- 29 Nov, 2023 8 commits
-
-
Thomas Zimmermann authored
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in virtual address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default I/O-memory-based implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-5-tzimmermann@suse.de
-
Thomas Zimmermann authored
The vfb driver operates on system memory. Mark the framebuffer accordingly. Helpers operating on the framebuffer memory will test for the presence of this flag. Signed-off-by:
-
Thomas Zimmermann authored
Only initialize mmap and draw helpers with macros; leave read/write callbacks to driver implementations. Fixes the following warnings: CC [M] drivers/video/fbdev/sm712fb.o sm712fb.c:1355:25: warning: initialized field overwritten [-Woverride-init] 1355 | .fb_fillrect = cfb_fillrect, | ^~~~~~~~~~~~ sm712fb.c:1355:25: note: (near initialization for 'smtcfb_ops.fb_fillrect') sm712fb.c:1356:25: warning: initialized field overwritten [-Woverride-init] 1356 | .fb_imageblit = cfb_imageblit, | ^~~~~~~~~~~~~ sm712fb.c:1356:25: note: (near initialization for 'smtcfb_ops.fb_imageblit') sm712fb.c:1357:25: warning: initialized field overwritten [-Woverride-init] 1357 | .fb_copyarea = cfb_copyarea, | ^~~~~~~~~~~~ sm712fb.c:1357:25: note: (near initialization for 'smtcfb_ops.fb_copyarea') sm712fb.c:1358:25: warning: initialized field overwritten [-Woverride-init] 1358 | .fb_read = smtcfb_read, | ^~~~~~~~~~~ sm712fb.c:1358:25: note: (near initialization for 'smtcfb_ops.fb_read') sm712fb.c:1359:25: warning: initialized field overwritten [-Woverride-init] 1359 | .fb_write = smtcfb_write, | ^~~~~~~~~~~~ sm712fb.c:1359:25: note: (near initialization for 'smtcfb_ops.fb_write') Signed-off-by: -
Thomas Zimmermann authored
Fix build by using the correct name for the initializer macro for struct fb_ops. Signed-off-by:
-
Xin Ji authored
Polling firmware HPD GPIO status, set HPD irq detect window to 2ms after firmware HPD GPIO initial done Signed-off-by:
Xin Ji <xji@analogixsemi.com> Reviewed-by:
Robert Foss <rfoss@kernel.org> Signed-off-by:
-
Xin Ji authored
This reverts commit 330140d7 200ms delay will cause panel display image later than backlight turn on, revert this patch. Fixes: 330140d7 ("drm/bridge: Add 200ms delay to wait FW HPD status stable") Signed-off-by:
-
Jean Delvare authored
Only offer the Loongson DRM driver as an option on platforms where it makes sense. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Sui Jingfeng <sui.jingfeng@linux.dev> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by:
Sui Jingfeng <sui.jingfeng@linux.dev> Signed-off-by:
-
Uwe Kleine-König authored
pm_runtime_resume_and_get() already drops the runtime PM usage counter in the error case. So a call to pm_runtime_put_sync() can be dropped. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
- 28 Nov, 2023 25 commits
-
-
Hsin-Yi Wang authored
If a non generic edp-panel is under aux-bus, the mode read from edid would still be selected as preferred and results in multiple preferred modes, which is ambiguous. If both hard-coded mode and edid exists, only add mode from hard-coded. Signed-off-by:
Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by:
-
Hsin-Yi Wang authored
Add auo_b116xa3_mode to override the original modes parsed from edid of the panels 0x405c B116XAK01.0 and 0x615c B116XAN06.1 which result in glitches on panel. Signed-off-by:
-
Hsin-Yi Wang authored
Generic edp gets mode from edid. However, some panels report incorrect mode in this way, resulting in glitches on panel. Introduce a new quirk additional_mode to the generic edid to pick a correct hardcoded mode. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. There is one error path in tilcdc_pdev_remove() that potentially could yield a non-zero return code. In this case an error message describing the failure is emitted now instead of remove callback returned a non-zero value. This will be ignored. before. Otherwise there is no difference. Also note that currently tilcdc_get_external_components() doesn't return negative values. Signed-off-by:
Jyri Sarha <jyri.sarha@iki.fi> Link: https://patchwork.freedesktop.org/patch/msgid/20231102165640.3307820-34-u.kleine-koenig@pengutronix.deReviewed-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Tested-by:
-
Bert Karwatzki authored
Commit f3123c25, in combination with the use of work queues by the GPU scheduler, leads to random lock-ups of the GUI. This is a partial revert of of commit f3123c25 since drm_sched_wakeup() still needs its entity argument to pass it to drm_sched_can_queue(). Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2994 Link: https://lists.freedesktop.org/archives/dri-devel/2023-November/431606.htmlSigned-off-by:
Bert Karwatzki <spasswolf@web.de> Link: https://patchwork.freedesktop.org/patch/msgid/20231127160955.87879-1-spasswolf@web.de Link: https://lore.kernel.org/r/36bece178ff5dc705065e53d1e5e41f6db6d87e4.camel@web.de Fixes: f3123c25 ("drm/sched: Qualify drm_sched_wakeup() by drm_sched_entity_is_ready()") Reviewed-by:
Luben Tuikov <ltuikov89@gmail.com> Signed-off-by:
-
Donald Robson authored
Some reported by Stephen Rothwell. The rest were found by running the kernel-doc build script. Some indentation fixes. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311241526.Y2WZeUau-lkp@intel.com/Signed-off-by:
Donald Robson <donald.robson@imgtec.com> Signed-off-by:
Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231128173507.95119-1-donald.robson@imgtec.com
-
Liu Ying authored
Fix a couple of building warnings on used uninitialized 'best_m' and 'best_n' local variables by initializing 'best_m' to zero and 'best_n' to UINT_MAX. This makes compiler happy only. No functional change. Fixes: ce62f8ea ("drm/bridge: imx: Add i.MX93 MIPI DSI support") Reported-by:
Liu Ying <victor.liu@nxp.com> Reviewed-by:
-
Dario Binacchi authored
s/singals/signals/ Fixes: 199e4e96 ("drm: Extract drm_bridge.h") Signed-off-by:
Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by:
-
Thomas Zimmermann authored
Detect device type and config mode in the PCI probe helper, but leave DRM device initialization where it is. Structures the driver probe and setup code into a detection and an initialization phase. A later patch can add branching to the device-initialization code. Each chip type can have it own initializer function, if necessary. Signed-off-by:
Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-11-tzimmermann@suse.de
-
Thomas Zimmermann authored
Return the ast chip and config in the detection function's parameters instead of storing them directly in the ast device instance. v2: * add break statements to switch default branches (Jocelyn) Signed-off-by:
-
Thomas Zimmermann authored
The config mode used to be a field in struct ast_device. Turn it into a named type. We'll need this for device detection. Signed-off-by:
-
Thomas Zimmermann authored
We'll have to do some of the GPU POSTing for detecting the ast device type. Make this work without an instance of the ast device. Signed-off-by:
-
Thomas Zimmermann authored
We'll have to enable the MMIO access for detecting the ast device type. Make this work without an instance of the ast device. Signed-off-by:
-
Thomas Zimmermann authored
We'll have to enable the VGA functionality for detecting the ast device type. Make this work without an instance of the ast device. Signed-off-by:
-
Thomas Zimmermann authored
Implement I/O access in helpers that do not use an ast device instance, but the raw pointer to the I/O memory. We'll later need these helpers to detect the device type before allocating the ast device instance. v3: * fix typo in commit message (Sui) Signed-off-by:
-
Thomas Zimmermann authored
Read the I/O-memory ranges into local variables before setting them in the ast device instanace. We'll later need this to split detecting the device type from the creation of the ast device instance. Signed-off-by:
-
Thomas Zimmermann authored
There are three different ways of retrieving the I/O-memory ranges for AST devices: either from PCI BAR 1, from PCI BAR 2 or from PCI BAR 1 by 'guessing'. Make the respective code more readable by making each case self- contained. Also add error checking against the length of the PCI BARs. v2: * fix I/O range length to 128 bytes * fix length test for PCI BAR 2 Signed-off-by:
-
Thomas Zimmermann authored
The lock for the I/O registers is only relevant during mode-setting operations. It protects the registers from concurrent access from reading EDID information. Reduce lock coverage to mode setting, rename the lock and move it entirely into the mode-setting code. No functional changes, as the I/O lock was never used for anything else than mode setting. Signed-off-by:
-
Thomas Zimmermann authored
Backmerging to get commit 8d6ef265 ("drm/ast: Disconnect BMC if physical connector is connected") into drm-misc-next. Signed-off-by:
-
Danilo Krummrich authored
The driver specific reference count indicates whether the VM should be teared down, whereas GPUVM's reference count indicates whether the VM structure can finally be freed. Hence, free the VM structure in pvr_gpuvm_free() and drop the last GPUVM reference after tearing down the VM. Generally, this prevents lifetime issues such as the VM being freed as long as drm_gpuvm_bo structures still hold references to the VM. Fixes: ff5f643d ("drm/imagination: Add GEM and VM related code") Signed-off-by:
Danilo Krummrich <dakr@redhat.com> Reviewed-by:
Frank Binns <frank.binns@imgtec.com> Signed-off-by:
-
Danilo Krummrich authored
Extend pvr_device_addr_and_size_are_valid() by the corresponding GPUVM sanity checks. This includes a, previously missing, overflow check for the base address and size of the requested mapping. Fixes: ff5f643d ("drm/imagination: Add GEM and VM related code") Signed-off-by:
-
Danilo Krummrich authored
Use drm_gpuvm_bo_obtain() instead of drm_gpuvm_bo_create(). The latter should only be used in conjunction with drm_gpuvm_bo_obtain_prealloc(). drm_gpuvm_bo_obtain() re-uses existing instances of a given VM and BO combination, whereas drm_gpuvm_bo_create() would always create a new instance of struct drm_gpuvm_bo and hence leave us with duplicates. Fixes: ff5f643d ("drm/imagination: Add GEM and VM related code") Signed-off-by:
-
Yang Li authored
./drivers/gpu/drm/imagination/pvr_free_list.c:258:2-3: Unneeded semicolon Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7635Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Reviewed-by:
-
Colin Ian King authored
There are a couple of spelling mistakes in literal strings in the stid_fmts array. Fix these. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Reviewed-by:
-
Daniel Vetter authored
Thomas Zimermann needs 8d6ef265 ("drm/ast: Disconnect BMC if physical connector is connected") for further ast work in -next. Minor conflicts in ivpu between 3de6d959 ("accel/ivpu: Pass D0i3 residency time to the VPU firmware") and 3f7c0634 ("accel/ivpu/37xx: Fix hangs related to MMIO reset") changing adjacent lines. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 27 Nov, 2023 5 commits
-
-
Rob Herring authored
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data in a single step. With this, adjust the includes to explicitly include the correct headers. That also serves as preparation to remove implicit includes within the DT headers (of_device.h in particular). Reviewed-by:
Andrew Jeffery <andrew@codeconstruct.com.au> Link: https://lore.kernel.org/r/20231020125214.2930329-1-robh@kernel.orgSigned-off-by:
Rob Herring <robh@kernel.org>
-
Luben Tuikov authored
Fix compilation issues with DRM scheduler priority rename MIN to LOW. Signed-off-by:
Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/7429262c-6dea-4dcc-bf7e-54d2277dabf1@amd.com
-
Rajneesh Bhardwaj authored
Try to allocate system memory on the NUMA node the device is closest to and try to run delayed_delete workers on a CPU of this node as well. To optimize the memory clearing operation when a TTM BO gets freed by the delayed_delete worker, scheduling it closer to a NUMA node where the memory was initially allocated helps avoid the cases where the worker gets randomly scheduled on the CPU cores that are across interconnect boundaries such as xGMI, PCIe etc. This change helps USWC GTT allocations on NUMA systems (dGPU) and AMD APU platforms such as GFXIP9.4.3. Signed-off-by:
Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Acked-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt:: "Eventfs fixes: - With the usage of simple_recursive_remove() recommended by Al Viro, the code should not be calling "d_invalidate()" itself. Doing so is causing crashes. The code was calling d_invalidate() on the race of trying to look up a file while the parent was being deleted. This was detected, and the added dentry was having d_invalidate() called on it, but the deletion of the directory was also calling d_invalidate() on that same dentry. - A fix to not free the eventfs_inode (ei) until the last dput() was called on its ei->dentry made the ei->dentry exist even after it was marked for free by setting the ei->is_freed. But code elsewhere still was checking if ei->dentry was NULL if ei->is_freed is set and would trigger WARN_ON if that was the case. That's no longer true and there should not be any warnings when it is true. - Use GFP_NOFS for allocations done under eventfs_mutex. The eventfs_mutex can be taken on file system reclaim, make sure that allocations done under that mutex do not trigger file system reclaim. - Clean up code by moving the taking of inode_lock out of the helper functions and into where they are needed, and not use the parameter to know to take it or not. It must always be held but some callers of the helper function have it taken when they were called. - Warn if the inode_lock is not held in the helper functions. - Warn if eventfs_start_creating() is called without a parent. As eventfs is underneath tracefs, all files created will have a parent (the top one will have a tracefs parent). Tracing update: - Add Mathieu Desnoyers as an official reviewer of the tracing subsystem" * tag 'trace-v6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: MAINTAINERS: TRACING: Add Mathieu Desnoyers as Reviewer eventfs: Make sure that parent->d_inode is locked in creating files/dirs eventfs: Do not allow NULL parent to eventfs_start_creating() eventfs: Move taking of inode_lock into dcache_dir_open_wrapper() eventfs: Use GFP_NOFS for allocation when eventfs_mutex is held eventfs: Do not invalidate dentry in create_file/dir_dentry() eventfs: Remove expectation that ei->is_freed means ei->dentry == NULL
-
- 26 Nov, 2023 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc architecture fixes from Helge Deller: "This patchset fixes and enforces correct section alignments for the ex_table, altinstructions, parisc_unwind, jump_table and bug_table which are created by inline assembly. Due to not being correctly aligned at link & load time they can trigger unnecessarily the kernel unaligned exception handler at runtime. While at it, I switched the bug table to use relative addresses which reduces the size of the table by half on 64-bit. We still had the ENOSYM and EREMOTERELEASE errno symbols as left-overs from HP-UX, which now trigger build-issues with glibc. We can simply remove them. Most of the patches are tagged for stable kernel series. Summary: - Drop HP-UX ENOSYM and EREMOTERELEASE return codes to avoid glibc build issues - Fix section alignments for ex_table, altinstructions, parisc unwind table, jump_table and bug_table - Reduce size of bug_table on 64-bit kernel by using relative pointers" * tag 'parisc-for-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Reduce size of the bug_table on 64-bit kernel by half parisc: Drop the HP-UX ENOSYM and EREMOTERELEASE error codes parisc: Use natural CPU alignment for bug_table parisc: Ensure 32-bit alignment on parisc unwind section parisc: Mark lock_aligned variables 16-byte aligned on SMP parisc: Mark jump_table naturally aligned parisc: Mark altinstructions read-only and 32-bit aligned parisc: Mark ex_table entries 32-bit aligned in uaccess.h parisc: Mark ex_table entries 32-bit aligned in assembly.h -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 microcode fixes from Ingo Molnar: "Fix/enhance x86 microcode version reporting: fix the bootup log spam, and remove the driver version announcement to avoid version confusion when distros backport fixes" * tag 'x86-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode: Rework early revisions reporting x86/microcode: Remove the driver announcement and version
-
