We can replace the PF lock with devlink instance lock in subsequent
changes. To make the patches easier to comprehend and limit line
lengths - factor out the existing locking assertions.

No functional changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

It should be familiar and beneficial to expose devlink instance
lock to the drivers. This way drivers can block devlink from
calling them during critical sections without breakneck locking.

Add port helpers, port splitting callbacks will be the first
target.

Use 'devl_' prefix for "explicitly locked" API. Initial RFC used
'__devlink' but that's too much typing.

devl_lock_is_held() is not defined without lockdep, which is
the same behavior as lockdep_is_held() itself.
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Biao Huang says:

====================
MediaTek Ethernet Patches on MT8195

Changes in v13:
1. add reviewed-by in "net: dt-bindings: dwmac: add support for mt8195"
   as Rob's comments.
2. drop num_clks defined in mediatek_dwmac_plat_data struct in "stmmac:
   dwmac-mediatek: Reuse more common features" as Angelo's comments.

Changes in v12:
1. add a new patch "stmmac: dwmac-mediatek: re-arrange clock setting" to
   this series, to simplify clock handling in driver, which benefits to
   binding file mediatek-dwmac.yaml.
2. modify dt-binding description in patch "net: dt-bindings: dwmac: add
   support for mt8195" as Rob's comments in v10 series, put mac_cg to the
   end of clock list.
3. there are small changes in patch "stmmac: dwmac-mediatek: add support
   for mt8195", @AngeloGioacchino, please review it kindly.

Changes in v11:
1. add reivewed-by in "net: dt-bindings: dwmac: Convert mediatek-dwmac to
   DT schema" as Rob's comments.
2. fall back "net: dt-bindings: dwmac: add support for mt8195" to v8 version
   as mentioned in previous reply(https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20211216055328.15953-7-biao.huang@mediatek.com/):
   2.1 there is already a special clock named "rmii_internal", which need to
       be put to the end of the clock list(driver special handling),
       so we can't simply put new "mac_cg" for mt8195 to the end of the clock
       list.
   2.2 we prefer the if-then schema, which will make mt8195 clock list clearer
       with some duplicated information.
   2.3 we expect the future IC will follow mt2712 or mt8195, so we only need
       add new IC name to compatible list for future IC, and will not make the
       clock list binding files worse.

Changes in v10:
1. add detailed description in "arm64: dts: mt2712: update ethernet
   device node" to make the modifications clearer as Matthias's comments.
2. modify dt-binding description as Rob's comments, and "make dtbs_check" runs
   pass locally with "arm64: dts: mt2712: update ethernet device node"
   in this series.

Changes in v9:
1. remove oneOf for 1 entry as Rob's comments.
2. add new clocks to the end of existing clocks to simplify
   the binding as Rob's comments.

Changes in v8:
1. add acked-by in "stmmac: dwmac-mediatek: add platform level clocks
   management" patch

Changes in v7:
1. fix uninitialized warning as Jakub's comments.

Changes in v6:
1. update commit message as Jakub's comments.
2. split mt8195 eth dts patch("arm64: dts: mt8195: add ethernet device
   node") from this series, since mt8195 dtsi/dts basic patches is still
   under reviewing.
   https://patchwork.kernel.org/project/linux-mediatek/list/?series=579071
   we'll resend mt8195 eth dts patch once all the dependent patches are
   accepted.

Changes in v5:
1. remove useless inclusion in dwmac-mediatek.c as Angelo's comments.
2. add acked-by in "net-next: stmmac: dwmac-mediatek: add support for
   mt8195" patch

Changes in v4:
1. add changes in commit message in "net-next: dt-bindings: dwmac:
   Convert mediatek-dwmac to DT schema" patch.
2. remove ethernet-controller.yaml since snps,dwmac.yaml already include it.

Changes in v3:
1. Add prefix "net-next" to support new IC as Denis's suggestion.
2. Split dt-bindings to two patches, one for conversion, and the other for
   new IC.
3. add a new patch to update device node in mt2712-evb.dts to accommodate to
   changes in driver.
4. remove unnecessary wrapper as Angelo's suggestion.
5. Add acked-by in "net-next: stmmac: dwmac-mediatek: Reuse more common
   features" patch.

Changes in v2:
1. fix errors/warnings in mediatek-dwmac.yaml with upgraded dtschema tools

Changes in v1:
This series include 5 patches:
1. add platform level clocks management for dwmac-mediatek
2. resue more common features defined in stmmac_platform.c
3. add ethernet entry for mt8195
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add binding document for the ethernet on mt8195.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add Ethernet support for MediaTek SoCs from the mt8195 family.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert mediatek-dwmac to DT schema, and delete old mediatek-dwmac.txt.
And there are some changes in .yaml than .txt, others almost keep the same:
  1. compatible "const: snps,dwmac-4.20".
  2. delete "snps,reset-active-low;" in example, since driver remove this
     property long ago.
  3. add "snps,reset-delay-us = <0 10000 10000>" in example.
  4. the example is for rgmii interface, keep related properties only.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since there are some changes in ethernet driver:
update ethernet device node in dts to accommodate to it.

1. stmmac_probe_config_dt() in stmmac_platform.c will initialize specified
   parameters according to compatible string "snps,dwmac-4.20a", then,
   dwmac-mediatek.c can skip the initialization if add compatible string
   "snps,dwmac-4.20a" in eth device node.
2. commit 882007ed ("net-next: dt-binding: dwmac-mediatek: add more
   description for RMII") added rmii internal support, we should add
   corresponding clocks/clocks-names in eth device node.
3. add "snps,reset-delays-us = <0 10000 10000>;" to ensure reset delay
   can meet PHY requirement.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The rmii_internal clock is needed only when PHY
interface is RMII, and reference clock is from MAC.

Re-arrange the clock setting as following:
1. the optional "rmii_internal" is controlled by devm_clk_get(),
2. other clocks still be configured by devm_clk_bulk_get().
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch makes dwmac-mediatek reuse more features
supported by stmmac_platform.c.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch implements clks_config callback for dwmac-mediatek platform,
which could support platform level clocks management.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
100GbE Intel Wired LAN Driver Updates 2022-03-15

Jacob Keller says:

The ice_sriov.c file now houses almost all of the virtualization code in the
ice driver. This includes both Single Root specific implementation as well
as generic functionality such as the virtchnl interface.

We are planning to implement support for Scalable IOV in the ice driver in
the future. This implementation will want to use the generic functionality
in ice_sriov.c

Rather than dump the Scalable IOV code into ice_sriov.c, we will want to
implement it in a separate file, ice_siov.c

To help with this, refactor the code in ice_sriov.c and split the generic
functionality out into separate files.

Reorganize code to make the non-implementation specific bits into new files
with the following general guidelines:

* ice_vf_lib.[ch]

Basic VF structures and accessors. This is where scheme-independent
code will reside.

* ice_virtchnl.[ch]

Virtchnl message handling. This is where the bulk of the logic for
processing messages from VFs using the virtchnl messaging scheme will
reside. This is separated from ice_vf_lib.c because it is somewhat
distinct and stand alone.

* ice_sriov.[ch]

Single Root IOV implementation, including initialization and the
routines for interacting with SR-IOV based netdev operations.

* (future) ice_siov.[ch]

Scalable IOV implementation.

The end goal is to make it easier to re-use the generic parts of the
virtualization logic while keeping separate the concerns of the Single Root
implementation.

In addition to the pure code moves, this series has a reset refactor which
clean up the functionality to make it easier to reuse the reset code. A new
ops table is introduced to make the VF reset logic more generic. The Single
Root specific details are implemented in ice_sriov.c. A future series
implementing Scalable IOV support will use this ops table to allow re-use of
the reset logic which is now in ice_vf_lib.c
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Changes the handling of fdb entries to use Switchdev events,
instead of the previous "sync_bridge" and "sync_port" which
only run when adding or removing VLANs on the bridge.
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Link: https://lore.kernel.org/r/20220314160918.4rfrrfgmbsf2pxl3@wse-c0155Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The fundamental premise of VRF and l3mdev core code is binding a socket
to a device (l3mdev or netdev with an L3 domain) to indicate L3 scope.
Legacy code resets flowi_oif to the l3mdev losing any original port
device binding. Ben (among others) has demonstrated use cases where the
original port device binding is important and needs to be retained.
This patch handles that by adding a new entry to the common flow struct
that can indicate the l3mdev index for later rule and table matching
avoiding the need to reset flowi_oif.

In addition to allowing more use cases that require port device binds,
this patch brings a few datapath simplications:

1. l3mdev_fib_rule_match is only called when walking fib rules and
   always after l3mdev_update_flow. That allows an optimization to bail
   early for non-VRF type uses cases when flowi_l3mdev is not set. Also,
   only that index needs to be checked for the FIB table id.

2. l3mdev_update_flow can be called with flowi_oif set to a l3mdev
   (e.g., VRF) device. By resetting flowi_oif only for this case the
   FLOWI_FLAG_SKIP_NH_OIF flag is not longer needed and can be removed,
   removing several checks in the datapath. The flowi_iif path can be
   simplified to only be called if the it is not loopback (loopback can
   not be assigned to an L3 domain) and the l3mdev index is not already
   set.

3. Avoid another device lookup in the output path when the fib lookup
   returns a reject failure.

Note: 2 functional tests for local traffic with reject fib rules are
updated to reflect the new direct failure at FIB lookup time for ping
rather than the failure on packet path. The current code fails like this:

    HINT: Fails since address on vrf device is out of device scope
    COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1
    ping: Warning: source address might be selected on device other than: eth1
    PING 172.16.3.1 (172.16.3.1) from 172.16.3.1 eth1: 56(84) bytes of data.

    --- 172.16.3.1 ping statistics ---
    1 packets transmitted, 0 received, 100% packet loss, time 0ms

where the test now directly fails:

    HINT: Fails since address on vrf device is out of device scope
    COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1
    ping: connect: No route to host
Signed-off-by: David Ahern <dsahern@kernel.org>
Tested-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20220314204551.16369-1-dsahern@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The ice_check_vf_init function takes both a PF and a VF pointer. Every
caller looks up the PF pointer from the VF structure. Some callers only
use of the PF pointer is call this function. Move the lookup inside
ice_check_vf_init and drop the unnecessary argument.

Cleanup the callers to drop the now unnecessary local variables. In
particular, replace the local PF pointer with a HW structure pointer in
ice_vc_get_vf_res_msg which simplifies a few accesses to the HW
structure in that function.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Just as we moved the generic virtualization library logic into
ice_vf_lib.c, move the virtchnl message handling into ice_virtchnl.c
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Before we move the virtchnl message handling from ice_sriov.c into
ice_virtchnl.c, cleanup some long line warnings to avoid checkpatch.pl
complaints.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The ice_reset_vf function performs actions which must be taken only
while holding the VF configuration lock. Some flows already acquired the
lock, while other flows must acquire it just for the reset function. Add
the ICE_VF_RESET_LOCK flag to the function so that it can handle taking
and releasing the lock instead at the appropriate scope.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

In some cases of resetting a VF, the PF would like to first notify the
VF that a reset is impending. This is currently done via
ice_vc_notify_vf_reset. A wrapper to ice_reset_vf, ice_vf_reset_vf, is
used to call this function first before calling ice_reset_vf.

In fact, every single call to ice_vc_notify_vf_reset occurs just prior
to a call to ice_vc_reset_vf.

Now that ice_reset_vf has flags, replace this separate call with an
ICE_VF_RESET_NOTIFY flag. This removes an unnecessary exported function
of ice_vc_notify_vf_reset, and also makes there be a single function to
reset VFs (ice_reset_vf).
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The ice_reset_vf function takes a boolean parameter which indicates
whether or not the reset is due to a VFLR event.

This is somewhat confusing to read because readers must interpret what
"true" and "false" mean when seeing a line of code like
"ice_reset_vf(vf, false)".

We will want to add another toggle to the ice_reset_vf in a following
change. To avoid proliferating many arguments, convert this function to
take flags instead. ICE_VF_RESET_VFLR will indicate if this is a VFLR
reset. A value of 0 indicates no flags.

One could argue that "ice_reset_vf(vf, 0)" is no more readable than
"ice_reset_vf(vf, false)".. However, this type of flags interface is
somewhat common and using 0 to mean "no flags" makes sense in this
context. We could bother to add a define for "ICE_VF_RESET_PLAIN" or
something similar, but this can be confusing since its not an actual bit
flag.

This paves the way to add another flag to the function in a following
change.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The ice_reset_vf function returns a boolean value indicating whether or
not the VF reset. This is a bit confusing since it means that callers
need to know how to interpret the return value when needing to indicate
an error.

Refactor the function and call sites to report a regular error code. We
still report success (i.e. return 0) in cases where the reset is in
progress or is disabled.

Existing callers don't care because they do not check the return value.
We keep the error code anyways instead of a void return because we
expect future code which may care about or at least report the error
value.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The ice_reset_all_vfs function returns true if any VFs were reset, and
false otherwise. However, no callers check the return value.

Drop this return value and make the function void since the callers do
not care about this.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The ice_reset_all_vfs function takes a parameter to handle whether its
operating after a VFLR event or not. This is not necessary as every
caller always passes true. Simplify the interface by removing the
parameter.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Now that the reset functions do not rely on Single Root specific
behavior, move the ice_reset_vf, ice_reset_all_vfs, and
ice_vf_rebuild_host_cfg functions and their dependent helper functions
out of ice_sriov.c and into ice_vf_lib.c
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

We're about to move ice_reset_vf out of ice_sriov.c and into
ice_vf_lib.c

One of the dev_err statements has a checkpatch.pl violation due to
putting the vf->vf_id on the same line as the dev_err. Fix this style
issue first before moving the code.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The ice driver currently supports virtualization using Single Root IOV,
with code in the ice_sriov.c file. In the future, we plan to also
implement support for Scalable IOV, which uses slightly different
hardware implementations for some functionality.

To eventually allow this, we introduce a new ice_vf_ops structure which
will contain the basic operations that are different between the two IOV
implementations. This primarily includes logic for how to handle the VF
reset registers, as well as what to do before and after rebuilding the
VF's VSI.

Implement these ops structures and call the ops table instead of
directly calling the SR-IOV specific function. This will allow us to
easily add the Scalable IOV implementation in the future. Additionally,
it helps separate the generalized VF logic from SR-IOV specifics. This
change allows us to move the reset logic out of ice_sriov.c and into
ice_vf_lib.c without placing any Single Root specific details into the
generic file.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

If we fail to clear the malicious VF indication after a VF reset, the
dev_dbg message which is printed uses the local variable 'i' when it
meant to use vf->vf_id. Fix this.

Fixes: 0891c896 ("ice: warn about potentially malicious VFs")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Introduce the ice_vf_lib.c file along with the ice_vf_lib.h and
ice_vf_lib_private.h header files.

These files will house the generic VF structures and access functions.
Move struct ice_vf and its dependent definitions into this new header
file.

The ice_vf_lib.c is compiled conditionally on CONFIG_PCI_IOV. Some of
its functionality is required by all driver files. However, some of its
functionality will only be required by other files also conditionally
compiled based on CONFIG_PCI_IOV.

Declaring these functions used only in CONFIG_PCI_IOV files in
ice_vf_lib.h is verbose. This is because we must provide a fallback
implementation for each function in this header since it is included in
files which may not be compiled with CONFIG_PCI_IOV.

Instead, introduce a new ice_vf_lib_private.h header which verifies that
CONFIG_PCI_IOV is enabled. This header is intended to be directly
included in .c files which are CONFIG_PCI_IOV only. Add a #error
indication that will complain if the file ever gets included by another
C file on a kernel with CONFIG_PCI_IOV disabled. Add a comment
indicating the nature of the file and why it is useful.

This makes it so that we can easily define functions exposed from
ice_vf_lib.c into other virtualization files without needing to add
fallback implementations for every single function.

This begins the path to separate out generic code which will be reused
by other virtualization implementations from ice_sriov.h and ice_sriov.c
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Tony Nguyen says:

====================
100GbE Intel Wired LAN Driver Updates 2022-03-14

Jacob Keller says:

The ice_virtchnl_pf.c file has become a single place for a lot of
virtualization functionality. This includes most of the virtchnl message
handling, integration with kernel hooks like the .ndo operations, reset
logic, and more.

We are planning in the future to implement and support Scalable IOV in the
ice driver. To do this, much (but not all) of the code in ice_virtchnl_pf.c
will want to be reused.

Rather than dump all of the Scalable IOV implementation into
ice_virtchnl_pf.c it makes sense to house it in a separate file. But that
still leaves all of the Single Root IOV code littered among more generic
logic.

The long term goal is to re-organize the code such that generic re-usable
code is split into separate files. The ice_sriov.c file would end up
containing all of the Single Root IOV implementation specific details, while
ice_vf_lib.[ch] and ice_virtchnl.[ch] contain the generic pieces.

As a first step, notice that ice_sriov.c currently does not contain much of
the SR-IOV implementation. This is housed primarily in ice_virtchnl_pf.c

The code in ice_sriov.c is really generic and relates to the VF mailbox,
including mailbox overflow detection.

Rename ice_sriov.c to ice_vf_mbx.c, and then rename ice_virtchnl_pf.c to
ice_sriov.c

A later series will finish the refactor by splitting ice_sriov.c into
multiple files, moving the generic code into ice_vf_lib.c and ice_virtchnl.c

To prepare for that series, perform some basic cleanup and other refactors
that we've accumulated during this development cycle.

This series builds on top of the recent hash table refactor work.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  ice: use ice_is_vf_trusted helper function
  ice: log an error message when eswitch fails to configure
  ice: cleanup error logging for ice_ena_vfs
  ice: move ice_set_vf_port_vlan near other .ndo ops
  ice: refactor spoofchk control code in ice_sriov.c
  ice: rename ICE_MAX_VF_COUNT to avoid confusion
  ice: remove unused definitions from ice_sriov.h
  ice: convert vf->vc_ops to a const pointer
  ice: remove circular header dependencies on ice.h
  ice: rename ice_virtchnl_pf.c to ice_sriov.c
  ice: rename ice_sriov.c to ice_vf_mbx.c
====================

Link: https://lore.kernel.org/r/20220315011155.2166817-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

1) Revert CHECKSUM_UNNECESSARY for UDP packet from conntrack.

2) Reject unsupported families when creating tables, from Phil Sutter.

3) GRE support for the flowtable, from Toshiaki Makita.

4) Add GRE offload support for act_ct, also from Toshiaki.

5) Update mlx5 driver to support for GRE flowtable offload,
   from Toshiaki Makita.

6) Oneliner to clean up incorrect indentation in nf_conntrack_bridge,
   from Jiapeng Chong.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
  netfilter: bridge: clean up some inconsistent indenting
  net/mlx5: Support GRE conntrack offload
  act_ct: Support GRE offload
  netfilter: flowtable: Support GRE
  netfilter: nf_tables: Reject tables of unsupported family
  Revert "netfilter: conntrack: mark UDP zero checksum as CHECKSUM_UNNECESSARY"
====================

Link: https://lore.kernel.org/r/20220315091513.66544-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

IEEE_8021QAZ_MAX_TCS is defined in include/uapi/linux/dcbnl.h, which is
included by net/dcbnl.h. Then, linux/netdevice.h conditionally includes
net/dcbnl.h if CONFIG_DCB is enabled.

Therefore, when CONFIG_DCB is disabled, this indirect dependency is
broken.

There isn't a good reason to include net/dcbnl.h headers into the ocelot
switch library which exports low-level hardware API, so replace
IEEE_8021QAZ_MAX_TCS with OCELOT_NUM_TC which has the same value.

Fixes: 978777d0 ("net: dsa: felix: configure default-prio and dscp priorities")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220315131215.273450-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The WARN_ON() macro takes a condition, not a warning message.

Fixes: 0933bd04 ("net: sparx5: Add support for ptp clocks")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220314140327.GB30883@kiliSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Petr Machata says:

====================
netdevsim: Support for L3 HW stats

"L3 stats" is a suite of interface statistics aimed at reflecting traffic
taking place in a HW device, on an object corresponding to some software
netdevice. Support for this stats suite has been added recently, in commit
ca0a53dc ("Merge branch 'net-hw-counters-for-soft-devices'").

In this patch set:

- Patch #1 adds support for L3 stats to netdevsim.

  Real devices can have various conditions for when an L3 counter is
  available. To simulate this, netdevsim maintains a list of devices
  suitable for HW stats collection. Only when l3_stats is enabled on both a
  netdevice itself, and in netdevsim, will netdevsim contribute values to
  L3 stats.

  This enablement and disablement is done via debugfs:

    # echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/enable_ifindex
    # echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/disable_ifindex

  Besides this, there is a third toggle to mark a device for future failure:

    # echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/fail_next_enable

- This allows HW-independent testing of stats reporting and in-kernel APIs,
  as well as a test for enablement rollback, which is difficult to do
  otherwise. This netdevsim-specific selftest is added in patch #2.

- Patch #3 adds another driver-specific selftest, namely a test aimed at
  checking mlxsw-induced stats monitoring events.

====================

Link: https://lore.kernel.org/r/cover.1647265833.git.petrm@nvidia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Add a test that verifies that UAPI notifications are emitted, as mlxsw
installs and deinstalls HW counters for the L3 offload xstats.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Add a test that verifies basic UAPI contracts, netdevsim operation,
rollbacks after partial enablement in core, and UAPI notifications.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Add support for testing of HW stats support that was added recently, namely
the L3 stats support. L3 stats are provided for devices for which the L3
stats have been turned on, and that were enabled for netdevsim through a
debugfs toggle:

    # echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/enable_ifindex

For fully enabled netdevices, netdevsim counts 10pps of ingress traffic and
20pps of egress traffic. Similarly, L3 stats can be disabled for a given
device, and netdevsim ceases pretending there is any HW traffic going on:

    # echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/disable_ifindex

Besides this, there is a third toggle to mark a device for future failure:

    # echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/fail_next_enable

A future request to enable L3 stats on such netdevice will be bounced by
netdevsim:

    # ip -j l sh dev d | jq '.[].ifindex'
    66
    # echo 66 > /sys/kernel/debug/netdevsim/netdevsim10/hwstats/l3/enable_ifindex
    # echo 66 > /sys/kernel/debug/netdevsim/netdevsim10/hwstats/l3/fail_next_enable
    # ip stats set dev d l3_stats on
    Error: netdevsim: Stats enablement set to fail.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When building driver CONFIG_MICREL_PHY the follow error shows up:

aarch64-linux-gnu-ld: drivers/net/phy/micrel.o: in function `lan8814_ts_info':
micrel.c:(.text+0x1764): undefined reference to `ptp_clock_index'
micrel.c:(.text+0x1764): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_index'
aarch64-linux-gnu-ld: drivers/net/phy/micrel.o: in function `lan8814_probe':
micrel.c:(.text+0x4720): undefined reference to `ptp_clock_register'
micrel.c:(.text+0x4720): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_register'

Rework Kconfig for MICREL_PHY to depend on 'PTP_1588_CLOCK_OPTIONAL'.
Arnd describes in a good way why its needed to add this depends in patch
e5f31552 ("ethernet: fix PTP_1588_CLOCK dependencies").
Reported-by: kernel test robot <lkp@intel.com>
Fixes: ece19502 ("net: phy: micrel: 1588 support for LAN8814 phy")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220314110254.12498-1-anders.roxell@linaro.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The Lantech 8330-262D-E module is 2500base-X capable, but it reports the
nominal bitrate as 2500MBd instead of 3125MBd. Add a quirk for the
module.

The following in an EEPROM dump of such a SFP with the serial number
redacted:

00: 03 04 07 00 00 00 01 20 40 0c 05 01 19 00 00 00    ???...? @????...
10: 1e 0f 00 00 4c 61 6e 74 65 63 68 20 20 20 20 20    ??..Lantech
20: 20 20 20 20 00 00 00 00 38 33 33 30 2d 32 36 32        ....8330-262
30: 44 2d 45 20 20 20 20 20 56 31 2e 30 03 52 00 cb    D-E     V1.0?R.?
40: 00 1a 00 00 46 43 XX XX XX XX XX XX XX XX XX XX    .?..FCXXXXXXXXXX
50: 20 20 20 20 32 32 30 32 31 34 20 20 68 b0 01 98        220214  h???
60: 45 58 54 52 45 4d 45 4c 59 20 43 4f 4d 50 41 54    EXTREMELY COMPAT
70: 49 42 4c 45 20 20 20 20 20 20 20 20 20 20 20 20    IBLE
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220312205014.4154907-1-michael@walle.ccSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The ice_vc_cfg_promiscuous_mode_msg function directly checks
ICE_VIRTCHNL_VF_CAP_PRIVILEGE, instead of using the existing helper
function ice_is_vf_trusted. Switch this to use the helper function so
that all trusted checks are consistent. This aids in any potential
future refactor by ensuring consistent code.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

When ice_eswitch_configure fails, print an error message to make it more
obvious why VF initialization did not succeed.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The ice_ena_vfs function and some of its sub-functions like
ice_set_per_vf_res use a "if (<function>) { <print error> ; <exit> }"
flow. This flow discards specialized errors reported by the called
function.

This style is generally not preferred as it makes tracing error sources
more difficult. It also means we cannot log the actual error received
properly.

Refactor several calls in the ice_ena_vfs function that do this to catch
the error in the 'ret' variable. Report this in the messages, and then
return the more precise error value.

Doing this reveals that ice_set_per_vf_res returns -EINVAL or -EIO in
places where -ENOSPC makes more sense. Fix these calls up to return the
more appropriate value.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>