This patch fixes a bug introduced by commit 977dcfdc ("USB: OHCI:
don't lose track of EDs when a controller dies").  The commit changed
ed_state from ED_UNLINK to ED_IDLE too early, before finish_urb() had
been called.  The user-visible consequence is that the driver
occasionally crashes or locks up when an URB is submitted while
another URB for the same endpoint is being unlinked.

This patch moves the ED state change later, to the right place.  The
drawback is that now we may unnecessarily execute some instructions
multiple times when a controller dies.  Since controllers dying is an
exceptional occurrence, a little wasted time won't matter.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Heiko Przybyl <lil_tux@web.de>
Tested-by: Heiko Przybyl <lil_tux@web.de>
Fixes: 977dcfdc
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 25cd2882 ("usb/xhci: Change how we indicate a host supports
Link PM.") removed the code to set lpm_capable for USB 3.0 super-speed
root hub. The intention of that change was to avoid touching usb core
internal field, a.k.a. lpm_capable, and let usb core to set it by
checking U1 and U2 exit latency values in the descriptor.

Usb core checks and sets lpm_capable in hub_port_init(). Unfortunately,
root hub is a special usb device as it has no parent. Hub_port_init()
will never be called for a root hub device. That means lpm_capable will
by no means be set for the root hub. As the result, lpm isn't functional
at all in Linux kernel.

This patch add the code to check and set lpm_capable when registering a
root hub device. It could be back-ported to kernels as old as v3.15,
that contains the Commit 25cd2882 ("usb/xhci: Change how we indicate
a host supports Link PM.").

Cc: stable@vger.kernel.org # 3.15
Reported-by: Kevin Strasser <kevin.strasser@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'phy-for-4.2-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus

Kishon writes:

phy: for 4.2-rc

*) Fix PIPE3 PM so that all its users (PCIe, SATA, USB) can
   idle and resume
*) Fix a compiler error in pxa
*) Fix pll divider values in berlin-usb phy driver
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Port link change with port in resume state should not be
reported to usbcore, as this is an internal state to be
handled by xhci driver. Reporting PLC to usbcore may
cause usbcore clearing PLC first and port change event irq
won't be generated.

Cc: <stable@vger.kernel.org>
Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When the link is just waken, it's in Resume state, and driver sets PLS to
U0. This refers to Phase 1. Phase 2 refers to when the link has completed
the transition from Resume state to U0.

With the fix of xhci: report U3 when link is in resume state, it also
exposes an issue that usb3 roothub and controller can suspend right
after phase 1, and this causes a hard hang in controller.

To fix the issue, we need to prevent usb3 bus suspend if any port is
resuming in phase 1.

[merge separate USB2 and USB3 port resume checking to one -Mathias]
Cc: <stable@vger.kernel.org>
Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci_hub_report_usb3_link_state() returns pls as U0 when the link
is in resume state, and this causes usb core to think the link is in
U0 while actually it's in resume state. When usb core transfers
control request on the link, it fails with TRB error as the link
is not ready for transfer.

To fix the issue, report U3 when the link is in resume state, thus
usb core knows the link it's not ready for transfer.

Cc: <stable@vger.kernel.org>
Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When resetting a device the number of active TTs may need to be
corrected by xhci_update_tt_active_eps, but the number of old active
endpoints supplied to it was always zero, so the number of TTs and the
bandwidth reserved for them was not updated, and could rise
unnecessarily.

This affected systems using Intel's Patherpoint chipset, which rely on
software bandwidth checking.  For example, a Lenovo X230 would lose the
ability to use ports on the docking station after enough suspend/resume
cycles because the bandwidth calculated would rise with every cycle when
a suitable device is attached.

The correct number of active endpoints is calculated in the same way as
in xhci_reserve_bandwidth.

Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Campbell <bacam@z273.org.uk>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virt_dev->num_cached_rings counts on freed ring and is not updated
correctly. In xhci_free_or_cache_endpoint_ring() function, the free ring
is added into cache and then num_rings_cache is incremented as below:
		virt_dev->ring_cache[rings_cached] =
			virt_dev->eps[ep_index].ring;
		virt_dev->num_rings_cached++;
here, free ring pointer is added to a current index and then
index is incremented.
So current index always points to empty location in the ring cache.
For getting available free ring, current index should be decremented
first and then corresponding ring buffer value should be taken from ring
cache.

But In function xhci_endpoint_init(), the num_rings_cached index is
accessed before decrement.
		virt_dev->eps[ep_index].new_ring =
			virt_dev->ring_cache[virt_dev->num_rings_cached];
		virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL;
		virt_dev->num_rings_cached--;
This is bug in manipulating the index of ring cache.
And it should be as below:
		virt_dev->num_rings_cached--;
		virt_dev->eps[ep_index].new_ring =
			virt_dev->ring_cache[virt_dev->num_rings_cached];
		virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL;

Cc: <stable@vger.kernel.org>
Signed-off-by: Aman Deep <aman.deep@samsung.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The xHCI in Intel CherryView / Braswell Platform requires
a driver workaround to get xHCI D3 working. Without this
workaround, xHCI might not enter D3.

Workaround is to configure SSIC PORT as "unused" before D3
entry and "used" after D3 exit. This is done through a
vendor specific register (PORT2_SSIC_CONFIG_REG2 at offset
0x883c), in xhci suspend / resume callbacks.

Verified xHCI D3 works fine in CherryView / Braswell platform.
Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Intel xhci hw that require XHCI_PME_STUCK quirk have as default disabled
xhci from going to D3 state in runtime suspend. Driver needs to verify
it can deal with the hw by calling an ACPI _DSM method to get D3 enabled.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'fixes-for-v4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

usb: fixes for v4.2-rc4

Only four fixes this time so I'll describe them all.

We have an iomen resource leak fix in mv_udc_core. This bug
exists since v3.3.

Renesas got a fix for how they use dma_map_single() with IOMMU.

The new ulpi bus got an ordering fix, so drivers don't try to
probe ahead of the bus.

And finally, we have a fix for a really old regression with
dwc3, one which could only be exposed by a recent patch from
Subbaraya. Basically, we were startving the controller of
transfer resources.
Signed-off-by: Felipe Balbi <balbi@ti.com>

This fixes an issue introduced in commit b23c8439 (usb: dwc3:
gadget: fix DEPSTARTCFG for non-EP0 EPs) that made sure we would
only use DEPSTARTCFG once per SetConfig.

The trick is that we should use one DEPSTARTCFG per SetConfig *OR*
SetInterface. SetInterface was completely missed from the original
patch.

This problem became aparent after commit 76e838c9 (usb: dwc3:
gadget: return error if command sent to DEPCMD register fails)
added checking of the return status of device endpoint commands.

'Set Endpoint Transfer Resource' command was caught failing
occasionally. This is because the Transfer Resource
Index was not getting reset during a SET_INTERFACE request.

Finally, to fix the issue, was we have to do is make sure that
our start_config_issued flag gets reset whenever we receive a
SetInterface request.

To verify the problem (and its fix), all we have to do is run
test 9 from testusb with 'testusb -t 9 -s 2048 -a -c 5000'.
Tested-by: Huang Rui <ray.huang@amd.com>
Tested-by: Subbaraya Sundeep Bhatta <subbaraya.sundeep.bhatta@xilinx.com>
Fixes: b23c8439 (usb: dwc3: gadget: fix DEPSTARTCFG for non-EP0 EPs)
Cc: <stable@vger.kernel.org> # v3.2+
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

The dma_map_single and dma_unmap_single should set "gadget->dev.parent"
instead of "&gadget->dev" in the first argument because the parent has
a udc controller's device pointer.
Otherwise, iommu functions are not called in ARM environment.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

There was an omission in transition to devm_xxx resource handling.
iounmap(udc->phy_regs) were removed, but ioremap() was left
without devm_.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 3517c31a ("usb: gadget: mv_udc: use devm_xxx for probe")
Signed-off-by: Felipe Balbi <balbi@ti.com>

Phy drivers and the ulpi interface providers depend on the
registration of the ulpi bus.  Ulpi registers the bus in
module_init(). This could cause unnecessary bus users'
probe delays. i.e. unnecessary -EPROBE_DEFER happening on
ulpi_drivers in case they're registered before ulpi bus
itself.
Reported-by: Zhuo Qiuxu <qiuxu.zhuo@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

Pull SCSI fixes from James Bottomley:
 "Two fairly simple fixes: one is a change that causes us to have a very
  low queue depth leading to performance issues and the other is a null
  deref occasionally in tapes thanks to use after put"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: fix host max depth checking for the 'queue_depth' sysfs interface
  st: null pointer dereference panic caused by use after kref_put by st_open

Pull MIPS fixes from Ralf Baechle:
 "Another round of MIPS fixes for 4.2.

  Things are looking quite decent at this stage but the recent work on
  the FPU support took its toll:

   - fix an incorrect overly restrictive ifdef

   - select O32 64-bit FP support for O32 binary compatibility

   - remove workarounds for Sibyte SB1250 Pass1 parts.  There are rare
     fixing the workarounds is not worth the effort.

   - patch up an outdated and now incorrect comment"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: fpu.h: Allow 64-bit FPU on a 64-bit MIPS R6 CPU
  MIPS: SB1: Remove support for Pass 1 parts.
  MIPS: Require O32 FP64 support for MIPS64 with O32 compat
  MIPS: asm-offset.c: Patch up various comments refering to the old filename.

Pull parisc fix from Helge Deller:
 "A memory leak fix from Christophe Jaillet which was introduced with
  kernel 4.0 and which leads to kernel crashes on parisc after 1-3 days"

* 'parisc-4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: mm: Fix a memory leak related to pmd not attached to the pgd

Pull ARM SoC fixes from Olof Johansson:
 "By far most of the fixes here are updates to DTS files to deal with
  some mostly minor bugs.

  There's also a fix to deal with non-PM kernel configs on i.MX, a
  regression fix for ethernet on PXA platforms and a dependency fix for
  OMAP"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: keystone: dts: rename pcie nodes to help override status
  ARM: keystone: dts: fix dt bindings for PCIe
  ARM: pxa: fix dm9000 platform data regression
  ARM: dts: Correct audio input route & set mic bias for am335x-pepper
  ARM: OMAP2+: Add HAVE_ARM_SCU for AM43XX
  MAINTAINERS: digicolor: add dts files
  ARM: ux500: fix MMC/SD card regression
  ARM: ux500: define serial port aliases
  ARM: dts: OMAP5: Add #iommu-cells property to IOMMUs
  ARM: dts: OMAP4: Add #iommu-cells property to IOMMUs
  ARM: dts: Fix frequency scaling on Gumstix Pepper
  ARM: dts: configure regulators for Gumstix Pepper
  ARM: dts: omap3: overo: Update LCD panel names
  ARM: dts: cros-ec-keyboard: Add support for some Japanese keys
  ARM: imx6: gpc: always enable PU domain if CONFIG_PM is not set
  ARM: dts: imx53-qsb: fix TVE entry
  ARM: dts: mx23: fix iio-hwmon support
  ARM: dts: imx27: Adjust the GPT compatible string
  ARM: socfpga: dts: Fix entries order
  ARM: socfpga: dts: Fix adxl34x formating and compatible string

Commit 6134d949 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6")
added support for 64-bit FPU on a 32-bit MIPS R6 processor but it missed
the 64-bit CPU case leading to FPU failures when requesting FR=1 mode
(which is always the case for MIPS R6 userland) when running a 32-bit
kernel on a 64-bit CPU. We also fix the MIPS R2 case.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Fixes: 6134d949 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6")
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: <stable@vger.kernel.org> # 4.0+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10734/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Commit 0e0da48d ("parisc: mm: don't count preallocated pmds")
introduced a memory leak.

After this commit, the 'return' statement in pmd_free is executed in all
cases. Even for pmd that are not attached to the pgd.  So 'free_pages'
can never be called anymore, leading to a memory leak.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org  # v4.0+
Signed-off-by: Helge Deller <deller@gmx.de>

Merge "pxa fixes for v4.2" from Robert Jarzmik:

ARM: pxa: fixes for v4.2-rc2

This single fix reenables ethernet cards for several pxa boards,
broken by regulator addition to dm9000 driver.

* tag 'pxa-fixes-v4.2-rc2' of https://github.com/rjarzmik/linux:
  ARM: pxa: fix dm9000 platform data regression

Pull ARM fixes from Russell King:
 "A small set of ARM fixes for -rc3, most of them not far off
  one-liners, with the exception of fixing the V7 cache invalidation for
  incoming SMP processors which was causing problems for SoCFPGA
  devices"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: fix __virt_to_idmap build error on !MMU
  ARM: invalidate L1 before enabling coherency
  ARM: 8404/1: dma-mapping: fix off-by-one error in bitmap size check
  ARM: 8402/1: perf: Don't use of_node after putting it
  ARM: 8400/1: use virt_to_idmap to get phys_reset address

Pull x86 fixes from Ingo Molnar:
 "Two families of fixes:

   - Fix an FPU context related boot crash on newer x86 hardware with
     larger context sizes than what most people test.  To fix this
     without ugly kludges or extensive reverts we had to touch core task
     allocator, to allow x86 to determine the task size dynamically, at
     boot time.

     I've tested it on a number of x86 platforms, and I cross-built it
     to a handful of architectures:

                                        (warns)               (warns)
       testing     x86-64:  -git:  pass (    0),  -tip:  pass (    0)
       testing     x86-32:  -git:  pass (    0),  -tip:  pass (    0)
       testing        arm:  -git:  pass ( 1359),  -tip:  pass ( 1359)
       testing       cris:  -git:  pass ( 1031),  -tip:  pass ( 1031)
       testing       m32r:  -git:  pass ( 1135),  -tip:  pass ( 1135)
       testing       m68k:  -git:  pass ( 1471),  -tip:  pass ( 1471)
       testing       mips:  -git:  pass ( 1162),  -tip:  pass ( 1162)
       testing    mn10300:  -git:  pass ( 1058),  -tip:  pass ( 1058)
       testing     parisc:  -git:  pass ( 1846),  -tip:  pass ( 1846)
       testing      sparc:  -git:  pass ( 1185),  -tip:  pass ( 1185)

     ... so I hope the cross-arch impact 'none', as intended.

     (by Dave Hansen)

   - Fix various NMI handling related bugs unearthed by the big asm code
     rewrite and generally make the NMI code more robust and more
     maintainable while at it.  These changes are a bit late in the
     cycle, I hope they are still acceptable.

     (by Andy Lutomirski)"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86
  x86/fpu, sched: Dynamically allocate 'struct fpu'
  x86/entry/64, x86/nmi/64: Add CONFIG_DEBUG_ENTRY NMI testing code
  x86/nmi/64: Make the "NMI executing" variable more consistent
  x86/nmi/64: Minor asm simplification
  x86/nmi/64: Use DF to avoid userspace RSP confusing nested NMI detection
  x86/nmi/64: Reorder nested NMI checks
  x86/nmi/64: Improve nested NMI comments
  x86/nmi/64: Switch stacks on userspace NMI entry
  x86/nmi/64: Remove asm code that saves CR2
  x86/nmi: Enable nested do_nmi() handling for 64-bit kernels

Pull timer fix from Ingo Molnar:
 "Fix for a misplaced export that can cause build failures in certain
  (rare) Kconfig situations"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick: Move the export of tick_broadcast_oneshot_control to the proper place

Pull scheduler fix from Ingo Molnar:
 "A oneliner rq throttling fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Test list head instead of list entry in throttle_cfs_rq()

Pull perf fixes from Ingo Molnar:
 "Mostly tooling fixes, plus a static key fix fixing /sys/devices/cpu/rdpmc"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Really allow to specify custom CC, AR or LD
  perf auxtrace: Fix misplaced check for HAVE_SYNC_COMPARE_AND_SWAP_SUPPORT
  perf hists browser: Take the --comm, --dsos, etc filters into account
  perf symbols: Store if there is a filter in place
  x86, perf: Fix static_key bug in load_mm_cr4()
  tools: Copy lib/hweight.c from the kernel sources
  perf tools: Fix the detached tarball wrt rbtree copy
  perf thread_map: Fix the sizeof() calculation for map entries
  tools lib: Improve clean target
  perf stat: Fix shadow declaration of close
  perf tools: Fix lockup using 32-bit compat vdso

Pull irq fixes from Ingo Molnar:
 "Misc irq fixes:

   - two driver fixes
   - a Xen regression fix
   - a nested irq thread crash fix"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gicv3-its: Fix mapping of LPIs to collections
  genirq: Prevent resend to interrupts marked IRQ_NESTED_THREAD
  genirq: Revert sparse irq locking around __cpu_up() and move it to x86 for now
  gpio/davinci: Fix race in installing chained irq handler

Merge fixes from Andrew Morton:
 "25 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (25 commits)
  lib/decompress: set the compressor name to NULL on error
  mm/cma_debug: correct size input to bitmap function
  mm/cma_debug: fix debugging alloc/free interface
  mm/page_owner: set correct gfp_mask on page_owner
  mm/page_owner: fix possible access violation
  fsnotify: fix oops in fsnotify_clear_marks_by_group_flags()
  /proc/$PID/cmdline: fixup empty ARGV case
  dma-debug: skip debug_dma_assert_idle() when disabled
  hexdump: fix for non-aligned buffers
  checkpatch: fix long line messages about patch context
  mm: clean up per architecture MM hook header files
  MAINTAINERS: uclinux-h8-devel is moderated for non-subscribers
  mailmap: update Sudeep Holla's email id
  Update Viresh Kumar's email address
  mm, meminit: suppress unused memory variable warning
  configfs: fix kernel infoleak through user-controlled format string
  include, lib: add __printf attributes to several function prototypes
  s390/hugetlb: add hugepages_supported define
  mm: hugetlb: allow hugepages_supported to be architecture specific
  revert "s390/mm: make hugepages_supported a boot time decision"
  ...

Pull btrfs fixes from Chris Mason:
 "These are all from Filipe, and cover a few problems we've had reported
  on the list recently (along with ones he found on his own)"

* 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix file corruption after cloning inline extents
  Btrfs: fix order by which delayed references are run
  Btrfs: fix list transaction->pending_ordered corruption
  Btrfs: fix memory leak in the extent_same ioctl
  Btrfs: fix shrinking truncate when the no_holes feature is enabled

Pull rtc fixes from Alexandre Belloni:
 "A few fixes for the RTC susbsystem for 4.2.

  The mt6397 driver was introduce in 4.2 so it is worth fixing before
  the final release.  I though the compilation warning for armada38x was
  fixed by akpm in commit f98b733e ("rtc-armada38x.c: remove unused
  local `flags'") but he actually missed some occurrences of the
  variables.  Since I received 4 patches for that, I think we can
  include it now.

  Summary:
   - fix mt6397 wakealarm creation
   - remove a compilation warning for armada38x that was forgotten"

* tag 'rtc-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: armada38x: Remove unused variable from armada38x_rtc_set_time()
  rtc: mt6397: enable wakeup before registering rtc device

Pull device mapper fixes from Mike Snitzer:

 - revert a request-based DM core change that caused IO latency to
   increase and adversely impact both throughput and system load

 - fix for a use after free bug in DM core's device cleanup

 - a couple DM btree removal fixes (used by dm-thinp)

 - a DM thinp fix for order-5 allocation failure

 - a DM thinp fix to not degrade to read-only metadata mode when in
   out-of-data-space mode for longer than the 'no_space_timeout'

 - fix a long-standing oversight in both dm-thinp and dm-cache by now
   exporting 'needs_check' in status if it was set in metadata

 - fix an embarrassing dm-cache busy-loop that caused worker threads to
   eat cpu even if no IO was actively being issued to the cache device

* tag 'dm-4.2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache: avoid calls to prealloc_free_structs() if possible
  dm cache: avoid preallocation if no work in writeback_some_dirty_blocks()
  dm cache: do not wake_worker() in free_migration()
  dm cache: display 'needs_check' in status if it is set
  dm thin: display 'needs_check' in status if it is set
  dm thin: stay in out-of-data-space mode once no_space_timeout expires
  dm: fix use after free crash due to incorrect cleanup sequence
  Revert "dm: only run the queue on completion if congested or no requests pending"
  dm btree: silence lockdep lock inversion in dm_btree_del()
  dm thin: allocate the cell_sort_array dynamically
  dm btree remove: fix bug in redistribute3

Don't burden architectures without dynamic task_struct sizing
with the overhead of dynamic sizing.

Also optimize the x86 code a bit by caching task_struct_size.
Acked-and-Tested-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1437128892-9831-3-git-send-email-mingo@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

The FPU rewrite removed the dynamic allocations of 'struct fpu'.
But, this potentially wastes massive amounts of memory (2k per
task on systems that do not have AVX-512 for instance).

Instead of having a separate slab, this patch just appends the
space that we need to the 'task_struct' which we dynamically
allocate already.  This saves from doing an extra slab
allocation at fork().

The only real downside here is that we have to stick everything
and the end of the task_struct.  But, I think the
BUILD_BUG_ON()s I stuck in there should keep that from being too
fragile.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1437128892-9831-2-git-send-email-mingo@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Without this we end up using the previous name of the compressor in the
loop in unpack_rootfs.  For example we get errors like "compression
method gzip not configured" even when we have CONFIG_DECOMPRESS_GZIP
enabled.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In CMA, 1 bit in bitmap means 1 << order_per_bits pages so size of
bitmap is cma->count >> order_per_bits rather than just cma->count.
This patch fixes it.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Stefan Strogin <stefan.strogin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

CMA has alloc/free interface for debugging.  It is intended that
alloc/free occurs in specific CMA region, but, currently, alloc/free
interface is on root dir due to the bug so we can't select CMA region
where alloc/free happens.

This patch fixes this problem by making alloc/free interface per CMA
region.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Stefan Strogin <stefan.strogin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently, we set wrong gfp_mask to page_owner info in case of isolated
freepage by compaction and split page.  It causes incorrect mixed
pageblock report that we can get from '/proc/pagetypeinfo'.  This metric
is really useful to measure fragmentation effect so should be accurate.
This patch fixes it by setting correct information.

Without this patch, after kernel build workload is finished, number of
mixed pageblock is 112 among roughly 210 movable pageblocks.

But, with this fix, output shows that mixed pageblock is just 57.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When I tested my new patches, I found that page pointer which is used
for setting page_owner information is changed.  This is because page
pointer is used to set new migratetype in loop.  After this work, page
pointer could be out of bound.  If this wrong pointer is used for
page_owner, access violation happens.  Below is error message that I
got.

  BUG: unable to handle kernel paging request at 0000000000b00018
  IP: [<ffffffff81025f30>] save_stack_address+0x30/0x40
  PGD 1af2d067 PUD 166e0067 PMD 0
  Oops: 0002 [#1] SMP
  ...snip...
  Call Trace:
    print_context_stack+0xcf/0x100
    dump_trace+0x15f/0x320
    save_stack_trace+0x2f/0x50
    __set_page_owner+0x46/0x70
    __isolate_free_page+0x1f7/0x210
    split_free_page+0x21/0xb0
    isolate_freepages_block+0x1e2/0x410
    compaction_alloc+0x22d/0x2d0
    migrate_pages+0x289/0x8b0
    compact_zone+0x409/0x880
    compact_zone_order+0x6d/0x90
    try_to_compact_pages+0x110/0x210
    __alloc_pages_direct_compact+0x3d/0xe6
    __alloc_pages_nodemask+0x6cd/0x9a0
    alloc_pages_current+0x91/0x100
    runtest_store+0x296/0xa50
    simple_attr_write+0xbd/0xe0
    __vfs_write+0x28/0xf0
    vfs_write+0xa9/0x1b0
    SyS_write+0x46/0xb0
    system_call_fastpath+0x16/0x75

This patch fixes this error by moving up set_page_owner().
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>