCU critical section. This matches MEM_RCU trustedness expectations, so the series takes the opportunity to more explicitly mark this trustedness state. The functional effects of trustedness changes here are rather small. This is largely due to local kptrs having separate verifier handling - with implicit trustedness assumptions - than arbitrary kptrs. Regardless, let's take the opportunity to move towards a world where trustedness is more explicitly handled. Changelog: v1 -> v2: https://lore.kernel.org/bpf/20230801203630.3581291-1-davemarchevsky@fb.com/ Patch 1 ("bpf: Ensure kptr_struct_meta is non-NULL for collection insert and refcount_acquire") * Spent some time experimenting with a better approach as per convo w/ Yonghong on v1's patch. It started getting too complex, so left unchanged for now. Yonghong was fine with this approach being shipped. Patch 2 ("bpf: Consider non-owning refs trusted") * Add Yonghong ack Patch 3 ("bpf: Use bpf_mem_free_rcu when bpf_obj_dropping refcounted nodes") * Add Yonghong ack Patch 4 ("bpf: Reenable bpf_refcount_acquire") * Add Yonghong ack Patch 5 ("bpf: Consider non-owning refs to refcounted nodes RCU protected") * Undo a nonfunctional whitespace change that shouldn't have been included (Yonghong) * Better logging message when complaining about rcu_read_{lock,unlock} in rbtree cb (Alexei) * Don't invalidate_non_owning_refs when processing bpf_rcu_read_unlock (Yonghong, Alexei) Patch 6 ("[RFC] bpf: Allow bpf_spin_{lock,unlock} in sleepable prog's RCU CS") * preempt_{disable,enable} in __bpf_spin_{lock,unlock} (Alexei) * Due to this we can consider spin_lock CS an RCU-sched read-side CS (per RCU/Design/Requirements/Requirements.rst). Modify in_rcu_cs accordingly. * no need to check for !in_rcu_cs before allowing bpf_spin_{lock,unlock} (Alexei) * RFC tag removed and renamed to "bpf: Allow bpf_spin_{lock,unlock} in sleepable progs" Patch 7 ("selftests/bpf: Add tests for rbtree API interaction in sleepable progs") * Remove "no explicit bpf_rcu_read_lock" failure test, add similar success test (Alexei) Summary of patch contents, with sub-bullets being leading questions and comments I think are worth reviewer attention: * Patches 1 and 2 are moreso documententation - and enforcement, in patch 1's case - of existing semantics / expectations * Patch 3 changes bpf_obj_drop behavior for refcounted nodes such that their underlying memory is not reused until RCU grace period elapses * Perhaps it makes sense to move to mem_free_rcu for _all_ non-owning refs in the future, not just refcounted. This might allow custom non-owning ref lifetime + invalidation logic to be entirely subsumed by MEM_RCU handling. IMO this needs a bit more thought and should be tackled outside of a fix series, so it's not attempted here. * Patch 4 re-enables bpf_refcount_acquire as changes in patch 3 fix the remaining use-after-free * One might expect this patch to be last in the series, or last before selftest changes. Patches 5 and 6 don't change verification or runtime behavior for existing BPF progs, though. * Patch 5 brings the verifier's understanding of refcounted node trustedness in line with Patch 4's changes * Patch 6 allows some bpf_spin_{lock, unlock} calls in sleepable progs. Marked RFC for a few reasons: * bpf_spin_{lock,unlock} haven't been usable in sleepable progs since before the introduction of bpf linked list and rbtree. As such this feels more like a new feature that may not belong in this fixes series. * Patch 7 adds tests [0]: https://lore.kernel.org/bpf/atfviesiidev4hu53hzravmtlau3wdodm2vqs7rd7tnwft34e3@xktodqeqevir/ [1]: https://lore.kernel.org/bpf/20230602022647.1571784-1-davemarchevsky@fb.com/ ==================== Link: https://lore.kernel.org/r/20230821193311.3290257-1-davemarchevsky@fb.comSigned-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Dave Marchevsky authored
Confirm that the following sleepable prog states fail verification: * bpf_rcu_read_unlock before bpf_spin_unlock * RCU CS will last at least as long as spin_lock CS Also confirm that correct usage passes verification, specifically: * Explicit use of bpf_rcu_read_{lock, unlock} in sleepable test prog * Implied RCU CS due to spin_lock CS None of the selftest progs actually attach to bpf_testmod's bpf_testmod_test_read. Signed-off-by:Dave Marchevsky <davemarchevsky@fb.com> Link: https://lore.kernel.org/r/20230821193311.3290257-8-davemarchevsky@fb.comSigned-off-by:
-
Dave Marchevsky authored
Commit 9e7a4d98 ("bpf: Allow LSM programs to use bpf spin locks") disabled bpf_spin_lock usage in sleepable progs, stating: Sleepable LSM programs can be preempted which means that allowng spin locks will need more work (disabling preemption and the verifier ensuring that no sleepable helpers are called when a spin lock is held). This patch disables preemption before grabbing bpf_spin_lock. The second requirement above "no sleepable helpers are called when a spin lock is held" is implicitly enforced by current verifier logic due to helper calls in spin_lock CS being disabled except for a few exceptions, none of which sleep. Due to above preemption changes, bpf_spin_lock CS can also be considered a RCU CS, so verifier's in_rcu_cs check is modified to account for this. Signed-off-by:
-
Dave Marchevsky authored
An earlier patch in the series ensures that the underlying memory of nodes with bpf_refcount - which can have multiple owners - is not reused until RCU grace period has elapsed. This prevents use-after-free with non-owning references that may point to recently-freed memory. While RCU read lock is held, it's safe to dereference such a non-owning ref, as by definition RCU GP couldn't have elapsed and therefore underlying memory couldn't have been reused. From the perspective of verifier "trustedness" non-owning refs to refcounted nodes are now trusted only in RCU CS and therefore should no longer pass is_trusted_reg, but rather is_rcu_reg. Let's mark them MEM_RCU in order to reflect this new state. Signed-off-by:
-
Dave Marchevsky authored
Now that all reported issues are fixed, bpf_refcount_acquire can be turned back on. Also reenable all bpf_refcount-related tests which were disabled. This a revert of: * commit f3514a5d ("selftests/bpf: Disable newly-added 'owner' field test until refcount re-enabled") * commit 7deca5ea ("bpf: Disable bpf_refcount_acquire kfunc calls until race conditions are fixed") Signed-off-by:
Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20230821193311.3290257-5-davemarchevsky@fb.comSigned-off-by:
-
Dave Marchevsky authored
This is the final fix for the use-after-free scenario described in commit 7793fc3b ("bpf: Make bpf_refcount_acquire fallible for non-owning refs"). That commit, by virtue of changing bpf_refcount_acquire's refcount_inc to a refcount_inc_not_zero, fixed the "refcount incr on 0" splat. The not_zero check in refcount_inc_not_zero, though, still occurs on memory that could have been free'd and reused, so the commit didn't properly fix the root cause. This patch actually fixes the issue by free'ing using the recently-added bpf_mem_free_rcu, which ensures that the memory is not reused until RCU grace period has elapsed. If that has happened then there are no non-owning references alive that point to the recently-free'd memory, so it can be safely reused. Signed-off-by:
-
Dave Marchevsky authored
Recent discussions around default kptr "trustedness" led to changes such as commit 6fcd486b ("bpf: Refactor RCU enforcement in the verifier."). One of the conclusions of those discussions, as expressed in code and comments in that patch, is that we'd like to move away from 'raw' PTR_TO_BTF_ID without some type flag or other register state indicating trustedness. Although PTR_TRUSTED and PTR_UNTRUSTED flags mark this state explicitly, the verifier currently considers trustedness implied by other register state. For example, owning refs to graph collection nodes must have a nonzero ref_obj_id, so they pass the is_trusted_reg check despite having no explicit PTR_{UN}TRUSTED flag. This patch makes trustedness of non-owning refs to graph collection nodes explicit as well. By definition, non-owning refs are currently trusted. Although the ref has no control over pointee lifetime, due to non-owning ref clobbering rules (see invalidate_non_owning_refs) dereferencing a non-owning ref is safe in the critical section controlled by bpf_spin_lock associated with its owning collection. Note that the previous statement does not hold true for nodes with shared ownership due to the use-after-free issue that this series is addressing. True shared ownership was disabled by commit 7deca5ea ("bpf: Disable bpf_refcount_acquire kfunc calls until race conditions are fixed"), though, so the statement holds for now. Further patches in the series will change the trustedness state of non-owning refs before re-enabling bpf_refcount_acquire. Let's add NON_OWN_REF type flag to BPF_REG_TRUSTED_MODIFIERS such that a non-owning ref reg state would pass is_trusted_reg check. Somewhat surprisingly, this doesn't result in any change to user-visible functionality elsewhere in the verifier: graph collection nodes are all marked MEM_ALLOC, which tends to be handled in separate codepaths from "raw" PTR_TO_BTF_ID. Regardless, let's be explicit here and document the current state of things before changing it elsewhere in the series. Signed-off-by:
-
Dave Marchevsky authored
It's straightforward to prove that kptr_struct_meta must be non-NULL for any valid call to these kfuncs: * btf_parse_struct_metas in btf.c creates a btf_struct_meta for any struct in user BTF with a special field (e.g. bpf_refcount, {rb,list}_node). These are stored in that BTF's struct_meta_tab. * __process_kf_arg_ptr_to_graph_node in verifier.c ensures that nodes have {rb,list}_node field and that it's at the correct offset. Similarly, check_kfunc_args ensures bpf_refcount field existence for node param to bpf_refcount_acquire. * So a btf_struct_meta must have been created for the struct type of node param to these kfuncs * That BTF and its struct_meta_tab are guaranteed to still be around. Any arbitrary {rb,list} node the BPF program interacts with either: came from bpf_obj_new or a collection removal kfunc in the same program, in which case the BTF is associated with the program and still around; or came from bpf_kptr_xchg, in which case the BTF was associated with the map and is still around Instead of silently continuing with NULL struct_meta, which caused confusing bugs such as those addressed by commit 2140a6e3 ("bpf: Set kptr_struct_meta for node param to list and rbtree insert funcs"), let's error out. Then, at runtime, we can confidently say that the implementations of these kfuncs were given a non-NULL kptr_struct_meta, meaning that special-field-specific functionality like bpf_obj_free_fields and the bpf_obj_drop change introduced later in this series are guaranteed to execute. This patch doesn't change functionality, just makes it easier to reason about existing functionality. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for v6.6. No major changes, only smaller fixes and cleanups this time.
-
Jinjie Ruan authored
The function rtl8723_cmd_send_packet() is not used anywhere, so remove it. Signed-off-by:
Jinjie Ruan <ruanjinjie@huawei.com> Acked-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230824062339.1885385-1-ruanjinjie@huawei.com
-
Sascha Hauer authored
After rtw_usb_alloc_rx_bufs() has been called rx urbs have been allocated and must be freed in the error path. After rtw_usb_init_rx() has been called they are submitted, so they also must be killed. Add these forgotten steps to the probe error path. Besides the lost memory this also fixes a problem when the driver fails to download the firmware in rtw_chip_info_setup(). In this case it can happen that the completion of the rx urbs handler runs at a time when we already freed our data structures resulting in a kernel crash. Fixes: a82dfd33 ("wifi: rtw88: Add common USB chip support") Cc: stable@vger.kernel.org Reported-by:
Ilgaz Öcal <ilgaz@ilgaz.gen.tr> Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Acked-by:
-
Nathan Chancellor authored
clang warns (or errors with CONFIG_WERROR=y): drivers/net/wireless/realtek/rtw89/sar.c:216:3: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough] 216 | case RTW89_TAS_STATE_DPR_FORBID: | ^ drivers/net/wireless/realtek/rtw89/sar.c:216:3: note: insert 'break;' to avoid fall-through 216 | case RTW89_TAS_STATE_DPR_FORBID: | ^ | break; 1 error generated. Clang is a little more pedantic than GCC, which does not warn when falling through to a case that is just break or return. Clang's version is more in line with the kernel's own stance in deprecated.rst, which states that all switch/case blocks must end in either break, fallthrough, continue, goto, or return. Add the missing break to silence the warning. Closes: https://github.com/ClangBuiltLinux/linux/issues/1921 Fixes: eb2624f5 ("wifi: rtw89: Introduce Time Averaged SAR (TAS) feature") Signed-off-by:Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Acked-by:
-
Cheng-Chieh Hsieh authored
The ENV_MNTR(environment monitor) is the dynamic mechanism which based on the HW of CCX(Cisco Compatible Extensions) which provide the channel loading and noisy level indicator to debug or support the 802.11k. The PHYSTS provide the detail PHY information per packet we received for debugging. The DIG(dynamic initial gain) is the dynamic mechanism to adjust the packet detect power level by received signal strength to avoid false detection of the WiFi packet. The address of registers used for ENV_MNTR, PHYSTS and DIG of WiFi 7 IC are different with WiFi 6 series, so we modify the method to access the register address in order to compatible with all WiFi 7 and 6 ICs. Signed-off-by:
Cheng-Chieh Hsieh <cj.hsieh@realtek.com> Signed-off-by:
-
Ping-Ke Shih authored
cr_base is base address of PHY control register. The base of WiFi 6 and 7 chips are 0x1_0000 and 0x2_0000 respectively, so define them accordingly. For example, if PHY address is 0x1330, absolute address is 0x1_1330 for WiFi 6 chips, and 0x2_1330 for WiFi 7 chips. Meanwhile, there are two copies of PHY hardware named PHY0 and PHY1. The offset between them is 0x2_0000, so the base address of PHY0 and PHY1 are 0x2_0000 and 0x4_0000 respectively. Signed-off-by:
-
Ping-Ke Shih authored
rx_filter is used to decide which kind of packets are received to driver, or just dropped by MAC layer to reduce bus traffic. The bit definitions of old and new chips are the sames, but only address is changed, so define a field to generalize usage. Signed-off-by:
-
Ping-Ke Shih authored
Define base address of WiFi 7 internal memory according to design to provide the same functions as existing WiFi 6 chips. Signed-off-by:
-
Ping-Ke Shih authored
To diagnose abnormal behavior, we need to dump certain internal memory. For example, dump security CAM when debugging encryption/decryption problems, or dump BA CAM when debugging abnormal BlockAck. Since the indirect address and internal memory base address are different between WiFi 6 and 7 chips, add fields to reuse codes. Also, only WiFi 6 chips initialize DMAC and CMAC tables via this indirect interface, so no need to change the constant register address, and new firmware will help to initialize these tables. Signed-off-by:
-
Ping-Ke Shih authored
There are two copies of MAC hardware called band0 and band1. Basically, the only difference between them is base address, so we can share functions with a 'band' (or 'mac_idx') argument. The offset of base address of WiFi 6 and 7 are 0x2000 and 0x4000 respectively, so add band1_offset field to new introduced struct mac_gen_def to possibly reuse functions. Using below spatch script to convert callers: @@ expression reg, band; @@ - rtw89_mac_reg_by_idx(reg, band) + rtw89_mac_reg_by_idx(rtwdev, reg, band) @@ expression reg, port, band; @@ - rtw89_mac_reg_by_port(reg, port, band) + rtw89_mac_reg_by_port(rtwdev, reg, port, band) Signed-off-by:
-
Li Zetao authored
Use the module_sdio_driver macro to simplify the code, which is the same as declaring with module_init() and module_exit(). Signed-off-by:
Li Zetao <lizetao1@huawei.com> Signed-off-by:
-
Zong-Zhe Yang authored
We prepare to deal with multiple channels via new entity modes. * MCC_PREPARE: Transitional mode before MCC * MCC: Multi-Channel Concurrent mode And, enum of sub-entity is extended for second channel context. We add the entry flow of multi-channel handling and the core stuffs for extended index of sub-entity. And, we now deal with the filling of entity channels' info in entity recalc where we know the number of active chanctx. However, the other detail coding of MCC start/stop will be implemented in the following. Besides, chanctx listener struct is pre-added in chip info. Each component can add callback type in chanctx listener and configure its callback function to react according to chanctx states. We know at least RFK (RF calibration) and BTC (BT coexistence) will require such callbacks. Signed-off-by:
Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by:
-
Zong-Zhe Yang authored
Callers call renew function when wanting to generate a new P2P NoA information element, and call append function to append NoA attribute one by one. Then, updating beacon work will fetch the P2P NoA information element configured by callers and add it to beacon. The use case of MCC (multi-channel concurrent) <GO + STA> for example: * start MCC - GO part renew P2P NoA append period NoA after calculation * download beacon for GO fetch P2P NoA and add to beacon content * stop MCC - GO part renew P2P NoA (reset) Signed-off-by:
-
Zong-Zhe Yang authored
We adjust these processes which can work accodrding to vif but call rtw89_chan_get() with static RTW89_SUB_ENTITY_0. After multi-channel support, chanctx of vif won't always be on RTW89_SUB_ENTITY_0. So, we make them call rtw89_chan_get() with rtwvif->sub_entity_idx. Signed-off-by:
-
Zong-Zhe Yang authored
If multiple channels, SAR will be hard to determine the center frequency to query. Therefore, we move this decision out of SAR. Signed-off-by:
-
Zong-Zhe Yang authored
In rtw89_correct_cck_chan(), we turn to use rtw89_hw_to_nl80211_band(). The difference between rtw89_hw_to_nl80211_band() and the original raw judgement is the case on 6 GHz. Since rtw89_correct_cck_chan() is common code independent on chip, if runtime chip doesn't support 6 GHz, it is probably safe. Otherwise, it might not. Signed-off-by:
-
Zong-Zhe Yang authored
The request duration comes from coex mechanism, indicating the length of time that should be reserved for BT in each time division. It is required to handle update notification when channel concurrency processes. Since it will involve in both coex and wifi code flow, this commit ahead adds the prototype for required function interfaces to split the implementation of coex and wifi in the following. The follow-up are expected be add afterwards. 1. coex mechanism call rtw89_core_ntfy_btc_event() once bt req len changes 2. channel concurrency flow updates related stuffs when notified Signed-off-by:
-
Alan Stern authored
A mouse that uses a USB connection is called a "USB mouse" device (or "USB mouse" for short), not a "mouse USB" device. By analogy, a WiFi adapter that connects to the host computer via USB is a "USB wireless" device, not a "wireless USB" device. (The latter term more properly refers to a defunct Wireless USB specification, which described a technology for sending USB protocol messages over an ultra wideband radio link.) Similarly for a WiFi adapter card that plugs into a PCIe slot: It is a "PCIe wireless" device, not a "wireless PCIe" device. Rephrase the text in the kernel source where the word ordering is wrong. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
