- 15 Dec, 2021 22 commits
-
-
Dmitry Osipenko authored
Enable HDMI CEC on Nyan Chromebooks. It allows to control TV over HDMI. Suggested-by: Thomas Graichen <thomas.graichen@gmail.com> Tested-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Stefan Eichenberger authored
If an USB port is an OTG port, then we should add the usb-role-switch property. Otherwise XUSB setup fails and therefore padctl is unable to set up the ports. This leads to broken USB and PCIe ports. Add the usb-role-switch properties to Tegra124 device-trees to fix the problem. The error message shown without this patch is e.g: usb2-0: usb-role-switch not found for otg mode [digetx@gmail.com: improved commit message] Tested-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Dmitry Osipenko authored
Add dedicated device-tree for 1080p version of Nyan Big in order to describe display panel properly. FHD panel doesn't support modes other than 1080p, hence it's wrong to use incompatible lower resolution panel in device-tree. Tested-by: Thomas Graichen <thomas.graichen@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Svyatoslav Ryhel authored
Add device-tree for Pegatron Chagall, which is a NVIDIA Tegra30-based Android tablet. Link: https://wiki.postmarketos.org/wiki/Pegatron_Chagall_(pegatron-chagall)Co-developed-by: Raffaele Tranquillini <raffaele.tranquillini@gmail.com> Signed-off-by: Raffaele Tranquillini <raffaele.tranquillini@gmail.com> Co-developed-by: Ion Agorria <ion@agorria.com> Signed-off-by: Ion Agorria <ion@agorria.com> Co-developed-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [treding@nvidia.com: cosmetic fixups] Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Anton Bambura authored
Add device-tree for Tegra114-based ASUS Transformer Pad TF701T (K00C) tablet. Link: https://wiki.postmarketos.org/wiki/ASUS_Transformer_Pad_(TF701T)_(asus-tf701t)Signed-off-by: Anton Bambura <jenneron@protonmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [treding@nvidia.com: cosmetic fixups] Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Svyatoslav Ryhel authored
Add device-tree for ASUS Transformer Infinity TF700T, which is a NVIDIA Tegra30-based 2-in-1 detachable, originally running Android. Link: https://wiki.postmarketos.org/wiki/Asus_Transformer_Pad_Infinity_TF700T_(asus-tf700t)Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> Tested-by: Jasper Korten <jja2000@gmail.com> Co-developed-by: Ion Agorria <ion@agorria.com> Signed-off-by: Ion Agorria <ion@agorria.com> Co-developed-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Co-developed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [treding@nvidia.com: cosmetic fixups] Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Svyatoslav Ryhel authored
Add device-tree for ASUS Transformer Pad TF300TG, which is a NVIDIA Tegra30-based 2-in-1 detachable, originally running Android. It's a variant of the TF300T that has a 3G modem. Link: https://wiki.postmarketos.org/wiki/ASUS_Transformer_Pad_(asus-tf300t)Co-developed-by: Ion Agorria <ion@agorria.com> Signed-off-by: Ion Agorria <ion@agorria.com> Co-developed-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [treding@nvidia.com: cosmetic fixups] Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Michał Mirosław authored
Add device-tree for ASUS Transformer Pad TF300T, which is a NVIDIA Tegra30-based 2-in-1 detachable, originally running Android. Link: https://wiki.postmarketos.org/wiki/ASUS_Transformer_Pad_(asus-tf300t)Tested-by: Ihor Didenko <tailormoon@rambler.ru> Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> Co-developed-by: Ion Agorria <ion@agorria.com> Signed-off-by: Ion Agorria <ion@agorria.com> Co-developed-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com> Co-developed-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [treding@nvidia.com: cosmetic fixups] Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Svyatoslav Ryhel authored
Add device-tree for ASUS Transformer Prime TF201, which is a NVIDIA Tegra30-based 2-in-1 detachable, orignally running Android. Link: https://wiki.postmarketos.org/wiki/ASUS_Transformer_Prime_(asus-tf201)Co-developed-by: Ion Agorria <ion@agorria.com> Signed-off-by: Ion Agorria <ion@agorria.com> Co-developed-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [treding@nvidia.com: cosmetic fixups] Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Maxim Schwalm authored
All Tegra30 ASUS tablets have a similar design pattern in terms of hardware integration of LVDS display panels, like exactly the same GPIOs are used for power and reset, etc. Add a common device-tree for LVDS display panels of Tegra30 ASUS tablets to avoid replicating the boilerplate panel description. [digetx@gmail.com: factored out common part into separate patch and wrote commit message] Co-developed-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Svyatoslav Ryhel authored
Add common DTSI for Tegra30 ASUS Transformers. It will be used by multiple device-trees of ASUS devices. The common part initially was born out of the ASUS TF300T tablet's device-tree that was created by Michał Mirosław. It was heavily reworked and improved by Svyatoslav Ryhel, Maxim Schwalm, Ion Agorria et al. [digetx@gmail.com: factored out common part into separate patch and wrote commit message] Co-developed-by: Ion Agorria <ion@agorria.com> Signed-off-by: Ion Agorria <ion@agorria.com> Co-developed-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com> Co-developed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [treding@nvidia.com: cosmetic fixups] Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Nikola Milosavljevic authored
Add device-tree for Tegra20-based ASUS Transformer EeePad TF101. Link: https://wiki.postmarketos.org/wiki/ASUS_Eee_Pad_Transformer_(asus-tf101)Co-developed-by: David Heidelberg <david@ixit.cz> Signed-off-by: David Heidelberg <david@ixit.cz> Co-developed-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Co-developed-by: Antoni Aloy Torrens <aaloytorrens@gmail.com> Signed-off-by: Antoni Aloy Torrens <aaloytorrens@gmail.com> Signed-off-by: Nikola Milosavljevic <mnidza@outlook.com> Co-developed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [treding@nvidia.com: cosmetic fixups] Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
Move the default state pinmux definition into the pinmux node. There's no need for the indirection via the phandle. Note that the phandle indirection is kept for the EMC operating performance point tables because they reference nodes that are defined in an external file. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
Use the correct "reset-gpios" property for the I2C mux reset GPIO reference instead of the deprecated "reset-gpio" property. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
The SLINK controller found on Tegra30 is not compatible with its predecessor found on Tegra20. Drop the fallback compatible string. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
The Ouya board specifies the #reset-cells property for the GPIO controller. Since the GPIO controller doesn't provide reset controls this is not needed, so they can be dropped. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
David Heidelberg authored
The clock-frequency property was never used and is deprecated now. Remove it from Nexus 7 device-tree. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
The +V1.2_VDD_CORE regulator on Apalis and Colibri boards uses the unsupported ti,vsel{0,1}-state-low properties. It turns out that these are in fact the default and can be overridden by ti,vsel{0,1}-state-high properties if needed. Drop them since they are not needed. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
The correct vendor prefix for Invensense is "invensense," rather than "invn,". Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
The Medcom Wide and PAZ00 boards don't specify the power supply for the backlight, which means that the Linux driver will provide a dummy one. Wire up an explicit dummy to also make the DT schema validation succeed. Unfortunately I don't have access to the schematics for the Medcom Wide, so I don't know if a more accurate description is possible. The AC100 (PAZ00) schematics from here: https://www.s-manuals.com/pdf/motherboard/compal/compal_la-6352p_r1.0a_schematics.pdf aren't entirely clear which one of the supplies powers backlight, but the panel supply is probably close enough. Based on work by David Heidelberg <david@ixit.cz>. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
The PHY reset GPIO references belong in the USB PHY nodes, where they already exist. There is no need to keep them in the USB controller's device tree node as well. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
The device tree node for the built-in ASIX Ethernet device on Colibri boards needs a compatible string in order to pass DT schema validation. Add the USB VID,PID compatible string as required by the DT schema for USB devices. Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
-
- 14 Dec, 2021 16 commits
-
-
Thierry Reding authored
The "pwm-" prefix currently matches the DT schema for PWM controllers and throws an error in that case. This is something that should be fixed in the PWM DT schema, but in this case we can also preempt any such conflict by naming the nodes after the pins like we do for many others of these nodes. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
Make the order of the clocks and clock-names properties match the order in the device tree bindings. This isn't strictly necessary from a point of view of the operating system because matching will be done based on the clock-names, but it makes it easier to validate the device trees against the DT schema. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
The CML1 and PLL_E clocks are never explicitly used by the AHCI controller found on Tegra124, so drop them from the corresponding device tree node. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
The I2C controller found on Tegra124 is not fully compatible with the Tegra114 version, so drop the fallback compatible string from the list. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Dmitry Osipenko authored
OPP table name now should start with "opp-table" and OPP entries shouldn't contain commas and @ signs in accordance to the new schema requirement. Reorganize CPU and EMC OPP table device-tree nodes. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
The DT schema requires that nodes representing thermal zones include a "-thermal" suffix in their name. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
When the Tegra High-Speed UART is used instead of the regular UART, the reg-shift property is implied from the compatible string and should not be explicitly listed. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
In order to be able to pass DT schema validation, change the GPU nodes' unit-address to the standard notation. Previously this was using a "0," prefix that originated from a time when the top-level device tree node contained #address-cells = <2>. Note that this technically breaks backwards-compatibility with certain older versions of the U-Boot bootloader because early versions used a hard-coded DT path lookup to find the GPU node and perform some fixups on it. However, this was changed to a compatible string based lookup in April 2016, so it's reasonable to expect people to update U-Boot on the systems that they want to use this updated kernel DTB with. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
GPIO hog nodes must have a "hog-" prefix or "-hog" suffix according to the DT schema. Rename all such nodes to allow validation to pass. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
The Tegra memory controller provides reset controls for hotflush reset, so the #reset-cells property must be specified. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
The TKE (time-keeping engine) found on Tegra114 and later is no longer backwards compatible with the version found on Tegra20, so update the compatible string list accordingly. Note that while the hardware block is strictly backwards-compatible, an architectural timer exists on those newer SoCs that is more reliable, so that should always be preferred. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Dmitry Osipenko authored
Regulators defined at the top level in device tree are no longer part of a simple bus and therefore don't have a reg property. Nodes without a reg property shouldn't have a unit-address either, so drop the unit address from the node names. To ensure nodes aren't duplicated (in which case they would end up merged in the final DTB), append the name of the regulator to the node name. [treding@nvidia.com: factored out patch and wrote commit message] Signed-off-by: David Heidelberg <david@ixit.cz> Co-developed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
-
David Heidelberg authored
Clocks defined at the top level in device tree are no longer part of a simple bus and therefore don't have a reg property. Nodes without a reg property shouldn't have a unit-address either, so drop the unit address from the node names. To ensure nodes aren't duplicated (in which case they would end up merged in the final DTB), append the name of the clock to the node name. [treding@nvidia.com: factored out patch and wrote commit message] Signed-off-by: David Heidelberg <david@ixit.cz> Co-developed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
SPI flash chip nodes should be named "flash" instead of "spi-flash". Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
The PMIC found on Dalmore, TN7 and Roth is a TPS65913, so add the specific compatible string in addition to the generic Palmas series compatible string. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
The external memory controller should be sorted after the memory controller to keep the ordering by unit-address intact. Signed-off-by: Thierry Reding <treding@nvidia.com>
-
- 14 Nov, 2021 2 commits
-
-
Linus Torvalds authored
-
Gustavo A. R. Silva authored
Add Kconfig support for -Wimplicit-fallthrough for both GCC and Clang. The compiler option is under configuration CC_IMPLICIT_FALLTHROUGH, which is enabled by default. Special thanks to Nathan Chancellor who fixed the Clang bug[1][2]. This bugfix only appears in Clang 14.0.0, so older versions still contain the bug and -Wimplicit-fallthrough won't be enabled for them, for now. This concludes a long journey and now we are finally getting rid of the unintentional fallthrough bug-class in the kernel, entirely. :) Link: https://github.com/llvm/llvm-project/commit/9ed4a94d6451046a51ef393cd62f00710820a7e8 [1] Link: https://bugs.llvm.org/show_bug.cgi?id=51094 [2] Link: https://github.com/KSPP/linux/issues/115 Link: https://github.com/ClangBuiltLinux/linux/issues/236Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-