For bootloaders that support booting only ELF kernels and load only ELF
segments to memory there is no easy way to supply DTB without kernel
recompilation. For that purpose, create a section called .appended_dtb
that can be later updated with board-specific DTB using binutils e.g. at
kernel installation time.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11114/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

While mips can't use the generic compat_siginfo_t directly because
its si_code and si_errno are inverted, we can still make it as
close to the generic version as possible. This makes it easier
to update when new members are added to siginfo_t.

The main changes are adding a missing _sigsys union member and
eliminating the unused _irix_sigchld one.
Signed-off-by: Amanieu d'Antras <amanieu@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11455/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Make PAGE_MASK an unsigned long, like it is on x86, to avoid:

In file included from arch/mips/kernel/asm-offsets.c:14:0:
include/linux/mm.h: In function '__pfn_to_pfn_t':
include/linux/mm.h:1050:2: warning: left shift count >= width of type
  pfn_t pfn_t = { .val = pfn | (flags & PFN_FLAGS_MASK), };

...where PFN_FLAGS_MASK is:

#define PFN_FLAGS_MASK (~PAGE_MASK << (BITS_PER_LONG - PAGE_SHIFT))
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: ross.zwisler@linux.intel.com
Cc: hch@lst.de
Cc: linux-mips@linux-mips.org
Cc: linux-nvdimm@lists.01.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Patchwork: https://patchwork.linux-mips.org/patch/11280/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Update bmips_be_defconfig and bmips_stb_defconfig to have GZIP ramdisk
support enabled by default as well was timed printks.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Kevin Cernekee <cernekee@gmail.com>
Reviewed-by: Dragan Stancevic <dragan.stancevic@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: blogic@openwrt.org
Cc: jogo@openwrt.org
Patchwork: https://patchwork.linux-mips.org/patch/11307/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add defconfig for MIPSfpga
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: robh+dt@kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11363/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The xilfpga platform will be DT only.

Add required platform code.
DT files have already been added separately.
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: robh+dt@kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11364/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add device tree files for the MIPSfpga platform.

See Documentation/devicetree/bindings/mips/img/xilfpga.txt
for details about MIPSfpga
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: robh+dt@kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11362/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Xilfpga boots only with device-tree. Document the required properties
and the unique boot style
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: robh+dt@kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11361/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Seval of-enabled machines (bmips, lantiq, xlp, pistachio, ralink) copied
the arguments from dtb to arcs_command_line to prevent the kernel from
overwriting them.

Since there is now an option to keep the dtb arguments, default to the
new option remove the "backup" to arcs_command_line in case of USE_OF is
enabled, except for those platforms that still take the bootloader
arguments or do not use any at all.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: Ganesan Ramalingam <ganesanr@broadcom.com>
Cc: Jayachandran C <jchandra@broadcom.com>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: James Hartley <james.hartley@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11285/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Similar to how arm allows using selecting between bootloader arguments,
dtb arguments and both, allow to select them on mips. But since we have
less control over the place of the dtb do not modify it but instead use
the boot_command_line for merging them.

The default is "use bootloader arguments" to keep the current behaviour
as default.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: Ganesan Ramalingam <ganesanr@broadcom.com>
Cc: Jayachandran C <jchandra@broadcom.com>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: James Hartley <james.hartley@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11284/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Since OF is now a user selectable symbol, the choice for appended dtb
support should only be visible when USE_OF is selected, as this
indicates actual machine support for device tree in MIPS.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: Ganesan Ramalingam <ganesanr@broadcom.com>
Cc: Jayachandran C <jchandra@broadcom.com>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: James Hartley <james.hartley@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/11283/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jonas Gorski <jogo@openwrt.org>
Cc: Joe Perches <joe@perches.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Nicolas Schichan <nschichan@freebox.fr>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11300/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Now LOONGSON_CHIPCFG register definition doesn't depend on CPUFREQ any
more, so CPU_SUPPORTS_CPUFREQ is no longer needed for suspend/resume.
Remove CONFIG_LOONGSON_SUSPEND and use CONFIG_SUSPEND instead.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11274/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11458/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11450/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

There is a DWC2 USB core in these SoCs. To make USB work we need to first
reset and power the state machine. These are SoC specific registers and
not part of the actual USB core.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11449/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Some configurations of AR9 reported the incorrect speed for the fpi bus.
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11448/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The rt305x support is missing a clock required by the ethernet driver.
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11447/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Some pcie cards have problems after a reboot without this.
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11446/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Setting pm_power_off is apprently wrong and makes drivers such as
gpio-poweroff not work.
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11445/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The code currently panics if PCI is enabled but the SoC has no PCI bus.
This check is superfluous as the driver only loads if enabled in the
devicetree.
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11444/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The current code adds the delta twice, which is obviously wrong.
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11443/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MT7688 has several uarts that can be used for console. There are several
boards in the wild, that use ttyS1 or ttyS2. This patch applies a simply
autodetection routine to figure out which ttyS the bootloader used as
console. The uarts come up in 6 bit mode by default. The bootloader will
have set 8 bit mode on the console. Find that 8bit tty and use it.
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11459/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

If the USB HCD is running and the cpu is scaled too low, then the USB
stops working. Increase the idle speed of the core to fix this if the
kernel is built with USB support.

The "magic" values are taken from the Ralink SDK Kernel.
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11441/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This makes detection a lot easier for audio, wifi, ... drivers.
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11440/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MT7688 is similar tot he MT7628 but has a different wifi radio.
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11439/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add AHCI and PHY device nodes to MIPS-based BCM7362 set-top box
platform.
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Dragan Stancevic <dragan.stancevic@gmail.com>
Cc: linux-ide@vger.kernel.org
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11379/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add AHCI and PHY device nodes to MIPS-based BCM7346 set-top box
platform.
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Dragan Stancevic <dragan.stancevic@gmail.com>
Cc: linux-ide@vger.kernel.org
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11378/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add AHCI and PHY device nodes to MIPS-based BCM7425 set-top box
platform.
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Dragan Stancevic <dragan.stancevic@gmail.com>
Cc: linux-ide@vger.kernel.org
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11377/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add I2C device nodes to BMIPS based BCM7362 platform.
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Kamal Dasu <kdasu.kdev@gmail.com>
Cc: linux-i2c@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11336/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add I2C device nodes to BMIPS based BCM7360 platform.
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Kamal Dasu <kdasu.kdev@gmail.com>
Cc: linux-i2c@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11335/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add I2C device nodes to BMIPS based BCM7358 platform.
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Kamal Dasu <kdasu.kdev@gmail.com>
Cc: linux-i2c@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11334/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add I2C device nodes to BMIPS based BCM7346 platform.
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Kamal Dasu <kdasu.kdev@gmail.com>
Cc: linux-i2c@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11333/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

request_mem_region() returns a pointer and not an integer with an error
value. A check for "< 0" on a pointer will cause problems, replace it
with not null checks instead. This was found with sparse.
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
Acked-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11395/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
Acked-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11394/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
Acked-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11393/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
Acked-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11392/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
Acked-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11391/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
Acked-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11390/
Patchwork: https://patchwork.linux-mips.org/patch/11399/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
Acked-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11389/
Patchwork: https://patchwork.linux-mips.org/patch/11398/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>