- 18 May, 2018 20 commits
-
-
Steffen Maier authored
We already have a SCSI trace for the end of abort and scsi_eh TMF. Due to zfcp_erp_wait() and fc_block_scsi_eh() time can pass between the start of our eh callback and an actual send/recv of an abort / TMF request. In order to see the temporal sequence including any abort / TMF send retries, add a trace before the above two blocking functions. This supports problem determination with scsi_eh and parallel zfcp ERP. No need to explicitly trace the beginning of our eh callback, since we typically can send an abort / TMF and see its HBA response (in the worst case, it's a pseudo response on dismiss all of adapter recovery, e.g. due to an FSF request timeout [fsrth_1] of the abort / TMF). If we cannot send, we now get a trace record for the first "abrt_wt" or "[lt]r_wait" which denotes almost the beginning of the callback. No need to explicitly trace the wakeup after the above two blocking functions because the next retry loop causes another trace in any case and that is sufficient. Example trace records formatted with zfcpdbf from s390-tools: Timestamp : ... Area : SCSI Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : abrt_wt abort, before zfcp_erp_wait() Request ID : 0x0000000000000000 none (invalid) SCSI ID : 0x<scsi_id> SCSI LUN : 0x<scsi_lun> SCSI LUN high : 0x<scsi_lun_high> SCSI result : 0x<scsi_result_of_cmd_to_be_aborted> SCSI retries : 0x<retries_of_cmd_to_be_aborted> SCSI allowed : 0x<allowed_retries_of_cmd_to_be_aborted> SCSI scribble : 0x<req_id_of_cmd_to_be_aborted> SCSI opcode : <CDB_of_cmd_to_be_aborted> FCP rsp inf cod: 0x.. none (invalid) FCP rsp IU : ... none (invalid) Timestamp : ... Area : SCSI Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : lr_wait LUN reset, before zfcp_erp_wait() Request ID : 0x0000000000000000 none (invalid) SCSI ID : 0x<scsi_id> SCSI LUN : 0x<scsi_lun> SCSI LUN high : 0x<scsi_lun_high> SCSI result : 0x... unrelated SCSI retries : 0x.. unrelated SCSI allowed : 0x.. unrelated SCSI scribble : 0x... unrelated SCSI opcode : ... unrelated FCP rsp inf cod: 0x.. none (invalid) FCP rsp IU : ... none (invalid) Signed-off-by:
Steffen Maier <maier@linux.ibm.com> Fixes: 63caf367 ("[SCSI] zfcp: Improve reliability of SCSI eh handlers in zfcp") Fixes: af4de36d ("[SCSI] zfcp: Block scsi_eh thread for rport state BLOCKED") Cc: <stable@vger.kernel.org> #2.6.38+ Reviewed-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Steffen Maier authored
For problem determination we need to see whether and why we were successful or not. This allows deduction of scsi_eh escalation. Example trace record formatted with zfcpdbf from s390-tools: Timestamp : ... Area : SCSI Subarea : 00 Level : 1 Exception : - CPU ID : .. Caller : 0x... Record ID : 1 Tag : schrh_r SCSI host reset handler result Request ID : 0x0000000000000000 none (invalid) SCSI ID : 0xffffffff none (invalid) SCSI LUN : 0xffffffff none (invalid) SCSI LUN high : 0xffffffff none (invalid) SCSI result : 0x00002002 field re-used for midlayer value: SUCCESS or in other cases: 0x2009 == FAST_IO_FAIL SCSI retries : 0xff none (invalid) SCSI allowed : 0xff none (invalid) SCSI scribble : 0xffffffffffffffff none (invalid) SCSI opcode : ffffffff ffffffff ffffffff ffffffff none (invalid) FCP rsp inf cod: 0xff none (invalid) FCP rsp IU : 00000000 00000000 00000000 00000000 none (invalid) 00000000 00000000 v2.6.35 commit a1dbfddd ("[SCSI] zfcp: Pass return code from fc_block_scsi_eh to scsi eh") introduced the first return with something other than the previously hardcoded single SUCCESS return path. Signed-off-by:Jens Remus <jremus@linux.ibm.com> Reviewed-by:
-
Uma Krishnan authored
Depending on the underlying transport, cxlflash has a dependency on either the CXL or OCXL drivers, which are enabled via their Kconfig option. Instead of having a module wide dependency on these config options, it is better to isolate the object modules that are dependent on the CXL and OCXL drivers and adjust the module dependencies accordingly. This commit isolates the object files that are dependent on CXL and/or OCXL. The cxl/ocxl fops used in the core driver are tucked under an ifdef to avoid compilation errors. Signed-off-by:
Uma Krishnan <ukrishn@linux.vnet.ibm.com> Acked-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by:
-
Uma Krishnan authored
As a staging cleanup to support transport specific builds of the cxlflash module, relocate device dependent assignments to header files. This will avoid littering the core driver with conditional compilation logic. Signed-off-by:
-
Uma Krishnan authored
The new header file, backend.h, that was recently added is missing the include guards. This commit adds the guards. Signed-off-by:
-
Matthew R. Ochs authored
AFUs can only process a single AFU command at a time. This is enforced with a global mutex situated within the AFU send routine. As this mutex has a global scope, it has the potential to unnecessarily block commands destined for other AFUs. Instead of using a global mutex, transition the mutex to be per-AFU. This will allow commands to only be blocked by siblings of the same AFU. Signed-off-by:
-
Uma Krishnan authored
When a superpipe process that makes use of virtual LUNs is terminated or killed abruptly, there is a possibility that the cxlflash driver could hang and deprive other operations on the adapter. The release fop registered to be invoked on a context close, detaches every LUN associated with the context. The underlying service to detach the LUN assumes it has been called with the read semaphore held, and releases the semaphore before any operation that could be time consuming. When invoked without holding the read semaphore, an opportunity is created for the semaphore's count to become negative when it is temporarily released during one of these potential lengthy operations. This negative count results in subsequent acquisition attempts taking forever, leading to the hang. To support the current design point of holding the semaphore on the ioctl() paths, the release fop should acquire it before invoking any ioctl services. Signed-off-by:
-
Uma Krishnan authored
The kernel log can get filled with debug messages from send_cmd_ioarrin() when dynamic debug is enabled for the cxlflash module and there is a lot of legacy I/O traffic. While these messages are necessary to debug issues that involve command tracking, the abundance of data can overwrite other useful data in the log. The best option available is to limit the messages that should serve most of the common use cases. Signed-off-by:
-
Uma Krishnan authored
The following Oops may be encountered if the device is reset, i.e. EEH recovery, while there is heavy I/O traffic: 59:mon> t [c000200db64bb680] c008000009264c40 cxlflash_queuecommand+0x3b8/0x500 [cxlflash] [c000200db64bb770] c00000000090d3b0 scsi_dispatch_cmd+0x130/0x2f0 [c000200db64bb7f0] c00000000090fdd8 scsi_request_fn+0x3c8/0x8d0 [c000200db64bb900] c00000000067f528 __blk_run_queue+0x68/0xb0 [c000200db64bb930] c00000000067ab80 __elv_add_request+0x140/0x3c0 [c000200db64bb9b0] c00000000068daac blk_execute_rq_nowait+0xec/0x1a0 [c000200db64bba00] c00000000068dbb0 blk_execute_rq+0x50/0xe0 [c000200db64bba50] c0000000006b2040 sg_io+0x1f0/0x520 [c000200db64bbaf0] c0000000006b2e94 scsi_cmd_ioctl+0x534/0x610 [c000200db64bbc20] c000000000926208 sd_ioctl+0x118/0x280 [c000200db64bbcc0] c00000000069f7ac blkdev_ioctl+0x7fc/0xe30 [c000200db64bbd20] c000000000439204 block_ioctl+0x84/0xa0 [c000200db64bbd40] c0000000003f8514 do_vfs_ioctl+0xd4/0xa00 [c000200db64bbde0] c0000000003f8f04 SyS_ioctl+0xc4/0x130 [c000200db64bbe30] c00000000000b184 system_call+0x58/0x6c When there is no room to send the I/O request, the cached room is refreshed by reading the memory mapped command room value from the AFU. The AFU register mapping is refreshed during a reset, creating a race condition that can lead to the Oops above. During a device reset, the AFU should not be unmapped until all the active send threads quiesce. An atomic counter, cmds_active, is currently used to track internal AFU commands and quiesce during reset. This same counter can also be used for the active send threads. Signed-off-by:
-
Xiaofei Tan authored
Currently we don't check that device is not gone before dereferencing its elements in the function hisi_sas_task_exec() (specifically, the DQ pointer). This patch fixes this issue by filling in the DQ pointer in hisi_sas_task_prep() after we check that the device pointer is still safe to reference. [mkp: typo] Signed-off-by:
Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Xiang Chen authored
The IPTT of a slot is unique, and we currently use hisi_hba lock to protect it. Now slot is managed on hisi_sas_device.list, so use DQ lock to protect for allocating and freeing the slot. Signed-off-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
-
Xiang Chen authored
Currently we lock the DQ to protect whole delivery process. So this stops us building slots for the same queue in parallel, and can affect performance. To optimise it, only lock the DQ during special periods, specifically when allocating a slot from the DQ and when delivering a slot to the HW. This approach is now safe, thanks to the previous patches to ensure that we always deliver a slot to the HW once allocated. Signed-off-by:
-
Xiang Chen authored
Currently we allocate the slot's memory buffer after allocating the DQ slot. To aid DQ lockout reduction, and allow slots to be built in parallel, move this step (which can fail) prior to allocating the slot. Also a stray spin_unlock_irqrestore() is removed from internal task exec function. Signed-off-by:
-
Xiang Chen authored
Since the task prep functions now should not fail, adjust the return types to void. In addition, some checks in the task prep functions are relocated to the main module; this is specifically the check for the number of elements in an sg list exceeded the HW SGE limit. Signed-off-by:
-
Xiang Chen authored
Currently we use DQ lock to protect delivery of DQ entry one by one. To optimise to allow more than one slot to be built for a single DQ in parallel, we need to remove the DQ lock when preparing slots, prior to delivery. To achieve this, we rearrange the slot build order to ensure that once we allocate a slot for a task, we do cannot fail to deliver the task. In this patch, we rearrange the slot building for SMP tasks to ensure that sg mapping part (which can fail) happens before we allocate the slot in the DQ. Signed-off-by:
-
Alim Akhtar authored
This makes ufshcd_config_pwr_mode non-static so that other vendors like exynos can use it. Signed-off-by:
Seungwon Jeon <essuuj@gmail.com> Signed-off-by:
Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by:
Avri Altman <avri.altman@wdc.com> Reviewed-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
-
Alim Akhtar authored
Some host controllers don't support host controller enable via HCE. Signed-off-by:
-
Alim Akhtar authored
Some host controllers support interrupt aggregation but don't allow resetting counter and timer in software. Signed-off-by:
-
Alim Akhtar authored
In the right behavior, setting the bit to '0' indicates clear and '1' indicates no change. If host controller handles this the other way, UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR can be used. [mkp: typo] Signed-off-by:
"Asutosh Das (asd)" <asutoshd@codeaurora.org> Signed-off-by:
-
Kees Cook authored
On the quest to remove all VLAs from the kernel[1] this moves buffers off the stack. In the second instance, this collapses two separately allocated buffers into a single buffer, since they are used consecutively, which saves 256 bytes (QUERY_DESC_MAX_SIZE + 1) of stack space. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.comSigned-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
-
- 15 May, 2018 5 commits
-
-
Luc Van Oostenryck authored
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by:
Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by:
-
Wen Xiong authored
This patch adds new adapter error log for P9 system with the new AZ SAS cable. Signed-off-by:
Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in esas2r_debug message. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Andrei Vagin authored
There are two advantages: * Direct I/O allows to avoid the write-back cache, so it reduces affects to other processes in the system. * Async I/O allows to handle a few commands concurrently. DIO + AIO shows a better perfomance for random write operations: Mode: O_DSYNC Async: 1 $ ./fio --bs=4K --direct=1 --rw=randwrite --ioengine=libaio --iodepth=64 --name=/dev/sda --runtime=20 --numjobs=2 WRITE: bw=45.9MiB/s (48.1MB/s), 21.9MiB/s-23.0MiB/s (22.0MB/s-25.2MB/s), io=919MiB (963MB), run=20002-20020msec Mode: O_DSYNC Async: 0 $ ./fio --bs=4K --direct=1 --rw=randwrite --ioengine=libaio --iodepth=64 --name=/dev/sdb --runtime=20 --numjobs=2 WRITE: bw=1607KiB/s (1645kB/s), 802KiB/s-805KiB/s (821kB/s-824kB/s), io=31.8MiB (33.4MB), run=20280-20295msec Known issue: DIF (PI) emulation doesn't work when a target uses async I/O, because DIF metadata is saved in a separate file, and it is another non-trivial task how to synchronize writing in two files, so that a following read operation always returns a consisten metadata for a specified block. Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Tested-by:
Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by:
Andrei Vagin <avagin@openvz.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
-
Kees Cook authored
On the quest to remove all VLAs from the kernel[1] this rearranges the code to avoid a VLA warning under -Wvla (gcc doesn't recognize "const" variables as not triggering VLA creation). Additionally cleans up variable naming to avoid 80 character column limit. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.comSigned-off-by:
Boaz Harrosh <ooo@electrozaur.com> Signed-off-by:
-
- 08 May, 2018 15 commits
-
-
Zhu Lingshan authored
use new netlink events helpers tcmu_netlink_init() and tcmu_netlink_send() to refactor netlink event attribute TCMU_ATTR_WRITECACHE(belongs to TCMU_CMD_RECONFIG_DEVICE) which is also emulate_write_cache in configFS. Removed tcmu_netlink_event() since we have new netlink events helpers now. Signed-off-by:
Zhu Lingshan <lszhu@suse.com> Acked-by:
-
Zhu Lingshan authored
use new netlink events helpers tcmu_netlink_init() and tcmu_netlink_send() to refactor netlink event attribute TCMU_ATTR_DEV_SIZE(belongs to TCMU_CMD_RECONFIG_DEVICE) which is also dev_size in configFS. Signed-off-by:
-
Zhu Lingshan authored
use new netlink events helpers tcmu_netlink_init() and tcmu_netlink_send() to refactor netlink event attribute TCMU_ATTR_DEV_CFG(belongs to TCMU_CMD_RECONFIG_DEVICE) which is also dev_config in configFS. Signed-off-by:
-
Zhu Lingshan authored
use new netlink events helpers tcmu_netlink_init() and tcmu_netlink_send() to refactor netlink event TCMU_CMD_REMOVED_DEVICE Signed-off-by:
-
Zhu Lingshan authored
use new netlink events helpers tcmu_netlink_init() and tcmu_netlink_send() to refactor netlink event TCMU_CMD_ADDED_DEVICE Signed-off-by:
-
Zhu Lingshan authored
Add new netlink events helpers tcmu_netlink_event_init() and tcmu_netlink_event_send(). These new functions intend to replace existing netlink events helper function tcmu_netlink_event(). The existing function tcmu_netlink_event() works well for events like TCMU_ADDED_DEVICE and TCMU_REMOVED_DEVICE which only has one netlink attribute. But if there is a command requires more than one attributes to send out, we have to use a struct to adapt the paremeter reconfig_data, it is hard to use one struct or a union in one struct to adapt every command with different attributes, it may get long and ugly. With the new two functions, we can call tcmu_netlink_event_init() to initialize a netlink event, then add all attributes we need by using nla_put_xxx(), at last use tcmu_netlink_event_send() to send it out. So that we don't need to use a long struct or union if we want to send mulitple attributes for different commands. [mkp: typos] Signed-off-by:
-
Wenwen Wang authored
In tw_chrdev_ioctl(), the length of the data buffer is firstly copied from the userspace pointer 'argp' and saved to the kernel object 'data_buffer_length'. Then a security check is performed on it to make sure that the length is not more than 'TW_MAX_IOCTL_SECTORS * 512'. Otherwise, an error code -EINVAL is returned. If the security check is passed, the entire ioctl command is copied again from the 'argp' pointer and saved to the kernel object 'tw_ioctl'. Then, various operations are performed on 'tw_ioctl' according to the 'cmd'. Given that the 'argp' pointer resides in userspace, a malicious userspace process can race to change the buffer length between the two copies. This way, the user can bypass the security check and inject invalid data buffer length. This can cause potential security issues in the following execution. This patch checks for capable(CAP_SYS_ADMIN) in tw_chrdev_open() to avoid the above issues. Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Acked-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
-
Wenwen Wang authored
In twa_chrdev_ioctl(), the ioctl driver command is firstly copied from the userspace pointer 'argp' and saved to the kernel object 'driver_command'. Then a security check is performed on the data buffer size indicated by 'driver_command', which is 'driver_command.buffer_length'. If the security check is passed, the entire ioctl command is copied again from the 'argp' pointer and saved to the kernel object 'tw_ioctl'. Then, various operations are performed on 'tw_ioctl' according to the 'cmd'. Given that the 'argp' pointer resides in userspace, a malicious userspace process can race to change the buffer size between the two copies. This way, the user can bypass the security check and inject invalid data buffer size. This can cause potential security issues in the following execution. This patch checks for capable(CAP_SYS_ADMIN) in twa_chrdev_open()t o avoid the above issues. Signed-off-by:
-
Tomohiro Kusumi authored
MPT2_MAGIC_NUMBER as well as drivers/scsi/mpt2sas/mpt2sas_ctl.h were removed to reuse mpt3sas code since commit 09ec55ed ("mpt2sas: Remove .c and .h files from mpt2sas driver"). Signed-off-by:
Tomohiro Kusumi <kusumi.tomohiro@osnexus.com> Signed-off-by:
-
Tomohiro Kusumi authored
drivers/scsi/mpt2sas/ no longer exists after commit c84b06a4 ("mpt3sas: Single driver module which supports both SAS 2.0 & SAS 3.0 HBAs") merged/removed it. Signed-off-by:
-
Dan Carpenter authored
If we had more than 32 megaraid cards then it would cause memory corruption. That's not likely, of course, but it's handy to enforce it and make the static checker happy. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in warning message Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistakes in lpfc_printf_log log message "mabilbox" -> "mailbox" "maibox" -> "mailbox" Signed-off-by:
-
Andrei Vagin authored
Signed-off-by:
Laurence Oberman <loberman@redhat.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in text string. Signed-off-by:
-
