- 31 May, 2023 5 commits
-
-
Jani Nikula authored
Use localized __diag_push(), __diag_ignore_all() with rationale, and __diag_pop() for specific initializations instead of blanket disabling of -Woverride-init across several files. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230525210653.1048972-1-jani.nikula@intel.com
-
Jani Nikula authored
Sync the drm-intel-gt-next changes back to drm-intel-next via drm-next. Signed-off-by: -
Suraj Kandpal authored
Rename comp_mutex to hdcp_mutex as it does not just protect component related variables which was a terminology used when hdcp was to be binded as a mei component from MTL we use gsc cs which does not use the component binding path for HDCP. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by:
Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230529110740.1522985-4-suraj.kandpal@intel.com
-
Suraj Kandpal authored
Rename variables to move away from master convention to arbiter %s/hdcp.master/hdcp.arbiter %s/i915_hdcp_master/i915_hdcp_arbiter %s/comp_master/comp_arbiter --v2 - delete i915_hdcp_comp_master redundant declaration [Chaitanya] - use %s/foo/bar/ format in commit message to show changes [Chaitanya] --v3 - replace i915_hdcp_comp_master declaration with i915_hdcp_arbiter to avoid any compile fail with old compilers [Chaitanya] Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Suraj Kandpal authored
Rename dev_priv to i915 to keep up with latest code standards. Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
- 28 May, 2023 1 commit
-
-
Dave Airlie authored
Merge tag 'drm-intel-gt-next-2023-05-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - New getparam for querying PXP support and load status Cross-subsystem Changes: - GSC/MEI proxy driver Driver Changes: Fixes/improvements/new stuff: - Avoid clearing pre-allocated framebuffers with the TTM backend (Nirmoy Das) - Implement framebuffer mmap support (Nirmoy Das) - Disable sampler indirect state in bindless heap (Lionel Landwerlin) - Avoid out-of-bounds access when loading HuC (Lucas De Marchi) - Actually return an error if GuC version range check fails (John Harrison) - Get mutex and rpm ref just once in hwm_power_max_write (Ashutosh Dixit) - Disable PL1 power limit when loading GuC firmware (Ashutosh Dixit) - Block in hwmon while waiting for GuC reset to complete (Ashutosh Dixit) - Provide sysfs for SLPC efficient freq (Vinay Belgaumkar) - Add support for total context runtime for GuC back-end (Umesh Nerlige Ramappa) - Enable fdinfo for GuC backends (Umesh Nerlige Ramappa) - Don't capture Gen8 regs on Xe devices (John Harrison) - Fix error capture for virtual engines (John Harrison) - Track patch level versions on reduced version firmware files (John Harrison) - Decode another GuC load failure case (John Harrison) - GuC loading and firmware table handling fixes (John Harrison) - Fix confused register capture list creation (John Harrison) - Dump error capture to kernel log (John Harrison) - Dump error capture to dmesg on CTB error (John Harrison) - Disable rps_boost debugfs when SLPC is used (Vinay Belgaumkar) Future platform enablement: - Disable stolen memory backed FB for A0 [mtl] (Nirmoy Das) - Various refactors for multi-tile enablement (Andi Shyti, Tejas Upadhyay) - Extend Wa_22011802037 to MTL A-step (Madhumitha Tolakanahalli Pradeep) - WA to clear RDOP clock gating [mtl] (Haridhar Kalvala) - Set has_llc=0 [mtl] (Fei Yang) - Define MOCS and PAT tables for MTL (Madhumitha Tolakanahalli Pradeep) - Add PTE encode function [mtl] (Fei Yang) - fix mocs selftest [mtl] (Fei Yang) - Workaround coherency issue for Media [mtl] (Fei Yang) - Add workaround 14018778641 [mtl] (Tejas Upadhyay) - Implement Wa_14019141245 [mtl] (Radhakrishna Sripada) - Fix the wa number for Wa_22016670082 [mtl] (Radhakrishna Sripada) - Use correct huge page manager for MTL (Jonathan Cavitt) - GSC/MEI support for Meteorlake (Alexander Usyskin, Daniele Ceraolo Spurio) - Define GuC firmware version for MTL (John Harrison) - Drop FLAT CCS check [mtl] (Pallavi Mishra) - Add MTL for remapping CCS FBs [mtl] (Clint Taylor) - Meteorlake PXP enablement (Alan Previn) - Do not enable render power-gating on MTL (Andrzej Hajda) - Add MTL performance tuning changes (Radhakrishna Sripada) - Extend Wa_16014892111 to MTL A-step (Radhakrishna Sripada) - PMU multi-tile support (Tvrtko Ursulin) - End support for set caching ioctl [mtl] (Fei Yang) Driver refactors: - Use i915 instead of dev_priv insied the file_priv structure (Andi Shyti) - Use proper parameter naming in for_each_engine() (Andi Shyti) - Use gt_err for GT info (Tejas Upadhyay) - Consolidate duplicated capture list code (John Harrison) - Capture list naming clean up (John Harrison) - Use kernel-doc -Werror when CONFIG_DRM_I915_WERROR=y (Jani Nikula) - Preparation for using PAT index (Fei Yang) - Use pat_index instead of cache_level (Fei Yang) Miscellaneous: - Fix memory leaks in i915 selftests (Cong Liu) - Record GT error for gt failure (Tejas Upadhyay) - Migrate platform-dependent mock hugepage selftests to live (Jonathan Cavitt) - Update the SLPC selftest (Vinay Belgaumkar) - Throw out set() wrapper (Jani Nikula) - Large driver kernel doc cleanup (Jani Nikula) - Fix probe injection CI failures after recent change (John Harrison) - Make unexpected firmware versions an error in debug builds (John Harrison) - Silence UBSAN uninitialized bool variable warning (Ashutosh Dixit) - Fix memory leaks in function live_nop_switch (Cong Liu) Merges: - Merge drm/drm-next into drm-intel-gt-next (Joonas Lahtinen) Signed-off-by:
Dave Airlie <airlied@redhat.com> # Conflicts: # drivers/gpu/drm/i915/gt/uc/intel_guc_capture.c From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZG5SxCWRSkZhTDtY@tursulin-desk
-
- 26 May, 2023 6 commits
-
-
Ville Syrjälä authored
VLV has a so called "wide gamut color correction" unit (WGC). What it is is a 3x3 matrix similar to the later CHV CGM CSC, with less precisions/range. In fact CHV also has the WGC but using it there doesn't really make sense when you have the superior CGM CSC around. Hook up the necessary stuff to expose the WGC as the CTM crtc property. One additional crazy idea that came to mind would be to use the WGC as an output CSC on CHV for YCbCr output. But it would be incompatible with the legacy LUT usage. In fact since the WGC lacks post-offsets we'd probably have to use the legacy LUT to do that final part of the RGB->YCbCr conversion. Sounds doable, but perhaps not worth the hassle. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230413164916.4221-6-ville.syrjala@linux.intel.comReviewed-by:
Uma Shankar <uma.shankar@intel.com>
-
Ville Syrjälä authored
On CHV toggling the CGM CSC on/off while the pipe is running leads to underruns. Looks like we'd have to do the toggling strictly inside the start_of_vblank-frame_start window to avoid this, but that window is less than a scanline so there's no way we can guarantee hitting it. As a workaround let's just leave the CGM CSC permanently enabled. Fortunately the CGM gamma/degamma units don't seem to suffer from this malady. I also tried turning off CGM unit clock gating, but that did not help. Signed-off-by:
-
Ville Syrjälä authored
The CHV CGM CSC coefficients are in s4.12 two's complement format. Fix the CTM->CGM conversion to handle that correctly instead of pretending that the hw coefficients are also in some sign-magnitude format. Signed-off-by:
-
Ville Syrjälä authored
The ilk/snb code is internally fully capable of handling the CTM property, so expose it. Note that we still choose not to expose DEGAMMA_LUT though. The hardware is capable if degamma or gamma, but not both simultanously due to lack of the split gamma mode. Exposing both LUTs might encourage userspace to try enabling both at the same time. Signed-off-by:
-
Nathan Chancellor authored
Clang warns: drivers/gpu/drm/i915/display/intel_display.c:6012:3: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough] case I915_FORMAT_MOD_X_TILED: ^ drivers/gpu/drm/i915/display/intel_display.c:6012:3: note: insert 'break;' to avoid fall-through case I915_FORMAT_MOD_X_TILED: ^ break; 1 error generated. Clang is a little more pedantic than GCC, which does not warn when falling through to a case that is just break or return. Clang's version is more in line with the kernel's own stance in deprecated.rst, which states that all switch/case blocks must end in either break, fallthrough, continue, goto, or return. Add the missing break to silence the warning. Fixes: 93785948 ("drm/i915: Support Async Flip on Linear buffers") Reported-by:kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/202305241902.UvHtMoxa-lkp@intel.com/Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Closes: https://lore.kernel.org/CA+G9fYv68V3ewK0Qj-syQj7qX-hQr0H1MFL=QFNuDoE_J2Zu-g@mail.gmail.com/Reported-by:
Tom Rix <trix@redhat.com> Closes: https://lore.kernel.org/all/20230523125116.1669057-1-trix@redhat.com/Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v6.5: UAPI Changes: Cross-subsystem Changes: * fbdev: Move framebuffer I/O helpers to <asm/fb.h>, fix naming * firmware: Init sysfb as early as possible Core Changes: * DRM scheduler: Rename interfaces * ttm: Store ttm_device_funcs in .rodata * Replace strlcpy() with strscpy() in various places * Cleanups Driver Changes: * bridge: analogix: Fix endless probe loop; samsung-dsim: Support swapping clock/data polarity; tc358767: Use devm_ Cleanups; * gma500: Fix I/O-memory access * panel: boe-tv101wum-nl6: Improve initialization; sharp-ls043t1le001: Mode fixes; simple: Add BOE EV121WXM-N10-1850 plus DT bindings; AddS6D7AA0 plus DT bindings; Cleanups * ssd1307x: Style fixes * sun4i: Release clocks * msm: Fix I/O-memory access * nouveau: Cleanups * shmobile: Support Renesas; Enable framebuffer console; Various fixes * vkms: Fix RGB565 conversion Signed-off-by:
-
- 24 May, 2023 14 commits
-
-
Matt Roper authored
It makes sense to keep the display feature test macros centralized within the display code. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230523195609.73627-7-matthew.d.roper@intel.com
-
Matt Roper authored
For platforms with GMD_ID support (i.e., everything MTL and beyond), identification of the display IP present should be based on the contents of the GMD_ID register rather than a PCI devid match. Note that since GMD_ID readout requires access to the PCI BAR, a slight change to the driver init sequence is needed --- pci_enable_device() is now called before i915_driver_create(). v2: - Fix use of uninitialized i915 pointer in error path if pci_enable_device() fails before the i915 device is created. (lkp) - Use drm_device parameter to intel_display_device_probe. This goes against i915 conventions, but since the primary goal here is to make it easy to call this function from other drivers (like Xe) and since we don't need anything from the i915 structure, this seems like an exception where drm_device is a more natural fit. v3: - Go back do drm_i915_private for intel_display_device_probe. (Jani) - Move forward decl to top of header. (Jani) Signed-off-by:
-
Matt Roper authored
Rather than selecting the display IP and feature flags at the same time the general PCI probing happens, move this step into the display code itself so that it can be more easily re-used outside of i915 (i.e., by the Xe driver). v2: - Make intel_display_device_probe() always return a non-NULL pointer and simplify copying of runtime_defaults. (Andrzej) v3: - Redefine INTEL_VGA_DEVICE/INTEL_QUANTA_DEVICE to eliminate a cast and an include of linux/mod_devicetable.h. (Jani) - Keep explicit memcpy for runtime defaults. (Jani) Cc: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by:
-
Matt Roper authored
Move the runtime info specific to display into display-specific structures as has already been done with the constant display info. v2: - Rename __runtime to __runtime_defaults for more clarity on the purpose. (Andrzej) - Move introduction of DISPLAY_INFO() to previous patch. (Andrzej) - Drop NO_DISPLAY macro. (Andrzej) v3: - Use "{}" instead of "{ 0 }" for empty struct init. (Jani) Cc: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: -
Matt Roper authored
Rather than embeddeding the display's device info within the main device info structure, just provide a pointer to the display-specific structure. This is in preparation for moving the display device info definitions into the display code itself and for eventually allowing the pointer to be assigned at runtime on platforms that use GMD_ID for device identification. In the future, this will also eventually allow the same display device info structures to be used outside the current i915 code (e.g., from the Xe driver). v2: - Move introduction of DISPLAY_INFO() to this patch. (Andrzej) v3: - Also use DISPLAY_INFO() in intel_display_reg_defs.h. (Andrzej) - Use "{}" instead of "{ 0 }" for empty struct init. (Jani) Signed-off-by:Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
Matt Roper authored
Moving display-specific substructure definitions will help keep display more self-contained and make it easier to re-use in other drivers (i.e., Xe) in the future. Signed-off-by:
-
Azeem Shaikh authored
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89Signed-off-by:
Azeem Shaikh <azeemshaikh38@gmail.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230522155228.2336755-1-azeemshaikh38@gmail.com
-
Geert Uytterhoeven authored
The LCD Controller supported by the drm-shmob driver is present on SuperH SH-Mobile SoCs, and on Renesas ARM SH/R-Mobile SoCs. Unfortunately its config option is not visible on either, so the user can never enable the support. Fix this by dropping the dependency on ARM (for SuperH), and by widening the dependency range to ARCH_RENESAS (for ARM). Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Geert Uytterhoeven authored
Set up generic fbdev emulation, to enable support for the Linux console. Use 16 as the preferred depth, as that is a good compromise between colorfulness and resource utilization, and the default of the fbdev driver. Suggested-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Geert Uytterhoeven authored
The SH-Mobile DRM driver uses the legacy drm_crtc_init(), which advertizes only the formats in safe_modeset_formats[] (XR24 and AR24) as being supported. Switch to drm_crtc_init_with_planes(), and advertize all supported (A)RGB modes, so we can use RGB565 as the default mode for the console. Signed-off-by:
-
Geert Uytterhoeven authored
DRM_FORMAT_XRGB8888 aka XR24 is the modus francus of DRM, and should be supported by all drivers. The handling for DRM_FORMAT_XRGB8888 is similar to DRM_FORMAT_ARGB8888, just ignore the alpha channel. Signed-off-by:
-
Geert Uytterhoeven authored
Replace the printing of hexadecimal fourcc format codes by pretty-printed format names, using the "%p4cc" format specifier. Signed-off-by:
-
Azeem Shaikh authored
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230523021943.2406847-1-azeemshaikh38@gmail.com
-
Artur Weber authored
Fixes compilation issues with older GCC versions and Clang after changes introduced in commit 6810bb39 ("drm/panel: Add Samsung S6D7AA0 panel controller driver"). Tested with GCC 13.1.1, GCC 6.4.0 and Clang 16.0.3. Fixes the following errors with Clang: drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:312:14: error: initializer element is not a compile-time constant .drm_mode = s6d7aa0_lsl080al02_mode, ^~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:415:14: error: initializer element is not a compile-time constant .drm_mode = s6d7aa0_lsl080al03_mode, ^~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:443:14: error: initializer element is not a compile-time constant .drm_mode = s6d7aa0_ltl101at01_mode, ^~~~~~~~~~~~~~~~~~~~~~~ 3 errors generated. Fixes the following errors with GCC: drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:312:14: error: initializer element is not constant .drm_mode = s6d7aa0_lsl080al02_mode, ^~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:312:14: note: (near initialization for 's6d7aa0_lsl080al02_desc.drm_mode') drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:415:14: error: initializer element is not constant .drm_mode = s6d7aa0_lsl080al03_mode, ^~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:415:14: note: (near initialization for 's6d7aa0_lsl080al03_desc.drm_mode') drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:443:14: error: initializer element is not constant .drm_mode = s6d7aa0_ltl101at01_mode, ^~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:443:14: note: (near initialization for 's6d7aa0_ltl101at01_desc.drm_mode') Reported-by:
kernelci.org bot <bot@kernelci.org> Link: https://lore.kernel.org/llvm/646c6def.a70a0220.58c1a.903d@mx.google.com Fixes: 6810bb39 ("drm/panel: Add Samsung S6D7AA0 panel controller driver") Signed-off-by:
Artur Weber <aweber.kernel@gmail.com> Acked-by:
Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
-
- 23 May, 2023 6 commits
-
-
Nirmoy Das authored
i915_active_fini() finalizes the debug object, which can occur before the active retires and deactivates the debug object. Wait for one final time before calling i915_active_fini(); Closes:: https://gitlab.freedesktop.org/drm/intel/-/issues/8311Signed-off-by:
Nirmoy Das <nirmoy.das@intel.com> Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by:
-
Azeem Shaikh authored
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89Signed-off-by:
Robert Foss <rfoss@kernel.org> Signed-off-by:
-
Nícolas F. R. A. Prado authored
During probe, the driver registers i2c dummy devices and populates the aux bus, which registers a device for the panel. After doing that, the driver can still defer probe if needed. This ordering of operations is troublesome however, because the deferred probe work will retry probing all pending devices every time a new device is registered. Therefore, if modules need to be loaded in order to satisfy the dependencies for this driver to complete probe, the kernel will stall, since it'll keep trying to probe the anx7625 driver, but never succeed, given that modules would only be loaded after the deferred probe work completes. Two changes are required to avoid this issue: * Move of_find_mipi_dsi_host_by_node(), which can defer probe, to before anx7625_register_i2c_dummy_clients() and devm_of_dp_aux_populate_ep_devices(), which register devices. * Make use of the done_probing callback when populating the aux bus, so that the bridge registration is only done after the panel is probed. This is required because the panel might need to defer probe, but the aux bus population needs the i2c dummy devices working, so this call couldn't just be moved to an earlier point in probe. One caveat is that if the panel is described outside the aux bus, the probe loop issue can still happen, but we don't have a way to avoid it in that case since there's no callback available. With this patch applied, it's possible to boot on mt8192-asurada-spherion with CONFIG_DRM_ANALOGIX_ANX7625=y CONFIG_MTK_MMSYS=m CONFIG_BACKLIGHT_PWM=y and also with CONFIG_DRM_ANALOGIX_ANX7625=y CONFIG_MTK_MMSYS=y CONFIG_BACKLIGHT_PWM=m Fixes: adca62ec ("drm/bridge: anx7625: Support reading edid through aux channel") Fixes: 26933299 ("drm/bridge: anx7625: Return -EPROBE_DEFER if the dsi host was not found") Reported-by:
Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by:
-
Thomas Zimmermann authored
The fbdev framebuffer is in system memory. Store the address in the field 'screen_buffer'. Fixes the following sparse warning. ../drivers/gpu/drm/msm/msm_fbdev.c:124:26: warning: incorrect type in assignment (different address spaces) ../drivers/gpu/drm/msm/msm_fbdev.c:124:26: expected char [noderef] __iomem *screen_base ../drivers/gpu/drm/msm/msm_fbdev.c:124:26: got void * Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230522191701.13406-1-tzimmermann@suse.de
-
Thomas Zimmermann authored
The fbdev framebuffer is I/O memory, so clear it with fb_memset_io(). Fixes the following sparse warning: ../drivers/gpu/drm/gma500/fbdev.c:234:20: warning: incorrect type in argument 1 (different address spaces) ../drivers/gpu/drm/gma500/fbdev.c:234:20: expected void *s ../drivers/gpu/drm/gma500/fbdev.c:234:20: got char [noderef] __iomem *screen_base Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230522190637.7039-1-tzimmermann@suse.de
-
Fei Yang authored
The design is to keep Buffer Object's caching policy immutable through out its life cycle. This patch ends the support for set caching ioctl from MTL onward. While doing that we also set BO's to be 1-way coherent at creation time because GPU is no longer automatically snooping CPU cache. For userspace components needing to fine tune the caching policy for BO's, a follow up patch will extend the GEM_CREATE uAPI to allow them specify caching mode at BO creation time. Signed-off-by:
Fei Yang <fei.yang@intel.com> Reviewed-by:
-
- 22 May, 2023 8 commits
-
-
Tvrtko Ursulin authored
Start exporting frequency and RC6 counters from all tiles. Existing counters keep their names and config values and new one use the namespace added in the previous patch, with the "-gtN" added to their names. Interrupts counter is an odd one off. Because it is the global device counters (not only GT) we choose not to add per tile versions for now. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
Aravind Iddamsetty <aravind.iddamsetty@intel.com> Reviewed-by:
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by:
-
Tvrtko Ursulin authored
Reserve some bits in the counter config namespace which will carry the tile id and prepare the code to handle this. No per tile counters have been added yet. v2: - Fix checkpatch issues - Use 4 bits for gt id in non-engine counters. Drop FIXME. - Set MAX GTs to 4. Drop FIXME. v3: (Ashutosh, Tvrtko) - Drop BUG_ON that would never fire - Make enable u64 - Pull in some code from next patch v4: Set I915_PMU_MAX_GTS to 2 (Tvrtko) v5: s/u64/u32 where needed (Ashutosh) Signed-off-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230519154946.3751971-7-umesh.nerlige.ramappa@intel.com
-
Tvrtko Ursulin authored
We do not want to have timers per tile and waste CPU cycles and energy via multiple wake-up sources, for a relatively un-important task of PMU sampling, so keeping a single timer works well. But we also do not want the first GT which goes idle to turn off the timer. Add some reference counting, via a mask of unparked GTs, to solve this. v2: Drop the check for unparked in i915_sample (Ashutosh) v3: Revert v2 (Tvrtko) Signed-off-by:
-
Tvrtko Ursulin authored
Trivial prep work for full multi-tile enablement later. Signed-off-by:
Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by:
-
Tvrtko Ursulin authored
As we have more and more engines do not waste time sampling the ones no- one is monitoring. Signed-off-by:
-
Tvrtko Ursulin authored
Given how the metrics are already exported, we also need to run sampling over engines from all GTs. Problem of GT frequencies is left for later. Signed-off-by:
-
Tvrtko Ursulin authored
Having it as u64 was a confusing (but harmless) mistake. Also add some asserts to make sure the internal field does not overflow in the future. v2: Fix WARN_ON firing for INTERRUPT event (Umesh) Signed-off-by:
-
Tom Rix authored
smatch reports drivers/gpu/drm/nouveau/nvkm/subdev/gsp/ga102.c:49:1: warning: symbol 'ga102_gsps' was not declared. Should it be static? This variable is only used in its defining file, so it should be static Signed-off-by:
Karol Herbst <kherbst@redhat.com> Signed-off-by:
-
