Whilst fairly unlikely anyone will ever use this driver with anything
other than DT, we are trying to move IIO over to the generic interfaces
where easy to do so.

In this case this involved moving to generic check on presence
of fwnode, generic device_get_match_data() and dropping the of_match_ptr
protection.  Also relevant header changes to have property.h and
mod_devicetable.h only.

Also drop the casting away of a const in favour of retaining
the const throughout.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Quentin Schulz <quentin.schulz@bootlin.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

This fixes some typos found while browsing the documentation.

Cc: trivial@kernel.org
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Update email to author's current employer
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

We have no known users of these in the wild.
it seems very unlikely these are real IDs having the form ADCXXXX
as that ID is owned by Achnor Datacomm not TI.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

I'm trying to clean this (now) anti-pattern out of IIO to avoid
cut and paste into new drivers.

Also add an include of mod_devicetable.h as the driver directly uses
struct of_device_id which is defined in there.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>

There is no real advantage in having these protections and
for parts that do not have an explicit ACPI ID, it prevents the
use of PRP0001. I'm trying to clear this out of IIO in general
to avoid copying in new drivers.

Include mod_devicetable.h as we are using of_device_id in here so
including that header is best practice.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Angelo Compagnucci <angelo.compagnucci@gmail.com>

This driver cannot be instantiated from ACPI due to it's use of
syscon_regmap_lookup_by_phandle() but in the interests of clearing
this anti pattern out of IIO, let us switch to an explicit
check in Kconfig and remove the protections on the of_match_table
The switch of header is because we only use of_device_id
in here and that is defined in mod_devicetable.h not of.h.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

The driver currently only allows channel 0 to be powered down but the
multi-channel variants of the hardware allow each channel to be powered
down separately and with separate power down modes.  Add support for
this.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Acked-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add device tree bindings for HDC2010/HDC2080 family of humidity and
temperature sensors.
Signed-off-by: Eugene Zaikonnikov <ez@norphonic.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add driver support for HDC2010/2080 series devices and sysfs
documentation for their heater element.

HDC2010 is an integrated high-accuracy humidity and temperature sensor
with very low power consumption. The device includes a resistive heating
element. The temperature range is -40C to 125C with 0.2C
accuracy. Humidity measurement is 0 to 100% with 2% RH accuracy.
Signed-off-by: Eugene Zaikonnikov <ez@norphonic.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

We shouldn't need to set default irq trigger flags here as the firmware
should have properly indicated the trigger type, i.e. level low, in the
DT or ACPI tables.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Enable the main power supply (vdd) and digital IO power supply (svdd)
during probe so that the i2c communication and device works properly on
boards that aggressively power gate these supplies.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This struct member isn't used. Drop it.

Fixes: 72ad02b1 ("iio: Add SEMTECH SX9310/9311 sensor driver")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Daniel Campello <campello@chromium.org>
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Miscellaneous format fixes throughout the whole file.
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Improves readability by storing &client->dev in a local variable.
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Checks for non-zero return values to signal error conditions.
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Fixes wrong copyright year.
Signed-off-by: Daniel Campello <campello@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Simplify compensation stage by using regmap_read_poll_timeout().
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Uses for_each_set_bit() macro to loop over channel bitmaps.
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Makes use __aligned(8) to ensure that the timestamp is correctly aligned
when we call io_push_to_buffers_with_timestamp().
Also makes use of sizeof() for regmap_bulk_read instead of static value.
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Uses .probe_new in place of .probe. Also uses device_get_match_data()
for whoami matching.
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Avoids unused warnings due to acpi/of table macros.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Fixes enable/disable irq handling at various points. The driver needs to
only enable/disable irqs if there is an actual irq handler installed.
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Follows spec sheet for macro declarations.
Signed-off-by: Daniel Campello <campello@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Adds device tree bindings for sx9310 sensor.
Signed-off-by: Daniel Campello <campello@chromium.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Rob Herring <robh+dt@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
[swboyd@chromium.org: Add both regulators and make them optional]
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Simple device with a simple conversion.  Special handling needed
for the max1118 which is the only supported part that has an external
reference voltage.

Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>

Support for AMS AS73211 JENCOLOR(R) Digital XYZ Sensor.

This driver has no built-in trigger. In order for making triggered
measurements, an external (software) trigger driver like
iio-trig-hrtimer or iio-trig-sysfs is required.

The sensor supports single and continuous measurement modes. The latter
is not used by design as this would require tight timing synchronization
between hardware and driver without much benefit.

Datasheet: https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdfSigned-off-by: Christian Eggers <ceggers@arri.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add DT bindings for AMS AS73211 XYZ True Color Sensor.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Remove excess blank line after variable declarations.
Improves code consistency and readability.
Change suggested by checkpatch.pl:

CHECK: Please don't use multiple blank lines
Signed-off-by: Calvin Glisson <taragaram@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Drop the repeated word "and" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Straight forward conversion of this binding for this
current sense amplifier and ADC.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Rob Herring <robh@kernel.org>

Straight forward conversion for this SPI ADC.
Added limits on spi-max-frequency from datasheet (0.1 to 4.8MHz)
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Rob Herring <robh@kernel.org>

Add devicetree binding document for ADXRS290, a dual-axis MEMS gyroscope.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

ADXRS290 is a high performance MEMS pitch and roll (dual-axis in-plane)
angular rate sensor (gyroscope) designed for use in stabilization
applications. It also features an internal temperature sensor and
programmable high-pass and low-pass filters.

Add support for ADXRS290 in direct-access mode for now.

Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXRS290.pdfReviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Added a missing comma and changed 'it it useful' to 'it is useful'.
Signed-off-by: Ankit Baluni <b18007@students.iitmandi.ac.in>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Make sure that the trigger function stubs are all static inline.
Otherwise we might see compiler warnings about declared but unused
functions.

Fixes 77712e5f: ("Staging: iio: Staticise non-exported functions")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Cc: devicetree@vger.kernel.org
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The change is mostly cosmetic. When looking into the menuconfig help of the
ad8366 driver, the HMC1119 chip should also show up (since the driver
supports it).
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The driver does not have a struct of_device_id table, but supported
devices are registered via Device Trees. This patch adds OF device ID
table.
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The change is mostly stylistic. The table should be indented with tabs
instead of spaces.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>