- 11 Mar, 2014 4 commits
-
-
Giuseppe CAVALLARO authored
This patch is to disable the EEE (so HW and timers) for example when the phy communicates that the EEE can be supported anymore. Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Neil Horman authored
vmxnet3's netpoll driver is incorrectly coded. It directly calls vmxnet3_do_poll, which is the driver internal napi poll routine. As the netpoll controller method doesn't block real napi polls in any way, there is a potential for race conditions in which the netpoll controller method and the napi poll method run concurrently. The result is data corruption causing panics such as this one recently observed: PID: 1371 TASK: ffff88023762caa0 CPU: 1 COMMAND: "rs:main Q:Reg" #0 [ffff88023abd5780] machine_kexec at ffffffff81038f3b #1 [ffff88023abd57e0] crash_kexec at ffffffff810c5d92 #2 [ffff88023abd58b0] oops_end at ffffffff8152b570 #3 [ffff88023abd58e0] die at ffffffff81010e0b #4 [ffff88023abd5910] do_trap at ffffffff8152add4 #5 [ffff88023abd5970] do_invalid_op at ffffffff8100cf95 #6 [ffff88023abd5a10] invalid_op at ffffffff8100bf9b [exception RIP: vmxnet3_rq_rx_complete+1968] RIP: ffffffffa00f1e80 RSP: ffff88023abd5ac8 RFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff88023b5dcee0 RCX: 00000000000000c0 RDX: 0000000000000000 RSI: 00000000000005f2 RDI: ffff88023b5dcee0 RBP: ffff88023abd5b48 R8: 0000000000000000 R9: ffff88023a3b6048 R10: 0000000000000000 R11: 0000000000000002 R12: ffff8802398d4cd8 R13: ffff88023af35140 R14: ffff88023b60c890 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff88023abd5b50] vmxnet3_do_poll at ffffffffa00f204a [vmxnet3] #8 [ffff88023abd5b80] vmxnet3_netpoll at ffffffffa00f209c [vmxnet3] #9 [ffff88023abd5ba0] netpoll_poll_dev at ffffffff81472bb7 The fix is to do as other drivers do, and have the poll controller call the top half interrupt handler, which schedules a napi poll properly to recieve frames Tested by myself, successfully. Signed-off-by:Neil Horman <nhorman@tuxdriver.com> CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: "David S. Miller" <davem@davemloft.net> CC: stable@vger.kernel.org Reviewed-by:
Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by:
-
Peter Boström authored
With TX VLAN offload enabled the source MAC address for frames sent using the VLAN interface is currently set to the address of the real interface. This is wrong since the VLAN interface may be configured with a different address. The bug was introduced in commit 2205369a ("vlan: Fix header ops passthru when doing TX VLAN offload."). This patch sets the source address before calling the create function of the real interface. Signed-off-by:
Peter Boström <peter.bostrom@netrounds.com> Signed-off-by:
-
Annie Li authored
Current netback uses gso_type to check whether the skb contains gso offload, and this is wrong. Gso_size is the right one to check gso existence, and gso_type is only used to check gso type. Some skbs contains nonzero gso_type and zero gso_size, current netback would treat these skbs as gso and create wrong response for this. This also causes ssh failure to domu from other server. V2: use skb_is_gso function as Paul Durrant suggested Signed-off-by:
Annie Li <annie.li@oracle.com> Acked-by:
Wei Liu <wei.liu2@citrix.com> Reviewed-by:
Paul Durrant <paul.durrant@citrix.com> Signed-off-by:
-
- 10 Mar, 2014 4 commits
-
-
Eric Dumazet authored
Resizing fq hash table allocates memory while holding qdisc spinlock, with BH disabled. This is definitely not good, as allocation might sleep. We can drop the lock and get it when needed, we hold RTNL so no other changes can happen at the same time. Signed-off-by:
Eric Dumazet <edumazet@google.com> Fixes: afe4fd06 ("pkt_sched: fq: Fair Queue packet scheduler") Signed-off-by:
-
Ben Hutchings authored
udelay() does not work on some architectures for values above 2000, in particular on ARM: ERROR: "__bad_udelay" [drivers/net/ethernet/brocade/bna/bna.ko] undefined! Reported-by:
Vagrant Cascadian <vagrant@debian.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Eric Dumazet authored
The WARN_ON(root == &noop_qdisc)) added in qdisc_list_add() can trigger in normal conditions when devices are not up. It should be done only right before the list_add_tail() call. Fixes: e57a784d ("pkt_sched: set root qdisc before change() in attach_default_qdiscs()") Reported-by:
Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by:
Mirco Tischler <mt-ml@gmx.de> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John W. Linville says: ==================== Please pull this batch of fixes intende for the 3.14 stream... For the mac80211 bits, Johannes says: "Here I have a fix from Eliad for the minimal channel width calculation in the mac80211 code which lead to monitor mode not working at all for drivers using that. One of my fixes is for an issue noticed by Michal, we clear an already cleared value but do it without locking, so just remove that. The other is for a data leak - we leak two bytes of kernel memory out over the air in QoS NULL frames because those don't get a sequence number assigned in the TX path." For the iwlwifi bits, Emmanuel says: "One more fix and an update for device IDs. There is a bugzilla reported for the fix which is mentioned in the commit message." Along with those... Amitkumar Karwar provides two mwifiex fixes, both correcting some data transcription problems. Ivaylo Dimitrov uses skb_trim in the wl1251 driver to avoid HAVE_EFFICIENT_UNALIGNED_ACCESS problems. ==================== Signed-off-by:
-
- 09 Mar, 2014 1 commit
-
-
Michael Chan authored
The pci shutdown handler added in: bnx2: Add pci shutdown handler commit 25bfb1dd created a shutdown down sequence without chip reset if the device was never brought up. This can cause the firmware to shutdown the PHY prematurely and cause MMIO read cycles to be unresponsive. On some systems, it may generate NMI in the bnx2's pci shutdown handler. The fix is to tell the firmware not to shutdown the PHY if there was no prior chip reset. Signed-off-by:Michael Chan <mchan@broadcom.com> Signed-off-by:
-
- 07 Mar, 2014 1 commit
-
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
- 06 Mar, 2014 30 commits
-
-
Sabrina Dubroca authored
DST_NOCOUNT should only be used if an authorized user adds routes locally. In case of routes which are added on behalf of router advertisments this flag must not get used as it allows an unlimited number of routes getting added remotely. Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Amir Vadai authored
Currently, the PF call to pci_enable_sriov from the PF probe function stalls for 10 seconds times the number of VFs probed on the host. This happens because the way for such VFs to determine of the PF initialization finished, is by attempting to issue reset on the comm-channel and get timeout (after 10s). The PF probe function is called from a kenernel workqueue, and therefore during that time, rcu lock is being held and kernel's workqueue is stalled. This blocks other processes that try to use the workqueue or rcu lock. For example, interface renaming which is calling rcu_synchronize is blocked, and timedout by systemd. Changed mlx4_init_slave() to allow VF probed on the host to immediatly detect that the PF is not ready, and return EPROBE_DEFER instantly. Only when the PF finishes the initialization, allow such VFs to access the comm channel. This issue and fix are relevant only for probed VFs on the hypervisor, there is no way to pass this information to a VM until comm channel is ready, so in a VM, if PF is not ready, the first command will be timedout after 10 seconds and return EPROBE_DEFER. Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Amir Vadai authored
Fix a regression introduced by [1]. outbox was accessed instead of outbox->buf. Typo was copy-pasted to [2] and [3]. [1] - cc1ade9 mlx4_core: Disable memory windows for virtual functions [2] - 4de65803 mlx4_core: Add support for steerable IB UD QPs [3] - 7ffdf726 net/mlx4_core: Add basic support for TCP/IP offloads under tunneling Signed-off-by:
-
Sasha Levin authored
We didn't correctly check cases where the value for lp_interval is not within the legal range due to a missing table terminator. This would let userspace trigger a kernel panic by specifying a value out of range: echo -1 > /sys/devices/virtual/net/bond0/bonding/lp_interval Introduced by commit 4325b374 ("bonding: convert lp_interval to use the new option API"). Acked-by:
Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Anton Nayshtut authored
Without this fix, ipv6_exthdrs_offload_init doesn't register IPPROTO_DSTOPTS offload, but returns 0 (as the IPPROTO_ROUTING registration actually succeeds). This then causes the ipv6_gso_segment to drop IPv6 packets with IPPROTO_DSTOPTS header. The issue detected and the fix verified by running MS HCK Offload LSO test on top of QEMU Windows guests, as this test sends IPv6 packets with IPPROTO_DSTOPTS. Signed-off-by:
Anton Nayshtut <anton@swortex.com> Signed-off-by:
-
Anton Blanchard authored
The code to load a MAC address into a u64 for passing to the hypervisor via a register is broken on little endian. Create a helper function called ibmveth_encode_mac_addr which does the right thing in both big and little endian. We were storing the MAC address in a long in struct ibmveth_adapter. It's never used so remove it - we don't need another place in the driver where we create endian issues with MAC addresses. Signed-off-by:
Anton Blanchard <anton@samba.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Anton Blanchard authored
The unix socket code is using the result of csum_partial to hash into a lookup table: unix_hash_fold(csum_partial(sunaddr, len, 0)); csum_partial is only guaranteed to produce something that can be folded into a checksum, as its prototype explains: * returns a 32-bit number suitable for feeding into itself * or csum_tcpudp_magic The 32bit value should not be used directly. Depending on the alignment, the ppc64 csum_partial will return different 32bit partial checksums that will fold into the same 16bit checksum. This difference causes the following testcase (courtesy of Gustavo) to sometimes fail: #include <sys/socket.h> #include <stdio.h> int main() { int fd = socket(PF_LOCAL, SOCK_STREAM|SOCK_CLOEXEC, 0); int i = 1; setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &i, 4); struct sockaddr addr; addr.sa_family = AF_LOCAL; bind(fd, &addr, 2); listen(fd, 128); struct sockaddr_storage ss; socklen_t sslen = (socklen_t)sizeof(ss); getsockname(fd, (struct sockaddr*)&ss, &sslen); fd = socket(PF_LOCAL, SOCK_STREAM|SOCK_CLOEXEC, 0); if (connect(fd, (struct sockaddr*)&ss, sslen) == -1){ perror(NULL); return 1; } printf("OK\n"); return 0; } As suggested by davem, fix this by using csum_fold to fold the partial 32bit checksum into a 16bit checksum before using it. Signed-off-by: -
Andrew Lutomirski authored
The original documentation was very unclear. The code fix is presumably related to the formerly unclear documentation: SOCK_TIMESTAMPING_RX_SOFTWARE has no effect on __sock_recv_timestamp's behavior, so calling __sock_recv_ts_and_drops from sock_recv_ts_and_drops if only SOCK_TIMESTAMPING_RX_SOFTWARE is set is pointless. This should have no user-observable effect. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Bjorn Helgaas authored
With -Werror=array-bounds, gcc v4.7.x warns that in phy_find_valid(), the settings[] "array subscript is above array bounds", I think because idx is a signed integer and if the caller supplied idx < 0, we pass the guard but still reference out of bounds. Fix this by making idx unsigned here and elsewhere. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Westphal authored
Quoting Alexander Aring: While fragmentation and unloading of 6lowpan module I got this kernel Oops after few seconds: BUG: unable to handle kernel paging request at f88bbc30 [..] Modules linked in: ipv6 [last unloaded: 6lowpan] Call Trace: [<c012af4c>] ? call_timer_fn+0x54/0xb3 [<c012aef8>] ? process_timeout+0xa/0xa [<c012b66b>] run_timer_softirq+0x140/0x15f Problem is that incomplete frags are still around after unload; when their frag expire timer fires, we get crash. When a netns is removed (also done when unloading module), inet_frag calls the evictor with 'force' argument to purge remaining frags. The evictor loop terminates when accounted memory ('work') drops to 0 or the lru-list becomes empty. However, the mem accounting is done via percpu counters and may not be accurate, i.e. loop may terminate prematurely. Alter evictor to only stop once the lru list is empty when force is requested. Reported-by:Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Reported-by:
Alexander Aring <alex.aring@gmail.com> Tested-by:
Florian Westphal <fw@strlen.de> Acked-by:
-
David S. Miller authored
Eric Hugne says: ==================== tipc: refcount and memory leak fixes v3: Remove error logging from data path completely. Rebased on top of latest net merge. v2: Drop specific -ENOMEM logging in patch #1 (tipc: allow connection shutdown callback to be invoked in advance) And add a general error message if an internal server tries to send a message on a closed/nonexisting connection. In addition to the fix for refcount leak and memory leak during module removal, we also fix a problem where the topology server listening socket where unexpectedly closed. We also eliminate an unnecessary context switch during accept()/recvmsg() for nonblocking sockets. It might be good to include this patchset in stable aswell. After the v3 rebase on latest merge from net all patches apply cleanly on that tree. ==================== Signed-off-by: -
Erik Hugne authored
Failure to schedule a TIPC tasklet with tipc_k_signal because the tasklet handler is disabled is not an error. It means TIPC is currently in the process of shutting down. We remove the error logging in this case. Signed-off-by:
Erik Hugne <erik.hugne@ericsson.com> Reviewed-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Erik Hugne authored
When the TIPC module is removed, the tasklet handler is disabled before all other subsystems. This will cause lingering publications in the name table because the node_down tasklets responsible to clean up publications from an unreachable node will never run. When the name table is shut down, these publications are detected and an error message is logged: tipc: nametbl_stop(): orphaned hash chain detected This is actually a memory leak, introduced with commit 993b858e ("tipc: correct the order of stopping services at rmmod") Instead of just logging an error and leaking memory, we free the orphaned entries during nametable shutdown. Signed-off-by:
-
Erik Hugne authored
When a topology server subscriber is disconnected, the associated connection id is set to zero. A check vs zero is then done in the subscription timeout function to see if the subscriber have been shut down. This is unnecessary, because all subscription timers will be cancelled when a subscriber terminates. Setting the connection id to zero is actually harmful because id zero is the identity of the topology server listening socket, and can cause a race that leads to this socket being closed instead. Signed-off-by:
Ying Xue <ying.xue@windriver.com> Reviewed-by:
-
Ying Xue authored
When messages are received via tipc socket under non-block mode, schedule_timeout() is called in tipc_wait_for_rcvmsg(), that is, the process of receiving messages will be scheduled once although timeout value passed to schedule_timeout() is 0. The same issue exists in accept()/wait_for_accept(). To avoid this unnecessary process switch, we only call schedule_timeout() if the timeout value is non-zero. Signed-off-by:
-
Ying Xue authored
When tipc_conn_sendmsg() calls tipc_conn_lookup() to query a connection instance, its reference count value is increased if it's found. But subsequently if it's found that the connection is closed, the work of sending message is not queued into its server send workqueue, and the connection reference count is not decreased. This will cause a reference count leak. To reproduce this problem, an application would need to open and closes topology server connections with high intensity. We fix this by immediately decrementing the connection reference count if a send fails due to the connection being closed. Signed-off-by:
-
Ying Xue authored
Currently connection shutdown callback function is called when connection instance is released in tipc_conn_kref_release(), and receiving packets and sending packets are running in different threads. Even if connection is closed by the thread of receiving packets, its shutdown callback may not be called immediately as the connection reference count is non-zero at that moment. So, although the connection is shut down by the thread of receiving packets, the thread of sending packets doesn't know it. Before its shutdown callback is invoked to tell the sending thread its connection has been closed, the sending thread may deliver messages by tipc_conn_sendmsg(), this is why the following error information appears: "Sending subscription event failed, no memory" To eliminate it, allow connection shutdown callback function to be called before connection id is removed in tipc_close_conn(), which makes the sending thread know the truth in time that its socket is closed so that it doesn't send message to it. We also remove the "Sending XXX failed..." error reporting for topology and config services. Signed-off-by:
-
Guillaume Nault authored
As pppol2tp_recv() never queues up packets to plain L2TP sockets, pppol2tp_recvmsg() never returns data to userspace, thus making the recv*() system calls unusable. Instead of dropping packets when the L2TP socket isn't bound to a PPP channel, this patch adds them to its reception queue. Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Guillaume Nault authored
Commit e0d4435f "l2tp: Update PPP-over-L2TP driver to work over L2TPv3" broke the PPPOL2TP_SO_SENDSEQ setsockopt. The L2TP header length was previously computed by pppol2tp_l2t_header_len() before each call to l2tp_xmit_skb(). Now that header length is retrieved from the hdr_len session field, this field must be updated every time the L2TP header format is modified, or l2tp_xmit_skb() won't push the right amount of data for the L2TP header. This patch uses l2tp_session_set_header_len() to adjust hdr_len every time sequencing is (de)activated from userspace (either by the PPPOL2TP_SO_SENDSEQ setsockopt or the L2TP_ATTR_SEND_SEQ netlink attribute). Signed-off-by:
-
Amitkumar Karwar authored
While preparing association request, intersection of device's VHT capability information and corresponding field advertised by AP is used. This patch fixes a couple errors while saving and copying vht_cap and vht_oper fields from AP's beacon. Cc: <stable@vger.kernel.org> # 3.9+ Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
While preparing association request, intersection of device's HT capability information and corresponding fields advertised by AP is used. This patch fixes an error while copying this field from AP's beacon. Cc: <stable@vger.kernel.org> Signed-off-by:
-
-
Haiyang Zhang authored
It moves the state setting for query into rndis_filter_receive_response(). All callbacks including query-complete and status-callback are synchronized by channel->inbound_lock. This prevents pentential race between them. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Soren Brinkmann authored
When allocating RX buffers a fixed size is used, while freeing is based on actually received bytes, resulting in the following kernel warning when CONFIG_DMA_API_DEBUG is enabled: WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:1051 check_unmap+0x258/0x894() macb e000b000.ethernet: DMA-API: device driver frees DMA memory with different size [device address=0x000000002d170040] [map size=1536 bytes] [unmap size=60 bytes] Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.0-rc3-xilinx-00220-g49f84081ce4f #65 [<c001516c>] (unwind_backtrace) from [<c0011df8>] (show_stack+0x10/0x14) [<c0011df8>] (show_stack) from [<c03c775c>] (dump_stack+0x7c/0xc8) [<c03c775c>] (dump_stack) from [<c00245cc>] (warn_slowpath_common+0x60/0x84) [<c00245cc>] (warn_slowpath_common) from [<c0024670>] (warn_slowpath_fmt+0x2c/0x3c) [<c0024670>] (warn_slowpath_fmt) from [<c0227d44>] (check_unmap+0x258/0x894) [<c0227d44>] (check_unmap) from [<c0228588>] (debug_dma_unmap_page+0x64/0x70) [<c0228588>] (debug_dma_unmap_page) from [<c02ab78c>] (gem_rx+0x118/0x170) [<c02ab78c>] (gem_rx) from [<c02ac4d4>] (macb_poll+0x24/0x94) [<c02ac4d4>] (macb_poll) from [<c031222c>] (net_rx_action+0x6c/0x188) [<c031222c>] (net_rx_action) from [<c0028a28>] (__do_softirq+0x108/0x280) [<c0028a28>] (__do_softirq) from [<c0028e8c>] (irq_exit+0x84/0xf8) [<c0028e8c>] (irq_exit) from [<c000f360>] (handle_IRQ+0x68/0x8c) [<c000f360>] (handle_IRQ) from [<c0008528>] (gic_handle_irq+0x3c/0x60) [<c0008528>] (gic_handle_irq) from [<c0012904>] (__irq_svc+0x44/0x78) Exception stack(0xc056df20 to 0xc056df68) df20: 00000001 c0577430 00000000 c0577430 04ce8e0d 00000002 edfce238 00000000 df40: 04e20f78 00000002 c05981f4 00000000 00000008 c056df68 c0064008 c02d7658 df60: 20000013 ffffffff [<c0012904>] (__irq_svc) from [<c02d7658>] (cpuidle_enter_state+0x54/0xf8) [<c02d7658>] (cpuidle_enter_state) from [<c02d77dc>] (cpuidle_idle_call+0xe0/0x138) [<c02d77dc>] (cpuidle_idle_call) from [<c000f660>] (arch_cpu_idle+0x8/0x3c) [<c000f660>] (arch_cpu_idle) from [<c006bec4>] (cpu_startup_entry+0xbc/0x124) [<c006bec4>] (cpu_startup_entry) from [<c053daec>] (start_kernel+0x350/0x3b0) ---[ end trace d5fdc38641bd3a11 ]--- Mapped at: [<c0227184>] debug_dma_map_page+0x48/0x11c [<c02ab32c>] gem_rx_refill+0x154/0x1f8 [<c02ac7b4>] macb_open+0x270/0x3e0 [<c03152e0>] __dev_open+0x7c/0xfc [<c031554c>] __dev_change_flags+0x8c/0x140 Fixing this by passing the same size which is passed during mapping the memory to the unmap function as well. Signed-off-by:
Soren Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by:
-
Soren Brinkmann authored
With CONFIG_DMA_API_DEBUG enabled the following warning is printed: WARNING: CPU: 0 PID: 619 at lib/dma-debug.c:1101 check_unmap+0x758/0x894() macb e000b000.ethernet: DMA-API: device driver failed to check map error[device address=0x000000002d171c02] [size=322 bytes] [mapped as single] Modules linked in: CPU: 0 PID: 619 Comm: udhcpc Not tainted 3.14.0-rc3-xilinx-00219-gd158fc7f #63 [<c001516c>] (unwind_backtrace) from [<c0011df8>] (show_stack+0x10/0x14) [<c0011df8>] (show_stack) from [<c03c7714>] (dump_stack+0x7c/0xc8) [<c03c7714>] (dump_stack) from [<c00245cc>] (warn_slowpath_common+0x60/0x84) [<c00245cc>] (warn_slowpath_common) from [<c0024670>] (warn_slowpath_fmt+0x2c/0x3c) [<c0024670>] (warn_slowpath_fmt) from [<c0228244>] (check_unmap+0x758/0x894) [<c0228244>] (check_unmap) from [<c0228588>] (debug_dma_unmap_page+0x64/0x70) [<c0228588>] (debug_dma_unmap_page) from [<c02aba64>] (macb_interrupt+0x1f8/0x2dc) [<c02aba64>] (macb_interrupt) from [<c006c6e4>] (handle_irq_event_percpu+0x2c/0x178) [<c006c6e4>] (handle_irq_event_percpu) from [<c006c86c>] (handle_irq_event+0x3c/0x5c) [<c006c86c>] (handle_irq_event) from [<c006f548>] (handle_fasteoi_irq+0xb8/0x100) [<c006f548>] (handle_fasteoi_irq) from [<c006c148>] (generic_handle_irq+0x20/0x30) [<c006c148>] (generic_handle_irq) from [<c000f35c>] (handle_IRQ+0x64/0x8c) [<c000f35c>] (handle_IRQ) from [<c0008528>] (gic_handle_irq+0x3c/0x60) [<c0008528>] (gic_handle_irq) from [<c0012904>] (__irq_svc+0x44/0x78) Exception stack(0xed197f60 to 0xed197fa8) 7f60: 00000134 60000013 bd94362e bd94362e be96b37c 00000014 fffffd72 00000122 7f80: c000ebe4 ed196000 00000000 00000011 c032c0d8 ed197fa8 c0064008 c000ea20 7fa0: 60000013 ffffffff [<c0012904>] (__irq_svc) from [<c000ea20>] (ret_fast_syscall+0x0/0x48) ---[ end trace 478f921d0d542d1e ]--- Mapped at: [<c0227184>] debug_dma_map_page+0x48/0x11c [<c02aaca0>] macb_start_xmit+0x184/0x2a8 [<c03143c0>] dev_hard_start_xmit+0x334/0x470 [<c032c09c>] sch_direct_xmit+0x78/0x2f8 [<c0314814>] __dev_queue_xmit+0x318/0x708 due to missing checks of the dma mapping. Add the appropriate checks to fix this. Signed-off-by:
-
Daniel Borkmann authored
While working on ec0223ec ("net: sctp: fix sctp_sf_do_5_1D_ce to verify if we/peer is AUTH capable"), we noticed that there's a skb memory leakage in the error path. Running the same reproducer as in ec0223ec and by unconditionally jumping to the error label (to simulate an error condition) in sctp_sf_do_5_1D_ce() receive path lets kmemleak detector bark about the unfreed chunk->auth_chunk skb clone: Unreferenced object 0xffff8800b8f3a000 (size 256): comm "softirq", pid 0, jiffies 4294769856 (age 110.757s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 89 ab 75 5e d4 01 58 13 00 00 00 00 00 00 00 00 ..u^..X......... backtrace: [<ffffffff816660be>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8119f328>] kmem_cache_alloc+0xc8/0x210 [<ffffffff81566929>] skb_clone+0x49/0xb0 [<ffffffffa0467459>] sctp_endpoint_bh_rcv+0x1d9/0x230 [sctp] [<ffffffffa046fdbc>] sctp_inq_push+0x4c/0x70 [sctp] [<ffffffffa047e8de>] sctp_rcv+0x82e/0x9a0 [sctp] [<ffffffff815abd38>] ip_local_deliver_finish+0xa8/0x210 [<ffffffff815a64af>] nf_reinject+0xbf/0x180 [<ffffffffa04b4762>] nfqnl_recv_verdict+0x1d2/0x2b0 [nfnetlink_queue] [<ffffffffa04aa40b>] nfnetlink_rcv_msg+0x14b/0x250 [nfnetlink] [<ffffffff815a3269>] netlink_rcv_skb+0xa9/0xc0 [<ffffffffa04aa7cf>] nfnetlink_rcv+0x23f/0x408 [nfnetlink] [<ffffffff815a2bd8>] netlink_unicast+0x168/0x250 [<ffffffff815a2fa1>] netlink_sendmsg+0x2e1/0x3f0 [<ffffffff8155cc6b>] sock_sendmsg+0x8b/0xc0 [<ffffffff8155d449>] ___sys_sendmsg+0x369/0x380 What happens is that commit bbd0d598 clones the skb containing the AUTH chunk in sctp_endpoint_bh_rcv() when having the edge case that an endpoint requires COOKIE-ECHO chunks to be authenticated: ---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ----------> <------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] --------- ------------------ AUTH; COOKIE-ECHO ----------------> <-------------------- COOKIE-ACK --------------------- When we enter sctp_sf_do_5_1D_ce() and before we actually get to the point where we process (and subsequently free) a non-NULL chunk->auth_chunk, we could hit the "goto nomem_init" path from an error condition and thus leave the cloned skb around w/o freeing it. The fix is to centrally free such clones in sctp_chunk_destroy() handler that is invoked from sctp_chunk_free() after all refs have dropped; and also move both kfree_skb(chunk->auth_chunk) there, so that chunk->auth_chunk is either NULL (since sctp_chunkify() allocs new chunks through kmem_cache_zalloc()) or non-NULL with a valid skb pointer. chunk->skb and chunk->auth_chunk are the only skbs in the sctp_chunk structure that need to be handeled. While at it, we should use consume_skb() for both. It is the same as dev_kfree_skb() but more appropriately named as we are not a device but a protocol. Also, this effectively replaces the kfree_skb() from both invocations into consume_skb(). Functions are the same only that kfree_skb() assumes that the frame was being dropped after a failure (e.g. for tools like drop monitor), usage of consume_skb() seems more appropriate in function sctp_chunk_destroy() though. Fixes: bbd0d598 ("[SCTP]: Implement the receive and verification of AUTH chunk") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Vlad Yasevich <yasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Acked-by:
-
hayeswang authored
There are known issues for switching the drivers between ECM mode and vendor mode. The interrup transfer may become abnormal. The hardware may have the opportunity to die if you change the configuration without unloading the current driver first, because all the control transfers of the current driver would fail after the command of switching the configuration. Although to use the ecm driver and vendor driver independently is fine, it may have problems to change the driver from one to the other by switching the configuration. Additionally, now the vendor mode driver is more powerful than the ECM driver. Thus, disable the ECM mode driver, and let r8152 to set the configuration to vendor mode and reset the device automatically. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
Gavin Shan authored
In kexec scenario, we failed to load the mlx4 driver in the second kernel because the ownership bit was hold by the first kernel without release correctly. The patch adds shutdown() interface so that the ownership can be released correctly in the first kernel. It also helps avoiding EEH error happened during boot stage of the second kernel because of undesired traffic, which can't be handled by hardware during that stage on Power platform. Signed-off-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Tested-by:
Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by:
-
Linus Lüssing authored
MLD queries are supposed to have an IPv6 link-local source address according to RFC2710, section 4 and RFC3810, section 5.1.14. This patch adds a sanity check to ignore such broken MLD queries. Without this check, such malformed MLD queries can result in a denial of service: The queries are ignored by any MLD listener therefore they will not respond with an MLD report. However, without this patch these malformed MLD queries would enable the snooping part in the bridge code, potentially shutting down the according ports towards these hosts for multicast traffic as the bridge did not learn about these listeners. Reported-by:
Jan Stancek <jstancek@redhat.com> Signed-off-by:
Linus Lüssing <linus.luessing@web.de> Reviewed-by:
-
Nikolay Aleksandrov authored
I stumbled upon this very serious bug while hunting for another one, it's a very subtle race condition between inet_frag_evictor, inet_frag_intern and the IPv4/6 frag_queue and expire functions (basically the users of inet_frag_kill/inet_frag_put). What happens is that after a fragment has been added to the hash chain but before it's been added to the lru_list (inet_frag_lru_add) in inet_frag_intern, it may get deleted (either by an expired timer if the system load is high or the timer sufficiently low, or by the fraq_queue function for different reasons) before it's added to the lru_list, then after it gets added it's a matter of time for the evictor to get to a piece of memory which has been freed leading to a number of different bugs depending on what's left there. I've been able to trigger this on both IPv4 and IPv6 (which is normal as the frag code is the same), but it's been much more difficult to trigger on IPv4 due to the protocol differences about how fragments are treated. The setup I used to reproduce this is: 2 machines with 4 x 10G bonded in a RR bond, so the same flow can be seen on multiple cards at the same time. Then I used multiple instances of ping/ping6 to generate fragmented packets and flood the machines with them while running other processes to load the attacked machine. *It is very important to have the _same flow_ coming in on multiple CPUs concurrently. Usually the attacked machine would die in less than 30 minutes, if configured properly to have many evictor calls and timeouts it could happen in 10 minutes or so. An important point to make is that any caller (frag_queue or timer) of inet_frag_kill will remove both the timer refcount and the original/guarding refcount thus removing everything that's keeping the frag from being freed at the next inet_frag_put. All of this could happen before the frag was ever added to the LRU list, then it gets added and the evictor uses a freed fragment. An example for IPv6 would be if a fragment is being added and is at the stage of being inserted in the hash after the hash lock is released, but before inet_frag_lru_add executes (or is able to obtain the lru lock) another overlapping fragment for the same flow arrives at a different CPU which finds it in the hash, but since it's overlapping it drops it invoking inet_frag_kill and thus removing all guarding refcounts, and afterwards freeing it by invoking inet_frag_put which removes the last refcount added previously by inet_frag_find, then inet_frag_lru_add gets executed by inet_frag_intern and we have a freed fragment in the lru_list. The fix is simple, just move the lru_add under the hash chain locked region so when a removing function is called it'll have to wait for the fragment to be added to the lru_list, and then it'll remove it (it works because the hash chain removal is done before the lru_list one and there's no window between the two list adds when the frag can get dropped). With this fix applied I couldn't kill the same machine in 24 hours with the same setup. Fixes: 3ef0eb0d ("net: frag, move LRU list maintenance outside of rwlock") CC: Florian Westphal <fw@strlen.de> CC: Jesper Dangaard Brouer <brouer@redhat.com> CC: David S. Miller <davem@davemloft.net> Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
