- 16 May, 2024 19 commits
-
-
Karthikeyan Periyasamy authored
The current value of the MAX_RADIOS definition is 3. This is incorrect because no device supports more than 2 radios. An incorrect MAX_RADIOS value can lead to: - unnecessary memory allocation for pdev related entities. - invalid pdev id validation. - Misconceptions for code readers. Therefore, modify the MAX_RADIOS definition as 2. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by:
Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240514063412.3483723-3-quic_periyasa@quicinc.com
-
Karthikeyan Periyasamy authored
Remove the duplicate definition of MAX_RADIOS from the core header file. No functional changes, compile tested only. Signed-off-by:
-
Kang Yang authored
ath12k_mac_op_unassign_vif_chanctx() will do peer delete for WCN7850's monitor interface. But for host no need to do peer create/delete for monitor interface because firmware doesn't require it, QCN9274 is the same. Also, the first judgement is true only for WCN7850, so this logic won't affect QCN9274 at any time. So remove this peer delete. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by:
Kang Yang <quic_kangyang@quicinc.com> Acked-by:
-
Nithyanantham Paramasivam authored
We observe intermittent ping failures from the access point (AP) to station (STA) in any mode (AP-STA or Mesh) configured. Specifically, the transmission completion status is not received at tx completion ring id 4 (WBM2SW ring4) for the packets transmitted via TCL DATA ring id 3. This prevents freeing up tx descriptors and leads to buffer exhaustion. Currently, during initialization of the WBM2SW ring, we are directly mapping the ring number to the ring mask to obtain the ring mask group index. This approach is causing setup failures for WBM2SW ring 4. Similarly, during runtime, when receiving incoming transmission completion status, the validation of the ring number by mapping the interrupted ring mask. This is resulting in validation failure. Thereby preventing entry into the completion handler ath12k_dp_tx_completion_handler(). The existing design assumed that the ring numbers would always be sequential and could be directly mapped with the ring mask. However, this assumption does not hold true for WBM2SW ring 4. Therefore, modify the design such that, instead of mapping the ring number, the ring ID is mapped with the ring mask. According to this design: 1. During initialization of the WBM2SW ring, mapping the ring ID to the ring mask will ensure obtaining the correct ring mask group ID. 2. During runtime, validating the interrupted ring mask group ID within the transmission completion group is sufficient. This approach allows the ring ID to be derived from the interrupted ring mask and enables entry into the completion handler. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d8899132 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by:
Nithyanantham Paramasivam <quic_nithp@quicinc.com> Acked-by:
-
Aloka Dixit authored
Remove the unnecessary WMI vdev down operation as firmware internally does so already as part of WMI vdev restart. Repeated vdev down results in a firmware crash during channel switch operation when multiple BSSID advertisements are enabled: ath12k_pci 0000:06:00.0: firmware crashed: MHI_CB_SYS_ERROR ath12k_pci 0000:06:00.0: failed to send WMI_VDEV_SET_PARAM_CMDID ath12k_pci 0000:06:00.0: failed to set vdev 5 HE MU mode: -108 param_value 7b ath12k_pci 0000:06:00.0: failed to set he mode vdev 5 ath12k_pci 0000:06:00.0: failed to restart vdev 5: -108 ath12k_pci 0000:06:00.0: failed to send WMI_VDEV_SET_PARAM_CMDID ath12k_pci 0000:06:00.0: failed to set vdev 4 HE MU mode: -108 param_value 7b ath12k_pci 0000:06:00.0: failed to set he mode vdev 4 ath12k_pci 0000:06:00.0: failed to restart vdev 4: -108 ath12k_pci 0000:06:00.0: failed to send WMI_VDEV_SET_PARAM_CMDID Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Aloka Dixit <quic_alokad@quicinc.com> Acked-by:
-
Aloka Dixit authored
Add new function ath12k_mac_setup_bcn_tmpl_ema() which retrieves a list of EMA (Enhanced Multi-BSSID Advertisements) beacon templates from mac80211 and sends all to firmware. Add support to send EMA configurations to firmware by adding a new parameter 'ema_params' in struct wmi_bcn_tmpl_cmd. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Aloka Dixit authored
- A single beacon template is used for one multiple BSSID group as only one interface from group transmits the beacons. But firmware requires the host to send this template each time a nontransmitted interface is brought up. Hence, modify existing logic to retrieve the template from vif context of the transmitting interface. Also, firmware crashes if host sends a template for a nontransmitted interface which is already up, add a check to avoid this. - Set rsnie_present and wpaie_present fields for nontransmitted VAPs. - Send offset to the multiple BSSID element in the beacon template firmware. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Aloka Dixit authored
Configure security parameters in a separate function to make it easier to support setting the same for nontransmitted profiles. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Aloka Dixit authored
Include MBSSID parameters in WMI vdev up operation. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Aloka Dixit authored
Host needs to send multiple BSSID configurations to firmware for each vdev in ath12k_wmi_vdev_up() for AP mode. This function accepts individual input parameters hence any new argument will require changes to all callers. Most of these will use default value (0 or NULL). Create a structure for the function arguments and include objects with all members initialized to zero to minimize future changes. Tested-on : QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Aloka Dixit authored
Rename trans_bssid to tx_vdev_bssid to make it similar to vdev_bssid. Rename profile_num to nontx_profile_cnt, and profile_idx to nontx_profile_idx which make it clear that these configurations correspond to nontransmitted MBSSID profiles. These members are currently unused in the driver. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Aloka Dixit authored
Configure multiple BSSID flags and vdev_id of the transmited profile in vdev create/start commands depending on the service bit WMI_TLV_SERVICE_MBSS_PARAM_IN_VDEV_START_SUPPORT. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Aloka Dixit authored
Advertise the driver support for multiple BSSID (MBSSID) and enhanced multi-BSSID advertisements (EMA) by setting extended capabilities. Configure mbssid_max_interfaces and ema_max_profile_periodicity fields in structure wiphy which are used to advertise maximum number of interfaces and profile periodicity supported by the driver. Add new WMI fields to configure maximum vdev count supported for MBSSID and profile periodicity in case of EMA. Set WMI_RSRC_CFG_FLAGS2_CALC_NEXT_DTIM_COUNT_SET flag to allow firmware to track and update the DTIM counts for each nontransmitted profile. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Pradeep Kumar Chitrapu authored
Parse SMPS configuration from IEs and configure. Without this, SMPS is not enabled for 6 GHz band. This is disabled for WCN7850 as hardware does not support it. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by:
Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Acked-by:
-
Pradeep Kumar Chitrapu authored
Move fetching SMPS value to a new function and use u16_get_bits to extract it from capabilities. This will help in extending the functionality when SMPS support in 6 GHz band gets added in subsequent patches. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by:
-
Pradeep Kumar Chitrapu authored
Currently A-MPDU aggregation parameters are not being configured during peer association for 6 GHz band. Hence, extract these parameters from station's capabilities received in association request and send to firmware. Without this, A-MPDU aggregation is not happening in 6 GHz band. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Co-developed-by:
Avula Sri Charan <quic_asrichar@quicinc.com> Signed-off-by:
-
Pradeep Kumar Chitrapu authored
When ath12k receives survey request, choose the 6 GHz band when enabled. Without this, survey requests do not include any 6 GHz band results, leading to failures in auto channel selection. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by:
-
Pradeep Kumar Chitrapu authored
The frequency in the rx status is currently being filled incorrectly for the 6 GHz band. The channel number received is invalid in this case, resulting in packet drops. Fix this issue by correcting the frequency calculation. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d8899132 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by:
-
Pradeep Kumar Chitrapu authored
Add support for the 6 GHz channel 2 with center frequency 5935 MHz and operating class 136 per IEEE Std 802.11ax-2021, Table E-4. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by:
-
- 15 May, 2024 1 commit
-
-
Sebastian Gottschall authored
Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984 based chipsets with on chipset connected led's using WMI Firmware API. The LED device will get available named as "ath10k-phyX" at sysfs and can be controlled with various triggers. Adds also debugfs interface for gpio control. Signed-off-by:
Sebastian Gottschall <s.gottschall@dd-wrt.com> Reviewed-by:
Steve deRosier <derosier@cal-sierra.com> [kvalo: major reorg and cleanup] Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> [ansuel: rebase and small cleanup] Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Tested-by:
Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by:
-
- 13 May, 2024 9 commits
-
-
Breno Leitao authored
Embedding net_device into structures prohibits the usage of flexible arrays in the net_device structure. For more details, see the discussion at [1]. Un-embed the net_device from struct ath12k_ext_irq_grp by converting it into a pointer. Then use the leverage alloc_netdev_dummy() to allocate the net_device object at ath12k_pci_ext_irq_config(). The free of the device occurs at ath12k_pci_free_ext_irq(). Link: https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/ [1] Signed-off-by:
Breno Leitao <leitao@debian.org> Signed-off-by:
-
Marc Gonzalez authored
The ath10k driver waits for an "MSA_READY" indicator to complete initialization. If the indicator is not received, then the device remains unusable. Several msm8998-based devices are affected by this issue. Oddly, it seems safe to NOT wait for the indicator, and proceed immediately when QMI_EVENT_SERVER_ARRIVE. fw_version 0x100204b2 fw_build_timestamp 2019-09-04 03:01 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.1.0-01202-QCAHLSWMTPLZ-1.221523.2 Jeff Johnson wrote: The feedback I received was "it might be ok to change all ath10k qmi to skip waiting for msa_ready", and it was pointed out that ath11k (and ath12k) do not wait for it. However with so many deployed devices, "might be ok" isn't a strong argument for changing the default behavior. Signed-off-by:
Marc Gonzalez <mgonzalez@freebox.fr> Reviewed-by:
Bjorn Andersson <quic_bjorande@quicinc.com> Acked-by:
-
Marc Gonzalez authored
The ath10k driver waits for an "MSA_READY" indicator to complete initialization. If the indicator is not received, then the device remains unusable. cf. ath10k_qmi_driver_event_work() Several msm8998-based devices are affected by this issue. Oddly, it seems safe to NOT wait for the indicator, and proceed immediately when QMI_EVENT_SERVER_ARRIVE. Jeff Johnson wrote: The feedback I received was "it might be ok to change all ath10k qmi to skip waiting for msa_ready", and it was pointed out that ath11k (and ath12k) do not wait for it. However with so many deployed devices, "might be ok" isn't a strong argument for changing the default behavior. Kalle Valo first suggested setting a bit in firmware-5.bin to trigger work-around in the driver. However, firmware-5.bin is parsed too late. So we are stuck with a DT property. Signed-off-by:
Rob Herring (Arm) <robh@kernel.org> Signed-off-by:
-
Jeff Johnson authored
smatch flagged the following issue: drivers/net/wireless/ath/ath12k/dp_rx.c:4065 ath12k_dp_rxdma_ring_sel_config_wcn7850() error: uninitialized symbol 'ret'. In ath12k_dp_rxdma_ring_sel_config_wcn7850() if it were ever the case that ab->hw_params->num_rxdma_per_pdev was 0 then 'ret' would be uninitialized when it is returned. This should never be the case, but to be safe and to quiet smatch, add an initializer to the declaration of 'ret'. No functional changes, compile tested only. Signed-off-by:
-
Jeff Johnson authored
The ath12k_hw_params member num_rxmda_per_pdev contains a misspelling of "dma" so fix it. No functional changes, compile tested only. Signed-off-by:
-
Jeff Johnson authored
The ath11k_hw_params member num_rxmda_per_pdev contains a misspelling of "dma" so fix it. No functional changes, compile tested only. Signed-off-by:
-
Karthikeyan Periyasamy authored
Currently, ath12k_wmi_pdev_dma_ring_cfg() fails due to an invalid pdev_id parameter passed to the WMI_PDEV_DMA_RING_CFG_REQ_CMDID WMI command. This invalid pdev_id is caused by a double conversion of the MAC ID. Since the the caller of ath12k_wmi_pdev_dma_ring_cfg() already performs the MAC ID conversion, it is unnecessary to do it again within the function. To fix this, remove the software (SW) to hardware (HW) MAC ID conversion from ath12k_wmi_pdev_dma_ring_cfg() to avoid this redundant conversion. Found in code review. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Jeff Johnson authored
smatch flagged the following issue: drivers/net/wireless/ath/ath11k/qmi.c:2401 ath11k_qmi_load_file_target_mem() error: uninitialized symbol 'ret'. The reality is that 'ret' is initialized in every path through ath11k_qmi_load_file_target_mem() except one, the case where the input 'len' is 0, and hence the "while (remaining)" loop is never entered. But to make sure this case is also handled, add an initializer to the declaration of 'ret'. No functional changes, compile tested only. Signed-off-by:
-
Jeff Johnson authored
smatch flagged the following issue: drivers/net/wireless/ath/ath12k/qmi.c:2619 ath12k_qmi_load_file_target_mem() error: uninitialized symbol 'ret'. The reality is that 'ret' is initialized in every path through ath12k_qmi_load_file_target_mem() except one, the case where the input 'len' is 0, and hence the "while (remaining)" loop is never entered. But to make sure this case is also handled, add an initializer to the declaration of 'ret'. No functional changes, compile tested only. Signed-off-by:
-
- 07 May, 2024 9 commits
-
-
Kang Yang authored
In ath12k_mac_op_assign_vif_chanctx(), there is a logic to create peer using ar->mac_addr for a STA vdev. This is invalid because a STA vdev should have a peer created using AP's MAC address. Besides, if we run into that logic, it means a peer has already been created earlier, we should not create it again. So remove it. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by:
-
Kang Yang authored
ath12k_mac_op_unassign_vif_chanctx() will do vdev down in function ath12k_mac_monitor_stop(). So no need to do vdev down again. remove the duplicated one. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by:
-
Kang Yang authored
ath12k_mac_op_unassign_vif_chanctx() will do vdev stop in ath12k_mac_monitor_stop(). This ath12k_mac_vdev_stop() will do vdev stop again, then might trigger firmware crash. So add judgement to avoid duplicated vdev stop. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: c9e4e41e ("wifi: ath12k: move peer delete after vdev stop of station for WCN7850") Signed-off-by:
-
Kang Yang authored
monitor_flags is defined in struct ath12k. Although it is changed in some places, but it is not actually used. So remove related code. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by:
-
Tamizh Chelvam Raja authored
Currently memory allocation for multiple hardware rings done in host as these memory will be used by firmware/hardware. But in case of tcl_cmd_ring and tcl_status_ring neither firmware nor hardware uses host allocated memory and it uses memory allocated by firmware itself. So avoid tcl_cmd_ring and tcl_status_ring setup in host. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> Acked-by:
-
Tamizh Chelvam Raja authored
Currently tx monitor is not supported in driver. So remove the tx monitor ring configuration, allocation and handling. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Tamizh Chelvam Raja authored
Currently in ath12k_dp_tx_htt_monitor_mode_ring_config() ath12k_dp_tx_htt_tx_monitor_mode_ring_config() function wrongly called twice. Fix that by calling ath12k_dp_tx_htt_rx_monitor_mode_ring_config(). Currently monitor mode is disabled in driver so the change is compile tested and boot sequence verified. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Breno Leitao authored
Embedding net_device into structures prohibits the usage of flexible arrays in the net_device structure. For more details, see the discussion at [1]. Un-embed the net_device from struct wil6210_priv by converting it into a pointer. Then use the leverage alloc_netdev_dummy() to allocate the net_device object at wil_if_add(). The free of the device occurs at wil_if_remove(). Link: https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/ [1] Signed-off-by:
-
Venkateswara Naralasetty authored
If STATUS_BUFFER_DONE is not set for a monitor status ring entry, we don't process the status ring until STATUS_BUFFER_DONE set for that status ring entry. During LMAC reset it may happen that hardware will not write STATUS_BUFFER_DONE tlv in status buffer, in that case we end up waiting for STATUS_BUFFER_DONE leading to backpressure on monitor status ring. To fix the issue, when HP (Head Pointer) + 1 entry is peeked and if DMA is not done and if HP + 2 entry's DMA done is set, replenish HP + 1 entry and start processing in next interrupt. If HP + 2 entry's DMA done is not set, poll onto HP + 1 entry DMA done to be set. Also, during monitor attach HP points to the end of the ring and TP (Tail Pointer) points to the start of the ring. Using ath11k_hal_srng_src_peek() may result in processing invalid buffer for the very first interrupt. Since, HW starts writing buffer from TP. To avoid this issue call ath11k_hal_srng_src_next_peek() instead of calling ath11k_hal_srng_src_peek(). Tested-on: IPQ5018 hw1.0 AHB WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Venkateswara Naralasetty <quic_vnaralas@quicinc.com> Co-developed-by:
-
- 03 May, 2024 2 commits
-
-
Karthikeyan Kathirvel authored
In mesh node traffic, internal firmware-transmitted failures are reported as transmitted failures in mesh metric calculation, leading to the breakage of the mesh link. Fix the issue by dropping the internal firmware-transmitted failures before updating the TX completion status to mac80211, in order to prevent false failure averaging in mesh metric calculation. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: d8899132 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by:
Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Acked-by:
-
Sven Eckelmann authored
When a station idles for a long time, hostapd will try to send a QoS Null frame to the station as "poll". NL80211_CMD_PROBE_CLIENT is used for this purpose. And the skb will be added to ack_status_frame - waiting for a completion via ieee80211_report_ack_skb(). But when the peer was already removed before the tx_complete arrives, the peer will be missing. And when using dev_kfree_skb_any (instead of going through mac80211), the entry will stay inside ack_status_frames thus not clean up related information in its internal data structures. This IDR will therefore run full after 8K request were generated for such clients. At this point, the access point will then just stall and not allow any new clients because idr_alloc() for ack_status_frame will fail. ieee80211_free_txskb() on the other hand will (when required) call ieee80211_report_ack_skb() and make sure that (when required) remove the entry from the ack_status_frame and clean up related information in its internal data structures. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: d8899132 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Sarika Sharma <quic_sarishar@quicinc.com> Signed-off-by:
-
