- 05 Sep, 2018 39 commits
-
-
Jim Gill authored
[ Upstream commit e95153b6 ] Commands that are reset are returned with status SAM_STAT_COMMAND_TERMINATED. PVSCSI currently returns DID_OK | SAM_STAT_COMMAND_TERMINATED which fails the command. Instead, set hostbyte to DID_RESET to allow upper layers to retry. Tested by copying a large file between two pvscsi disks on same adapter while performing a bus reset at 1-second intervals. Before fix, commands sometimes fail with DID_OK. After fix, commands observed to fail with DID_RESET. Signed-off-by:
Jim Gill <jgill@vmware.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johannes Thumshirn authored
[ Upstream commit 63d0e3df ] Drop the frames in the ELS LOGO error path instead of just returning an error. This fixes the following kmemleak report: unreferenced object 0xffff880064cb1000 (size 424): comm "kworker/0:2", pid 24, jiffies 4294904293 (age 68.504s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<(____ptrval____)>] _fc_frame_alloc+0x2c/0x180 [libfc] [<(____ptrval____)>] fc_lport_enter_logo+0x106/0x360 [libfc] [<(____ptrval____)>] fc_fabric_logoff+0x8c/0xc0 [libfc] [<(____ptrval____)>] fcoe_if_destroy+0x79/0x3b0 [fcoe] [<(____ptrval____)>] fcoe_destroy_work+0xd2/0x170 [fcoe] [<(____ptrval____)>] process_one_work+0x7ff/0x1420 [<(____ptrval____)>] worker_thread+0x87/0xef0 [<(____ptrval____)>] kthread+0x2db/0x390 [<(____ptrval____)>] ret_from_fork+0x35/0x40 [<(____ptrval____)>] 0xffffffffffffffff which can be triggered by issuing echo eth0 > /sys/bus/fcoe/ctlr_destroy Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit afb41bb0 ] Current value for a target abort error is 0x010, however, this value should in fact be 0x002. As it stands, the range of error is 0..7 so it is currently never being detected. This bug has been in the driver since the early 2.6.12 days (or before). Detected by CoverityScan, CID#744290 ("Logically dead code") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit ec837d62 ] Fix type warnings in arch/arc/mm/cache.c. ../arch/arc/mm/cache.c: In function 'flush_anon_page': ../arch/arc/mm/cache.c:1062:55: warning: passing argument 2 of '__flush_dcache_page' makes integer from pointer without a cast [-Wint-conversion] __flush_dcache_page((phys_addr_t)page_address(page), page_address(page)); ^~~~~~~~~~~~~~~~~~ ../arch/arc/mm/cache.c:1013:59: note: expected 'long unsigned int' but argument is of type 'void *' void __flush_dcache_page(phys_addr_t paddr, unsigned long vaddr) ~~~~~~~~~~~~~~^~~~~ Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Cc: Elad Kanfi <eladkan@mellanox.com> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Ofer Levi <oferle@mellanox.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit 2423665e ] Fix build errors in arch/arc/'s delay.h: - add "extern unsigned long loops_per_jiffy;" - add <asm-generic/types.h> for "u64" In file included from ../drivers/infiniband/hw/cxgb3/cxio_hal.c:32: ../arch/arc/include/asm/delay.h: In function '__udelay': ../arch/arc/include/asm/delay.h:61:12: error: 'u64' undeclared (first use in this function) loops = ((u64) usecs * 4295 * HZ * loops_per_jiffy) >> 32; ^~~ In file included from ../drivers/infiniband/hw/cxgb3/cxio_hal.c:32: ../arch/arc/include/asm/delay.h: In function '__udelay': ../arch/arc/include/asm/delay.h:63:37: error: 'loops_per_jiffy' undeclared (first use in this function) loops = ((u64) usecs * 4295 * HZ * loops_per_jiffy) >> 32; ^~~~~~~~~~~~~~~ Signed-off-by:
-
Govindarajulu Varadarajan authored
[ Upstream commit ab123fe0 ] When driver gets notification for mtu change, driver does not handle it for all RQs. It handles only RQ[0]. Fix is to use enic_change_mtu() interface to change mtu for vf. Signed-off-by:
Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by:
-
Rafał Miłecki authored
[ Upstream commit d5ea019f ] This reverts commit 2a027b47 ("MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum"). Enabling ExternalSync caused a regression for BCM4718A1 (used e.g. in Netgear E3000 and ASUS RT-N16): it simply hangs during PCIe initialization. It's likely that BCM4717A1 is also affected. I didn't notice that earlier as the only BCM47XX devices with PCIe I own are: 1) BCM4706 with 2 x 14e4:4331 2) BCM4706 with 14e4:4360 and 14e4:4331 it appears that BCM4706 is unaffected. While BCM5300X-ES300-RDS.pdf seems to document that erratum and its workarounds (according to quotes provided by Tokunori) it seems not even Broadcom follows them. According to the provided info Broadcom should define CONF7_ES in their SDK's mipsinc.h and implement workaround in the si_mips_init(). Checking both didn't reveal such code. It *could* mean Broadcom also had some problems with the given workaround. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
Paul Burton <paul.burton@mips.com> Reported-by:
Michael Marley <michael@michaelmarley.com> Patchwork: https://patchwork.linux-mips.org/patch/20032/ URL: https://bugs.openwrt.org/index.php?do=details&task_id=1688 Cc: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Signed-off-by:
-
Calvin Walton authored
[ Upstream commit 5aa3d1a2 ] This fixes the reported family on modern AMD processors (e.g. Ryzen, which is family 0x17). Previously these processors all showed up as family 0xf. See the document https://support.amd.com/TechDocs/56255_OSRR.pdf section CPUID_Fn00000001_EAX for how to calculate the family from the BaseFamily and ExtFamily values. This matches the code in arch/x86/lib/cpu.c Signed-off-by:
Calvin Walton <calvin.walton@kepstin.ca> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Li Wang authored
[ Upstream commit 16e536ef ] /sys/../zswap/stored_pages keeps rising in a zswap test with "zswap.max_pool_percent=0" parameter. But it should not compress or store pages any more since there is no space in the compressed pool. Reproduce steps: 1. Boot kernel with "zswap.enabled=1" 2. Set the max_pool_percent to 0 # echo 0 > /sys/module/zswap/parameters/max_pool_percent 3. Do memory stress test to see if some pages have been compressed # stress --vm 1 --vm-bytes $mem_available"M" --timeout 60s 4. Watching the 'stored_pages' number increasing or not The root cause is: When zswap_max_pool_percent is set to 0 via kernel parameter, zswap_is_full() will always return true due to zswap_shrink(). But if the shinking is able to reclain a page successfully the code then proceeds to compressing/storing another page, so the value of stored_pages will keep changing. To solve the issue, this patch adds a zswap_is_full() check again after zswap_shrink() to make sure it's now under the max_pool_percent, and to not compress/store if we reached the limit. Link: http://lkml.kernel.org/r/20180530103936.17812-1-liwang@redhat.comSigned-off-by:
Li Wang <liwang@redhat.com> Acked-by:
Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjenning@redhat.com> Cc: Huang Ying <huang.ying.caritas@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Masami Hiramatsu authored
[ Upstream commit 82f4f3e6 ] Add a testcase for checking snapshot and tracing_on relationship. This ensures that the snapshotting doesn't affect current tracing on/off settings. Link: http://lkml.kernel.org/r/153149932412.11274.15289227592627901488.stgit@devbox Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Hiraku Toyooka <hiraku.toyooka@cybertrust.co.jp> Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-kselftest@vger.kernel.org Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Kiran Kumar Modukuri authored
[ Upstream commit c2412ac4 ] If we meet a conflicting object that is marked FSCACHE_OBJECT_IS_LIVE in the active object tree, we have been emitting a BUG after logging information about it and the new object. Instead, we should wait for the CACHEFILES_OBJECT_ACTIVE flag to be cleared on the old object (or return an error). The ACTIVE flag should be cleared after it has been removed from the active object tree. A timeout of 60s is used in the wait, so we shouldn't be able to get stuck there. Fixes: 9ae326a6 ("CacheFiles: A cache that backs onto a mounted filesystem") Signed-off-by:
Kiran Kumar Modukuri <kiran.modukuri@gmail.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Kiran Kumar Modukuri authored
[ Upstream commit 934140ab ] cachefiles_read_waiter() has the right to access a 'monitor' object by virtue of being called under the waitqueue lock for one of the pages in its purview. However, it has no ref on that monitor object or on the associated operation. What it is allowed to do is to move the monitor object to the operation's to_do list, but once it drops the work_lock, it's actually no longer permitted to access that object. However, it is trying to enqueue the retrieval operation for processing - but it can only do this via a pointer in the monitor object, something it shouldn't be doing. If it doesn't enqueue the operation, the operation may not get processed. If the order is flipped so that the enqueue is first, then it's possible for the work processor to look at the to_do list before the monitor is enqueued upon it. Fix this by getting a ref on the operation so that we can trust that it will still be there once we've added the monitor to the to_do list and dropped the work_lock. The op can then be enqueued after the lock is dropped. The bug can manifest in one of a couple of ways. The first manifestation looks like: FS-Cache: FS-Cache: Assertion failed FS-Cache: 6 == 5 is false ------------[ cut here ]------------ kernel BUG at fs/fscache/operation.c:494! RIP: 0010:fscache_put_operation+0x1e3/0x1f0 ... fscache_op_work_func+0x26/0x50 process_one_work+0x131/0x290 worker_thread+0x45/0x360 kthread+0xf8/0x130 ? create_worker+0x190/0x190 ? kthread_cancel_work_sync+0x10/0x10 ret_from_fork+0x1f/0x30 This is due to the operation being in the DEAD state (6) rather than INITIALISED, COMPLETE or CANCELLED (5) because it's already passed through fscache_put_operation(). The bug can also manifest like the following: kernel BUG at fs/fscache/operation.c:69! ... [exception RIP: fscache_enqueue_operation+246] ... #7 [ffff883fff083c10] fscache_enqueue_operation at ffffffffa0b793c6 #8 [ffff883fff083c28] cachefiles_read_waiter at ffffffffa0b15a48 #9 [ffff883fff083c48] __wake_up_common at ffffffff810af028 I'm not entirely certain as to which is line 69 in Lei's kernel, so I'm not entirely clear which assertion failed. Fixes: 9ae326a6 ("CacheFiles: A cache that backs onto a mounted filesystem") Reported-by:
Lei Xue <carmark.dlut@gmail.com> Reported-by:
Vegard Nossum <vegard.nossum@gmail.com> Reported-by:
Anthony DeRobertis <aderobertis@metrics.net> Reported-by:
NeilBrown <neilb@suse.com> Reported-by:
Daniel Axtens <dja@axtens.net> Reported-by:
-
Kiran Kumar Modukuri authored
[ Upstream commit d0eb06af ] Alter the state-check assertion in fscache_enqueue_operation() to allow cancelled operations to be given processing time so they can be cleaned up. Also fix a debugging statement that was requiring such operations to have an object assigned. Fixes: 9ae326a6 ("CacheFiles: A cache that backs onto a mounted filesystem") Reported-by:
-
Shubhrajyoti Datta authored
[ Upstream commit 03bc7cab ] If the registration fails then mdio_unregister is called. However at unbind the unregister ia attempted again resulting in the below crash [ 73.544038] kernel BUG at drivers/net/phy/mdio_bus.c:415! [ 73.549362] Internal error: Oops - BUG: 0 [#1] SMP [ 73.554127] Modules linked in: [ 73.557168] CPU: 0 PID: 2249 Comm: sh Not tainted 4.14.0 #183 [ 73.562895] Hardware name: xlnx,zynqmp (DT) [ 73.567062] task: ffffffc879e41180 task.stack: ffffff800cbe0000 [ 73.572973] PC is at mdiobus_unregister+0x84/0x88 [ 73.577656] LR is at axienet_mdio_teardown+0x18/0x30 [ 73.582601] pc : [<ffffff80085fa4cc>] lr : [<ffffff8008616858>] pstate: 20000145 [ 73.589981] sp : ffffff800cbe3c30 [ 73.593277] x29: ffffff800cbe3c30 x28: ffffffc879e41180 [ 73.598573] x27: ffffff8008a21000 x26: 0000000000000040 [ 73.603868] x25: 0000000000000124 x24: ffffffc879efe920 [ 73.609164] x23: 0000000000000060 x22: ffffffc879e02000 [ 73.614459] x21: ffffffc879e02800 x20: ffffffc87b0b8870 [ 73.619754] x19: ffffffc879e02800 x18: 000000000000025d [ 73.625050] x17: 0000007f9a719ad0 x16: ffffff8008195bd8 [ 73.630345] x15: 0000007f9a6b3d00 x14: 0000000000000010 [ 73.635640] x13: 74656e7265687465 x12: 0000000000000030 [ 73.640935] x11: 0000000000000030 x10: 0101010101010101 [ 73.646231] x9 : 241f394f42533300 x8 : ffffffc8799f6e98 [ 73.651526] x7 : ffffffc8799f6f18 x6 : ffffffc87b0ba318 [ 73.656822] x5 : ffffffc87b0ba498 x4 : 0000000000000000 [ 73.662117] x3 : 0000000000000000 x2 : 0000000000000008 [ 73.667412] x1 : 0000000000000004 x0 : ffffffc8799f4000 [ 73.672708] Process sh (pid: 2249, stack limit = 0xffffff800cbe0000) Fix the same by making the bus NULL on unregister. Signed-off-by:
Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
[ Upstream commit ae2dcb28 ] Rx hash/filter table configuration uses rss_conf_obj to configure filters in the hardware. This object is initialized only when the interface is brought up. This patch adds driver changes to configure rss params only when the device is in opened state. In port disabled case, the config will be cached in the driver structure which will be applied in the successive load path. Please consider applying it to 'net' branch. Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
-
Guenter Roeck authored
[ Upstream commit 0894da84 ] Including asm/cacheflush.h first results in the following build error when trying to build sparc32:allmodconfig, because 'struct page' has not been declared, and the function declaration ends up creating a separate (private) declaration of struct page (as a result of function arguments being in the scope of the function declaration and definition, not in global scope). The C scoping rules do not just affect variable visibility, they also affect type declaration visibility. The end result is that when the actual call site is seen in <linux/highmem.h>, the 'struct page' type in the caller is not the same 'struct page' that the function was declared with, resulting in: In file included from arch/sparc/include/asm/page.h:10:0, ... from drivers/staging/media/omap4iss/iss_video.c:15: include/linux/highmem.h: In function 'clear_user_highpage': include/linux/highmem.h:137:31: error: passing argument 1 of 'sparc_flush_page_to_ram' from incompatible pointer type Include generic includes files first to fix the problem. Fixes: fc96d58c ("[media] v4l: omap4iss: Add support for OMAP4 camera interface - Video devices") Suggested-by:
Guenter Roeck <linux@roeck-us.net> [ Added explanation of C scope rules - Linus ] Signed-off-by:
-
Alexander Sverdlin authored
[ Upstream commit cc8de9a6 ] If CLKH is set to 0 I2C clock is not generated at all, so avoid this value and stretch the clock in this case. Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Acked-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Nicholas Mc Guire authored
[ Upstream commit b5c1a23b ] of_iomap() can return NULL so that return needs to be checked and NULL treated as failure. While at it also take care of the missing of_node_put() in the error path. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Fixes: commit afa17a50 ("net/can: add driver for mscan family & mpc52xx_mscan") Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit c9ce1fa1 ] Prevent drivers from building on PPC32 if they use isa_bus_to_virt(), isa_virt_to_bus(), or isa_page_to_bus(), which are not available and thus cause build errors. ../drivers/net/ethernet/3com/3c515.c: In function 'corkscrew_open': ../drivers/net/ethernet/3com/3c515.c:824:9: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration] ../drivers/net/ethernet/amd/lance.c: In function 'lance_rx': ../drivers/net/ethernet/amd/lance.c:1203:23: error: implicit declaration of function 'isa_bus_to_virt'; did you mean 'bus_to_virt'? [-Werror=implicit-function-declaration] ../drivers/net/ethernet/amd/ni65.c: In function 'ni65_init_lance': ../drivers/net/ethernet/amd/ni65.c:585:20: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration] ../drivers/net/ethernet/cirrus/cs89x0.c: In function 'net_open': ../drivers/net/ethernet/cirrus/cs89x0.c:897:20: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 6e568307 ] Got crash report with following backtrace: BUG: unable to handle kernel paging request at ffff8801869daffe RIP: 0010:[<ffffffff816429c4>] [<ffffffff816429c4>] ip6_finish_output2+0x394/0x4c0 RSP: 0018:ffff880186c83a98 EFLAGS: 00010283 RAX: ffff8801869db00e ... [<ffffffff81644cdc>] ip6_finish_output+0x8c/0xf0 [<ffffffff81644d97>] ip6_output+0x57/0x100 [<ffffffff81643dc9>] ip6_forward+0x4b9/0x840 [<ffffffff81645566>] ip6_rcv_finish+0x66/0xc0 [<ffffffff81645db9>] ipv6_rcv+0x319/0x530 [<ffffffff815892ac>] netif_receive_skb+0x1c/0x70 [<ffffffffc0060bec>] atl1c_clean+0x1ec/0x310 [atl1c] ... The bad access is in neigh_hh_output(), at skb->data - 16 (HH_DATA_MOD). atl1c driver provided skb with no headroom, so 14 bytes (ethernet header) got pulled, but then 16 are copied. Reserve NET_SKB_PAD bytes headroom, like netdev_alloc_skb(). Compile tested only; I lack hardware. Fixes: 7b701764 ("atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring") Signed-off-by:
Florian Westphal <fw@strlen.de> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
[ Upstream commit 58874c7b ] There's a possible race where driver can read link status in mid-transition and see that virtual-link is up yet speed is 0. Since in this mid-transition we're guaranteed to see a mailbox from MFW soon, we can afford to treat this as link down. Fixes: cc875c2e ("qed: Add link support") Signed-off-by:
Ariel Elior <ariel.elior@cavium.com> Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 64119e05 ] Add a missing rcu_read_unlock in the error path Fixes: c95567c8 ("caif: added check for potential null return") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Len Brown authored
[ Upstream commit 9d83601a ] The -S (system summary) option failed to print any data on a 1-processor system. Reported-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
-
Eugeniu Rosca authored
[ Upstream commit eec24f2a ] The list [1] of commits doing endianness fixes in USB subsystem is long due to below quote from USB spec Revision 2.0 from April 27, 2000: ------------ 8.1 Byte/Bit Ordering Multiple byte fields in standard descriptors, requests, and responses are interpreted as and moved over the bus in little-endian order, i.e. LSB to MSB. ------------ This commit belongs to the same family. [1] Example of endianness fixes in USB subsystem: commit 14e1d56c ("usb: gadget: f_uac2: endianness fixes.") commit 42370b82 ("usb: gadget: f_uac1: endianness fixes.") commit 63afd5cc ("USB: chaoskey: fix Alea quirk on big-endian hosts") commit 74098c4a ("usb: gadget: acm: fix endianness in notifications") commit cdd7928d ("ACM gadget: fix endianness in notifications") commit 323ece54 ("cdc-wdm: fix endianness bug in debug statements") commit e102609f ("usb: gadget: uvc: Fix endianness mismatches") list goes on Fixes: 132fcb46 ("usb: gadget: Add Audio Class 2.0 Driver") Signed-off-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by:
Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Peter Senna Tschudin authored
[ Upstream commit a2b22ddd ] The tools/usb/ffs-test.c file defines cpu_to_le16/32 by using the C library htole16/32 function calls. However, cpu_to_le16/32 are used when initializing structures, i.e in a context where a function call is not allowed. It works fine on little endian systems because htole16/32 are defined by the C library as no-ops. But on big-endian systems, they are actually doing something, which might involve calling a function, causing build failures, such as: ffs-test.c:48:25: error: initializer element is not constant #define cpu_to_le32(x) htole32(x) ^~~~~~~ ffs-test.c:128:12: note: in expansion of macro ‘cpu_to_le32’ .magic = cpu_to_le32(FUNCTIONFS_DESCRIPTORS_MAGIC_V2), ^~~~~~~~~~~ To solve this, we code cpu_to_le16/32 in a way that allows them to be used when initializing structures. This fix was imported from meta-openembedded/android-tools/fix-big-endian-build.patch written by Thomas Petazzoni <thomas.petazzoni@free-electrons.com>. CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit a39ba90a ] Fix build errors when built for PPC64: These variables are only used on PPC32 so they don't need to be initialized for PPC64. ../drivers/usb/phy/phy-fsl-usb.c: In function 'usb_otg_start': ../drivers/usb/phy/phy-fsl-usb.c:865:3: error: '_fsl_readl' undeclared (first use in this function); did you mean 'fsl_readl'? _fsl_readl = _fsl_readl_be; ../drivers/usb/phy/phy-fsl-usb.c:865:16: error: '_fsl_readl_be' undeclared (first use in this function); did you mean 'fsl_readl'? _fsl_readl = _fsl_readl_be; ../drivers/usb/phy/phy-fsl-usb.c:866:3: error: '_fsl_writel' undeclared (first use in this function); did you mean 'fsl_writel'? _fsl_writel = _fsl_writel_be; ../drivers/usb/phy/phy-fsl-usb.c:866:17: error: '_fsl_writel_be' undeclared (first use in this function); did you mean 'fsl_writel'? _fsl_writel = _fsl_writel_be; ../drivers/usb/phy/phy-fsl-usb.c:868:16: error: '_fsl_readl_le' undeclared (first use in this function); did you mean 'fsl_readl'? _fsl_readl = _fsl_readl_le; ../drivers/usb/phy/phy-fsl-usb.c:869:17: error: '_fsl_writel_le' undeclared (first use in this function); did you mean 'fsl_writel'? _fsl_writel = _fsl_writel_le; and the sysfs "show" function return type should be ssize_t, not int: ../drivers/usb/phy/phy-fsl-usb.c:1042:49: error: initialization of 'ssize_t (*)(struct device *, struct device_attribute *, char *)' {aka 'long int (*)(struct device *, struct device_attribute *, char *)'} from incompatible pointer type 'int (*)(struct device *, struct device_attribute *, char *)' [-Werror=incompatible-pointer-types] static DEVICE_ATTR(fsl_usb2_otg_state, S_IRUGO, show_fsl_usb2_otg_state, NULL); Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit f36b507c ] The driver may sleep in an interrupt handler. The function call path (from bottom to top) in Linux-4.16.7 is: [FUNC] r8a66597_queue(GFP_KERNEL) drivers/usb/gadget/udc/r8a66597-udc.c, 1193: r8a66597_queue in get_status drivers/usb/gadget/udc/r8a66597-udc.c, 1301: get_status in setup_packet drivers/usb/gadget/udc/r8a66597-udc.c, 1381: setup_packet in irq_control_stage drivers/usb/gadget/udc/r8a66597-udc.c, 1508: irq_control_stage in r8a66597_irq (interrupt handler) To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC. This bug is found by my static analysis tool (DSAC-2) and checked by my code review. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit 0602088b ] The driver may sleep with holding a spinlock. The function call paths (from bottom to top) in Linux-4.16.7 are: [FUNC] msleep drivers/usb/gadget/udc/r8a66597-udc.c, 839: msleep in init_controller drivers/usb/gadget/udc/r8a66597-udc.c, 96: init_controller in r8a66597_usb_disconnect drivers/usb/gadget/udc/r8a66597-udc.c, 93: spin_lock in r8a66597_usb_disconnect [FUNC] msleep drivers/usb/gadget/udc/r8a66597-udc.c, 835: msleep in init_controller drivers/usb/gadget/udc/r8a66597-udc.c, 96: init_controller in r8a66597_usb_disconnect drivers/usb/gadget/udc/r8a66597-udc.c, 93: spin_lock in r8a66597_usb_disconnect To fix these bugs, msleep() is replaced with mdelay(). This bug is found by my static analysis tool (DSAC-2) and checked by my code review. Signed-off-by:
-
Lucas Stach authored
[ Upstream commit c80d673b ] If the second LVDS channel has been disabled in the DT when using dual-channel mode we should not print a warning. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Lucas Stach authored
[ Upstream commit b5826239 ] The LVDS signal integrity is only guaranteed when the correct enable sequence (first IPU DI, then LDB) is used. If the LDB display output was active before the imx-drm driver is loaded (like when a bootsplash was active) the DI will be disabled by the full IPU reset we do when loading the driver. The LDB control registers are not part of the IPU range and thus will remain unchanged. This leads to the LDB still being active when the DI is getting enabled, effectively reversing the required enable sequence. Fix this by also disabling the LDB on driver bind. Signed-off-by:
-
Varun Prakash authored
[ Upstream commit a17037e7 ] In iscsi_check_tmf_restrictions() task->hdr is dereferenced to print the opcode, it is possible that task->hdr is NULL. There are two cases based on opcode argument: 1. ISCSI_OP_SCSI_CMD - In this case alloc_pdu() is called after iscsi_check_tmf_restrictions() iscsi_prep_scsi_cmd_pdu() -> iscsi_check_tmf_restrictions() -> alloc_pdu(). Transport drivers allocate memory for iSCSI hdr in alloc_pdu() and assign it to task->hdr. In case of TMF task->hdr will be NULL resulting in NULL pointer dereference. 2. ISCSI_OP_SCSI_DATA_OUT - In this case transport driver can free the memory for iSCSI hdr after transmitting the pdu so task->hdr can be NULL or invalid. This patch fixes this issue by removing task->hdr->opcode from the printk statement. Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
-
Sean Paul authored
[ Upstream commit 5f341756 ] The bridge loses its hw state when the cable is unplugged. If we detect this case in the hpd handler, reset its state. Reported-by:
Rob Clark <robdclark@gmail.com> Tested-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180703165648.120401-1-seanpaul@chromium.orgSigned-off-by:
-
Bernd Edlinger authored
[ Upstream commit 5cf3006c ] I was looking at usually suppressed gcc warnings, [-Wimplicit-fallthrough=] in this case: The code definitely looks like a break is missing here. However I am not able to test the NL80211_IFTYPE_MESH_POINT, nor do I actually know what might be :) So please use this patch with caution and only if you are able to do some testing. Signed-off-by:
Bernd Edlinger <bernd.edlinger@hotmail.de> [johannes: looks obvious enough to apply as is, interesting though that it never seems to have been a problem] Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
mpubbise@codeaurora.org authored
[ Upstream commit 19103a4b ] As part of hw reconfig, only stations linked to AP interfaces are added back to the driver ignoring those which are tied to AP_VLAN interfaces. It is true that there could be stations tied to the AP_VLAN interface while serving 4addr clients or when using AP_VLAN for VLAN operations; we should be adding these stations back to the driver as part of hw reconfig, failing to do so can cause functional issues. In the case of ath10k driver, the following errors were observed. ath10k_pci : failed to install key for non-existent peer XX:XX:XX:XX:XX:XX Workqueue: events_freezable ieee80211_restart_work [mac80211] (unwind_backtrace) from (show_stack+0x10/0x14) (show_stack) (dump_stack+0x80/0xa0) (dump_stack) (warn_slowpath_common+0x68/0x8c) (warn_slowpath_common) (warn_slowpath_null+0x18/0x20) (warn_slowpath_null) (ieee80211_enable_keys+0x88/0x154 [mac80211]) (ieee80211_enable_keys) (ieee80211_reconfig+0xc90/0x19c8 [mac80211]) (ieee80211_reconfig]) (ieee80211_restart_work+0x8c/0xa0 [mac80211]) (ieee80211_restart_work) (process_one_work+0x284/0x488) (process_one_work) (worker_thread+0x228/0x360) (worker_thread) (kthread+0xd8/0xec) (kthread) (ret_from_fork+0x14/0x24) Also while bringing down the AP VAP, WARN_ONs and errors related to peer removal were observed. ath10k_pci : failed to clear all peer wep keys for vdev 0: -2 ath10k_pci : failed to disassociate station: 8c:fd:f0:0a:8c:f5 vdev 0: -2 (unwind_backtrace) (show_stack+0x10/0x14) (show_stack) (dump_stack+0x80/0xa0) (dump_stack) (warn_slowpath_common+0x68/0x8c) (warn_slowpath_common) (warn_slowpath_null+0x18/0x20) (warn_slowpath_null) (sta_set_sinfo+0xb98/0xc9c [mac80211]) (sta_set_sinfo [mac80211]) (__sta_info_flush+0xf0/0x134 [mac80211]) (__sta_info_flush [mac80211]) (ieee80211_stop_ap+0xe8/0x390 [mac80211]) (ieee80211_stop_ap [mac80211]) (__cfg80211_stop_ap+0xe0/0x3dc [cfg80211]) (__cfg80211_stop_ap [cfg80211]) (cfg80211_stop_ap+0x30/0x44 [cfg80211]) (cfg80211_stop_ap [cfg80211]) (genl_rcv_msg+0x274/0x30c) (genl_rcv_msg) (netlink_rcv_skb+0x58/0xac) (netlink_rcv_skb) (genl_rcv+0x20/0x34) (genl_rcv) (netlink_unicast+0x11c/0x204) (netlink_unicast) (netlink_sendmsg+0x30c/0x370) (netlink_sendmsg) (sock_sendmsg+0x70/0x84) (sock_sendmsg) (___sys_sendmsg.part.3+0x188/0x228) (___sys_sendmsg.part.3) (__sys_sendmsg+0x4c/0x70) (__sys_sendmsg) (ret_fast_syscall+0x0/0x44) These issues got fixed by adding the stations which are tied to AP_VLANs back to the driver. Signed-off-by:
Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 86126b77 ] nlmsg_multicast() always frees the skb, so in case we cannot call it we must do that ourselves. Fixes: 21ee543e ("xfrm: fix race between netns cleanup and state expire notification") Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Tommi Rantala authored
[ Upstream commit 8cc88773 ] Fix missing dst_release() when local broadcast or multicast traffic is xfrm policy blocked. For IPv4 this results to dst leak: ip_route_output_flow() allocates dst_entry via __ip_route_output_key() and passes it to xfrm_lookup_route(). xfrm_lookup returns ERR_PTR(-EPERM) that is propagated. The dst that was allocated is never released. IPv4 local broadcast testcase: ping -b 192.168.1.255 & sleep 1 ip xfrm policy add src 0.0.0.0/0 dst 192.168.1.255/32 dir out action block IPv4 multicast testcase: ping 224.0.0.1 & sleep 1 ip xfrm policy add src 0.0.0.0/0 dst 224.0.0.1/32 dir out action block For IPv6 the missing dst_release() causes trouble e.g. when used in netns: ip netns add TEST ip netns exec TEST ip link set lo up ip link add dummy0 type dummy ip link set dev dummy0 netns TEST ip netns exec TEST ip addr add fd00::1111 dev dummy0 ip netns exec TEST ip link set dummy0 up ip netns exec TEST ping -6 -c 5 ff02::1%dummy0 & sleep 1 ip netns exec TEST ip xfrm policy add src ::/0 dst ff02::1 dir out action block wait ip netns del TEST After netns deletion we see: [ 258.239097] unregister_netdevice: waiting for lo to become free. Usage count = 2 [ 268.279061] unregister_netdevice: waiting for lo to become free. Usage count = 2 [ 278.367018] unregister_netdevice: waiting for lo to become free. Usage count = 2 [ 288.375259] unregister_netdevice: waiting for lo to become free. Usage count = 2 Fixes: ac37e251 ("xfrm: release dst_orig in case of error in xfrm_lookup()") Signed-off-by:
Tommi Rantala <tommi.t.rantala@nokia.com> Signed-off-by:
-
Eyal Birger authored
[ Upstream commit d6990976 ] When setting the skb->dst before doing the MTU check, the route PMTU caching and reporting is done on the new dst which is about to be released. Instead, PMTU handling should be done using the original dst. This is aligned with IPv4 VTI. Fixes: ccd740cb ("vti6: Add pmtu handling to vti6_xmit.") Signed-off-by:
Eyal Birger <eyal.birger@gmail.com> Signed-off-by:
-
yujuan.qi authored
commit 40413955 upstream. in for(),if((optlen > 0) && (optptr[1] == 0)), enter infinite loop. Test: receive a packet which the ip length > 20 and the first byte of ip option is 0, produce this issue Signed-off-by:
yujuan.qi <yujuan.qi@mediatek.com> Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Ethan Zhao authored
commit 5ccba44b upstream. System will hang if user set sysctl_sched_time_avg to 0: [root@XXX ~]# sysctl kernel.sched_time_avg_ms=0 Stack traceback for pid 0 0xffff883f6406c600 0 0 1 3 R 0xffff883f6406cf50 *swapper/3 ffff883f7ccc3ae8 0000000000000018 ffffffff810c4dd0 0000000000000000 0000000000017800 ffff883f7ccc3d78 0000000000000003 ffff883f7ccc3bf8 ffffffff810c4fc9 ffff883f7ccc3c08 00000000810c5043 ffff883f7ccc3c08 Call Trace: <IRQ> [<ffffffff810c4dd0>] ? update_group_capacity+0x110/0x200 [<ffffffff810c4fc9>] ? update_sd_lb_stats+0x109/0x600 [<ffffffff810c5507>] ? find_busiest_group+0x47/0x530 [<ffffffff810c5b84>] ? load_balance+0x194/0x900 [<ffffffff810ad5ca>] ? update_rq_clock.part.83+0x1a/0xe0 [<ffffffff810c6d42>] ? rebalance_domains+0x152/0x290 [<ffffffff810c6f5c>] ? run_rebalance_domains+0xdc/0x1d0 [<ffffffff8108a75b>] ? __do_softirq+0xfb/0x320 [<ffffffff8108ac85>] ? irq_exit+0x125/0x130 [<ffffffff810b3a17>] ? scheduler_ipi+0x97/0x160 [<ffffffff81052709>] ? smp_reschedule_interrupt+0x29/0x30 [<ffffffff8173a1be>] ? reschedule_interrupt+0x6e/0x80 <EOI> [<ffffffff815bc83c>] ? cpuidle_enter_state+0xcc/0x230 [<ffffffff815bc80c>] ? cpuidle_enter_state+0x9c/0x230 [<ffffffff815bc9d7>] ? cpuidle_enter+0x17/0x20 [<ffffffff810cd6dc>] ? cpu_startup_entry+0x38c/0x420 [<ffffffff81053373>] ? start_secondary+0x173/0x1e0 Because divide-by-zero error happens in function: update_group_capacity() update_cpu_capacity() scale_rt_capacity() { ... total = sched_avg_period() + delta; used = div_u64(avg, total); ... } To fix this issue, check user input value of sysctl_sched_time_avg, keep it unchanged when hitting invalid input, and set the minimum limit of sysctl_sched_time_avg to 1 ms. Reported-by:
James Puthukattukaran <james.puthukattukaran@oracle.com> Signed-off-by:
Ethan Zhao <ethan.zhao@oracle.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: efault@gmx.de Cc: ethan.kernel@gmail.com Cc: keescook@chromium.org Cc: mcgrof@kernel.org Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/1504504774-18253-1-git-send-email-ethan.zhao@oracle.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Steve Muckle <smuckle@google.com> Signed-off-by:
-
- 28 Aug, 2018 1 commit
-
-
Greg Kroah-Hartman authored
-
