- 20 Mar, 2024 40 commits
-
-
Yang Wang authored
add aca deferred error type support Signed-off-by:
Yang Wang <kevinyang.wang@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Xiaojian Du authored
This will add VCN sensor value for SMU 13.0.5. Signed-off-by:
Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by:
-
Tao Zhou authored
Each RAS block has different requirement for gpu reset in poison consumption handling. Add support for mmhub RAS poison consumption handling. v2: remove the mmhub poison support for kfd int v10. Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Reviewed-by:
-
Yang Wang authored
retire unused aca_bank_report data structure. Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] Cursor update can be pre-empted by a request for setting target flip submission. This causes an issue where we're in the middle of the exit sequence trying to log to DM, but the pre-emption starts another DMCUB command submission that requires being out of idle. The DC lock aqusition can fail, and depending on the DM/OS interface it's possible that the function inserted into this thread must not fail. This means that lock aqusition must be skipped and exit *must* occur. [How] Modify when we consider idle as active. Consider it exited only once the exit has fully finished. Consider it as entered prior to actual notification. Since we're on the same core/thread the cached values are coherent and we'll see that we still need to exit. Once the cursor update resumes it'll continue doing the double exit but this won't cause a functional issue, just a (potential) redundant operation. Reviewed-by:
Duncan Ma <duncan.ma@amd.com> Acked-by:
Wayne Lin <wayne.lin@amd.com> Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Xiaojian Du authored
This will add VCN sensor value for yellow carp. Signed-off-by:
-
Candice Li authored
Use helper function instead of umc callback to set EEPROM table version. Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
-
Aric Cyr authored
This version brings along following fixes: - Clear mpc_tree in init_pipes - Program pixclk according to dcn revision - Add stream clock source to DP DTO params - Enabling urgent latency adjustment for DCN35 - To adjust dprefclk by down spread percentage - Add debug option for idle reg checks - Revert few patches which cause regression - skip forcing odm in minimal transition - Fix noise issue on HDMI AV mute - Enable fast update for DCN314 - Enable 2to1 ODM policy for DCN35 - Fix DCN31 underflow problem - Add the MALL size in the fallback function - Modify coding style/errors and remove redundant codes - Add missing registers and offset Acked-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
-
Anthony Koo authored
- Add a Replay residency mode which only calcuates the entry time based on replay state 0/1 switch. Acked-by:
Anthony Koo <anthony.koo@amd.com> Tested-by:
-
Yang Wang authored
refine aca error cache for umc v12.0 Signed-off-by:
-
Yang Wang authored
refine aca error cache for sdma v4.4.2 Signed-off-by:
-
Yang Wang authored
refine aca error cache for xgmi v6.4.0 Signed-off-by:
-
Tao Zhou authored
Support the query for both gfxhub and mmhub, also replace xcc_id with hub_inst. Signed-off-by:
-
Tao Zhou authored
Add it for mmhub v1.8. Signed-off-by:
-
Xiaojian Du authored
This will drm/amdgpu: add VCN sensor value for Vangogh. Signed-off-by:
-
Samson Tam authored
[Why] During init_pipes, otg master is not initialized. So mpc tree is still configured even if mpc bottom is not active [How] For pipes that have tg enabled, check their mpc tree and clear opp_list if mpc bottom is not active Reviewed-by:
George Shen <george.shen@amd.com> Acked-by:
Samson Tam <samson.tam@amd.com> Tested-by:
-
Yang Wang authored
refine aca error cache for mmhub v1.8 Signed-off-by:
-
Dillon Varone authored
[WHY&HOW] Pixel clock programming should be built per dcn revision, not hardcoded to use dcn20. Reviewed-by:
Chris Park <chris.park@amd.com> Acked-by:
Dillon Varone <dillon.varone@amd.com> Tested-by:
-
Dillon Varone authored
[WHY&HOW] Stream clock source is a required parameter for DP DTO programming. Reviewed-by:
-
Christian Koenig authored
The problem is that when (for example) 4k pages are replaced with a single 2M page we need to wait for change to be flushed out by invalidating the TLB before the PT can be freed. Solve this by moving the TLB flush into a DMA-fence object which can be used to delay the freeing of the PT BOs until it is signaled. V2: (Shashank) - rebase - set dma_fence_error only in case of error - add tlb_flush fence only when PT/PD BO is locked (Felix) - use vm->pasid when f is NULL (Mukul) V4: - add a wait for (f->dependency) in tlb_fence_work (Christian) - move the misplaced fence_create call to the end (Philip) V5: - free the f->dependency properly V6: (Shashank) - light code movement, moved all the clean-up in previous patch - introduce params.needs_flush and its usage in this patch - rebase without TLB HW sequence patch V7: - Keep the vm->last_update_fence and tlb_cb code until we can fix the HW sequencing (Christian) - Move all the tlb_fence related code in a separate function so that its easier to read and review V9: Addressed review comments from Christian - start PT update only when we have callback memory allocated V10: - handle device unlock in OOM case (Christian, Mukul) - added Christian's R-B Cc: Christian Koenig <christian.koenig@amd.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Acked-by:Felix Kuehling <Felix.Kuehling@amd.com> Acked-by:
Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Tested-by:
Shashank Sharma <shashank.sharma@amd.com> Reviewed-by:
Christian Koenig <christian.koenig@amd.com> Signed-off-by:
-
Yang Wang authored
refine aca error cache for gfx 9.4.3 Signed-off-by:
-
Yang Wang authored
add new api to save error count into aca cache. Signed-off-by:
-
Yang Wang authored
Add new types to distinguish between ACA error type and smu mca type. e.g.: the ACA_ERROR_TYPE_DEFERRED is not matched any smu mca valid bank channel, so add new type 'aca_smu_type' to distinguish aca error type and smu mca type. Signed-off-by:
-
Srinivasan Shanmugam authored
pipe_ctx->plane_res.mpcc_inst is of a type that can only hold values between 0 and 255, so it's always greater than or equal to 0. Thus the condition 'pipe_ctx->plane_res.mpcc_inst >= 0' was always true and has been removed. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn35/dcn35_hwseq.c:1023 dcn35_calc_blocks_to_gate() warn: always true condition '(pipe_ctx->plane_res.mpcc_inst >= 0) => (0-255 >= 0)' Fixes: 6f8b7565 ("drm/amd/display: Add DCN35 HWSEQ") Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Adds descriptions for 'new_context', 'srf_updates', and 'surface_count', and removes the excess description for 'context'. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4411: warning: Function parameter or member 'new_context' not described in 'commit_minimal_transition_state_in_dc_update' drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4411: warning: Function parameter or member 'srf_updates' not described in 'commit_minimal_transition_state_in_dc_update' drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4411: warning: Function parameter or member 'surface_count' not described in 'commit_minimal_transition_state_in_dc_update' drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4411: warning: Excess function parameter 'context' description in 'commit_minimal_transition_state_in_dc_update' Cc: Wenjing Liu <wenjing.liu@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0.c: In function ‘smu_v13_0_init_microcode’: drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0.c:108:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 108 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix); | ^~ ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/smu_v13_0.c:108:9: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 30 108 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by:Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
-
Sunil Khatri authored
adev is a global data structure and isn't expected to be NULL and hence removing the redundant adev check from the devcoredump code. Cc: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by:
Sunil Khatri <sunil.khatri@amd.com> Suggested-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
-
Nicholas Susanto authored
[Why] Underflow occurs when running netflix in a 4k144 eDP + 4k60 setup. Increasing DCFCLK or urgent latency watermark fixes the issue. Implementing this workaround for now while we figure out why this is happenning in DCN. [How] Enable urgent latency adjustment and match the reference to existing ASIC that also see increased latency at low FCLK. Reviewed-by:
Nicholas Susanto <nicholas.susanto@amd.com> Tested-by:
-
Likun Gao authored
Support for atom_firmware_info_v3_5. Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
-
Hawking Zhang authored
To ensure GPU driver touch the local framebuffer until it is initialized by integrated firmware. Signed-off-by:
-
Yang Wang authored
add amdgpu ras event id support to better distinguish different error information sources in dmesg logs. the following log will be identify by event id: {event_id} interrupt to inform RAS event {event_id} ACA logs {event_id} errors statistic since from current injection/error query {event_id} errors statistic since from gpu load Signed-off-by: -
Nicholas Kazlauskas authored
[Why] Leave disabled by default due to sequencing issues around power states where these flags aren't properly reset. [How] Allow re-enabling from DC debug option. Reviewed-by:
Gabe Teeger <gabe.teeger@amd.com> Acked-by:
-
Zhigang Luo authored
if reading pf2vf data failed 30 times continuously, it means something is wrong. Need to trigger flr_work to recover the issue. also use dev_err to print the error message to get which device has issue and add warning message if waiting IDH_FLR_NOTIFICATION_CMPL timeout. Signed-off-by:
Zhigang Luo <Zhigang.Luo@amd.com> Acked-by:
-
Xiaojian Du authored
This will add vclk and dclk sysfs node for some ASICs. Signed-off-by:
-
Xiaojian Du authored
This will add VCN sensor value for SMU 13.0.4. Signed-off-by:
-
Wenjing Liu authored
[why] In minial transitions state, ODM combine shouldn't be forced as it will make transition non seamless. The force ODM debug option is to control the end result not the intermediate transition. So we can temporarily disable ODM forcing when committing minimal transition state. [how] Backup stream ODM forcing option and clear it in minimal transition state. Once minimal transition state is released, we will restore the original debug option back. Reviewed-by:
Wenjing Liu <wenjing.liu@amd.com> Tested-by:
-
Rodrigo Siqueira authored
[Why & How] Registers and offset are missing. Add it back Acked-by:
-
Rodrigo Siqueira authored
[Why & How] This commit just drop some old comments and update a typo in another one. Acked-by:
-
Sherry Wang authored
[Why] Hostvm should be enabled/disabled accordding to the status of riommu_active, but hostvm always be disabled on DCN31 which causes underflow [How] Set correct hostvm flag on DCN31 Acked-by:
Sherry Wang <Yao.Wang1@amd.com> Tested-by:
-
Rodrigo Siqueira authored
[Why & How] Remove legacy code which is unnecessary. Acked-by:
-
