- 27 Oct, 2023 3 commits
-
-
Kunwu Chan authored
There is a typo in the kernel documentation for function drm_atomic_helper_wait_for_dependencies. Fix it. Signed-off-by:
Kunwu Chan <chentao@kylinos.cn> Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231027024459.12793-1-chentao@kylinos.cn
-
Javier Martinez Canillas authored
Avoid a possible uninitialized use of the crtc_state variable in function ssd132x_primary_plane_atomic_check() and avoid the following Smatch warn: drivers/gpu/drm/solomon/ssd130x.c:921 ssd132x_primary_plane_atomic_check() error: uninitialized symbol 'crtc_state'. Fixes: fdd591e0 ("drm/ssd130x: Add support for the SSD132x OLED controller family") Reported-by:Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/dri-devel/7dd6ca45-8263-44fe-a318-2fd9d761425d@moroto.mountain/Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Acked-by:
Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231020225338.1686974-1-javierm@redhat.com
-
Javier Martinez Canillas authored
This is a leftover from when the binding schema had the compatible string property enum as a 'oneOf' child and the '-' was not removed when 'oneOf' got dropped during the binding review process. Reported-by:
Rob Herring <robh@kernel.org> Closes: https://lore.kernel.org/dri-devel/CAL_Jsq+h8DcnpKqhokQOODCc8+Qi3M0PrxRFKz_Y4v37yMJvvA@mail.gmail.com/Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Reviewed-by:
-
- 26 Oct, 2023 18 commits
-
-
Alex Deucher authored
Rather than doing this in the IP code for the SDMA paging engine, move it up to the core device level init level. This should fix the scheduler init ordering. v2: drop extra parens v3: drop SDMA helpers v4: Added a Fixes tag because amdgpu dereferences an uninitialized scheduler without this patch, and this patch fixes this. (Luben) Tested-by:Luben Tuikov <luben.tuikov@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20231025171928.3318505-1-alexander.deucher@amd.comAcked-by:
Christian König <christian.koenig@amd.com> Fixes: 56e44960 ("drm/sched: Convert the GPU scheduler to variable number of run-queues") Signed-off-by:
Luben Tuikov <ltuikov89@gmail.com>
-
Luben Tuikov authored
Update the GPU Scheduler maintainer email. Cc: Alex Deucher <Alexander.Deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: AMD Graphics <amd-gfx@lists.freedesktop.org> Cc: Direct Rendering Infrastructure - Development <dri-devel@lists.freedesktop.org> Signed-off-by:
-
Luben Tuikov authored
The GPU scheduler has now a variable number of run-queues, which are set up at drm_sched_init() time. This way, each driver announces how many run-queues it requires (supports) per each GPU scheduler it creates. Note, that run-queues correspond to scheduler "priorities", thus if the number of run-queues is set to 1 at drm_sched_init(), then that scheduler supports a single run-queue, i.e. single "priority". If a driver further sets a single entity per run-queue, then this creates a 1-to-1 correspondence between a scheduler and a scheduled entity. Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Qiang Yu <yuq825@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Danilo Krummrich <dakr@redhat.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Emma Anholt <emma@anholt.net> Cc: etnaviv@lists.freedesktop.org Cc: lima@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Helen Koike authored
DRM CI keeps track of which tests are failing, flaking or being skipped by the ci in the expectations files. Add entries for those files to the corresponding driver maintainer, so they can be notified when they change. Signed-off-by:
Helen Koike <helen.koike@collabora.com> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230919182249.153499-1-helen.koike@collabora.comSigned-off-by:
Maxime Ripard <mripard@kernel.org>
-
Helen Koike authored
Clarify the procedure developer must follow to request privileges to run tests on Freedesktop gitlab CI. This measure was added to avoid untrusted people to misuse the infrastructure. Signed-off-by:
David Heidelberg <david.heidelberg@collabora.com> Link: https://lore.kernel.org/r/20231024004525.169002-11-helen.koike@collabora.comSigned-off-by:
-
Helen Koike authored
Since the kernel doesn't use a bot like Mesa that requires tests to pass in order to merge the patches, leave it to developers and/or maintainers to manually retry. Suggested-by:
Rob Clark <robdclark@chromium.org> Signed-off-by:
-
Helen Koike authored
Export the resultant kernel config, making it easier to verify if the resultant config was correctly generated. Suggested-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
-
Helen Koike authored
With the new sharding, the default job timeout is not enough for i915 and their jobs are failing before completing. See below the current execution time: 🞋 job i915:tgl 8/8 has new status: success (37m3s) 🞋 job i915:tgl 7/8 has new status: success (19m43s) 🞋 job i915:tgl 6/8 has new status: success (21m47s) 🞋 job i915:tgl 5/8 has new status: success (18m16s) 🞋 job i915:tgl 4/8 has new status: success (21m43s) 🞋 job i915:tgl 3/8 has new status: success (17m59s) 🞋 job i915:tgl 2/8 has new status: success (22m15s) 🞋 job i915:tgl 1/8 has new status: success (18m52s) 🞋 job i915:cml 2/2 has new status: success (1h19m58s) 🞋 job i915:cml 1/2 has new status: success (55m45s) 🞋 job i915:whl 2/2 has new status: success (1h8m56s) 🞋 job i915:whl 1/2 has new status: success (54m3s) 🞋 job i915:kbl 3/3 has new status: success (37m43s) 🞋 job i915:kbl 2/3 has new status: success (36m37s) 🞋 job i915:kbl 1/3 has new status: success (34m52s) 🞋 job i915:amly 2/2 has new status: success (1h7m60s) 🞋 job i915:amly 1/2 has new status: success (59m18s) 🞋 job i915:glk 2/2 has new status: success (58m26s) 🞋 job i915:glk 1/2 has new status: success (50m23s) 🞋 job i915:apl 3/3 has new status: success (1h6m39s) 🞋 job i915:apl 2/3 has new status: success (1h4m45s) 🞋 job i915:apl 1/3 has new status: success (1h7m38s) (generated with ci_run_n_monitor.py script) The longest job is 1h19m58s, so adjust the timeout. Signed-off-by:
-
Helen Koike authored
The Collabora Lava farm added a tag called `subset-1-gfx` to half of devices the graphics community use. Lets use this tag so we don't occupy all the resources. This is particular important because Mesa3D shares the resources with DRM-CI and use them to do pre-merge tests, so it can block developers from getting their patches merged. Signed-off-by:
-
Helen Koike authored
Since the script that collected the list of the expectation files was bogus and placing test to the flakes list incorrectly, restart the expectation files with the correct script. This reduces a lot the number of tests in the flakes list. Signed-off-by:
-
Helen Koike authored
IGT has recently merged a patch that makes code_getversion test to fails if the driver isn't loaded or if it isn't the expected one defined in variable IGT_FORCE_DRIVER. Without this test, jobs were passing when the driver didn't load or probe for some reason, giving the illusion that everything was ok. Uprev IGT to include this modification and include core_getversion test in all the shards. Signed-off-by:
-
Helen Koike authored
Add helper script that given a gitlab pipeline url, analyse which are the failures and flakes and update the xfails folder accordingly. Example: Trigger a pipeline in gitlab infrastructure, than re-try a few jobs more than once (so we can have data if failures are consistent across jobs with the same name or if they are flakes) and execute: update-xfails.py https://gitlab.freedesktop.org/helen.fornazier/linux/-/pipelines/970661 git diff should show you that it updated files in xfails folder. Signed-off-by:
Vignesh Raman <vignesh.raman@collabora.com> Reviewed-by:
-
Helen Koike authored
amdgpu driver wasn't loading because amdgpu firmware wasn't being installed in the rootfs due to the wrong DEBIAN_ARCH variable. rename ARCH to DEBIAN_ARCH also, so we don't have the confusing DEBIAN_ARCH, KERNEL_ARCH and ARCH. Signed-off-by:
-
Helen Koike authored
When building containers, some rust packages were installed without locking the dependencies version, which got updated and started giving errors like: error: failed to compile `bindgen-cli v0.62.0`, intermediate artifacts can be found at `/tmp/cargo-installkNKRwf` Caused by: package `rustix v0.38.13` cannot be built because it requires rustc 1.63 or newer, while the currently active rustc version is 1.60.0 A patch to Mesa was added fixing this error, so update it. Also, commit in linux kernel 6.6 rc3 broke booting in crosvm. Mesa has upreved crosvm to fix this issue. Signed-off-by:
Jessica Zhang <quic_jesszhan@quicinc.com> Acked-by:
-
Rob Clark authored
Dependency for CONFIG_DRM_PANEL_EDP. Missing this was causing the drm driver to not probe on devices that use panel-edp. Signed-off-by:
-
Dmitry Baryshkov authored
Enable CONFIG_MSM_MMCC_8996, the multimedia clock controller on Qualcomm MSM8996 to prevent the the board from hitting the probe deferral timeouts in CI run. Signed-off-by:
-
Dmitry Baryshkov authored
In case of the merge requests it might be useful to push repo-specific fixes which have not yet propagated to the -external-fixes branch in the main UPSTREAM_REPO. For example, in case of drm/msm development, we are staging fixes locally for testing, before pushing them to the drm/drm repo. Thus, if the CI run was triggered by merge request, also pick up the -external fixes basing on the the CI_MERGE target repo / and branch. Signed-off-by:
-
Maxime Ripard authored
Flaky tests can be very difficult to reproduce after the facts, which will make it even harder to ever fix. Let's document the metadata we agreed on to provide more context to anyone trying to address these fixes. Link: https://lore.kernel.org/dri-devel/CAPj87rPbJ1V1-R7WMTHkDat2A4nwSd61Df9mdGH2PR=ZzxaU=Q@mail.gmail.com/Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
-
- 25 Oct, 2023 1 commit
-
-
Simon Ser authored
The main motivation is to repeat that dumb buffers should not be abused for anything else than basic software rendering with KMS. User-space devs are more likely to look at the IOCTL docs than to actively search for the driver-oriented "Dumb Buffer Objects" section. v2: reference DRM_CAP_DUMB_BUFFER, DRM_CAP_DUMB_PREFERRED_DEPTH and DRM_CAP_DUMB_PREFER_SHADOW (Pekka) Signed-off-by:
Simon Ser <contact@emersion.fr> Acked-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230821131548.269204-1-contact@emersion.fr
-
- 24 Oct, 2023 8 commits
-
-
Jonas Karlman authored
Add support for displaying 10-bit 4:2:0 and 4:2:2 formats produced by the Rockchip Video Decoder on RK322X, RK3288, RK3328 and RK3399. Also add support for 10-bit 4:4:4 format while at it. V5: Use drm_format_info_min_pitch() for correct bpp Add missing NV21, NV61 and NV42 formats V4: Rework RK3328/RK3399 win0/1 data to not affect RK3368 V2: Added NV30 support Signed-off-by:Jonas Karlman <jonas@kwiboo.se> Reviewed-by:
Sandy Huang <hjc@rock-chips.com> Reviewed-by:
Christopher Obbard <chris.obbard@collabora.com> Tested-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20231023173718.188102-3-jonas@kwiboo.se
-
Jonas Karlman authored
DRM_FORMAT_NV20 and DRM_FORMAT_NV30 formats is the 2x1 and non-subsampled variant of NV15, a 10-bit 2-plane YUV format that has no padding between components. Instead, luminance and chrominance samples are grouped into 4s so that each group is packed into an integer number of bytes: YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes The '20' and '30' suffix refers to the optimum effective bits per pixel which is achieved when the total number of luminance samples is a multiple of 4. V2: Added NV30 format Signed-off-by:
-
Andy Yan authored
formats_win_full_10bit is for cluster window, formats_win_full_10bit_yuyv is for rk356x esmart, rk3588 esmart window will support more format. formats_win_lite is for smart window. Rename it based the windows type may let meaning is clearer Signed-off-by:
Andy Yan <andy.yan@rock-chips.com> Acked-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Andy Yan authored
Add 10 bit RGB and AFBC based YUV format supported by vop2. Signed-off-by:
-
Andy Yan authored
The cluster window on vop2 doesn't support linear yuv format(NV12/16/24), it only support afbc based yuv format(DRM_FORMAT_YUV420_8BIT/10BIT), which will be added in next patch. Fixes: 604be855 ("drm/rockchip: Add VOP2 driver") Signed-off-by:
-
Andy Yan authored
We can't rely on cpp for bpp calculation as the cpp of some formats(DRM_FORMAT_YUV420_8BIT/10BIT, etc) is zero. Signed-off-by:
-
Liu Ying authored
In order to support burst mode, vendor drivers set lane_mbps higher than bandwidth through DPI interface. So, calculate horizontal component lane byte clock cycle(lbcc) based on lane_mbps instead of pixel clock rate for burst mode. Fixes: ac87d236 ("drm/bridge: synopsys: dw-mipi-dsi: Use pixel clock rate to calculate lbcc") Reported-by:
Liu Ying <victor.liu@nxp.com> Signed-off-by:
-
Geert Uytterhoeven authored
Currently drm_client_buffer_addfb() uses the legacy drm_mode_addfb(), which uses bpp and depth to guess the wanted buffer format. However, drm_client_buffer_addfb() already knows the exact buffer format, so there is no need to convert back and forth between buffer format and bpp/depth, and the function can just call drm_mode_addfb2() directly instead. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
-
- 23 Oct, 2023 9 commits
-
-
Simon Ser authored
These will show up as monospace, and will get linkified as soon as we document the macro they point to. Signed-off-by:
-
Dario Binacchi authored
Replace 'pack' with 'back'. Fixes: c8b75bca ("drm/vc4: Add KMS support for Raspberry Pi.") Signed-off-by:
Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by:
Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by:
-
Deepak R Varma authored
The work items listed in the TODO file of this driver file are either completed or dropped. The file is no more significant according to the maintainers. Hence removing it from the sources. Suggested-by:
Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by:
Deepak R Varma <drv@mailo.com> Reviewed-by:
-
Stanislaw Gruszka authored
We do not run 37xx VPU on non-silicon platforms any longer. Remove deprecated code to make it cleaner. Reviewed-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by:
-
Stanislaw Gruszka authored
Initialize HW specific parameters only once. We do not have to do this on every power_up (performed during initialization and on resume). Move corresponding code to ->info_init() Reviewed-by:
-
Krystian Pradzynski authored
Introduce ivpu_jsm_msg_type_to_str() helper to print type of IPC message. This will make reading logs and debugging IPC issues easier. Co-developed-by:
Maciej Falkowski <maciej.falkowski@intel.com> Signed-off-by:
Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Reviewed-by:
-
Karol Wachowski authored
Do not unnecessarily wake up device to read clock rate. Return 0 as clk_rate if device is suspended. Signed-off-by:
Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by:
-
Krystian Pradzynski authored
Remove two out of four _POLL macros. For two remaining _POLL macros add message about polling register start and finish. Additionally avoid inconsequence when using REGV_WR/RD macros in MMU code - passing raw register offset instead of register name. Signed-off-by:
-
Krystian Pradzynski authored
Quite often during test corner cases IPC, JSM functions can flood dmesg with warn or err messages. With that lost dmesg history. Change warn, err to ratelimited versions in IPC, JSM to suppress dmesg spam occurrence during fail test scenarios. Signed-off-by:
-
- 19 Oct, 2023 1 commit
-
-
Cong Yang authored
DRM_PANEL_ILITEK_ILI9882T is being split out from DRM_PANEL_BOE_TV101WUM_NL6. Since the arm64 defconfig had the BOE panel driver enabled, let's also enable the Ilitek driver. Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Cong Yang <yangcong5@huaqin.corp-partner.google.com> Signed-off-by:
-
