Avoid resetting the module-wide i8042_platform_device pointer in
i8042_probe() or i8042_remove(), so that the device can be properly
destroyed by i8042_exit() on module unload.

Fixes: 9222ba68 ("Input: i8042 - add deferred probe support")
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Link: https://lore.kernel.org/r/20221109034148.23821-1-chenjun102@huawei.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

There are yet a few more ASUS ZenBook models that require the deferred
probe.  At least, there are different ZenBook UX325x and UX425x
models.  Let's extend the DMI matching table entries for adapting
those missing models.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20221108142027.28480-1-tiwai@suse.deSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Like on the Acer Switch 10 SW5-012, the Acer Switch V 10 SW5-017's _LID
method messes with home- and power-button GPIO IRQ settings, causing an
IRQ storm.

Add a quirk entry for the Acer Switch V 10 to the dmi_use_low_level_irq[]
DMI quirk list, to use low-level IRQs on this model, fixing the IRQ storm.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221106215320.67109-2-hdegoede@redhat.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

It seems that the Windows drivers for the ACPI0011 soc_button_array
device use low level triggered IRQs rather then using edge triggering.

Some ACPI tables depend on this, directly poking the GPIO controller's
registers to clear the trigger type when closing a laptop's/2-in-1's lid
and re-instating the trigger when opening the lid again.

Linux sets the edge/level on which to trigger to both low+high since
it is using edge type IRQs, the ACPI tables then ends up also setting
the bit for level IRQs and since both low and high level have been
selected by Linux we get an IRQ storm leading to soft lockups.

As a workaround for this the soc_button_array already contains
a DMI quirk table with device models known to have this issue.

Add a module parameter for this so that users can easily test if their
device is affected too and so that they can use the module parameter
as a workaround.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221106215320.67109-1-hdegoede@redhat.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

syzbot is reporting uninitialized value at iforce_init_device() [1], for
commit 6ac0aec6 ("Input: iforce - allow callers supply data buffer
when fetching device IDs") is checking that valid length is shorter than
bytes to read. Since iforce_get_id_packet() stores valid length when
returning 0, the caller needs to check that valid length is longer than or
equals to bytes to read.
Reported-by: syzbot <syzbot+4dd880c1184280378821@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 6ac0aec6 ("Input: iforce - allow callers supply data buffer when fetching device IDs")
Link: https://lore.kernel.org/r/531fb432-7396-ad37-ecba-3e42e7f56d5c@I-love.SAKURA.ne.jp
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

On ACPI systems (irq_pin_access_method == IRQ_PIN_ACCESS_ACPI_*) the driver
does not reset the controller at probe time, because sometimes the system
firmware loads a config and resetting might loose this config.

On the Nanote UMPC-01 device OTOH the config is in flash of the controller,
the controller needs a reset to load this; and the system firmware does not
reset the controller on a cold boot.

To fix the Nanote UMPC-01 touchscreen not working on a cold boot, try
resetting the controller and then re-reading the config when encountering
a config with 0 width/height/max_touch_num value and the controller has
not already been reset by goodix_ts_probe().

This should be safe to do in general because normally we should never
encounter a config with 0 width/height/max_touch_num. Doing this in
general not only avoids the need for a DMI quirk, but also might help
other systems.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20221025122930.421377-2-hdegoede@redhat.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add a compatible for Goodix touch screen chip GT7986U which is
is expected to be fully compatible with a driver written for GT7375P.
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221006185333.v7.3.I52e4b4b20e2eb0ae20f2a9bb198aa6410f04cf16@changeidSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The device works fine in native RMI mode, there is no reason to use legacy
PS/2 mode with it.
Signed-off-by: Aman Dhoot <amandhoot12@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Prepare input updates for 6.1 merge window.

In i8042_platform_init() and i8042_platform_exit(), we should call
of_node_put() for the reference 'root' returned by
of_find_node_by_path() which has increased the refcount.

Fixes: f57caaef ("[SERIO] i8042-sparcio.h: Convert to of_driver framework.")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220711064300.358757-1-windhl@126.com
[dtor: rearranged i8042_is_mr_coffee() a bit]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

LoongArch uses ACPI and nearly the same as X86/IA64 for 8042. So modify
i8042-acpipnpio.h slightly and enable it for LoongArch in i8042.h. Then
i8042 driver can work well under the ACPI firmware with PNP typed key-
board and mouse configured in DSDT.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20220917064020.1639709-2-chenhuacai@loongson.cnSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Now i8042-x86ia64io.h is shared by X86 and IA64, but it can be shared
by more platforms (such as LoongArch) with ACPI firmware on which PNP
typed keyboard and mouse is configured in DSDT. So rename it to i8042-
acpipnpio.h.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20220917064020.1639709-1-chenhuacai@loongson.cnSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The PinePhone keyboard case contains a battery managed by an integrated
power bank IC. The power bank IC communicates over I2C, and the keyboard
MCU firmware provides an interface to read and write its registers.
Let's use this interface to implement a SMBus adapter, so we can reuse
the driver for the power bank IC.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220618165747.55709-4-samuel@sholland.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The official Pine64 PinePhone keyboard case contains a matrix keypad and
a MCU which runs a libre firmware. Add support for its I2C interface.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220618165747.55709-3-samuel@sholland.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add devicetree support for the PinePhone keyboard case, which provides a
matrix keyboard interface and a proxied I2C bus.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220618165747.55709-2-samuel@sholland.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Convert the hid-over-i2c binding to DT schema format. The supplies should
probably be specific to a specific device, but it seems they are already
in use otherwise. 'wakeup-source' is added as it was not explicitly
documented.

There's a few warnings for undocumented properties 'vcc-supply' and
'reset-gpios'. Those remain as they probably should have a specific
compatible as well.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220927150916.1091217-1-robh@kernel.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Commit 1a59d1b8 ("treewide: Replace GPLv2 boilerplate/reference with
SPDX - rule 156") has left some empty comment blocks.

Remove them to save a few lines of code.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/26a2b905b259bfffaf2de5b26f2007b8606970ed.1664478665.git.christophe.jaillet@wanadoo.frSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Adds a new quirk for controllers that have a Profile button which has 4
states, reflected as an ABS_PROFILE axis with 4 values.
Signed-off-by: Nate Yocom <nate@yocom.org>
Tested-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20220908173930.28940-6-nate@yocom.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Define new ABS_PROFILE axis for input devices which need it, e.g. X-Box
Adaptive Controller and X-Box Elite 2.
Signed-off-by: Nate Yocom <nate@yocom.org>
Link: https://lore.kernel.org/r/20220908173930.28940-4-nate@yocom.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Adaptive controller sets 0x02 bit for this button, all others set 0x01
so presence of either is used for BTN_MODE.
Signed-off-by: Nate Yocom <nate@yocom.org>
Tested-by: Bastien Nocera <hadess@hadess.net>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com
Link: https://lore.kernel.org/r/20220908173930.28940-3-nate@yocom.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Adds correct VID/PID for this XTYPE_XBOXONE compatible controller to
xpad_device[] table.
Signed-off-by: Nate Yocom <nate@yocom.org>
Tested-by: Bastien Nocera <hadess@hadess.net>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20220908173930.28940-2-nate@yocom.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220928211003.61872-1-colin.i.king@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Link: https://lore.kernel.org/r/20220928143133.1809491-1-zengheng4@huawei.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Replace open coded variant of recently introduced
acpi_get_subsystem_id().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220928110548.43955-1-andriy.shevchenko@linux.intel.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

only renames, no functional changes. Some of the packets we send
seem superfluous now. Unfortunately I dont have the hardware to verify
whether they are.
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20220913213133.584979-3-rojtberg@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

reduces the amount of magic numbers and makes the code more readable
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20220913213133.584979-2-rojtberg@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the value
to be returned to user space.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: zhang songyi <zhang.songyi@zte.com.cn>
Link: https://lore.kernel.org/r/20220927070936.258300-1-zhang.songyi@zte.com.cnSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The driver is using of_match_ptr() and therefore needs to include
of.h header.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220927052217.2784593-1-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Both i.MX6 and i.MX8 reference manuals list 0xBF8 as SNVS_HPVIDR1
(chapters 57.9 and 6.4.5 respectively).

Without this, trying to read the revision number results in 0 on
all revisions, causing the i.MX6 quirk to apply on all platforms,
which in turn causes the driver to synthesise power button release
events instead of passing the real one as they happen even on
platforms like i.MX8 where that's not wanted.

Fixes: 1a26c920 ("Input: snvs_pwrkey - send key events for i.MX6 S, DL and Q")
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/4599101.ElGaqSPkdT@pliszkaSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Zero-length arrays are deprecated and we are moving towards adopting
C99 flexible-array members, instead. So, replace zero-length arrays
declarations in anonymous union with the new DECLARE_FLEX_ARRAY()
helper macro.

This helper allows for flexible-array members in unions.

Link: https://github.com/KSPP/linux/issues/193
Link: https://github.com/KSPP/linux/issues/219
Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.htmlSigned-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/YzIeJeqU73G+UI8g@workSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We are going to clean up matrix_keymap.h from unnecessary includes,
so the driver needs to include API that it uses directly.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220923194738.927408-5-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We are going to clean up matrix_keymap.h from unnecessary includes,
so the driver needs to include API that it uses directly.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220923194738.927408-4-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We are going to clean up matrix_keymap.h from unnecessary includes,
so the driver needs to include API that it uses directly.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220923194738.927408-3-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We are going to clean up matrix_keymap.h from unnecessary includes,
so the driver needs to include API that it uses directly.

Also let's sort includes alphabetically.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220923194738.927408-2-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We are going to clean up matrix_keymap.h from unnecessary includes,
so the driver needs to include API that it uses directly.

Also let's sort includes alphabetically and drop unneeded irq.h
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220923194738.927408-1-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The double `from' is duplicated in the comment, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Link: https://lore.kernel.org/r/20220804120800.60415-1-wangborong@cdjrlc.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Convert the PM8xxx PMIC Vibrator bindings to dt-schema.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220917155705.2284-1-luca@z3ntu.xyzSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Legacy or non DT boot is no longer possible on systems where the
tw4030/5030 is used.

Drop the support for handling legacy pdata.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20220616153323.29464-1-peter.ujfalusi@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Since intertouch was enabled for the T14 and P14s AMD G1 laptops there
have been a number of reports of touchpads not working well.

Debugging this with Synaptics they noted that intertouch should not be
enabled as SMBUS host notify is not available on these laptops.

Reverting the previous commit (e4ce4d3a)
to restore functionality back to what it was.

Note - we are working with Synaptics to see if there is a better
solution, but nothing is confirmed as yet.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220920193936.8709-1-markpearson@lenovo.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Each call to device/fwnode_get_named_child_node() must be matched
with a call to fwnode_handle_put() once the corresponding node is
no longer in use. This ensures a reference count remains balanced
in the case of dynamic device tree support.

Currently, the driver never calls fwnode_handle_put(). This patch
adds the missing calls.

Fixes: ce1cb0ee ("input: keyboard: Add support for Azoteq IQS620A/621/622/624/625")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/YyYbYvlkq5cy55dc@nixie71Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>