- 27 Oct, 2017 31 commits
-
-
David Howells authored
commit 363b02da upstream. Consolidate KEY_FLAG_INSTANTIATED, KEY_FLAG_NEGATIVE and the rejection error into one field such that: (1) The instantiation state can be modified/read atomically. (2) The error can be accessed atomically with the state. (3) The error isn't stored unioned with the payload pointers. This deals with the problem that the state is spread over three different objects (two bits and a separate variable) and reading or updating them atomically isn't practical, given that not only can uninstantiated keys change into instantiated or rejected keys, but rejected keys can also turn into instantiated keys - and someone accessing the key might not be using any locking. The main side effect of this problem is that what was held in the payload may change, depending on the state. For instance, you might observe the key to be in the rejected state. You then read the cached error, but if the key semaphore wasn't locked, the key might've become instantiated between the two reads - and you might now have something in hand that isn't actually an error code. The state is now KEY_IS_UNINSTANTIATED, KEY_IS_POSITIVE or a negative error code if the key is negatively instantiated. The key_is_instantiated() function is replaced with key_is_positive() to avoid confusion as negative keys are also 'instantiated'. Additionally, barriering is included: (1) Order payload-set before state-set during instantiation. (2) Order state-read before payload-read when using the key. Further separate barriering is necessary if RCU is being used to access the payload content after reading the payload pointers. Fixes: 146aa8b1 ("KEYS: Merge the type-specific data with the payload data") Reported-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Biggers authored
commit d60b5b78 upstream. When an fscrypt-encrypted file is opened, we request the file's master key from the keyrings service as a logon key, then access its payload. However, a revoked key has a NULL payload, and we failed to check for this. request_key() *does* skip revoked keys, but there is still a window where the key can be revoked before we acquire its semaphore. Fix it by checking for a NULL payload, treating it like a key which was already revoked at the time it was requested. Fixes: 88bd6ccd ("ext4 crypto: add encryption key management facilities") Reviewed-by:
James Morris <james.l.morris@oracle.com> Cc: <stable@vger.kernel.org> [v4.1+] Signed-off-by:
-
Jaegeuk Kim authored
commit 745e8490 upstream. This patch adopts: ext4 crypto: add missing locking for keyring_key access Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Jaegeuk Kim authored
commit 66aa3e12 upstream. This patch adopts: ext4 crypto: replace some BUG_ON()'s with error checks Signed-off-by:
-
Oleg Nesterov authored
commit 18f649ef upstream. The PF_EXITING check in task_wants_autogroup() is no longer needed. Remove it, but see the next patch. However the comment is correct in that autogroup_move_group() must always change task_group() for every thread so the sysctl_ check is very wrong; we can race with cgroups and even sys_setsid() is not safe because a task running with task_group() == ag->tg must participate in refcounting: int main(void) { int sctl = open("/proc/sys/kernel/sched_autogroup_enabled", O_WRONLY); assert(sctl > 0); if (fork()) { wait(NULL); // destroy the child's ag/tg pause(); } assert(pwrite(sctl, "1\n", 2, 0) == 2); assert(setsid() > 0); if (fork()) pause(); kill(getppid(), SIGKILL); sleep(1); // The child has gone, the grandchild runs with kref == 1 assert(pwrite(sctl, "0\n", 2, 0) == 2); assert(setsid() > 0); // runs with the freed ag/tg for (;;) sleep(1); return 0; } crashes the kernel. It doesn't really need sleep(1), it doesn't matter if autogroup_move_group() actually frees the task_group or this happens later. Reported-by:
Vern Lovejoy <vlovejoy@redhat.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: hartsjc@redhat.com Cc: vbendel@redhat.com Link: http://lkml.kernel.org/r/20161114184609.GA15965@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org> [sumits: submit to 4.4 LTS, post testing on Hikey] Signed-off-by:
-
John David Anglin authored
commit 374b3bf8 upstream. As discussed on the debian-hppa list, double-wordcompare and exchange operations fail on 32-bit kernels. Looking at the code, I realized that the ",ma" completer does the wrong thing in the "ldw,ma 4(%r26), %r29" instruction. This increments %r26 and causes the following store to write to the wrong location. Note by Helge Deller: The patch applies cleanly to stable kernel series if this upstream commit is merged in advance: f4125cfd ("parisc: Avoid trashing sr2 and sr3 in LWS code"). Signed-off-by:
John David Anglin <dave.anglin@bell.net> Tested-by:
Christoph Biedl <debian.axhn@manchmal.in-ulm.de> Fixes: 89206491 ("parisc: Implement new LWS CAS supporting 64 bit operations.") Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
John David Anglin authored
commit f4125cfd upstream. There is no need to trash sr2 and sr3 in the Light-weight syscall (LWS). sr2 already points to kernel space (it's zero in userspace, otherwise syscalls wouldn't work), and since the LWS code is executed in userspace, we can simply ignore to preload sr3. Signed-off-by:
-
Eric Sesterhenn authored
commit 68a1fdbb upstream. The ASN.1 parser does not necessarily set the sinfo field, this patch prevents a NULL pointer dereference on broken input. Fixes: 99db4435 ("PKCS#7: Appropriately restrict authenticated attributes and content type") Signed-off-by:
Eric Sesterhenn <eric.sesterhenn@x41-dsec.de> Signed-off-by:
-
David Howells authored
commit 60ff5b2f upstream. Currently, when passed a key that already exists, add_key() will call the key's ->update() method if such exists. But this is heavily broken in the case where the key is uninstantiated because it doesn't call __key_instantiate_and_link(). Consequently, it doesn't do most of the things that are supposed to happen when the key is instantiated, such as setting the instantiation state, clearing KEY_FLAG_USER_CONSTRUCT and awakening tasks waiting on it, and incrementing key->user->nikeys. It also never takes key_construction_mutex, which means that ->instantiate() can run concurrently with ->update() on the same key. In the case of the "user" and "logon" key types this causes a memory leak, at best. Maybe even worse, the ->update() methods of the "encrypted" and "trusted" key types actually just dereference a NULL pointer when passed an uninstantiated key. Change key_create_or_update() to wait interruptibly for the key to finish construction before continuing. This patch only affects *uninstantiated* keys. For now we still allow a negatively instantiated key to be updated (thereby positively instantiating it), although that's broken too (the next patch fixes it) and I'm not sure that anyone actually uses that functionality either. Here is a simple reproducer for the bug using the "encrypted" key type (requires CONFIG_ENCRYPTED_KEYS=y), though as noted above the bug pertained to more than just the "encrypted" key type: #include <stdlib.h> #include <unistd.h> #include <keyutils.h> int main(void) { int ringid = keyctl_join_session_keyring(NULL); if (fork()) { for (;;) { const char payload[] = "update user:foo 32"; usleep(rand() % 10000); add_key("encrypted", "desc", payload, sizeof(payload), ringid); keyctl_clear(ringid); } } else { for (;;) request_key("encrypted", "desc", "callout_info", ringid); } } It causes: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: encrypted_update+0xb0/0x170 PGD 7a178067 P4D 7a178067 PUD 77269067 PMD 0 PREEMPT SMP CPU: 0 PID: 340 Comm: reproduce Tainted: G D 4.14.0-rc1-00025-g428490e3 #796 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff8a467a39a340 task.stack: ffffb15c40770000 RIP: 0010:encrypted_update+0xb0/0x170 RSP: 0018:ffffb15c40773de8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8a467a275b00 RCX: 0000000000000000 RDX: 0000000000000005 RSI: ffff8a467a275b14 RDI: ffffffffb742f303 RBP: ffffb15c40773e20 R08: 0000000000000000 R09: ffff8a467a275b17 R10: 0000000000000020 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8a4677057180 R15: ffff8a467a275b0f FS: 00007f5d7fb08700(0000) GS:ffff8a467f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 0000000077262005 CR4: 00000000001606f0 Call Trace: key_create_or_update+0x2bc/0x460 SyS_add_key+0x10c/0x1d0 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x7f5d7f211259 RSP: 002b:00007ffed03904c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000f8 RAX: ffffffffffffffda RBX: 000000003b2a7955 RCX: 00007f5d7f211259 RDX: 00000000004009e4 RSI: 00000000004009ff RDI: 0000000000400a04 RBP: 0000000068db8bad R08: 000000003b2a7955 R09: 0000000000000004 R10: 000000000000001a R11: 0000000000000246 R12: 0000000000400868 R13: 00007ffed03905d0 R14: 0000000000000000 R15: 0000000000000000 Code: 77 28 e8 64 34 1f 00 45 31 c0 31 c9 48 8d 55 c8 48 89 df 48 8d 75 d0 e8 ff f9 ff ff 85 c0 41 89 c4 0f 88 84 00 00 00 4c 8b 7d c8 <49> 8b 75 18 4c 89 ff e8 24 f8 ff ff 85 c0 41 89 c4 78 6d 49 8b RIP: encrypted_update+0xb0/0x170 RSP: ffffb15c40773de8 CR2: 0000000000000018 Reported-by:
-
Eric Biggers authored
commit 192cabd6 upstream. digsig_verify() requests a user key, then accesses its payload. However, a revoked key has a NULL payload, and we failed to check for this. request_key() *does* skip revoked keys, but there is still a window where the key can be revoked before we acquire its semaphore. Fix it by checking for a NULL payload, treating it like a key which was already revoked at the time it was requested. Fixes: 051dbb91 ("crypto: digital signature verification support") Reviewed-by:
-
Eric Biggers authored
commit 13923d08 upstream. A key of type "encrypted" references a "master key" which is used to encrypt and decrypt the encrypted key's payload. However, when we accessed the master key's payload, we failed to handle the case where the master key has been revoked, which sets the payload pointer to NULL. Note that request_key() *does* skip revoked keys, but there is still a window where the key can be revoked before we acquire its semaphore. Fix it by checking for a NULL payload, treating it like a key which was already revoked at the time it was requested. This was an issue for master keys of type "user" only. Master keys can also be of type "trusted", but those cannot be revoked. Fixes: 7e70cb49 ("keys: add new key-type encrypted") Reviewed-by:
-
Larry Finger authored
commit b8b8b163 upstream. In commit 40b368af ("rtlwifi: Fix alignment issues"), the read of REG_DBI_READ was changed from 16 to 8 bits. For unknown reasonsi this change results in reduced stability for the wireless connection. This regression was located using bisection. Fixes: 40b368af ("rtlwifi: Fix alignment issues") Reported-and-tested-by:
James Cameron <quozl@laptop.org> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
David Kozub authored
commit eb39a7c0 upstream. The interrupt handler mfgpt_tick() is not robust versus spurious interrupts which happen before the clock event device is registered and fully initialized. The reason is that the safe guard against spurious interrupts solely checks for the clockevents shutdown state, but lacks a check for detached state. If the interrupt hits while the device is in detached state it passes the safe guard and dereferences the event handler call back which is NULL. Add the missing state check. Fixes: 8f9327cb ("clockevents/drivers/cs5535: Migrate to new 'set-state' interface") Suggested-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by:
-
Jan Luebbe authored
commit 2bbbd963 upstream. At least the Armada XP SoC supports 4GB on a single DRAM window. Because the size register values contain the actual size - 1, the MSB is set in that case. For example, the SDRAM window's control register's value is 0xffffffe1 for 4GB (bits 31 to 24 contain the size). The MBUS driver reads back each window's size from registers and calculates the actual size as (control_reg | ~DDR_SIZE_MASK) + 1, which overflows for 32 bit values, resulting in other miscalculations further on (a bad RAM window for the CESA crypto engine calculated by mvebu_mbus_setup_cpu_target_nooverlap() in my case). This patch changes the type in 'struct mbus_dram_window' from u32 to u64, which allows us to keep using the same register calculation code in most MBUS-using drivers (which calculate ->size - 1 again). Fixes: fddddb52 ("bus: introduce an Marvell EBU MBus driver") Signed-off-by:
Jan Luebbe <jlu@pengutronix.de> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Arnd Bergmann authored
commit c503dd38 upstream. With KASAN and a couple of other patches applied, this driver is one of the few remaining ones that actually use more than 2048 bytes of kernel stack: broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function 'wlc_phy_workarounds_nphy_gainctrl': broadcom/brcm80211/brcmsmac/phy/phy_n.c:16065:1: warning: the frame size of 3264 bytes is larger than 2048 bytes [-Wframe-larger-than=] broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function 'wlc_phy_workarounds_nphy': broadcom/brcm80211/brcmsmac/phy/phy_n.c:17138:1: warning: the frame size of 2864 bytes is larger than 2048 bytes [-Wframe-larger-than=] Here, I'm reducing the stack size by marking as many local variables as 'static const' as I can without changing the actual code. This is the first of three patches to improve the stack usage in this driver. It would be good to have this backported to stabl kernels to get all drivers in 'allmodconfig' below the 2048 byte limit so we can turn on the frame warning again globally, but I realize that the patch is larger than the normal limit for stable backports. The other two patches do not need to be backported. Acked-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Pontus Andersson authored
commit c6ebcedb upstream. Commit b6c159a9 ("i2c: ismt: Don't duplicate the receive length for block reads") broke I2C block reads. It aimed to fix normal SMBus block read, but changed the correct behavior of I2C block read in the process. According to Documentation/i2c/smbus-protocol, one vital difference between normal SMBus block read and I2C block read is that there is no byte count prefixed in the data sent on the wire: SMBus Block Read: i2c_smbus_read_block_data() S Addr Wr [A] Comm [A] S Addr Rd [A] [Count] A [Data] A [Data] A ... A [Data] NA P I2C Block Read: i2c_smbus_read_i2c_block_data() S Addr Wr [A] Comm [A] S Addr Rd [A] [Data] A [Data] A ... A [Data] NA P Therefore the two transaction types need to be processed differently in the driver by copying of the dma_buffer as done previously for the I2C_SMBUS_I2C_BLOCK_DATA case. Fixes: b6c159a9 ("i2c: ismt: Don't duplicate the receive length for block reads") Signed-off-by:
Pontus Andersson <epontan@gmail.com> Tested-by:
Stephen Douthit <stephend@adiengineering.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Takashi Iwai authored
commit 6bf88a34 upstream. While converting the error messages to the standard macros in the commit 4e76a883 ("ALSA: hda - Replace with standard printk"), a superfluous '-' slipped in the code mistakenly. Its influence is almost negligible, merely shows a dB value as negative integer instead of positive integer (or vice versa) in the rare error message. So let's kill this embarrassing byte to show more correct value. Fixes: 4e76a883 ("ALSA: hda - Replace with standard printk") Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Ben Hutchings authored
commit 8009d506 upstream. The 'use' locking macros are no-ops if neither SMP or SND_DEBUG is enabled. This might once have been OK in non-preemptible configurations, but even in that case snd_seq_read() may sleep while relying on a 'use' lock. So always use the proper implementations. Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Ben Skeggs authored
commit 77913bbc upstream. Even though we've zeroed the PDE, the GPU may have cached the PD, so we need to flush when deleting them. Noticed while working on replacement MMU code, but a backport might be a good idea, so let's fix it in the current code too. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Ilia Mirkin authored
commit 194d68dd upstream. G92's seem to require some additional bit of initialization before the BSP engine can work. It feels like clocks are not set up for the underlying VLD engine, which means that all commands submitted to the xtensa chip end up hanging. VP seems to work fine though. This still allows people to force-enable the bsp engine if they want to play around with it, but makes it harder for the card to hang by default. Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
-
Stefan Mätje authored
commit 72d92e86 upstream. The dlc member of the struct rx_msg contains also the ESD_RTR flag to mark received RTR frames. Without the fix the can_dlc value for received RTR frames would always be set to 8 by get_can_dlc() instead of the received value. Fixes: 96d8e903 ("can: Add driver for esd CAN-USB/2 device") Signed-off-by:
Stefan Mätje <stefan.maetje@esd.eu> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Jonathan Liu authored
commit 445ef615 upstream. The sunxi musb has a bug where sometimes it will generate a babble error on device disconnect instead of a disconnect IRQ. When this happens the musb controller switches from host mode to device mode (it clears MUSB_DEVCTL_HM/MUSB_DEVCTL_SESSION and sets MUSB_DEVCTL_BDEVICE) and gets stuck in this state. The babble error is misdetected as a bus reset because MUSB_DEVCTL_HM was cleared. To fix this, use is_host_active() rather than (devctl & MUSB_DEVCTL_HM) to detect babble error so that sunxi musb babble recovery can handle it by restoring the mode. This information is provided by the driver logic and does not rely on register contents. Signed-off-by:
Jonathan Liu <net147@gmail.com> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Jonathan Liu authored
commit 6ed05c68 upstream. This fixes a kernel oops when unloading the driver due to usb_put_phy being called after usb_phy_generic_unregister when the device is detached. Calling usb_phy_generic_unregister causes x->dev->driver to be NULL in usb_put_phy and results in a NULL pointer dereference. Signed-off-by:
-
Wolfgang Grandegger authored
commit 97819f94 upstream. If sending messages with no cable connected, it quickly happens that there is no more TX context available. Then "gs_can_start_xmit()" returns with "NETDEV_TX_BUSY" and the upper layer does retry immediately keeping the CPU busy. To fix that issue, I moved "atomic_dec(&dev->active_tx_urbs)" from "gs_usb_xmit_callback()" to the TX done handling in "gs_usb_receive_bulk_callback()". Renaming "active_tx_urbs" to "active_tx_contexts" and moving it into "gs_[alloc|free]_tx_context()" would also make sense. Signed-off-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
-
Jussi Laako authored
commit 9bb201a5 upstream. Add native DSD support quirk for Pro-Ject Pre Box S2 Digital USB id 2772:0230. Signed-off-by:
Jussi Laako <jussi@sonarnerd.net> Signed-off-by:
-
Mathias Nyman authored
commit 1ac7db63 upstream. If the connect status change is set during reset signaling, but the status remains connected just retry port reset. This solves an issue with connecting a 90W HP Thunderbolt 3 dock with a Lenovo Carbon x1 (5th generation) which causes a 30min loop of a high speed device being re-discovererd before usb ports starts working. [...] [ 389.023845] usb 3-1: new high-speed USB device number 55 using xhci_hcd [ 389.491841] usb 3-1: new high-speed USB device number 56 using xhci_hcd [ 389.959928] usb 3-1: new high-speed USB device number 57 using xhci_hcd [...] This is caused by a high speed device that doesn't successfully go to the enabled state after the second port reset. Instead the connection bounces (connected, with connect status change), bailing out completely from enumeration just to restart from scratch. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1716332Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Felipe Balbi authored
commit 2811501e upstream. This keyboard doesn't implement Get String descriptors properly even though string indexes are valid. What happens is that when requesting for the String descriptor, the device disconnects and reconnects. Without this quirk, this loop will continue forever. Cc: Alan Stern <stern@rowland.harvard.edu> Reported-by:
Владимир Мартьянов <vilgeforce@gmail.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Maksim Salau authored
commit 765fb2f1 upstream. Elatec TWN3 has the union descriptor on data interface. This results in failure to bind the device to the driver with the following log: usb 1-1.2: new full speed USB device using streamplug-ehci and address 4 usb 1-1.2: New USB device found, idVendor=09d8, idProduct=0320 usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.2: Product: RFID Device (COM) usb 1-1.2: Manufacturer: OEM cdc_acm 1-1.2:1.0: Zero length descriptor references cdc_acm: probe of 1-1.2:1.0 failed with error -22 Adding the NO_UNION_NORMAL quirk for the device fixes the issue. `lsusb -v` of the device: Bus 001 Device 003: ID 09d8:0320 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 32 idVendor 0x09d8 idProduct 0x0320 bcdDevice 3.00 iManufacturer 1 OEM iProduct 2 RFID Device (COM) iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 67 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 250mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 2 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 CDC Header: bcdCDC 1.10 CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 CDC ACM: bmCapabilities 0x06 sends break line coding and serial state CDC Union: bMasterInterface 0 bSlaveInterface 1 Device Status: 0x0000 (Bus Powered) Signed-off-by:
Maksim Salau <msalau@iotecha.com> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Johan Hovold authored
commit 31dc3f81 upstream. Add device-id entry for (Honeywell) Metrologic MS7820 bar code scanner. The device has two interfaces (in this mode?); a vendor-specific interface with two interrupt endpoints and a second HID interface, which we do not bind to. Reported-by:
Ladislav Dobrovsky <ladislav.dobrovsky@gmail.com> Tested-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Alan Stern authored
commit 1c0edc36 upstream. Andrey used the syzkaller fuzzer to find an out-of-bounds memory access in usb_get_bos_descriptor(). The code wasn't checking that the next usb_dev_cap_header structure could fit into the remaining buffer space. This patch fixes the error and also reduces the bNumDeviceCaps field in the header to match the actual number of capabilities found, in cases where there are fewer than expected. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Hans de Goede authored
commit 845d584f upstream. Taking the uurb->buffer_length userspace passes in as a maximum for the actual urbs transfer_buffer_length causes 2 serious issues: 1) It breaks isochronous support for all userspace apps using libusb, as existing libusb versions pass in 0 for uurb->buffer_length, relying on the kernel using the lenghts of the usbdevfs_iso_packet_desc descriptors passed in added together as buffer length. This for example causes redirection of USB audio and Webcam's into virtual machines using qemu-kvm to no longer work. This is a userspace ABI break and as such must be reverted. Note that the original commit does not protect other users / the kernels memory, it only stops the userspace process making the call from shooting itself in the foot. 2) It may cause the kernel to program host controllers to DMA over random memory. Just as the devio code used to only look at the iso_packet_desc lenghts, the host drivers do the same, relying on the submitter of the urbs to make sure the entire buffer is large enough and not checking transfer_buffer_length. But the "USB: devio: Don't corrupt user memory" commit now takes the userspace provided uurb->buffer_length for the buffer-size while copying over the user-provided iso_packet_desc lengths 1:1, allowing the user to specify a small buffer size while programming the host controller to dma a lot more data. (Atleast the ohci, uhci, xhci and fhci drivers do not check transfer_buffer_length for isoc transfers.) This reverts commit fa1ed74e ("USB: devio: Don't corrupt user memory") fixing both these issues. Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
-
- 21 Oct, 2017 9 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This reverts commit 01b3db29 which is commit 1a5c2d1d upstream. Ben writes: This fixes a bug introduced in 4.6 by commit 465893e1 "tty: goldfish: support platform_device with id -1". For earlier kernel versions, it *introduces* a bug. So let's drop it. Reported-by:
-
Arnd Bergmann authored
[ Upstream commit a578884f ] Without the Kconfig dependency, we can get this warning: warning: ACPI_CPPC_CPUFREQ selects ACPI_CPPC_LIB which has unmet direct dependencies (ACPI && ACPI_PROCESSOR) Fixes: 5477fb3b (ACPI / CPPC: Add a CPUFreq driver for use with CPPC) Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
-
Kinglong Mee authored
[ Upstream commit f7d1ddbe ] The rpccred gotten from rpc_lookup_machine_cred() should be put when state is shutdown. Signed-off-by:
Kinglong Mee <kinglongmee@gmail.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Varun Prakash authored
[ Upstream commit 4d65491c ] In case of unsolicited data for the first sequence seq_end_offset must be set to minimum of total data length and FirstBurstLength, so do not add cmd->write_data_done to the min of total data length and FirstBurstLength. This patch avoids that with ImmediateData=Yes, InitialR2T=No, MaxXmitDataSegmentLength < FirstBurstLength that a WRITE command with IO size above FirstBurstLength triggers sequence error messages, for example Set following parameters on target (linux-4.8.12) ImmediateData = Yes InitialR2T = No MaxXmitDataSegmentLength = 8k FirstBurstLength = 64k Log in from Open iSCSI initiator and execute dd if=/dev/zero of=/dev/sdb bs=128k count=1 oflag=direct Error messages on target Command ITT: 0x00000035 with Offset: 65536, Length: 8192 outside of Sequence 73728:131072 while DataSequenceInOrder=Yes. Command ITT: 0x00000035, received DataSN: 0x00000001 higher than expected 0x00000000. Unable to perform within-command recovery while ERL=0. Signed-off-by:
Varun Prakash <varun@chelsio.com> [ bvanassche: Use min() instead of open-coding it / edited patch description ] Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Dmitry V. Levin authored
[ Upstream commit 72aa107d ] Include <linux/in6.h> to fix the following linux/mroute6.h userspace compilation errors: /usr/include/linux/mroute6.h:80:22: error: field 'mf6cc_origin' has incomplete type struct sockaddr_in6 mf6cc_origin; /* Origin of mcast */ /usr/include/linux/mroute6.h:81:22: error: field 'mf6cc_mcastgrp' has incomplete type struct sockaddr_in6 mf6cc_mcastgrp; /* Group in question */ /usr/include/linux/mroute6.h:91:22: error: field 'src' has incomplete type struct sockaddr_in6 src; /usr/include/linux/mroute6.h:92:22: error: field 'grp' has incomplete type struct sockaddr_in6 grp; /usr/include/linux/mroute6.h:132:18: error: field 'im6_src' has incomplete type struct in6_addr im6_src, im6_dst; /usr/include/linux/mroute6.h:132:27: error: field 'im6_dst' has incomplete type struct in6_addr im6_src, im6_dst; Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dmitry V. Levin authored
[ Upstream commit feb0869d ] Consistently use types from linux/types.h to fix the following linux/rds.h userspace compilation errors: /usr/include/linux/rds.h:106:2: error: unknown type name 'uint8_t' uint8_t name[32]; /usr/include/linux/rds.h:107:2: error: unknown type name 'uint64_t' uint64_t value; /usr/include/linux/rds.h:117:2: error: unknown type name 'uint64_t' uint64_t next_tx_seq; /usr/include/linux/rds.h:118:2: error: unknown type name 'uint64_t' uint64_t next_rx_seq; /usr/include/linux/rds.h:121:2: error: unknown type name 'uint8_t' uint8_t transport[TRANSNAMSIZ]; /* null term ascii */ /usr/include/linux/rds.h:122:2: error: unknown type name 'uint8_t' uint8_t flags; /usr/include/linux/rds.h:129:2: error: unknown type name 'uint64_t' uint64_t seq; /usr/include/linux/rds.h:130:2: error: unknown type name 'uint32_t' uint32_t len; /usr/include/linux/rds.h:135:2: error: unknown type name 'uint8_t' uint8_t flags; /usr/include/linux/rds.h:139:2: error: unknown type name 'uint32_t' uint32_t sndbuf; /usr/include/linux/rds.h:144:2: error: unknown type name 'uint32_t' uint32_t rcvbuf; /usr/include/linux/rds.h:145:2: error: unknown type name 'uint64_t' uint64_t inum; /usr/include/linux/rds.h:153:2: error: unknown type name 'uint64_t' uint64_t hdr_rem; /usr/include/linux/rds.h:154:2: error: unknown type name 'uint64_t' uint64_t data_rem; /usr/include/linux/rds.h:155:2: error: unknown type name 'uint32_t' uint32_t last_sent_nxt; /usr/include/linux/rds.h:156:2: error: unknown type name 'uint32_t' uint32_t last_expected_una; /usr/include/linux/rds.h:157:2: error: unknown type name 'uint32_t' uint32_t last_seen_una; /usr/include/linux/rds.h:164:2: error: unknown type name 'uint8_t' uint8_t src_gid[RDS_IB_GID_LEN]; /usr/include/linux/rds.h:165:2: error: unknown type name 'uint8_t' uint8_t dst_gid[RDS_IB_GID_LEN]; /usr/include/linux/rds.h:167:2: error: unknown type name 'uint32_t' uint32_t max_send_wr; /usr/include/linux/rds.h:168:2: error: unknown type name 'uint32_t' uint32_t max_recv_wr; /usr/include/linux/rds.h:169:2: error: unknown type name 'uint32_t' uint32_t max_send_sge; /usr/include/linux/rds.h:170:2: error: unknown type name 'uint32_t' uint32_t rdma_mr_max; /usr/include/linux/rds.h:171:2: error: unknown type name 'uint32_t' uint32_t rdma_mr_size; /usr/include/linux/rds.h:212:9: error: unknown type name 'uint64_t' typedef uint64_t rds_rdma_cookie_t; /usr/include/linux/rds.h:215:2: error: unknown type name 'uint64_t' uint64_t addr; /usr/include/linux/rds.h:216:2: error: unknown type name 'uint64_t' uint64_t bytes; /usr/include/linux/rds.h:221:2: error: unknown type name 'uint64_t' uint64_t cookie_addr; /usr/include/linux/rds.h:222:2: error: unknown type name 'uint64_t' uint64_t flags; /usr/include/linux/rds.h:228:2: error: unknown type name 'uint64_t' uint64_t cookie_addr; /usr/include/linux/rds.h:229:2: error: unknown type name 'uint64_t' uint64_t flags; /usr/include/linux/rds.h:234:2: error: unknown type name 'uint64_t' uint64_t flags; /usr/include/linux/rds.h:240:2: error: unknown type name 'uint64_t' uint64_t local_vec_addr; /usr/include/linux/rds.h:241:2: error: unknown type name 'uint64_t' uint64_t nr_local; /usr/include/linux/rds.h:242:2: error: unknown type name 'uint64_t' uint64_t flags; /usr/include/linux/rds.h:243:2: error: unknown type name 'uint64_t' uint64_t user_token; /usr/include/linux/rds.h:248:2: error: unknown type name 'uint64_t' uint64_t local_addr; /usr/include/linux/rds.h:249:2: error: unknown type name 'uint64_t' uint64_t remote_addr; /usr/include/linux/rds.h:252:4: error: unknown type name 'uint64_t' uint64_t compare; /usr/include/linux/rds.h:253:4: error: unknown type name 'uint64_t' uint64_t swap; /usr/include/linux/rds.h:256:4: error: unknown type name 'uint64_t' uint64_t add; /usr/include/linux/rds.h:259:4: error: unknown type name 'uint64_t' uint64_t compare; /usr/include/linux/rds.h:260:4: error: unknown type name 'uint64_t' uint64_t swap; /usr/include/linux/rds.h:261:4: error: unknown type name 'uint64_t' uint64_t compare_mask; /usr/include/linux/rds.h:262:4: error: unknown type name 'uint64_t' uint64_t swap_mask; /usr/include/linux/rds.h:265:4: error: unknown type name 'uint64_t' uint64_t add; /usr/include/linux/rds.h:266:4: error: unknown type name 'uint64_t' uint64_t nocarry_mask; /usr/include/linux/rds.h:269:2: error: unknown type name 'uint64_t' uint64_t flags; /usr/include/linux/rds.h:270:2: error: unknown type name 'uint64_t' uint64_t user_token; /usr/include/linux/rds.h:274:2: error: unknown type name 'uint64_t' uint64_t user_token; /usr/include/linux/rds.h:275:2: error: unknown type name 'int32_t' int32_t status; Signed-off-by:
-
Jeff Layton authored
[ Upstream commit c6b0b656 ] While we hold a reference to the dentry when build_dentry_path is called, we could end up racing with a rename that changes d_parent. Handle that situation correctly, by using the rcu_read_lock to ensure that the parent dentry and inode stick around long enough to safely check ceph_snap and ceph_ino. Link: http://tracker.ceph.com/issues/18148Signed-off-by:
Jeff Layton <jlayton@redhat.com> Reviewed-by:
Yan, Zheng <zyan@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Alexandre Belloni authored
[ Upstream commit e3ccc921 ] When going to suspend, the I2C registers may be lost because the power to VDDcore is cut. Restore them when resuming. Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
-
