An error occurred fetching the project authors.
- 21 Jun, 2021 20 commits
-
-
Anand Khoje authored
pahole shows two 4-byte holes in struct ib_port_data after pkey_list_lock and netdev_lock respectively. Shuffling the netdev_lock to be after pkey_list_lock, this shaves off eight bytes from the struct. Link: https://lore.kernel.org/r/20210616154509.1047-3-anand.a.khoje@oracle.comSuggested-by: Haakon Bugge <haakon.bugge@oracle.com> Signed-off-by: Anand Khoje <anand.a.khoje@oracle.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Anand Khoje authored
Removed port validity check from ib_get_cached_subnet_prefix() as this check is not needed because "port_num" is valid. Link: https://lore.kernel.org/r/20210616154509.1047-2-anand.a.khoje@oracle.comSuggested-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Anand Khoje <anand.a.khoje@oracle.com> Signed-off-by: Haakon Bugge <haakon.bugge@oracle.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Leon Romanovsky authored
Compilation with W=1 produces warnings similar to the below. drivers/infiniband/ulp/ipoib/ipoib_main.c:320: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst All such occurrences were found with the following one line git grep -A 1 "\/\*\*" drivers/infiniband/ Link: https://lore.kernel.org/r/e57d5f4ddd08b7a19934635b44d6d632841b9ba7.1623823612.git.leonro@nvidia.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> #rtrs Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Yangyang Li authored
Switch xrcd index allocation and release from hns own bitmap interface to IDA interface. Link: https://lore.kernel.org/r/1623325814-55737-7-git-send-email-liweihang@huawei.comSigned-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Yangyang Li authored
Switch pd index allocation and release from hns own bitmap interface to IDA interface. Link: https://lore.kernel.org/r/1623325814-55737-6-git-send-email-liweihang@huawei.comSigned-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Yangyang Li authored
Switch mtpt index allocation and release from hns own bitmap interface to IDA interface. Link: https://lore.kernel.org/r/1623325814-55737-5-git-send-email-liweihang@huawei.comSigned-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Yangyang Li authored
Round-robin (RR) is no longer used in the allocation of the bitmap table, and all the function input parameters that use this mechanism are BITMAP_NO_RR. The code that defines and uses the RR needs to be deleted. Link: https://lore.kernel.org/r/1623325814-55737-4-git-send-email-liweihang@huawei.comSigned-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Yangyang Li authored
hns_roce_bitmap_free_range() is only called inside hns_roce_bitmap_free(), and the input parameter "cnt" is set to a constant 1. In addition, the driver does not use alloc_range scenarios, so free_range does not need to exist. Link: https://lore.kernel.org/r/1623325814-55737-3-git-send-email-liweihang@huawei.comSigned-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Yangyang Li authored
The function is no longer used. Link: https://lore.kernel.org/r/1623325814-55737-2-git-send-email-liweihang@huawei.comSigned-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Wenpeng Liang authored
There are some '%u' for 'int' and '%d' for 'unsigend int', they should be fixed. Link: https://lore.kernel.org/r/1623325232-30900-1-git-send-email-liweihang@huawei.comSigned-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Xi Wang authored
Remove unused members in srq context structure. Link: https://lore.kernel.org/r/1624262443-24528-10-git-send-email-liweihang@huawei.comSigned-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Yixing Liu authored
Use hr_write_reg() instead of roce_set_field(). Link: https://lore.kernel.org/r/1624262443-24528-9-git-send-email-liweihang@huawei.comSigned-off-by: Yixing Liu <liuyixing1@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Yixing Liu authored
Use "hr_reg_write" to replace "roce_set_filed". Link: https://lore.kernel.org/r/1624262443-24528-8-git-send-email-liweihang@huawei.comSigned-off-by: Yixing Liu <liuyixing1@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Lang Cheng authored
WQE_INDEX and OPCODE and QPN of CQE use redundant masks. Just remove them. Link: https://lore.kernel.org/r/1624262443-24528-7-git-send-email-liweihang@huawei.comSigned-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Lang Cheng authored
Fill all QPC fileds with hr_reg_*() instead of roce_set_*(). SQPN is used for HIP08 ES only, it should be removed. Link: https://lore.kernel.org/r/1624262443-24528-6-git-send-email-liweihang@huawei.comSigned-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Yixing Liu authored
Use hr_reg_*() to write CQ context, it's simpler than roce_set_*(). Link: https://lore.kernel.org/r/1624262443-24528-5-git-send-email-liweihang@huawei.comSigned-off-by: Yixing Liu <liuyixing1@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Lang Cheng authored
In order to avoid to do bitwise operations on a boolean value, add a new register interface to avoid sparse comlaint about "dubious: x & !y" when calling hr_reg_write(ctx, field, !!val). Fixes: dc504774 ("RDMA/hns: Use new interface to set MPT related fields") Fixes: 495c2480 ("RDMA/hns: Add XRC subtype in QPC and XRC type in SRQC") Link: https://lore.kernel.org/r/1624262443-24528-4-git-send-email-liweihang@huawei.comSigned-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Weihang Li authored
GCC may reports an running time assert error when a value calculated from ib_mtu_enum_to_int() is using as 'val' in FIELD_PREDP: include/linux/compiler_types.h:328:38: error: call to '__compiletime_assert_1524' declared with attribute error: FIELD_PREP: value too large for the field So a check is added about whether integer mtu from ib_mtu_enum_to_int() is negative to avoid this warning. Link: https://lore.kernel.org/r/1624262443-24528-3-git-send-email-liweihang@huawei.comReported-by: kernel test robot <lkp@intel.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Weihang Li authored
There is no need to use "!!" before "eq->eqe_size == HNS_ROCE_V3_EQE_SIZE", or sparse will complain about "dubious: x & !y". Fixes: 782832f2 ("RDMA/hns: Simplify the function config_eqc()") Link: https://lore.kernel.org/r/1624262443-24528-2-git-send-email-liweihang@huawei.comSigned-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Avihai Horon authored
Relaxed Ordering is a capability that can only benefit users that support it. All kernel ULPs should support Relaxed Ordering, as they are designed to read data only after observing the CQE and use the DMA API correctly. Hence, implicitly enable Relaxed Ordering by default for MR transfers in kernel ULPs. Link: https://lore.kernel.org/r/b7e820aab7402b8efa63605f4ea465831b3b1e5e.1623236426.git.leonro@nvidia.comSigned-off-by: Avihai Horon <avihaih@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
- 18 Jun, 2021 6 commits
-
-
Xi Wang authored
Both of HIP08 and HIP09 require the extended doorbell information to be cleared before being used. Fixes: 6b63597d ("RDMA/hns: Add TSQ link table support") Link: https://lore.kernel.org/r/1623392089-35639-1-git-send-email-liweihang@huawei.comSigned-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Jack Wang authored
Currently we only check device max_qp_wr limit for IO connection, but not for service connection. We should check for both. So save the max_qp_wr device limit in wr_limit, and use it for both IO connections and service connections. While at it, also remove an outdated comments. Link: https://lore.kernel.org/r/20210614090337.29557-6-jinpu.wang@ionos.comSuggested-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Guoqing Jiang authored
Those variables are passed to create_cq, create_qp, rtrs_iu_alloc and rtrs_iu_free, so these *_size means the num of unit. And cq_size also means number of cq element. Also move the setting of cq_num to common path. Link: https://lore.kernel.org/r/20210614090337.29557-5-jinpu.wang@ionos.comSigned-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Md Haris Iqbal authored
When using rdma_rxe, post_one_recv() returns ENOMEM error due to the full recv queue. This patch increase the number of WR for receive queue to support all devices. Link: https://lore.kernel.org/r/20210614090337.29557-4-jinpu.wang@ionos.comSigned-off-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Jack Wang authored
We use device limit max_send_sge, which is suboptimal for memory usage. We don't need that much for User Con, 1 is enough. And for IO con, sess->max_segments + 1 is enough Link: https://lore.kernel.org/r/20210614090337.29557-3-jinpu.wang@ionos.comSigned-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Jack Wang authored
Currently rtrs when create_qp use a coarse numbers (bigger in general), which leads to hardware create more resources which only waste memory with no benefits. For max_send_wr, we don't really need alway max_qp_wr size when creating qp, reduce it to cq_size. For max_recv_wr, cq_size is enough. With the patch when sess_queue_depth=128, per session (2 paths) memory consumption reduced from 188 MB to 65MB When always_invalidate is enabled, we need send more wr, so treat it special. Fixes: 9cb83748 ("RDMA/rtrs: server: main functionality") Link: https://lore.kernel.org/r/20210614090337.29557-2-jinpu.wang@ionos.comSigned-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com> Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
- 16 Jun, 2021 14 commits
-
-
Jason Gunthorpe authored
The driver's device group can be specified as part of the ops structure like the device's port group. No need for the complicated API. Link: https://lore.kernel.org/r/8964785a34fd3a29ff5b6693493f575b717e594d.1623427137.git.leonro@nvidia.comSigned-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Jason Gunthorpe authored
Now that the port_groups data is being destroyed and managed by the core code this restriction is no longer needed. All the ib_port_attrs are compatible with the core's sysfs lifecycle. When the main device is destroyed and moved to another namespace the driver's port sysfs can be created/destroyed as well due to it now being a simple attribute list. Link: https://lore.kernel.org/r/afd8b676eace2821692d44489ff71856277c48d1.1623427137.git.leonro@nvidia.comSigned-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Jason Gunthorpe authored
init_port was only being used to register sysfs attributes against the port kobject. Now that all users are creating static attribute_group's we can simply set the attribute_group list in the ops and the core code can just handle it directly. This makes all the sysfs management quite straightforward and prevents any driver from abusing the naked port kobject in future because no driver code can access it. Link: https://lore.kernel.org/r/114f68f3d921460eafe14cea5a80ca65d81729c3.1623427137.git.leonro@nvidia.comSigned-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Jason Gunthorpe authored
hfi1 should not be creating a mess of kobjects to attach to the port kobject - this is all attributes. The proper API is to create an attribute_group list and create it against the port's kobject. Link: https://lore.kernel.org/r/cbe0ccb6175dd22274359b6ad803a37435a70e91.1623427137.git.leonro@nvidia.comTested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Jason Gunthorpe authored
qib should not be creating a mess of kobjects to attach to the port kobject - this is all attributes. The proper API is to create an attribute_group list and create it against the port's kobject. Link: https://lore.kernel.org/r/911e0031e1ed495b0006e8a6efec7b67a702cd5e.1623427137.git.leonro@nvidia.comTested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Jason Gunthorpe authored
This code is trying to attach a list of counters grouped into 4 groups to the ib_port sysfs. Instead of creating a bunch of kobjects simply express everything naturally as an ib_port_attribute and add a single attribute_groups list. Remove all the naked kobject manipulations. Link: https://lore.kernel.org/r/0d5a7241ee0fe66622de04fcbaafaf6a791d5c7c.1623427137.git.leonro@nvidia.comSigned-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Jason Gunthorpe authored
Other things outside the core code are creating attributes against the port. This patch exposes the basic machinery to do this. The ib_port_attribute type allows creating groups of attributes attatched to the port and comes with the usual machinery to do this. Link: https://lore.kernel.org/r/5c4aeae57f6fa7c59a1d6d1c5506069516ae9bbf.1623427137.git.leonro@nvidia.comSigned-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Jason Gunthorpe authored
This call does nothing because the ib_port kobj is nested under a struct device kobject and the dev_uevent_filter() function of the struct device blocks uevents for any children kobj's that are not also struct devices. A uevent for the struct device will be triggered after ib_setup_port_attrs() returns which causes udev to pick up all the deep "attributes" which are implemented as kobjects nested under a struct device and assign them to the udev object for the struct device: $ udevadm info -a /sys/class/infiniband/ibp0s9 ATTR{ports/1/counters/excessive_buffer_overrun_errors}=="0" Link: https://lore.kernel.org/r/49231c92c7d4c60686de18f7e20932d0c82160ee.1623427137.git.leonro@nvidia.comSigned-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Jason Gunthorpe authored
Instead of calling device_add_groups() add the group to the existing groups array which is managed through device_add(). This requires setting up the hw_counters before device_add(), so it gets split up from the already split port sysfs flow. Move all the memory freeing to the release function. Link: https://lore.kernel.org/r/666250d937b64f6fdf45da9e2dc0b6e5e4f7abd8.1623427137.git.leonro@nvidia.comSigned-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Jason Gunthorpe authored
Use the same technique as gid_attrs now uses to manage the port sysfs. Bundle everything into three allocations and use a single sysfs_create_groups() to build everything in one shot. All the memory is always freed in the kobj release function, removing most of the error unwinding. The gid_attr technique and the hw_counters are very similar, merge the two together and combine the sysfs_create_group() call for hw_counters with the single sysfs group setup. Link: https://lore.kernel.org/r/b688f3340694c59f7b44b1bde40e25559ef43cf3.1623427137.git.leonro@nvidia.comSigned-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Jason Gunthorpe authored
Instead of having an whole bunch of different allocations to create the gid_attr kobjects reduce it to three, one for the kobj struct plus the attributes, and one for the attribute list for each of the two groups. Move the freeing of all allocations to the release function. Reorder the operations so all the allocations happen first then the kobject & sysfs operations are last. This removes the majority of the complicated error unwind since the release function will always undo all the memory allocations. Freeing the memory is also much simpler since there is a lot less of it. Consolidate creating the "group of array indexes" pattern into one helper function. Ensure kobject_del is used. Link: https://lore.kernel.org/r/f4149d379db7178d37d11d75e3026bf550f818a1.1623427137.git.leonro@nvidia.comSigned-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Jason Gunthorpe authored
The gid_attrs directory is a dedicated kobj nested under the port, construct/destruct it with its own pair of functions for understandability. This is much more readable than having it weirdly inlined out of order into the add_port() function. Link: https://lore.kernel.org/r/1c9434111b6770a7aef0e644a88a16eee7e325b8.1623427137.git.leonro@nvidia.comSigned-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Jason Gunthorpe authored
This code creates a 'struct hw_stats_attribute' for each sysfs entry that contains a naked 'struct attribute' inside. It then proceeds to attach this same structure to a 'struct device' kobj and a 'struct ib_port' kobj. However, this violates the typing requirements. 'struct device' requires the attribute to be a 'struct device_attribute' and 'struct ib_port' requires the attribute to be 'struct port_attribute'. This happens to work because the show/store function pointers in all three structures happen to be at the same offset and happen to be nearly the same signature. This means when container_of() was used to go between the wrong two types it still managed to work. However clang CFI detection notices that the function pointers have a slightly different signature. As with show/store this was only working because the device and port struct layouts happened to have the kobj at the front. Correct this by have two independent sets of data structures for the port and device case. The two different attributes correctly include the port/device_attribute struct and everything from there up is kept split. The show/store function call chains start with device/port unique functions that invoke a common show/store function pointer. Link: https://lore.kernel.org/r/a8b3864b4e722aed3657512af6aa47dc3c5033be.1623427137.git.leonro@nvidia.comReported-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Jason Gunthorpe authored
It is much saner to store a pointer to the kobject structure that contains the cannonical stats pointer than to copy the stats pointers into a public structure. Future patches will require the sysfs pointer for other purposes. Link: https://lore.kernel.org/r/f90551dfd296cde1cb507bbef27cca9891d19871.1623427137.git.leonro@nvidia.comSigned-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-