- 20 Mar, 2020 1 commit
-
-
Greg Kroah-Hartman authored
For the bpf syscall, we are relying on the compiler to properly zero out the bpf_attr union that we copy userspace data into. Unfortunately that doesn't always work properly, padding and other oddities might not be correctly zeroed, and in some tests odd things have been found when the stack is pre-initialized to other values. Fix this by explicitly memsetting the structure to 0 before using it. Reported-by:
Maciej Żenczykowski <maze@google.com> Reported-by:
John Stultz <john.stultz@linaro.org> Reported-by:
Alexander Potapenko <glider@google.com> Reported-by:
Alistair Delva <adelva@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Yonghong Song <yhs@fb.com> Link: https://android-review.googlesource.com/c/kernel/common/+/1235490 Link: https://lore.kernel.org/bpf/20200320094813.GA421650@kroah.com
-
- 17 Mar, 2020 2 commits
-
-
Martin KaFai Lau authored
The bpf_struct_ops tcp-cc name should be sanitized in order to avoid problematic chars (e.g. whitespaces). This patch reuses the bpf_obj_name_cpy() for accepting the same set of characters in order to keep a consistent bpf programming experience. A "size" param is added. Also, the strlen is returned on success so that the caller (like the bpf_tcp_ca here) can error out on empty name. The existing callers of the bpf_obj_name_cpy() only need to change the testing statement to "if (err < 0)". For all these existing callers, the err will be overwritten later, so no extra change is needed for the new strlen return value. v3: - reverse xmas tree style v2: - Save the orig_src to avoid "end - size" (Andrii) Fixes: 0baf26b0 ("bpf: tcp: Support tcp_congestion_ops in bpf") Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200314010209.1131542-1-kafai@fb.com
-
Petr Machata authored
The fix referenced below causes a crash when an ERSPAN tunnel is created without passing IFLA_INFO_DATA. Fix by validating passed-in data in the same way as ipgre does. Fixes: e1f8f78f ("net: ip_gre: Separate ERSPAN newlink / changelink callbacks") Reported-by: syzbot+1b4ebf4dae4e510dd219@syzkaller.appspotmail.com Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 16 Mar, 2020 23 commits
-
-
Jisheng Zhang authored
For the case where the last mvneta_poll did not process all RX packets, we need to xor the pp->cause_rx_tx or port->cause_rx_tx before claculating the rx_queue. Fixes: 2dcf75e2 ("net: mvneta: Associate RX queues with each CPU") Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by:
-
Zheng Wei authored
printk in macro vxge_debug_ll uses __VA_ARGS__ without "##" prefix, it causes a build error when there is no variable arguments(e.g. only fmt is specified.). Signed-off-by:
Zheng Wei <wei.zheng@vivo.com> Signed-off-by:
-
David S. Miller authored
Madalin Bucur says: ==================== QorIQ DPAA ARM RDBs need internal delay on RGMII v2: used phy_interface_mode_is_rgmii() to identify RGMII The QorIQ DPAA 1 based RDB boards require internal delay on both Tx and Rx to be set. The patch set ensures all RGMII modes are treated correctly by the FMan driver and sets the phy-connection-type to "rgmii-id" to restore functionality. Previously Rx internal delay was set by board pull-ups and was left untouched by the PHY driver. Since commit 1b3047b5 ("net: phy: realtek: add support for configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver has control over the RGMII RX delay and it is disabling it for other modes than RGMII_RXID and RGMII_ID. Please note that u-boot in particular performs a fix-up of the PHY connection type and will overwrite the values from the Linux device tree. Another patch set was sent for u-boot and one needs to apply that [1] to the boot loader, to ensure this fix is complete, unless a different bootloader is used. ==================== Signed-off-by:
-
Madalin Bucur authored
The correct setting for the RGMII ports on LS1046ARDB is to enable delay on both Rx and Tx so the interface mode used must be PHY_INTERFACE_MODE_RGMII_ID. Since commit 1b3047b5 ("net: phy: realtek: add support for configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver has control over the RGMII RX delay and it is disabling it for RGMII_TXID. The LS1046ARDB uses two such PHYs in RGMII_ID mode but in the device tree the mode was described as "rgmii". Changing the phy-connection-type to "rgmii-id" to address the issue. Fixes: 3fa395d2 ("arm64: dts: add LS1046A DPAA FMan nodes") Signed-off-by:
Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by:
-
Madalin Bucur authored
The correct setting for the RGMII ports on LS1043ARDB is to enable delay on both Rx and Tx so the interface mode used must be PHY_INTERFACE_MODE_RGMII_ID. Since commit 1b3047b5 ("net: phy: realtek: add support for configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver has control over the RGMII RX delay and it is disabling it for RGMII_TXID. The LS1043ARDB uses two such PHYs in RGMII_ID mode but in the device tree the mode was described as "rgmii_txid". This issue was not apparent at the time as the PHY driver took the same action for RGMII_TXID and RGMII_ID back then but it became visible (RX no longer working) after the above patch. Changing the phy-connection-type to "rgmii-id" to address the issue. Fixes: bf02f2ff ("arm64: dts: add LS1043A DPAA FMan support") Signed-off-by:
-
Madalin Bucur authored
Treat all internal delay variants the same as RGMII. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Michal Kubecek says: ==================== ethtool: fail with error if request has unknown flags Jakub Kicinski pointed out that if unrecognized flags are set in netlink header request, kernel shoud fail with an error rather than silently ignore them so that we have more freedom in future flags semantics. To help userspace with handling such errors, inform the client which flags are supported by kernel. For that purpose, we need to allow passing cookies as part of extack also in case of error (they can be only passed on success now). ==================== Signed-off-by: -
Michal Kubecek authored
As pointed out by Jakub Kicinski, we ethtool netlink code should respond with an error if request head has flags set which are not recognized by kernel, either as a mistake or because it expects functionality introduced in later kernel versions. To avoid unnecessary roundtrips, use extack cookie to provide the information about supported request flags. Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Michal Kubecek authored
Similar to existing nl_set_extack_cookie_u64(), add new helper nl_set_extack_cookie_u32() which sets extack cookie to a u32 value. Signed-off-by:
-
Michal Kubecek authored
Commit ba0dc5f6 ("netlink: allow sending extended ACK with cookie on success") introduced a cookie which can be sent to userspace as part of extended ack message in the form of NLMSGERR_ATTR_COOKIE attribute. Currently the cookie is ignored if error code is non-zero but there is no technical reason for such limitation and it can be useful to provide machine parseable information as part of an error message. Include NLMSGERR_ATTR_COOKIE whenever the cookie has been set, regardless of error code. Signed-off-by:
-
Cong Wang authored
route4_change() allocates a new filter and copies values from the old one. After the new filter is inserted into the hash table, the old filter should be removed and freed, as the final step of the update. However, the current code mistakenly removes the new one. This looks apparently wrong to me, and it causes double "free" and use-after-free too, as reported by syzbot. Reported-and-tested-by: syzbot+f9b32aaacd60305d9687@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+2f8c233f131943d6056d@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+9c2df9fd5e9445b74e01@syzkaller.appspotmail.com Fixes: 1109c005 ("net: sched: RCU cls_route") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
David S. Miller authored
Taehee Yoo says: ==================== hsr: fix several bugs in generic netlink callback This patchset is to fix several bugs they are related in generic netlink callback in hsr module. 1. The first patch is to add missing rcu_read_lock() in hsr_get_node_{list/status}(). The hsr_get_node_{list/status}() are not protected by RTNL because they are callback functions of generic netlink. But it calls __dev_get_by_index() without acquiring RTNL. So, it would use unsafe data. 2. The second patch is to avoid failure of hsr_get_node_list(). hsr_get_node_list() is a callback of generic netlink and it is used to get node information in userspace. But, if there are so many nodes, it fails because of buffer size. So, in this patch, restart routine is added. 3. The third patch is to set .netnsok flag to true. If .netnsok flag is false, non-init_net namespace is not allowed to operate generic netlink operations. So, currently, non-init_net namespace has no way to get node information because .netnsok is false in the current hsr code. Change log: v1->v2: - Preserve reverse christmas tree variable ordering in the second patch. ==================== Signed-off-by: -
Taehee Yoo authored
The hsr module has been supporting the list and status command. (HSR_C_GET_NODE_LIST and HSR_C_GET_NODE_STATUS) These commands send node information to the user-space via generic netlink. But, in the non-init_net namespace, these commands are not allowed because .netnsok flag is false. So, there is no way to get node information in the non-init_net namespace. Fixes: f421436a ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Taehee Yoo authored
The hsr_get_node_list() is to send node addresses to the userspace. If there are so many nodes, it could fail because of buffer size. In order to avoid this failure, the restart routine is added. Fixes: f421436a ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by:
-
Taehee Yoo authored
hsr_get_node_{list/status}() are not under rtnl_lock() because they are callback functions of generic netlink. But they use __dev_get_by_index() without rtnl_lock(). So, it would use unsafe data. In order to fix it, rcu_read_lock() and dev_get_by_index_rcu() are used instead of __dev_get_by_index(). Fixes: f421436a ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: -
David S. Miller authored
Takashi Iwai says: ==================== net: Use scnprintf() for avoiding potential buffer overflow here is a respin of trivial patch series just to convert suspicious snprintf() usages with the more safer one, scnprintf(). v1->v2: Align the remaining lines to the open parenthesis Excluded i40e patch that was already queued ==================== Signed-off-by: -
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Cc: "David S . Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Cc: "David S . Miller" <davem@davemloft.net> Cc: Edward Cree <ecree@solarflare.com> Cc: Martin Habets <mhabets@solarflare.com> Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Cc: netdev@vger.kernel.org Signed-off-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Reviewed-by:
Simon Horman <simon.horman@netronome.com> Acked-by:
Shannon Nelson <snelson@pensando.io> Cc: "David S . Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: oss-drivers@netronome.com Cc: netdev@vger.kernel.org Signed-off-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Reviewed-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Cc: "David S . Miller" <davem@davemloft.net> Cc: Tariq Toukan <tariqt@mellanox.com> To: netdev@vger.kernel.org Signed-off-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Cc: "David S . Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by:
-
Ido Schimmel authored
The cited commit set a value of 2^31-1 in order to "disable" the shaper on a given a port. However, the length of the maximum shaper rate field was not updated from 28 bits to 31 bits, which means ports are still limited to ~268Gbps despite supporting speeds of 400Gbps. Fix this by increasing the field's length. Fixes: 92afbfed ("mlxsw: reg: Increase MLXSW_REG_QEEC_MAS_DIS") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
-
- 15 Mar, 2020 8 commits
-
-
Florian Westphal authored
The debug check must be done after unregister_netdevice_many() call -- the list_del() for this is done inside .ndo_stop. Fixes: 2843a253 ("geneve: speedup geneve tunnels dismantle") Reported-and-tested-by: <syzbot+68a8ed58e3d17c700de5@syzkaller.appspotmail.com> Cc: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Willem de Bruijn authored
PACKET_RX_RING can cause multiple writers to access the same slot if a fast writer wraps the ring while a slow writer is still copying. This is particularly likely with few, large, slots (e.g., GSO packets). Synchronize kernel thread ownership of rx ring slots with a bitmap. Writers acquire a slot race-free by testing tp_status TP_STATUS_KERNEL while holding the sk receive queue lock. They release this lock before copying and set tp_status to TP_STATUS_USER to release to userspace when done. During copying, another writer may take the lock, also see TP_STATUS_KERNEL, and start writing to the same slot. Introduce a new rx_owner_map bitmap with a bit per slot. To acquire a slot, test and set with the lock held. To release race-free, update tp_status and owner bit as a transaction, so take the lock again. This is the one of a variety of discussed options (see Link below): * instead of a shadow ring, embed the data in the slot itself, such as in tp_padding. But any test for this field may match a value left by userspace, causing deadlock. * avoid the lock on release. This leaves a small race if releasing the shadow slot before setting TP_STATUS_USER. The below reproducer showed that this race is not academic. If releasing the slot after tp_status, the race is more subtle. See the first link for details. * add a new tp_status TP_KERNEL_OWNED to avoid the transactional store of two fields. But, legacy applications may interpret all non-zero tp_status as owned by the user. As libpcap does. So this is possible only opt-in by newer processes. It can be added as an optional mode. * embed the struct at the tail of pg_vec to avoid extra allocation. The implementation proved no less complex than a separate field. The additional locking cost on release adds contention, no different than scaling on multicore or multiqueue h/w. In practice, below reproducer nor small packet tcpdump showed a noticeable change in perf report in cycles spent in spinlock. Where contention is problematic, packet sockets support mitigation through PACKET_FANOUT. And we can consider adding opt-in state TP_KERNEL_OWNED. Easy to reproduce by running multiple netperf or similar TCP_STREAM flows concurrently with `tcpdump -B 129 -n greater 60000`. Based on an earlier patchset by Jon Rosen. See links below. I believe this issue goes back to the introduction of tpacket_rcv, which predates git history. Link: https://www.mail-archive.com/netdev@vger.kernel.org/msg237222.htmlSuggested-by:
Jon Rosen <jrosen@cisco.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Petr Machata authored
ERSPAN shares most of the code path with GRE and gretap code. While that helps keep the code compact, it is also error prone. Currently a broken userspace can turn a gretap tunnel into a de facto ERSPAN one by passing IFLA_GRE_ERSPAN_VER. There has been a similar issue in ip6gretap in the past. To prevent these problems in future, split the newlink and changelink code paths. Split the ERSPAN code out of ipgre_netlink_parms() into a new function erspan_netlink_parms(). Extract a piece of common logic from ipgre_newlink() and ipgre_changelink() into ipgre_newlink_encap_setup(). Add erspan_newlink() and erspan_changelink(). Fixes: 84e54fe0 ("gre: introduce native tunnel support for ERSPAN") Signed-off-by:
-
Shahjada Abul Husain authored
Currently, the hardware TID index is assumed to start from index 0. However, with the following changeset, commit c2193999 ("cxgb4: add support for high priority filters") hardware TID index can start after the high priority region, which has introduced a regression resulting in remove filters entry failure for cxgb4 unload path. This patch fix that. Fixes: c2193999 ("cxgb4: add support for high priority filters") Signed-off-by:
Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by:
-
Markus Fuchs authored
Not every stmmac based platform makes use of the eth_wake_irq or eth_lpi interrupts. Use the platform_get_irq_byname_optional variant for these interrupts, so no error message is displayed, if they can't be found. Rather print an information to hint something might be wrong to assist debugging on platforms which use these interrupts. Signed-off-by:
Markus Fuchs <mklntf@gmail.com> Signed-off-by:
-
Bruno Meneguele authored
The bpfilter UMH code was recently changed to log its informative messages to /dev/kmsg, however this interface doesn't support SEEK_CUR yet, used by dprintf(). As result dprintf() returns -EINVAL and doesn't log anything. However there already had some discussions about supporting SEEK_CUR into /dev/kmsg interface in the past it wasn't concluded. Since the only user of that from userspace perspective inside the kernel is the bpfilter UMH (userspace) module it's better to correct it here instead waiting a conclusion on the interface. Fixes: 36c4357c ("net: bpfilter: print umh messages to /dev/kmsg") Signed-off-by:
Bruno Meneguele <bmeneg@redhat.com> Signed-off-by:
-
Cong Wang authored
In commit 599be01e ("net_sched: fix an OOB access in cls_tcindex") I moved cp->hash calculation before the first tcindex_alloc_perfect_hash(), but cp->alloc_hash is left untouched. This difference could lead to another out of bound access. cp->alloc_hash should always be the size allocated, we should update it after this tcindex_alloc_perfect_hash(). Reported-and-tested-by: syzbot+dcc34d54d68ef7d2d53d@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+c72da7b9ed57cde6fca2@syzkaller.appspotmail.com Fixes: 599be01e ("net_sched: fix an OOB access in cls_tcindex") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Cong Wang authored
syzbot reported a use-after-free in tcindex_dump(). This is due to the lack of RTNL in the deferred rcu work. We queue this work with RTNL in tcindex_change(), later, tcindex_dump() is called: fh = tp->ops->get(tp, t->tcm_handle); ... err = tp->ops->change(..., &fh, ...); tfilter_notify(..., fh, ...); but there is nothing to serialize the pending tcindex_partial_destroy_work() with tcindex_dump(). Fix this by simply holding RTNL in tcindex_partial_destroy_work(), so that it won't be called until RTNL is released after tc_new_tfilter() is completed. Reported-and-tested-by: syzbot+653090db2562495901dc@syzkaller.appspotmail.com Fixes: 3d210534 ("net_sched: fix a race condition in tcindex_destroy()") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
- 13 Mar, 2020 4 commits
-
-
David S. Miller authored
Merge tag 'wireless-drivers-2020-03-13' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.6 Third, and hopefully last, set of fixes for v5.6. iwlwifi * fix a locking issue in time events handling * a fix in rate-scaling * fix for a potential NULL pointer deref * enable antenna diversity in some devices that were erroneously not doing it * allow FW dumps to continue when the FW is stuck * a fix in the HE capabilities handling * another fix for FW dumps where we were reading wrong addresses * fix link in MAINTAINERS file rtlwifi * fix regression causing connect issues in v5.4 wlcore * remove merge damage which luckily didn't have any impact on functionality ==================== Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf 2020-03-12 The following pull-request contains BPF updates for your *net* tree. We've added 12 non-merge commits during the last 8 day(s) which contain a total of 12 files changed, 161 insertions(+), 15 deletions(-). The main changes are: 1) Andrii fixed two bugs in cgroup-bpf. 2) John fixed sockmap. 3) Luke fixed x32 jit. 4) Martin fixed two issues in struct_ops. 5) Yonghong fixed bpf_send_signal. 6) Yoshiki fixed BTF enum. ==================== Signed-off-by: -
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "It's a bit quieter, probably not as much as it could be. There is on large regression fix in here from Lyude for displayport bandwidth calculations, there've been reports of multi-monitor in docks not working since -rc1 and this has been tested to fix those. Otherwise it's a bunch of i915 (with some GVT fixes), a set of amdgpu watermark + bios fixes, and an exynos iommu cleanup fix. core: - DP MST bandwidth regression fix. i915: - hard lockup fix - GVT fixes - 32-bit alignment issue fix - timeline wait fixes - cacheline_retire and free amdgpu: - Update the display watermark bounding box for navi14 - Fix fetching vbios directly from rom on vega20/arcturus - Navi and renoir watermark fixes exynos: - iommu object cleanup fix" ` * tag 'drm-fixes-2020-03-13' of git://anongit.freedesktop.org/drm/drm: drm/dp_mst: Rewrite and fix bandwidth limit checks drm/dp_mst: Reprobe path resources in CSN handler drm/dp_mst: Use full_pbn instead of available_pbn for bandwidth checks drm/dp_mst: Rename drm_dp_mst_is_dp_mst_end_device() to be less redundant drm/i915: Defer semaphore priority bumping to a workqueue drm/i915/gt: Close race between cacheline_retire and free drm/i915/execlists: Enable timeslice on partial virtual engine dequeue drm/i915: be more solid in checking the alignment drm/i915/gvt: Fix dma-buf display blur issue on CFL drm/i915: Return early for await_start on same timeline drm/i915: Actually emit the await_start drm/amdgpu/powerplay: nv1x, renior copy dcn clock settings of watermark to smu during boot up drm/exynos: Fix cleanup of IOMMU related objects drm/amdgpu: correct ROM_INDEX/DATA offset for VEGA20 drm/amd/display: update soc bb for nv14 drm/i915/gvt: Fix emulated vbt size issue drm/i915/gvt: Fix unnecessary schedule timer when no vGPU exits
-
Dave Airlie authored
Merge tag 'topic/mst-bw-check-fixes-for-airlied-2020-03-12-2' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes UAPI Changes: None Cross-subsystem Changes: None Core Changes: Fixed regressions introduced by commit cd82d82c ("drm/dp_mst: Add branch bandwidth validation to MST atomic check"), which would cause us to: * Calculate the available bandwidth on an MST topology incorrectly, and as a result reject most display configurations that would try to enable more then one sink on a topology * Occasionally expose MST connectors to userspace before finishing probing their PBN capabilities, resulting in us rejecting display configurations because we assumed briefly that no bandwidth was available Driver Changes: None Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/bf16ee577567beed91c86b7d9cda3ec2e8c50a71.camel@redhat.com
-
- 12 Mar, 2020 2 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2020-03-12' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.6-rc6: - hard lockup fix - GVT fixes - 32-bit alignment issue fix - timeline wait fixes - cacheline_retire and free Signed-off-by:
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-5.6-2020-03-11' of git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.6-2020-03-11: amdgpu: - Update the display watermark bounding box for navi14 - Fix fetching vbios directly from rom on vega20/arcturus - Navi and renoir watermark fixes Signed-off-by:
-
