* next/arm64:
  arm64: defconfig: enable rockchip graphics
  arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl
  arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
  arm64: defconfig: add recently added crypto drivers as modules
  arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG
  arm64: defconfig: Enable CONFIG_WQ_POWER_EFFICIENT_DEFAULT
  arm64: defconfig: enable DMA driver for hi3660
  arm64: defconfig: enable OP-TEE
  arm64: defconfig: enable support for serial port connected device
  arm64: defconfig: enable CONFIG_SYSCON_REBOOT_MODE
  arm64: defconfig: enable support hi6421v530 PMIC
  arm64: defconfig: enable Kirin PCIe
  arm64: defconfig: enable SCSI_HISI_SAS_PCI
  arm64: defconfig: Enable REGULATOR_AXP20X
  arm64: defconfig: Enable MFD_AXP20X_RSB
  arm64: select PINCTRL for ZTE platform
  arm64: defconfig: enable fine-grained task level IRQ time accounting
  arm64: defconfig: compile ak4613 and renesas sound as modules
  arm64: defconfig: enable nop-xceiv PHY driver

* next/cleanup:
  soc: versatile: remove unnecessary static in realview_soc_probe()
  ARM: Convert to using %pOF instead of full_name
  ARM: hisi: Fix typo in comment
  ARM: OMAP4+: PRM: fix of_irq_get() result checks
  ARM: OMAP3+: PRM: fix of_irq_get() result check
  ARM: dts: dra72-evm-revc: workaround incorrect DP83867 RX_CTRL pin strap
  ARM: dts: dra71-evm: workaround incorrect DP83867 RX_CTRL pin strap
  ARM: OMAP2+: omap_device: drop broken RPM status update from suspend_noirq
  bus: omap-ocp2scp: Fix error handling in omap_ocp2scp_probe

Enable the graphics-related options needed by Rockchip boards.
This includes the pwm-backlight which will be needed by the internal
displays used on Gru Chrome-devices.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Mark yao <mark.yao@rock-chips.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Add Robert Richter as the primary maintainer for this platform.
Signed-off-by: Jayachandran C <jnair@caviumnetworks.com>
Signed-off-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v4.14-rockchip-soc32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/soc

Pull "second round of Rockchip soc32 changes for 4.14" from Heiko Stübner:

Enable the ARCH_DMA_ADDR_T_64BIT kconfig option for LPAE builds,
as some peripherals like the Mali gpu do support 64bit dma addresses.

* tag 'v4.14-rockchip-soc32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: rockchip: select ARCH_DMA_ADDR_T_64BIT for LPAE

Merge tag 'samsung-soc-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc

Pull "Samsung mach/soc changes for v4.14, part 2" from Krzysztof Kozłowski:

Fix NAND ECC mode for mini2440 board.

* tag 'samsung-soc-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: s3c24xx: Fix NAND ECC mode for mini2440 board

After commit e9f66ae2 ("mtd: s3c2410: make ecc mode configurable via
platform data") booting of the mini2440 board is broken, since
for this board we have CONFIG_MTD_NAND_S3C2410_HWECC set. The console
gets flooded with errors reported by the mtd subsystem.
This patch changes ecc_mode to NAND_ECC_HW which restores proper
operation of the NAND flash memory.

Cc: Sergio Prado <sergio.prado@e-labworks.com>
Fixes: e9f66ae2 ("mtd: s3c2410: make ecc mode configurable via platform data")
Signed-off-by: Sylwester Nawrocki <snawrocki@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Merge tag 'sunxi-config64-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/arm64

Pull "Allwinner arm64 defconfig changes for 4.14" from Chen-Yu Tsai:

Enable X-Powers AXP series PMIC mfd and regulator support by default.

* tag 'sunxi-config64-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: defconfig: Enable REGULATOR_AXP20X
  arm64: defconfig: Enable MFD_AXP20X_RSB

Merge tag 'omap-for-v4.14/fixes-not-urgent-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

Pull "non-urgent fixes for omaps for v4.14" from Tony Lindgren:

Non-urgent fixes for omaps for v4.14 merge window. These all
can wait for the merge window as we have not seemed to hit
any of these so far:

- Fix error handling in omap_ocp2scp_probe affecting runtime
  PM error path

- Drop broken RPM status update for omap_device

- Two fixes for of_irq_get() usage that can return 0

* tag 'omap-for-v4.14/fixes-not-urgent-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP4+: PRM: fix of_irq_get() result checks
  ARM: OMAP3+: PRM: fix of_irq_get() result check
  ARM: OMAP2+: omap_device: drop broken RPM status update from suspend_noirq
  bus: omap-ocp2scp: Fix error handling in omap_ocp2scp_probe

Merge tag 'qcom-arm64-defconfig-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/arm64

Pull "Qualcomm ARM64 Based defconfig Updates for v4.14" from Andy Gross:

* Enable Qualcomm IPQ8074 clocks and pinctrl

* tag 'qcom-arm64-defconfig-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl

Merge tag 'zte-soc-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/arm64

Pull "ZTE SoC updates for 4.14" from Shawn Guo:

 - Select PINCTRL for ZTE platform, so that pinctrl driver for ZX296718
   can be enabled.

* tag 'zte-soc-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: select PINCTRL for ZTE platform

Pull "Broadcom defconfig-arm64 changes for 4.14" from Florian Fainelli:

This pull request contains ARM64 defconfig changes for Broadcom ARM64-based
SoCs for 4.14, please pull the following:

- Markus enables the Broadcom STB AVS thermal monitoring driver as a module
  which is currently queued in Rui Zhang's tree

* tag 'arm-soc/for-4.14/defconfig-arm64' of http://github.com/Broadcom/stblinux:
  arm64: defconfig: add CONFIG_BRCMSTB_THERMAL

Merge tag 'tegra-for-4.14-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc

Pull "ARM: tegra: Changes for v4.14-rc1" from Thierry Reding:

Contains a single fix for platforms with more than 2 GiB of memory
running on a kernel with LPAE enabled.

* tag 'tegra-for-4.14-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Select appropriate DMA options for LPAE

These configs are required for booting kernel in QCOM
IPQ8074 boards.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

Merge tag 'v4.14-rockchip-soc32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/soc

Pull "Rockchip soc32 changes for 4.14" from Heiko Stübner:

32bit arch changes for Rockchip socs containing enablement for ZONE_DMA
for LPAE builds due to the peripherals only being 32bit capable
and conversion to the exclusive reset controls in smp code.

* tag 'v4.14-rockchip-soc32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: rockchip: enable ZONE_DMA for non 64-bit capable peripherals
  ARM: rockchip: explicitly request exclusive reset control in smp code

Merge tag 'gemini-for-arm-soc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/soc

Pull "Gemini changes for v4.14" from Linus Walleij:

They all deal with fixing up the Kconfig selects
for misc stuff that has been merged in different
subsystems:

- We have a reset controller
- We have a clock controller
- We need ARM_AMBA for FTDMAC020 which is PL08x
- We need to select the pin controller (being merged
  for v4.14)

* tag 'gemini-for-arm-soc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: gemini: select pin controller
  ARM: gemini: select ARM_AMBA
  ARM: gemini: select the clock controller
  ARM: gemini: tag the arch as having reset controller

Pull "mvebu soc for 4.14 (part 1)" from Gregory CLEMENT:

Enabling ARM_GLOBAL_TIMER in mvebu_v7_defconfig for Armada 38x

* tag 'mvebu-soc-4.14-1' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: enable ARM_GLOBAL_TIMER compilation Armada 38x platforms

Update ARM/ZTE entry to include all those ZTE ZX platform drivers and
files that do not have a separate MAINTAINERS entry.

Since I have been contributing a lot for ZTE ZX SoCs support and
collecting platform patches for a few cycles, add myself as one
maintainer for the platform.

Cc: Jun Nie <jun.nie@linaro.org>
Cc: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v4.14/debug-ll-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Pull "Updates to for omap debug_ll code to use generic DEBUG_UART_8250 code" from Tony Lindgren:

The legacy code to try to detect the debug_ll uart based on machine
is no longer needed, and we can remove it. Note that the Kconfig
options stay the same, we just need to define the port configuration
now.

* tag 'omap-for-v4.14/debug-ll-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: debug: Use generic 8250 debug_ll for am3517 and am335x
  ARM: debug: Use generic 8250 debug_ll for ti81xx
  ARM: debug: Use generic 8250 debug_ll for omap3/4/5
  ARM: debug: Use generic 8250 debug_ll for omap2 and omap3/4/5 common uarts

Merge tag 'omap-for-v4.14/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Pull "soc changes for omaps for v4.14" from Tony Lindgren:

SoC updates for omaps for v4.14. Most of the chages are to add
support for new dra762 SoC. The other changes are are for legacy
DMA code removal, and MMC quirk and iodelay config for dra7.

* tag 'omap-for-v4.14/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP: dra7: powerdomain data: Register SoC specific powerdomains
  ARM: dra762: Enable SMP for dra762
  ARM: dra7: hwmod: Register dra76x specific hwmod
  ARM: dra762: Add support for device identification
  ARM: OMAP2+: board-generic: add support for dra762 family
  ARM: OMAP2+: Select PINCTRL_TI_IODELAY for SOC_DRA7XX
  ARM: OMAP2+: Add pdata-quirks for MMC/SD on DRA74x EVM
  ARM: OMAP2+: Remove unused legacy code for DMA

Merge tag 'renesas-soc-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Pull "Renesas ARM Based SoC Updates for v4.14" Simon Horman:

* Add debug-ll support to RZ/G1M (r8a7743) SoC

  Chris Paterson says, "RZ/G1M uses SCIF0 for the debug console, like most
  of the R-Car Gen2 SoCs."

* Remove ARCH_SHMOBILE_MULTI

  Geert Uytterhoeven says, "The migration from ARCH_SHMOBILE_MULTI to
  ARCH_RENESAS has been completed in v4.12..."

* Correct arch timer frequency on RZ/G1M (r8a7743) SoC

  Geert Uytterhoeven says, "According to the datasheet, the frequency of
  the ARM architecture timer on RZ/G1E depends on the frequency of the ZS
  clock..."

* Add support for CPG/MSSR bindings

  Geert Uytterhoeven says, "When using the new CPG/MSSR bindings, there is
  no longer a "renesas,rcar-gen2-cpg-clocks" node, and the code to obtain
  the external clock crystal frequency falls back to a default of 20 MHz.
  While this is correct for all upstream R-Car Gen2 and RZ/G1 boards, this
  is not necessarily the case for out-of-tree third party boards.

  Add support for finding the external clock crystal oscillator on RZ/G1M,
  and on R-Car H2, M2-W, and M2-N using the new CPG/MSSR bindings, through
  the corresponding "renesas,r8a77xx-cpg-mssr" nodes."

* Obtain jump stub region from DT

  Geert Uytterhoeven says, "Add support for obtaining from DT the SRAM
  region to store the jump stub for CPU core bringup, according to the
  renesas,smp-sram DT bindings."

* tag 'renesas-soc-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: Remove ARCH_SHMOBILE_MULTI
  ARM: shmobile: rcar-gen2: Correct arch timer frequency on RZ/G1E
  ARM: shmobile: rcar-gen2: Add support for CPG/MSSR bindings
  ARM: shmobile: rcar-gen2: Obtain jump stub region from DT
  ARM: debug-ll: Add support for r8a7743

Remove unnecessary static on local variables syscon_regmap.
Such variables are initialized before being used, on every
execution path throughout the functions. The static has no
benefit and, removing it reduces the object file size.

This issue was detected using Coccinelle and the following
semantic patch:

@bad exists@
position p;
identifier x;
type T;
@@

static T x@p;
...
x = <+...x...+>

@@
identifier x;
expression e;
type T;
position p != bad.p;
@@

-static
 T x@p;
 ... when != x
     when strict
?x = e;

In the following log you can see the difference in the object file size.
This log is the output of the size command, before and after the code
change:

before:
   text    data     bss     dec     hex filename
   3339    2104     128    5571    15c3 drivers/soc/versatile/soc-realview.o

after:
   text    data     bss     dec     hex filename
   3321    2048      64    5433    1539 drivers/soc/versatile/soc-realview.o
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v4.14/fixes-not-urgent-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

Pull "non-urgent dts fixes for omaps for v4.14" from Tony Lindgren:

Two non-urgent dts fixes for dra7 Ethernet quirk. These are sent
separately from the rest of the dts changes to avoid merge conflicts
as these depend on earlier fixes sent during v4.13-rc cycle.

* tag 'omap-for-v4.14/fixes-not-urgent-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: dra72-evm-revc: workaround incorrect DP83867 RX_CTRL pin strap
  ARM: dts: dra71-evm: workaround incorrect DP83867 RX_CTRL pin strap

Pull "ARM: hisi fixes for 4.14" from Wei Xu:

- Fix the comment typo of the machine code "0xe51ff004"
  to avoid confusion.

* tag 'hisi-fixes-for-4.14' of git://github.com/hisilicon/linux-hisi:
  ARM: hisi: Fix typo in comment

Pull "ADC device support for Cirrus Logic EP93xx SoC" from Alexander Sverdlin:

- Add ADC specific clock
- Add ADC device support to EP93xx core
- Add ADC instance to EDB93xx boards

The above doesn't include a driver for ADC device.

* tag 'arm-ep93xx-adc' of https://github.com/sverdlin/linux:
  ARM: edb93xx: Add ADC platform device
  ARM: ep93xx: Add ADC platform device support to core
  ARM: ep93xx: Add ADC clock

Merge tag 'samsung-soc-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc

Pull "Samsung mach/soc changes for v4.14" from Krzysztof Kozłowski:

Only for S3C24xx platform:
1. Cleanup from non-existent CONFIG entries.
2. Fix unmet NET dependency when H1940 bluetooth chip is selected..

* tag 'samsung-soc-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: s3c24xx: make H1940BT depend on RFKILL
  ARM: s3c24xx: Do not confuse local define with Kconfig
  ARM: s3c24xx: Remove non-existing SND_SOC_SMDK2443_WM9710
  ARM: s3c24xx: Remove non-existing CONFIG_CPU_S3C2413

The machine code "0xe51ff004" means "ldr pc, [pc, #-4]".
This patch fixed the comment typo to avoid any confusion.
Signed-off-by: Yunzhi Li <yunzhi.li@deephi.tech>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Turn on CONFIG_BRCMSTB_THERMAL as module.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Pull "ARM64: hisilicon: defconfig updates for 4.14" from Wei Xu:

- Enable Kirin PCIe host, hi6421v530 mfd and regulator,
  syscon reboot mode, serdev bus, OP-TEE and K3 DMA support
  for hikey and hikey960

- Enable pcie based sas controller support for hip08 SoC

* tag 'hisi-defconfig-for-4.14' of git://github.com/hisilicon/linux-hisi:
  arm64: defconfig: enable DMA driver for hi3660
  arm64: defconfig: enable OP-TEE
  arm64: defconfig: enable support for serial port connected device
  arm64: defconfig: enable CONFIG_SYSCON_REBOOT_MODE
  arm64: defconfig: enable support hi6421v530 PMIC
  arm64: defconfig: enable Kirin PCIe
  arm64: defconfig: enable SCSI_HISI_SAS_PCI

Add the arm64 crypto drivers that have been added over the past
couple of kernel releases to its defconfig as modules.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull "mvebu arm64 for 4.14 (part 1)" from Gregory CLEMENT:

Enabling nop-xceiv PHY driver in the defconfig, needed for USB support
on A8K SoC based board.

Enabling fine-grained task level IRQ time accounting for ARMv8 as it was
already done for x86

* tag 'mvebu-arm64-4.14-1' of git://git.infradead.org/linux-mvebu:
  arm64: defconfig: enable fine-grained task level IRQ time accounting
  arm64: defconfig: enable nop-xceiv PHY driver

Enable the watchdog driver for UniPhier SoC
Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-arm64-defconfig-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/arm64

Pull "Renesas ARM64 Based SoC Defconfig Updates for v4.14" from Simon Horman:

* compile ak4613 and renesas sound as modules

  This is intended to reduce the size of a kernel image compiled
  using the defconfig. This is timely as it brings the kernel image
  back below the size that can be booted in my environment, a limit
  it crept over in v4.13-rc1.

* tag 'renesas-arm64-defconfig-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: defconfig: compile ak4613 and renesas sound as modules

commit cee22a15 ("workqueues: Introduce new flag WQ_POWER_EFFICIENT
for power oriented workqueues") introduced the concept of power
efficient workqueues (4 years back), but it was never enabled in
upstream kernel configs.

Power efficient workqueues are simply marked as "unbound," so that jobs
queued to them can run on any CPU in the system. It leaves the target
CPU selection to the scheduler, which is the best place for such
decision making. This improves power efficiency for workqueues which are
otherwise pinned to a CPU.

Enable it for ARM64 platforms as ARM platforms were the main target for
the introduction of power efficient workqueues.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

of_irq_get() may return 0 as well as a nagative error number on failure,
(and never on success), however omap44xx_prm_late_init() regards 0 as a
valid IRQ -- fix this.

Fixes: a8f83aef ("ARM: OMAP4+: PRM: register interrupt information from DT")
Fixes: c5b39558 ("ARM: OMAP4: Fix legacy code clean-up regression")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

of_irq_get() may return 0 as well as a nagative error number on failure
(and never on success), however omap3xxx_prm_late_init() regards 0 as a
valid IRQ -- fix this.

Fixes: 1e037794 ("ARM: OMAP3+: PRM: register interrupt information from DT")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Custom efuse powerdomain is always on in dra72 ES2.0
and dra76 SoCs. So register it as aon for these SoCs.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

smp specific routines are called based on soc_is_*() api in omap-smc.c.
Add soc_is_dra76x() to the condition so that smp specific routines are
called for dra76 SoC.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Certain IPs are available on dra76 which are not present
either in dra74 or dra72. So add provision to register dra76
specific IPs separately.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>