GPIO library is getting rid of of_node, fwnode should be utilized instead.
Prepare of_gpiochip_add() / of_gpiochip_remove() for fwnode.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Now that there are no more users of these APIs in the kernel we can
remove them.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

devm_fwnode_get_gpiod_from_child() is going away as the name is too
unwieldy, let's switch to using the new devm_fwnode_gpiod_get().
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

devm_fwnode_get_gpiod_from_child() is going away as the name is too
unwieldy, let's switch to using the new devm_fwnode_gpiod_get().
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Add support for HiSilicon GPIO controller in embedded platform, which
boot from devicetree.
Signed-off-by: Weilong Chen <chenweilong@huawei.com>
Acked-by: Jay Fang <f.fangjian@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Add the new compatible for HiSilicon gpio controller driver.
Signed-off-by: Weilong Chen <chenweilong@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

It's actually preferable to use Generic regmap GPIO over other
simple approaches. Add a TODO item for that.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Bindings for Freescale PCIe controller use a separate property called
"reset-gpio-active-high" to control polarity of its reset line, add it
to the list of quirks in gpiolib so that gpiod API can be used in the
driver.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Several legacy bindings use a separate property to specify polarity of
GPIOs instead of specifying it directly in the GPIO property. Factor
out this code to make it easier to add more such cases.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Make use of device_match_of_node() instead of open coding its
functionality.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Dialog semiconductors SLG7XL45106 is an 8-bit I2C GPO expander.
The output port is controlled by a data byte with register
address. Add a compatible string for the same. Also update
the driver to write and read from it.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Add struct pca9570_platform_data for adding the platform data
structure. Also modify the existing structs for pca9570 and pca9571
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

This patch adds compatible string for the SLG7XL45106,
I2C GPO expander.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

It's possible that PCI device can provide an IO port resource for
the device. regmap MMIO currently uses MMIO by default. With an
additional flag we enable support for IO port accesses.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

This driver implements a GPIO multiplexer based on latches connected to
other GPIOs. A set of data GPIOs is connected to the data input of
multiple latches. The clock input of each latch is driven by another
set of GPIOs. With two 8-bit latches 10 GPIOs can be multiplexed into
16 GPIOs. GPOs might be a better term as in fact the multiplexed pins
are output only.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
[Bartosz: fixed the strange of_device_id formatting]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

This adds a binding for a GPIO multiplexer driver based on latches
connected to other GPIOs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The ACCES PCI-IDIO-16 device is part of the ACCES IDIO-16 family, so the
idio-16 GPIO library module is selected and utilized to consolidate
code.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The ACCES 104-IDIO-16 device is part of the ACCES IDIO-16 family, so the
idio-16 GPIO library module is selected and utilized to consolidate
code.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Exposes consumer library functions to facilitate communication with
devices within the ACCES IDIO-16 family such as the 104-IDIO-16 and
the PCI-IDIO-16.

A CONFIG_GPIO_IDIO_16 Kconfig option is introduced by this patch.
Modules wanting access to these idio-16 library functions should select
this Kconfig option and import the GPIO_IDIO_16 symbol namespace.

Cc: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Currently, we use just the fixed string "FTGPIO010" as the gpiochip name
for ftgpio010 drivers. Because it's fixed, this means we cannot
distinguish multiple ftgpio010 devices present on a single system.

This change uses the dev_name() instead, which should be unique between
multiple instances.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Existing DTS that use legacy (non-standard) property name for the reset
line "gpios-reset" also specify incorrect polarity (0 which maps to
"active high"). Add a quirk to force polarity to "active low" so that
once driver is converted to gpiod API that pays attention to line
polarity it will work properly.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Bindings for Freescale Fast Ethernet Controller use a separate
property "phy-reset-active-high" to specify polarity of its phy
gpio line. To allow converting the driver to gpiod API we need
to add this quirk to gpiolib.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

There are several instances where we use a separate property to
override polarity specified in gpio property. Factor it out into
a separate function.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The driver is using non-standard "gpio-rtc-data", "gpio-rtc-sclk", and
"gpio-rtc-reset" names for properties describing its gpios. In
preparation to converting to the standard naming ("rtc-*-gpios") and
switching the driver to gpiod API add a quirk to gpiolib to keep
compatibility with existing DTSes.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The controller is using non-standard "cirrus,gpio-nreset" name for its
reset gpio property, whereas gpiod API expects "<name>-gpios".
Add a quirk so that gpiod API will still work on unmodified DTSes.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The controller is using non-standard "reset-n-io" name for its reset
gpio property, whereas gpiod API expects "<name>-gpios". Add a quirk
so that gpiod API will still work on unmodified DTSes.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Some legacy mappings used "gpio[s]-reset" instead of "reset-gpios",
add a quirk so that gpiod API will still work on unmodified DTSes.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Tighten selection of legacy gpio renaming quirks so that they only
considered on more relevant configurations.
Suggested-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

This consolidates all quirks doing simple renames (either allowing
suffix-less names or trivial renames, when index changes are not
required) into a single quirk.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The driver is using non-standard "i2s1-in-sel-gpio1" and
"i2s1-in-sel-gpio2" names to describe its gpios. In preparation to
converting to the standard naming (i2s1-in-sel-gpios) and switching the
driver to gpiod API add a quirk to gpiolib to keep compatibility with
existing DTSes.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

CONFIG_ARCH_NR_GPIO is not used anymore, remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

CONFIG_ARCH_NR_GPIO is not used anymore, remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

CONFIG_ARCH_NR_GPIO is not used anymore, remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

ARCH_NR_GPIOS have been removed, clean up the documentation.

After this patch, the only place when ARCH_NR_GPIOS remains is in
translations/zh_CN/gpio.txt and translations/zh_TW/gpio.txt.
I don't have the skills to update that, anyway those two files are
already out of sync as they are still mentionning ARCH_REQUIRE_GPIOLIB
which was removed by commit 65053e1a ("gpio: delete
ARCH_[WANTS_OPTIONAL|REQUIRE]_GPIOLIB")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Since commit 14e85c0e ("gpio: remove gpio_descs global array")
there is no limitation on the number of GPIOs that can be allocated
in the system since the allocation is fully dynamic.

ARCH_NR_GPIOS is today only used in order to provide downwards
gpiobase allocation from that value, while static allocation is
performed upwards from 0. However that has the disadvantage of
limiting the number of GPIOs that can be registered in the system.

To overcome this limitation without requiring each and every
platform to provide its 'best-guess' maximum number, rework the
allocation to allocate upwards, allowing approx 2 millions of
GPIOs.

In order to still allow static allocation for legacy drivers, define
GPIO_DYNAMIC_BASE with the value 512 as the start for dynamic
allocation. The 512 value is chosen because it is the end of
the current default range so all current static allocations are
expected to be below that value. Of course that's just a rough
estimate based on the default value, but assuming static
allocations come first, even if there are more static allocations
it should fit under the 512 value.

In the future, it is expected that all static allocations go away
and then dynamic allocation will be patched to start at 0.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

In the preparation of getting completely rid of static gpiobase
allocation in the future, emit a warning in drivers still doing so.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Since commit 14e85c0e ("gpio: remove gpio_descs global array")
there is no global limitation anymore on the number of GPIOs in
the system so don't clamp the number of GPIOs with ARCH_NR_GPIOS.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

ARCH_NR_GPIOS is used locally in aggr_parse() as the maximum number
of GPIOs to be aggregated together by the driver since
commit ec75039d ("gpio: aggregator: Use bitmap_parselist() for
parsing GPIO offsets").

Don't rely on the total possible number of GPIOs in the system but
define a local arbitrary macro for that, set to 512 which should be
large enough as it is also the default value for ARCH_NR_GPIOS.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The Connext chip has 4 gpio cells looking very similar to those of the
Nomadik, whose gpio/pinctrl driver (already featuring devicetree support)
will be used instead of the sta2x11 specific one.
Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com>
Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

All these drivers have an i2c probe function which doesn't use the
"struct i2c_device_id *id" parameter, so they can trivially be
converted to the "probe_new" style of probe with a single argument.

This is part of an ongoing transition to single-argument i2c probe
functions. Old-style probe functions involve a call to i2c_match_id:
in drivers/i2c/i2c-core-base.c,

         /*
          * When there are no more users of probe(),
          * rename probe_new to probe.
          */
         if (driver->probe_new)
                 status = driver->probe_new(client);
         else if (driver->probe)
                 status = driver->probe(client,
                                        i2c_match_id(driver->id_table, client));
         else
                 status = -EINVAL;

Drivers which don't need the second parameter can be declared using
probe_new instead, avoiding the call to i2c_match_id. Drivers which do
can still be converted to probe_new-style, calling i2c_match_id
themselves (as is done currently for of_match_id).

This change was done using the following Coccinelle script, and fixed
up for whitespace changes:

@ rule1 @
identifier fn;
identifier client, id;
@@

- static int fn(struct i2c_client *client, const struct i2c_device_id *id)
+ static int fn(struct i2c_client *client)
{
...when != id
}

@ rule2 depends on rule1 @
identifier rule1.fn;
identifier driver;
@@

struct i2c_driver driver = {
-       .probe
+       .probe_new
                =
(
                   fn
|
-                  &fn
+                  fn
)
                ,
};
Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>