s/notfication/notification/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s/Identifers/Identifiers/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s/resrved/reserved/
s/within/within/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s/readibility/readability/
s/insufficent/insufficient/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s/initalized/initialized/ ...three different places
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s/facilties/facilities/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Yang Yingliang says:

====================
net: llc: Correct some function names in header

Fix some make W=1 kernel build warnings in net/llc/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the following make W=1 kernel build warning:

 net/llc/llc_pdu.c:36: warning: expecting prototype for pdu_set_pf_bit(). Prototype was for llc_pdu_set_pf_bit() instead
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the following make W=1 kernel build warning:

  net/llc/llc_s_ac.c:38: warning: expecting prototype for llc_sap_action_unit_data_ind(). Prototype was for llc_sap_action_unitdata_ind() instead
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the following make W=1 kernel build warning:

 net/llc/llc_c_ev.c:622: warning: expecting prototype for conn_ev_qlfy_last_frame_eq_1(). Prototype was for llc_conn_ev_qlfy_last_frame_eq_1() instead
 net/llc/llc_c_ev.c:636: warning: expecting prototype for conn_ev_qlfy_last_frame_eq_0(). Prototype was for llc_conn_ev_qlfy_last_frame_eq_0() instead
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix kernel-doc warning introduced in
commit b83e214b ("tipc: add extack messages for bearer/media failure"):

net/tipc/bearer.c:248: warning: Function parameter or member 'extack' not described in 'tipc_enable_bearer'

Fixes: b83e214b ("tipc: add extack messages for bearer/media failure")
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

In this patch, "net: stmmac: support FPE link partner hand-shaking
procedure", priv->plat->fpe_cfg wouldn`t be "devm_kzalloc"ed if
dma_cap->frpsel is 0 (Flexible Rx Parser is not supported in SoC) in
tc_init(). So, fpe_cfg will be remain as NULL and accessing it will cause
kernel panic.

To fix this, move the "devm_kzalloc"ing of priv->plat->fpe_cfg before
dma_cap->frpsel checking in tc_init(). Additionally, checking of
priv->dma_cap.fpesel is added before calling stmmac_fpe_link_state_handle()
as only FPE supported SoC is allowed to call the function.

Below is the kernel panic dump reported by Marek Szyprowski
<m.szyprowski@samsung.com>:

meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=35)
meson8b-dwmac ff3f0000.ethernet eth0: No Safety Features support found
meson8b-dwmac ff3f0000.ethernet eth0: PTP not supported by HW
meson8b-dwmac ff3f0000.ethernet eth0: configuring for phy/rgmii link mode
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000001
Mem abort info:
...
user pgtable: 4k pages, 48-bit VAs, pgdp=00000000044eb000
[0000000000000001] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in: dw_hdmi_i2s_audio dw_hdmi_cec meson_gxl realtek meson_gxbb_wdt snd_soc_meson_axg_sound_card dwmac_generic axg_audio meson_dw_hdmi crct10dif_ce snd_soc_meson_card_utils snd_soc_meson_axg_tdmout panfrost rc_odroid gpu_sched reset_meson_audio_arb meson_ir snd_soc_meson_g12a_tohdmitx snd_soc_meson_axg_frddr sclk_div clk_phase snd_soc_meson_codec_glue dwmac_meson8b snd_soc_meson_axg_fifo stmmac_platform meson_rng meson_drm stmmac rtc_meson_vrtc rng_core meson_canvas pwm_meson dw_hdmi mdio_mux_meson_g12a pcs_xpcs snd_soc_meson_axg_tdm_interface snd_soc_meson_axg_tdm_formatter nvmem_meson_efuse display_connector
CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.12.0-rc4-next-20210325+
Hardware name: Hardkernel ODROID-C4 (DT)
Workqueue: events_power_efficient phylink_resolve
pstate: 20400009 (nzCv daif +PAN -UAO -TCO BTYPE=--)
pc : stmmac_mac_link_up+0x14c/0x348 [stmmac]
lr : stmmac_mac_link_up+0x284/0x348 [stmmac] ...
Call trace:
 stmmac_mac_link_up+0x14c/0x348 [stmmac]
 phylink_resolve+0x104/0x420
 process_one_work+0x2a8/0x718
 worker_thread+0x48/0x460
 kthread+0x134/0x160
 ret_from_fork+0x10/0x18
Code: b971ba60 350007c0 f958c260 f9402000 (39400401)
---[ end trace 0c9deb6c510228aa ]---

Fixes: 5a558611 ("net: stmmac: support FPE link partner hand-shaking
procedure")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove duplicated include from mtk_ppe_offload.c.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xu Jia <xujia39@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Robert Hancock says:

====================
axienet clock additions

Add support to the axienet driver for controlling all of the clocks that
the logic core may utilize.

Changed since v3:
-Added Acked-by to patch 1
-Now applies to net-next tree after earlier patches merged in - code
unchanged from v3

Changed since v2:
-Additional clock description clarification

Changed since v1:
-Clarified clock usages in documentation and code comments
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This driver was only enabling the first clock on the device, regardless
of its name. However, this controller logic can have multiple clocks
which should all be enabled. Add support for enabling additional clocks.
The clock names used are matching those used in the Xilinx version of this
driver as well as the Xilinx device tree generator, except for mgt_clk
which is not present there.

For backward compatibility, if no named clocks are present, the first
clock present is used for determining the MDIO bus clock divider.
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update DT bindings to describe all of the clocks that the axienet
driver will now be able to make use of.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Taehee Yoo says:

====================
mld: change context from atomic to sleepable

This patchset changes the context of MLD module.
Before this patchset, MLD functions are atomic context so it couldn't use
sleepable functions and flags.

There are several reasons why MLD functions are under atomic context.
1. It uses timer API.
Timer expiration functions are executed in the atomic context.
2. atomic locks
MLD functions use rwlock and spinlock to protect their own resources.

So, in order to switch context, this patchset converts resources to use
RCU and removes atomic locks and timer API.

1. The first patch convert from the timer API to delayed work.
Timer API is used for delaying some works.
MLD protocol has a delay mechanism, which is used for replying to a query.
If a listener receives a query from a router, it should send a response
after some delay. But because of timer expire function is executed in
the atomic context, this patch convert from timer API to the delayed work.

2. The fourth patch deletes inet6_dev->mc_lock.
The mc_lock has protected inet6_dev->mc_tomb pointer.
But this pointer is already protected by RTNL and it isn't be used by
datapath. So, it isn't be needed and because of this, many atomic context
critical sections are deleted.

3. The fifth patch convert ip6_sf_socklist to RCU.
ip6_sf_socklist has been protected by ipv6_mc_socklist->sflock(rwlock).
But this is already protected by RTNL So if it is converted to use RCU
in order to be used in the datapath, the sflock is no more needed.
So, its control path context can be switched to sleepable.

4. The sixth patch convert ip6_sf_list to RCU.
The reason for this patch is the same as the previous patch.

5. The seventh patch convert ifmcaddr6 to RCU.
The reason for this patch is the same as the previous patch.

6. Add new workqueues for processing query/report event.
By this patch, query and report events are processed by workqueue
So context is sleepable, not atomic.
While this logic, it acquires RTNL.

7. Add new mc_lock.
The purpose of this lock is to protect per-interface mld data.
Per-interface mld data is usually used by query/report event handler.
So, query/report event workers need only this lock instead of RTNL.
Therefore, it could reduce bottleneck.

Changelog:
v2 -> v3:
1. Do not use msecs_to_jiffies().
(by Cong Wang)
2. Do not add unnecessary rtnl_lock() and rtnl_unlock().
(by Cong Wang)
3. Fix sparse warnings because of rcu annotation.
(by kernel test robot)
   - Remove some rcu_assign_pointer(), which was used for non-rcu pointer.
   - Add union for rcu pointer.
   - Use rcu API in mld_clear_zeros().
   - Remove remained rcu_read_unlock().
   - Use rcu API for tomb resources.
4. withdraw prevopus 2nd and 3rd patch.
   - "separate two flags from ifmcaddr6->mca_flags"
   - "add a new delayed_work, mc_delrec_work"
5. Add 6th and 7th patch.

v1 -> v2:
1. Withdraw unnecessary refactoring patches.
(by Cong Wang, Eric Dumazet, David Ahern)
    a) convert from array to list.
    b) function rename.
2. Separate big one patch into small several patches.
3. Do not rename 'ifmcaddr6->mca_lock'.
In the v1 patch, this variable was changed to 'ifmcaddr6->mca_work_lock'.
But this is actually not needed.
4. Do not use atomic_t for 'ifmcaddr6->mca_sfcount' and
'ipv6_mc_socklist'->sf_count'.
5. Do not add mld_check_leave_group() function.
6. Do not add ip6_mc_del_src_bulk() function.
7. Do not add ip6_mc_add_src_bulk() function.
8. Do not use rcu_read_lock() in the qeth_l3_add_mcast_rtnl().
(by Julian Wiedmann)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The purpose of this lock is to avoid a bottleneck in the query/report
event handler logic.

By previous patches, almost all mld data is protected by RTNL.
So, the query and report event handler, which is data path logic
acquires RTNL too. Therefore if a lot of query and report events
are received, it uses RTNL for a long time.
So it makes the control-plane bottleneck because of using RTNL.
In order to avoid this bottleneck, mc_lock is added.

mc_lock protect only per-interface mld data and per-interface mld
data is used in the query/report event handler logic.
So, no longer rtnl_lock is needed in the query/report event handler logic.
Therefore bottleneck will be disappeared by mc_lock.
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When query/report packets are received, mld module processes them.
But they are processed under BH context so it couldn't use sleepable
functions. So, in order to switch context, the two workqueues are
added which processes query and report event.

In the struct inet6_dev, mc_{query | report}_queue are added so it
is per-interface queue.
And mc_{query | report}_work are workqueue structure.

When the query or report event is received, skb is queued to proper
queue and worker function is scheduled immediately.
Workqueues and queues are protected by spinlock, which is
mc_{query | report}_lock, and worker functions are protected by RTNL.
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ifmcaddr6 has been protected by inet6_dev->lock(rwlock) so that
the critical section is atomic context. In order to switch this context,
changing locking is needed. The ifmcaddr6 actually already protected by
RTNL So if it's converted to use RCU, its control path context can be
switched to sleepable.
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ip6_sf_list has been protected by mca_lock(spin_lock) so that the
critical section is atomic context. In order to switch this context,
changing locking is needed. The ip6_sf_list actually already protected
by RTNL So if it's converted to use RCU, its control path context can
be switched to sleepable.
But It doesn't remove mca_lock yet because ifmcaddr6 isn't converted
to RCU yet. So, It's not fully converted to the sleepable context.
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The sflist has been protected by rwlock so that the critical section
is atomic context.
In order to switch this context, changing locking is needed.
The sflist actually already protected by RTNL So if it's converted
to use RCU, its control path context can be switched to sleepable.
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The purpose of mc_lock is to protect inet6_dev->mc_tomb.
But mc_tomb is already protected by RTNL and all functions,
which manipulate mc_tomb are called under RTNL.
So, mc_lock is not needed.
Furthermore, it is spinlock so the critical section is atomic.
In order to reduce atomic context, it should be removed.
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mcast.c has several timers for delaying works.
Timer's expire handler is working under atomic context so it can't use
sleepable things such as GFP_KERNEL, mutex, etc.
In order to use sleepable APIs, it converts from timers to delayed work.
But there are some critical sections, which is used by both process
and BH context. So that it still uses spin_lock_bh() and rwlock.
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
ethtool: fec: ioctl kdoc touch ups

A few touch ups from v1 review.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

kdoc does not have good support for documenting defines,
and we can't abuse the enum documentation because it
generates warnings.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Dan points out we need to use the mask not the bit (which is 0).
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 42ce127d ("ethtool: fec: sanitize ethtool_fecparam->fec")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

struct ethtool_fecparam::reserved can't be used in SET, because
ethtool user space doesn't zero-initialize the structure.
Make this clear.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mat Martineau says:

====================
MPTCP: Cleanup and address advertisement fixes

This patch series contains cleanup and fixes we have been testing in the
MPTCP tree. MPTCP uses TCP option headers to advertise additional
address information after an initial connection is established. The main
fixes here deal with making those advertisements more reliable and
improving the way subflows are created after an advertisement is
received.

Patches 1, 2, 4, 10, and 12 are for various cleanup or refactoring.

Patch 3 skips an extra connection attempt if there's already a subflow
connection for the newly received advertisement.

Patches 5, 6, and 7 make sure that the next address is advertised when
there are multiple addresses to share, the advertisement has been
retried, and the peer has not echoed the advertisement. Self tests are
updated.

Patches 8 and 9 fix a problem similar to 5/6/7, but covers a case where
the failure was due to a subflow connection not completing.

Patches 11 and 13 send a bare ack to revoke an advertisement rather than
waiting for other activity to trigger a packet send. This mirrors the
way acks are sent for new advertisements. Self test is included.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds testcases for signalling multi valid and invalid
addresses for both signal_address_tests and remove_tests.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since mptcp_pm_nl_add_addr_send_ack is now used for both ADD_ADDR and
RM_ADDR cases, rename it to mptcp_pm_nl_addr_send_ack.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch changes the sending ACK conditions for the ADD_ADDR, send an
ACK packet for RM_ADDR too.

In mptcp_pm_remove_addr, invoke mptcp_pm_nl_add_addr_send_ack to send
the ACK packet.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

msk->pm.addr_signal is cleared in mptcp_pm_add_addr_signal, no need to
clear it in mptcp_pm_nl_add_addr_send_ack again. Drop it.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When an invalid address was announced, the subflow couldn't be created
for this address. Therefore mptcp_pm_nl_subflow_established couldn't be
invoked. Then the next addresses in the local address list didn't have a
chance to be announced.

This patch invokes the new function mptcp_pm_add_addr_echoed when the
address is echoed. In it, use mptcp_lookup_anno_list_by_saddr to check
whether this address is in the anno_list. If it is, PM schedules the
status MPTCP_PM_SUBFLOW_ESTABLISHED to invoke
mptcp_pm_create_subflow_or_signal_addr to deal with the next address in
the local address list.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch exported the static function lookup_anno_list_by_saddr, and
renamed it to mptcp_lookup_anno_list_by_saddr.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch added the timeout testcases for multi addresses, valid and
invalid.

These testcases need to transmit 8 ADD_ADDRs, so add a new speed level
'least' to set 10 to mptcp_connect to slow down the transmitting process.
The original speed level 'slow' still uses 50.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In some testcases, we need to slow down the transmitting process. This
patch added a new argument named cfg_do_w for cfg_remove to allow the
caller to pass an argument to cfg_remove.

In do_rnd_write, use this cfg_do_w to control the transmitting speed.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch called mptcp_pm_subflow_established to move to the next address
when an ADD_ADDR has been retransmitted the maximum number of times.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch drops the unused parameter subflow in
mptcp_pm_subflow_established().

Fixes: 926bdeab ("mptcp: Implement path manager interface commands")
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>