- 14 Aug, 2023 1 commit
-
-
Kent Overstreet authored
- bio_set_pages_dirty(), bio_check_pages_dirty() - dio path - blk_status_to_str() - error messages - bio_add_folio() - this should definitely be exported for everyone, it's the modern version of bio_add_page() Signed-off-by:
Kent Overstreet <kent.overstreet@gmail.com> Cc: linux-block@vger.kernel.org Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
Kent Overstreet <kent.overstreet@linux.dev> Link: https://lore.kernel.org/r/20230813182636.2966159-2-kent.overstreet@linux.devSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 11 Aug, 2023 1 commit
-
-
Ming Lei authored
The added check of 'req_op(req) == REQ_OP_ZONE_APPEND' should have been done after the request is confirmed as valid. Actually here, the request should always been true, so add one WARN_ON_ONCE(!req), meantime move the zone_append check after checking the request. Cc: Andreas Hindborg <a.hindborg@samsung.com> Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Fixes: 29802d7c ("ublk: enable zoned storage support") Signed-off-by:
Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230811135216.420404-1-ming.lei@redhat.comSigned-off-by:
-
- 10 Aug, 2023 4 commits
-
-
Jens Axboe authored
A previous commit added a lockdep annotation, but botched it. Use the right type. Fixes: 4eb44d10 ("block: remove init_mutex and open-code blk_iolatency_try_init") Signed-off-by:
-
Arnd Bergmann authored
This is the module init function, which by definition is used only locally, so mark it static to avoid a warning: drivers/block/swim3.c:1280:5: error: no previous prototype for 'swim3_init' [-Werror=missing-prototypes] Reviewed-by:
Jack Wang <jinpu.wang@ionos.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Li Lingfeng authored
Commit a13696b8 ("blk-iolatency: Make initialization lazy") adds a mutex named "init_mutex" in blk_iolatency_try_init for the race condition of initializing RQ_QOS_LATENCY. Now a new lock has been add to struct request_queue by commit a13bd91b ("block/rq_qos: protect rq_qos apis with a new lock"). And it has been held in blkg_conf_open_bdev before calling blk_iolatency_init. So it's not necessary to keep init_mutex in blk_iolatency_try_init, just remove it. Since init_mutex has been removed, blk_iolatency_try_init can be open-coded back to iolatency_set_limit() like ioc_qos_write(). Signed-off-by:
Li Lingfeng <lilingfeng3@huawei.com> Reviewed-by:
Michal Koutný <mkoutny@suse.com> Link: https://lore.kernel.org/r/20230810035111.2236335-1-lilingfeng@huaweicloud.comSigned-off-by:
-
Li Zetao authored
There are two warnings reported by smatch: drivers/block/ublk_drv.c:445 ublk_setup_iod_zoned() warn: signedness bug returning '(-95)' drivers/block/ublk_drv.c:963 ublk_setup_iod() warn: signedness bug returning '(-5)' The type of "blk_status_t" is either be a u32 or u8, but this two functions return a negative value when not supported or failed. Use the error code of the blk module to fix these warnings. Fixes: 29802d7c ("ublk: enable zoned storage support") Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Li Zetao <lizetao1@huawei.com> Reviewed-by:
-
- 09 Aug, 2023 4 commits
-
-
Jinyoung Choi authored
In general, the bvec data structure consists of one for physically continuous pages. But, in the bvec configuration for bip, physically continuous integrity pages are composed of each bvec. Allow bio_integrity_add_page() to create multi-page bvecs, just like the bio payloads. This simplifies adding larger payloads, and fixes support for non-tiny workloads with nvme, which stopped using scatterlist for metadata a while ago. Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Fixes: 783b94bd ("nvme-pci: do not build a scatterlist to map metadata") Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jinyoung Choi <j-young.choi@samsung.com> Tested-by:
"Martin K. Petersen" <martin.petersen@oracle.com> Reviewed-by:
-
Jinyoung Choi authored
bio_integrity_add_page() returns the add length if successful, else 0, just as bio_add_page. Simply check return value checking in bio_integrity_prep to not deal with a > 0 but < len case that can't happen. Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by:
-
Jinyoung Choi authored
Previously, the bip's bi_size has been set before an integrity pages were added. If a problem occurs in the process of adding pages for bip, the bi_size mismatch problem must be dealt with. When the page is successfully added to bvec, the bi_size is updated. The parts affected by the change were also contained in this commit. Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by:
-
Jinyoung Choi authored
This will be used for multi-page configuration for integrity payload. Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by:
-
- 08 Aug, 2023 7 commits
-
-
Zhiguo Niu authored
The original formula was inaccurate: dd->async_depth = max(1UL, 3 * q->nr_requests / 4); For write requests, when we assign a tags from sched_tags, data->shallow_depth will be passed to sbitmap_find_bit, see the following code: nr = sbitmap_find_bit_in_word(&sb->map[index], min_t (unsigned int, __map_depth(sb, index), depth), alloc_hint, wrap); The smaller of data->shallow_depth and __map_depth(sb, index) will be used as the maximum range when allocating bits. For a mmc device (one hw queue, deadline I/O scheduler): q->nr_requests = sched_tags = 128, so according to the previous calculation method, dd->async_depth = data->shallow_depth = 96, and the platform is 64bits with 8 cpus, sched_tags.bitmap_tags.sb.shift=5, sb.maps[]=32/32/32/32, 32 is smaller than 96, whether it is a read or a write I/O, tags can be allocated to the maximum range each time, which has not throttling effect. In addition, refer to the methods of bfg/kyber I/O scheduler, limit ratiois are calculated base on sched_tags.bitmap_tags.sb.shift. This patch can throttle write requests really. Fixes: 07757588 ("block/mq-deadline: Reserve 25% of scheduler tags for synchronous requests") Signed-off-by:
Zhiguo Niu <zhiguo.niu@unisoc.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/1691061162-22898-1-git-send-email-zhiguo.niu@unisoc.comSigned-off-by:
-
Andreas Hindborg authored
Add zoned storage support to ublk: report_zones and operations: - REQ_OP_ZONE_OPEN - REQ_OP_ZONE_CLOSE - REQ_OP_ZONE_FINISH - REQ_OP_ZONE_RESET - REQ_OP_ZONE_APPEND The zone append feature uses the `addr` field of `struct ublksrv_io_cmd` to communicate ALBA back to the kernel. Therefore ublk must be used with the user copy feature (UBLK_F_USER_COPY) for zoned storage support to be available. Without this feature, ublk will not allow zoned storage support. Signed-off-by:
Andreas Hindborg <a.hindborg@samsung.com> Reviewed-by:
-
Andreas Hindborg authored
In preparation for zoned storage support, move the check for empty `addr` field into the command handler case statement. Note that the check makes no sense for `UBLK_IO_NEED_GET_DATA` because the `addr` field must always be set for this command. Signed-off-by:
-
Andreas Hindborg authored
This will be used by ublk zoned storage support. Signed-off-by:
Damien Le Moal <dlemoal@kernel.org> Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20230804114610.179530-2-nmi@metaspace.dkSigned-off-by:
-
Chengming Zhou authored
The iocg can have three throttled metrics: wait, debt, delay. This patch add missing wait_ms to IocgStat to show the latest wait_ms of iocg. As we are here, group iocg usage percents "inflt%" and "usage%" together, and group iocg throttled metrics "wait", "debt" and "delay" together. Effect after changes: nvme0n1 RUN per=50.0ms cur_per=177105.713:v1053528.587 busy= +0 vrate=135.00%:270.00% params=ssd_dfl(CQ) active weight hweight% inflt% usage% wait debt delay InterfererGroup0 * 100/ 100 54.28/ 9.09 0.34 24.07 0.00 0.00 0.00 interfered * 84/ 1000 45.72/ 90.91 0.48 41.09 0.00 0.00 0.00 Signed-off-by:Chengming Zhou <zhouchengming@bytedance.com> Acked-by:
Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20230804065039.8885-3-chengming.zhou@linux.devSigned-off-by:
-
Chengming Zhou authored
The real vrate iocost inuse is not base_vrate, but the atomic vtime_rate. We need iocost_monitor tool to display this real vrate that iocost use, to check if the boosted compensated vrate is normal. Effect after change: nvme0n1 RUN per=50.0ms cur_per=172116.580:v1040587.433 busy= +0 \ vrate=135.00%:270.00% params=ssd_dfl(CQ) ^ | this is real vrate inuse Signed-off-by: -
Chengming Zhou authored
When I use iocost_monitor on nvme0n1, this error shows up: "Could not find ioc for nvme0n1" There is no kobj in struct queue in recent kernel, it seems that the commit 2bd85221 ("block: untangle request_queue refcounting from sysfs") move the queue kobj to struct gendisk. Fix it by using mq_kobj which is at the same level with queue kobj. Signed-off-by:
-
- 04 Aug, 2023 1 commit
-
-
Li Zetao authored
There are some compile errors reported by kernel test robot: arm-linux-gnueabi-ld: fs/romfs/storage.o: in function `romfs_dev_read': storage.c:(.text+0x64): undefined reference to `__brelse' arm-linux-gnueabi-ld: storage.c:(.text+0x9c): undefined reference to `__bread_gfp' arm-linux-gnueabi-ld: fs/romfs/storage.o: in function `romfs_dev_strnlen': storage.c:(.text+0x128): undefined reference to `__brelse' arm-linux-gnueabi-ld: storage.c:(.text+0x16c): undefined reference to `__bread_gfp' arm-linux-gnueabi-ld: fs/romfs/storage.o: in function `romfs_dev_strcmp': storage.c:(.text+0x22c): undefined reference to `__bread_gfp' arm-linux-gnueabi-ld: storage.c:(.text+0x27c): undefined reference to `__brelse' arm-linux-gnueabi-ld: storage.c:(.text+0x2a8): undefined reference to `__bread_gfp' arm-linux-gnueabi-ld: storage.c:(.text+0x2bc): undefined reference to `__brelse' arm-linux-gnueabi-ld: storage.c:(.text+0x2d4): undefined reference to `__brelse' arm-linux-gnueabi-ld: storage.c:(.text+0x2f4): undefined reference to `__brelse' arm-linux-gnueabi-ld: storage.c:(.text+0x304): undefined reference to `__brelse' The reason for the problem is that the commit "925c86a1" ("fs: add CONFIG_BUFFER_HEAD") has added a new config "CONFIG_BUFFER_HEAD" that controls building the buffer_head code, and romfs needs to use the buffer_head API, but no corresponding config has beed added. Select the config "CONFIG_BUFFER_HEAD" in romfs Kconfig to resolve the problem. Fixes: 925c86a1 ("fs: add CONFIG_BUFFER_HEAD") Reported-by:
Luis Chamberlain <mcgrof@kernel.org> Tested-by:
-
- 02 Aug, 2023 6 commits
-
-
Christoph Hellwig authored
Add a new config option that controls building the buffer_head code, and select it from all file systems and stacking drivers that need it. For the block device nodes and alternative iomap based buffered I/O path is provided when buffer_head support is not enabled, and iomap needs a a small tweak to define the IOMAP_F_BUFFER_HEAD flag to 0 to not call into the buffer_head code when it doesn't exist. Otherwise this is just Kconfig and ifdef changes. Signed-off-by:
-
Christoph Hellwig authored
Use iomap in buffer_head compat mode to write to block devices. Signed-off-by:
Pankaj Raghav <p.raghav@samsung.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230801172201.1923299-6-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
Direct I/O on block devices now nevers goes through aops->direct_IO. Stop setting it and set the FMODE_CAN_ODIRECT in ->open instead. Signed-off-by:
-
Christoph Hellwig authored
Open code __generic_file_write_iter to remove the indirect call into ->direct_IO and to prepare using the iomap based write code. Signed-off-by:
-
Christoph Hellwig authored
block_page_mkwrite_return is neither block nor mkwrite specific, and should not be under CONFIG_BLOCK. Move it to mm.h and rename it to vmf_fs_error. Signed-off-by:
-
Christoph Hellwig authored
Fold emergency_thaw_bdev into it's only caller, to prepare for buffer.c to be built only when buffer_head support is enabled. Signed-off-by:
-
- 29 Jul, 2023 1 commit
-
-
Jens Axboe authored
Merge tag 'md-next-20230729' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.6/block Pull MD updates from Song: "1. Deprecate bitmap file support, by Christoph Hellwig; 2. Fix deadlock with md sync thread, by Yu Kuai; 3. Refactor md io accounting, by Yu Kuai; 4. Various non-urgent fixes by Li Nan, Yu Kuai, and Jack Wang." * tag 'md-next-20230729' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: (36 commits) md/md-bitmap: hold 'reconfig_mutex' in backlog_store() md/md-bitmap: remove unnecessary local variable in backlog_store() md/raid10: use dereference_rdev_and_rrdev() to get devices md/raid10: factor out dereference_rdev_and_rrdev() md/raid10: check replacement and rdev to prevent submit the same io twice md/raid1: Avoid lock contention from wake_up() md: restore 'noio_flag' for the last mddev_resume() md: don't quiesce in mddev_suspend() md: remove redundant check in fix_read_error() md/raid10: optimize fix_read_error md/raid1: prioritize adding disk to 'removed' mirror md/md-faulty: enable io accounting md/md-linear: enable io accounting md/md-multipath: enable io accounting md/raid10: switch to use md_account_bio() for io accounting md/raid1: switch to use md_account_bio() for io accounting raid5: fix missing io accounting in raid5_align_endio() md: also clone new io if io accounting is disabled md: move initialization and destruction of 'io_acct_set' to md.c md: deprecate bitmap file support ...
-
- 27 Jul, 2023 15 commits
-
-
Yu Kuai authored
Several reasons why 'reconfig_mutex' should be held: 1) rdev_for_each() is not safe to be called without the lock, because rdev can be removed concurrently. 2) mddev_destroy_serial_pool() and mddev_create_serial_pool() should not be called concurrently. 3) mddev_suspend() from mddev_destroy/create_serial_pool() should be protected by the lock. Fixes: 10c92fca ("md-bitmap: create and destroy wb_info_pool with the change of backlog") Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20230706083727.608914-3-yukuai1@huaweicloud.comSigned-off-by:
Song Liu <song@kernel.org>
-
Yu Kuai authored
Local variable is definied first in the beginning of backlog_store(), there is no need to define it again. Fixes: 8c13ab11 ("md/bitmap: don't set max_write_behind if there is no write mostly device") Signed-off-by:
-
Li Nan authored
Commit 2ae6aaf7 ("md/raid10: fix io loss while replacement replace rdev") reads replacement first to prevent io loss. However, there are same issue in wait_blocked_dev() and raid10_handle_discard(), too. Fix it by using dereference_rdev_and_rrdev() to get devices. Fixes: d30588b2 ("md/raid10: improve raid10 discard request") Fixes: f2e7e269 ("md/raid10: pull the code that wait for blocked dev into one function") Signed-off-by:
Li Nan <linan122@huawei.com> Link: https://lore.kernel.org/r/20230701080529.2684932-4-linan666@huaweicloud.comSigned-off-by:
-
Li Nan authored
Factor out a helper to get 'rdev' and 'replacement' from config->mirrors. Just to make code cleaner and prepare to fix the bug of io loss while 'replacement' replace 'rdev'. There is no functional change. Signed-off-by:
-
Li Nan authored
After commit 4ca40c2c ("md/raid10: Allow replacement device to be replace old drive."), 'rdev' and 'replacement' could appear to be identical. There are already checks for that in wait_blocked_dev() and raid10_write_request(). Add check for raid10_handle_discard() now. Signed-off-by:
-
Jack Wang authored
wake_up is called unconditionally in a few paths such as make_request(), which cause lock contention under high concurrency workload like below raid1_end_write_request wake_up __wake_up_common_lock spin_lock_irqsave Improve performance by only call wake_up() if waitqueue is not empty Fio test script: [global] name=random reads and writes ioengine=libaio direct=1 readwrite=randrw rwmixread=70 iodepth=64 buffered=0 filename=/dev/md0 size=1G runtime=30 time_based randrepeat=0 norandommap refill_buffers ramp_time=10 bs=4k numjobs=400 group_reporting=1 [job1] Test result with 2 ramdisk in raid1 on a Intel Broadwell 56 cores server. Before this patch With this patch READ BW=4621MB/s BW=7337MB/s WRITE BW=1980MB/s BW=3144MB/s The patch is inspired by Yu Kuai's change for raid10: https://lore.kernel.org/r/20230621105728.1268542-1-yukuai1@huaweicloud.com Cc: Yu Kuai <yukuai3@huawei.com> Signed-off-by: -
Yu Kuai authored
memalloc_noio_save() is called for the first mddev_suspend(), and repeated mddev_suspend() only increase 'suspended'. However, memalloc_noio_restore() is also called for the first mddev_resume(), which means that memory reclaim will be enabled before the last mddev_resume() is called, while the array is still suspended. Fix this problem by restore 'noio_flag' for the last mddev_resume(). Fixes: 78f57ef9 ("md: use memalloc scope APIs in mddev_suspend()/mddev_resume()") Signed-off-by:
-
Yu Kuai authored
Some levels doesn't implement "pers->quiesce", for example raid0_quiesce() is empty, and now that all levels will drop 'active_io' until io is done, wait for 'active_io' to be 0 is enough to make sure all normal io is done, and percpu_ref_kill() for 'active_io' will make sure no new normal io can be dispatched. There is no need to call "pers->quiesce" anymore from mddev_suspend(). Signed-off-by:
-
Li Nan authored
In fix_read_error(), 'success' will be checked immediately after assigning it, if it is set to 1 then the loop will break. Checking it again in condition of loop is redundant. Clean it up. Signed-off-by:
-
Li Nan authored
We dereference r10_bio->read_slot too many times in fix_read_error(). Optimize it by using a variable to store read_slot. Signed-off-by:
-
Li Nan authored
New disk should be added to "removed" position first instead of to be a replacement. Commit 6090368a ("md/raid10: prioritize adding disk to 'removed' mirror") has fixed this issue for raid10. Fix it for raid1 now. Signed-off-by:
-
Yu Kuai authored
use md_account_bio() to enable io accounting, also make sure mddev_suspend() will wait for all io to be done. Signed-off-by:
Xiao Ni <xni@redhat.com> Signed-off-by:
-
Yu Kuai authored
use md_account_bio() to enable io accounting, also make sure mddev_suspend() will wait for all io to be done. Signed-off-by:
-
Yu Kuai authored
use md_account_bio() to enable io accounting, also make sure mddev_suspend() will wait for all io to be done. Signed-off-by:
-
Yu Kuai authored
Make sure that 'active_io' will represent inflight io instead of io that is dispatching, and io accounting from all levels will be consistent. Signed-off-by:
-
