- 07 Nov, 2016 20 commits
-
-
Paolo Abeni authored
A new argument is added to __skb_recv_datagram to provide an explicit skb destructor, invoked under the receive queue lock. The UDP protocol uses such argument to perform memory reclaiming on dequeue, so that the UDP protocol does not set anymore skb->desctructor. Instead explicit memory reclaiming is performed at close() time and when skbs are removed from the receive queue. The in kernel UDP protocol users now need to call a skb_recv_udp() variant instead of skb_recv_datagram() to properly perform memory accounting on dequeue. Overall, this allows acquiring only once the receive queue lock on dequeue. Tested using pktgen with random src port, 64 bytes packet, wire-speed on a 10G link as sender and udp_sink as the receiver, using an l4 tuple rxhash to stress the contention, and one or more udp_sink instances with reuseport. nr sinks vanilla patched 1 440 560 3 2150 2300 6 3650 3800 9 4450 4600 12 6250 6450 v1 -> v2: - do rmem and allocated memory scheduling under the receive lock - do bulk scheduling in first_packet_length() and in udp_destruct_sock() - avoid the typdef for the dequeue callback Suggested-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
So that we can use it even after orphaining the skbuff. Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
David Ahern authored
Binding a raw socket to a local address fails if the socket is bound to an L3 domain: $ vrf-test -s -l 10.100.1.2 -R -I red error binding socket: 99: Cannot assign requested address Update raw_bind to look consider if sk_bound_dev_if is bound to an L3 domain and use inet_addr_type_table to lookup the address. Signed-off-by:David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
David S. Miller authored
Jon Mason says: ==================== add NS2 support to bgmac Changes in v6: * Use a common bgmac_phy_connect_direct (per Rafal Milecki) * Rebased on latest net-next * Added Reviewed-by to the relevant patches Changes in v5: * Change a pr_err to netdev_err (per Scott Branden) * Reword the lane swap binding documentation (per Andrew Lunn) Changes in v4: * Actually send out the lane swap binding doc patch (Per Scott Branden) * Remove unused #define (Per Andrew Lunn) Changes in v3: * Clean-up the bgmac DT binding doc (per Rob Herring) * Document the lane swap binding and make it generic (Per Andrew Lunn) Changes in v2: * Remove the PHY power-on (per Andrew Lunn) * Misc PHY clean-ups regarding comments and #defines (per Andrew Lunn) This results on none of the original PHY code from Vikas being present. So, I'm removing him as an author and giving him "Inspired-by" credit. * Move PHY lane swapping to PHY driver (per Andrew Lunn and Florian Fainelli) * Remove bgmac sleep (per Florian Fainelli) * Re-add bgmac chip reset (per Florian Fainelli and Ray Jui) * Rebased on latest net-next * Added patch for bcm54xx_auxctl_read, which is used in the BCM54810 ==================== Signed-off-by: -
Jon Mason authored
Add support for the AMAC ethernet to the Broadcom Northstar2 SoC device tree Signed-off-by:
Jon Mason <jon.mason@broadcom.com> Signed-off-by:
-
Jon Mason authored
Add support for the variant of amac hardware present in the Broadcom Northstar2 based SoCs. Northstar2 requires an additional register to be configured with the port speed/duplexity (NICPM). This can be added to the link callback to hide it from the instances that do not use this. Also, clearing of the pending interrupts on init is required due to observed issues on some platforms. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
-
Jon Mason authored
Change the bgmac driver to allow for phy's defined by the device tree Signed-off-by:
-
Jon Mason authored
Clean-up the documentation to the bgmac-amac driver, per suggestion by Rob Herring, and add details for NS2 support. Signed-off-by:
-
Jon Mason authored
The BCM54810 PHY requires some semi-unique configuration, which results in some additional configuration in addition to the standard config. Also, some users of the BCM54810 require the PHY lanes to be swapped. Since there is no way to detect this, add a device tree query to see if it is applicable. Inspired-by:
Vikas Soni <vsoni@broadcom.com> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Jon Mason authored
Add the documentation for PHY lane swapping. This is a boolean entry to notify the phy device drivers that the TX/RX lanes need to be swapped. Signed-off-by:
-
Jon Mason authored
Add a helper function to read the AUXCTL register for the BCM54xx. This mirrors the bcm54xx_auxctl_write function already present in the code. Signed-off-by:
-
David S. Miller authored
Joachim Eastwood says: ==================== stmmac: dwmac-sti refactor+cleanup This patch set aims to remove the init/exit callbacks from the dwmac-sti driver and instead use standard PM callbacks. Doing this will also allow us to cleanup the driver. Eventually the init/exit callbacks will be deprecated and removed from all drivers dwmac-* except for dwmac-generic. Drivers will be refactored to use standard PM and remove callbacks. ==================== Signed-off-by: -
Joachim Eastwood authored
The dev member of struct sti_dwmac is not used anywhere in the driver so lets just remove it. Signed-off-by:
Joachim Eastwood <manabian@gmail.com> Acked-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Tested-by:
-
Joachim Eastwood authored
Rename sti_dwmac_init to sti_dwmac_set_mode which is a better description for what it really does. Signed-off-by:
-
Joachim Eastwood authored
Add clock error handling to probe and in the process move clock enabling out of sti_dwmac_init() to make this easier. Signed-off-by:
-
Joachim Eastwood authored
The sti_dwmac_init() function is called both from probe and resume. Since DT properties doesn't change between suspend/resume cycles move parsing of this parameter into sti_dwmac_parse_data() where it belongs. Signed-off-by:
-
Joachim Eastwood authored
Implement PM callbacks and driver remove in the driver instead of relying on the init/exit hooks in stmmac_platform. This gives the driver more flexibility in how the code is organized. Eventually the init/exit callbacks will be deprecated in favor of the standard PM callbacks and driver remove function. Signed-off-by:
-
Joachim Eastwood authored
Since sti_dwmac_parse_data() sets dwmac->clk to NULL if not clock was provided in DT and NULL is a valid clock there is no need to check for NULL before using this clock. Signed-off-by:
-
Joachim Eastwood authored
Since dwmac-sti is a DT only driver checking for OF node is not necessary. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2016-11-04 This series contains updates to ixgbe and ixgbevf only. Don does cleanup and configuration for our X553 devices, related to LED, auto-negotiation, flow control and SFP+ setup and config. Adds the (not secret) sauce for B0 hardware for X553 hardware. Emil provides several fixes, first replaces the driver specific MDIO defines for the more preferred equivalent kernel ones. Provides a fix for auto-negotiaion status, by reading a PHY register twice. Introduces ixgbe_link_operations structure to allow X550EM_a to override the methods for MDIO access while X550EM_x provides methods to use I2C combined access. Mark fixes an issue where the driver was crashing when msix_entires were not there because they were freed by a previous suspend or remove. Sowmini Varadhan fixes an issue where an incorrect check for IPPROTO_UDP in ixgbe_atr(). Then makes sure that the network and transport headers in the paged data are available in the headlen bytes to calculate the l4_proto. ==================== Signed-off-by:
-
- 05 Nov, 2016 16 commits
-
-
Wei Yongjun authored
Remove including <generated/utsrelease.h> that don't need it. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Mark Rustad authored
The msix_entries memory can be freed by a previous suspend or remove, so don't crash on close when it isn't there. Also only clear the interrupts when the interface is up, because there aren't any when it is not up. Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Tested-by:
Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Sowmini Varadhan authored
For some Tx paths (e.g., tpacket_snd()), ixgbe_atr may be passed down an sk_buff that has the network and transport header in the paged data, so it needs to make sure these headers are available in the headlen bytes to calculate the l4_proto. This patch expect that network and transport headers are already available in the non-paged header dat. The assumption is that the caller has set this up if l4_proto based Tx steering is desired. Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Reviewed-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
-
Sowmini Varadhan authored
Commit 9f12df90 ("ixgbe: Store VXLAN port number in network order") incorrectly checks for hdr.ipv4->protocol != IPPROTO_UDP in ixgbe_atr(). This check should be for "==" instead. Signed-off-by:
-
Don Skidmore authored
We were using an old Alpha version of the X550 phy ID. This was leading to unnecessary queries of the PHY. I removed the old ID (which shouldn't be on any HW) and add the two that are. Signed-off-by:
Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by:
-
Don Skidmore authored
This patch add X553 FW ALEF support for B0. ALEF is the new unified FW. This contains updated register defines for ALEF speed configuration. Likewise it also removes the AN_CNTL_8 usage from the native SFI flow as it is no longer supported by FW. Signed-off-by:
-
Emil Tantilov authored
Fix an issue where set_phy_power was NULL for X550 copper devices because get_invariants was called before hw->device_id was set. Signed-off-by:
Emil Tantilov <emil.s.tantilov@intel.com> Tested-by:
-
Emil Tantilov authored
Introduce ixgbe_link_operations struct with the following changes: read_i2c_combined => read_link read_i2c_combined_unlocked => read_link_unlocked write_i2c_combined => write_link write_i2c_combined_unlocked => write_link_unlocked This will allow X550EM_a to override these methods for MDIO access while X550EM_x provides methods to use I2C combined access. This also adds a new structure, ixgbe_link_info, to hold information about the link. Initially this is just method pointers and a bus address. The functions involved in combined I2C accesses were moved from ixgbe_phy.c to ixgbe_x550.c. The underlying functions that carry out the combined I2C accesses were left in ixgbe_phy.c because they share some functions with other I2C methods. v2 - set hw->link.ops in probe. v3 - check ii->link_ops before setting it since we don't have it for all devices. Signed-off-by:
-
Emil Tantilov authored
Remove SFP ixfi code since there is no HW that currently supports it. Signed-off-by:
-
Mark Rustad authored
The msix_entries memory can be freed by a previous suspend or remove, so don't crash on close when it isn't there. Signed-off-by:
-
Don Skidmore authored
This patch adds X553 flow control auto negotiation for fiber and backplain. To enable this new function pointers were added as well as creating a function to dynamically set function pointer we can't define only on MAC type. Signed-off-by:
-
Emil Tantilov authored
Read the PHY register twice in order to get the correct value for autoneg_status. Signed-off-by:
-
Emil Tantilov authored
Replace some ixgbe specific MDIO defines with their equivalent from the kernel. Signed-off-by:
-
Don Skidmore authored
This patch updates ixgbe_setup_phy_link_generic to set/unset auto-negotiation for all speeds. This ensures that unsupported speeds are unset. This is necessary since the PHY NVM may advertise unsupported speeds. Signed-off-by:
-
Don Skidmore authored
This patch adds support to get the LED link active via the LEDCTL register. If the LEDCTL register does not have LED link active (LED mode field = 0x0100) set then default LED link active returned. Signed-off-by:
-
Don Skidmore authored
X553 doesn't need all the initialization that X552 did for iXFI. This patch will allow native SPI SFP+ to work with X553 devices. Future patches will add additional configuration as needed. Signed-off-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
-
- 04 Nov, 2016 4 commits
-
-
David S. Miller authored
Jakub Kicinski says: ==================== ring reconfiguration and XDP support This set adds support for ethtool channel API and XDP. I kick off with ethtool get_channels() implementation. set_channels() needs some preparations to get right. I follow the prepare/commit paradigm and allocate all resources before stopping the device. It has already been done for ndo_change_mtu and ethtool set_ringparam(), it makes sense now to consolidate all the required logic in one place. XDP support requires splitting TX rings into two classes - for the stack and for XDP. The ring structures are identical. The differences are in how they are connected to IRQ vector structs and how the completion/cleanup works. When XDP is enabled I switch from the frag allocator to page-per-packet and map buffers BIDIRECTIONALly. Last but not least XDP offload is added (the patch just takes care of the small formal differences between cls_bpf and XDP). There is a tiny & trivial DebugFS patch in the mix, I hope it can be taken via net-next provided we have the right Acks. Resending with improved commit message and CCing more people on patch 10. ==================== Signed-off-by: -
Jakub Kicinski authored
Most infrastructure can be reused, provide separate handling of context offsets and exit codes. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
nfp_net_bpf_offload() takes all .setup_tc() parameters but it doesn't use them at the moment. Remove unnecessary ones to make it possible for XDP to reuse this function. Signed-off-by:
-
Jakub Kicinski authored
Add XDP support. Separate stack's and XDP's TX rings logically. Add functions for handling XDP_TX and cleanup of XDP's TX rings. For XDP allocate all RX buffers as separate pages and map them with DMA_BIDIRECTIONAL. Signed-off-by:
-
