- 23 Sep, 2017 40 commits
-
-
Nicolas Iooss authored
Files input_formatter_subsystem_defs.h begin with: #ifndef _if_subsystem_defs_h #define _if_subsystem_defs_h__ and end with: #endif /* _if_subsystem_defs_h__ */ The intent seems to have been to use _if_subsystem_defs_h__ everywhere but two underscores are missing in the initial #ifndef. Fixes: a49d2536 ("staging/atomisp: Add support for the Intel IPU v2") Signed-off-by:Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Andy Shevchenko authored
In many files in the driver the intel-mid.h header inclusion is redundant. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Andy Shevchenko authored
Since we switched to upstream IOSF MBI API the custom code become not in use anymore. Signed-off-by:
-
Andy Shevchenko authored
There is a common for x86 IOSF MBI API. Move atomisp code to use it. Signed-off-by:
-
Andy Shevchenko authored
intel_mid_msgbus_*_raw*() are not used anywhere. Signed-off-by:
-
Andy Shevchenko authored
intel_mid_soc_stepping() is not used anywhere. Signed-off-by:
-
Andy Shevchenko authored
The d3_delay parameter is set by arch/x86/pci/intel_mid_pci.c and drivers/pci/quirks.c. No need to override that settings in unrelated driver. Signed-off-by:
-
Andy Shevchenko authored
Remove dead code. If someone needs it the P-Unit semaphore is handled by I2C DesignWare driver (drivers/i2c/busses/i2c-designware-baytrail.c). Signed-off-by:
-
Sakari Ailus authored
Use tabs in Kconfig for indentation rather than spaces. The patch has been created using the following command: find drivers/staging/media/atomisp/ -name Kconfig| \ xargs perl -i -pe 's/ {8}/\t/g' Signed-off-by: -
Hans Verkuil authored
The help text should be indented by at least two spaces after the 'help' separator. This is both good practice and the media_build system for building media drivers makes this assumption. Fix this for the atomisp/i2c/Kconfig and fix the atomisp/pci/Kconfig that didn't align the help separator with the preceding keywords. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Arvind Yadav authored
driver_attribute are not supposed to change at runtime. Functions driver_create_file/driver_remove_file are working with const driver_attribute. So mark the non-const structs as const. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Himanshu Jha authored
Kfree on NULL pointer is a no-op and therefore checking is redundant. Signed-off-by:
Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by:
-
Hans Verkuil authored
Make sure these values are set to avoid 'uninitialized variable' warnings. Hasn't happened yet, but better safe than sorry. Signed-off-by:
-
Hans Verkuil authored
The help text should be indented by at least two spaces after the 'help' separator. This is both good practice and the media_build system for building media drivers makes this assumption. I went through all Kconfigs under drivers/media and fixed any bad help sections. This makes it conform to the common practice and should fix problems with 'make menuconfig' when using media_build. This is due to a "WARNING" message that media_build can insert in the Kconfig and that assumes the help text is indented by at least two spaces. If not, then the Kconfig becomes invalid and 'make menuconfig' fails. Signed-off-by:
Thomas Kaiser <linux-dvb@kaiser-linux.li> Signed-off-by:
-
Hans Verkuil authored
In the distant past the adv7604 driver used private controls. In order to access them the v4l-subdevX nodes were needed. Later the is_private tag was removed in the adv7604 driver and the need for v4l-subdevX device nodes disappeared. Remove the creation of those device nodes from this driver. Note: the cobalt card is only used inside Cisco and we never actually used the v4l-subdevX nodes for anything. So this API change can be done safely without breaking anything. Signed-off-by:
-
Ricardo Ribalda authored
max_width and max_height are swap with step_width and step_height. Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
-
Markus Elfring authored
- Delete an error message for a failed memory allocation in init_vpbe_layer(); - Replace the specification of data structures by pointer dereferences as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention; - media: DaVinci-VPBE-Display: Improve a size determination in two functions - Adjust 12 checks for null pointers Those issues were pointed by checkpatch.pl and Coccinelle. [mchehab@s-opensource.com: fold three cleanup patches into one] Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Markus Elfring authored
The script "checkpatch.pl" pointed information out like the following. ERROR: do not use assignment in if condition Thus fix the affected source code place. Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
-
Markus Elfring authored
The script "checkpatch.pl" pointed information out like the following. ERROR: do not use assignment in if condition Thus fix the affected source code places. Signed-off-by:
-
Colin Ian King authored
Don't populate the array buf on the stack, instead make it static. Makes the object code smaller by over 240 bytes: Before: text data bss dec hex filename 21689 22992 416 45097 b029 cx23885-cards.o After: text data bss dec hex filename 21348 23088 416 44852 af34 cx23885-cards.o Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the arrays res_x and resy_y on the stack, instead make them static const. Makes the object code smaller by over 160 bytes: Before: text data bss dec hex filename 10509 2800 64 13373 343d ov9640.o After: text data bss dec hex filename 10184 2960 64 13208 3398 ov9640.o Signed-off-by:
-
Colin Ian King authored
The error handling paths all end up with retval being non-zero, so the check for retval being zero is always false and hence is redundant. Remove it. Detected by CoverityScan CID#1309479 ("Logically dead code") Signed-off-by: -
Colin Ian King authored
Don't populate the array syds on the stack, instead make it static const. Makes the object code smaller by over 280 bytes: Before: text data bss dec hex filename 81451 12784 704 94939 172db cx25840-core.o text data bss dec hex filename 81070 12880 704 94654 171be cx25840-core.o Signed-off-by:
-
Thomas Meyer authored
Use ARRAY_SIZE macro, rather than explicitly coding some variant of it yourself. Found with: find -type f -name "*.c" -o -name "*.h" | xargs perl -p -i -e 's/\bsizeof\s*\(\s*(\w+)\s*\)\s*\ /\s*sizeof\s*\(\s*\1\s*\[\s*0\s*\]\s*\) /ARRAY_SIZE(\1)/g' and manual check/verification. Signed-off-by:
Thomas Meyer <thomas@m3y3r.de> Signed-off-by:
-
Daniel Scheller authored
Fixes one sparse warning: mxl5xx.c:46:1: warning: symbol 'mxllist' was not declared. Should it be static? Signed-off-by:
Daniel Scheller <d.scheller@gmx.net> Signed-off-by:
-
Colin Ian King authored
Don't populate the array rc_nec_tab on the stack, instead make it static const. Makes the object code smaller by over 620 bytes: Before: text data bss dec hex filename 49511 17040 64 66615 10437 rtl28xxu.o After: text data bss dec hex filename 48825 17104 64 65993 101c9 rtl28xxu.o Signed-off-by:
-
Bhumika Goyal authored
Make these const as they are only used in a copy operation. Done using Coccinelle. Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Bhumika Goyal authored
Make these const as they are only used in a copy operation. Done using Coccinelle. @match disable optional_qualifier@ identifier s; @@ static struct i2c_client s = {...}; @ref@ position p; identifier match.s; @@ s@p @good1@ position ref.p; identifier match.s,f,c; expression e; @@ ( e = s@p | e = s@p.f | c(...,s@p.f,...) | c(...,s@p,...) ) @bad depends on !good1@ position ref.p; identifier match.s; @@ s@p @depends on forall !bad disable optional_qualifier@ identifier match.s; @@ static + const struct i2c_client s; Signed-off-by: -
Markus Elfring authored
* Return directly after a call of the function "kzalloc" failed at the beginning. * Move a bit of exception handling code into an if branch. * Delete jump targets which became unnecessary with this refactoring. Signed-off-by:
-
Markus Elfring authored
The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written !… Thus fix the affected source code places. Signed-off-by:
-
Markus Elfring authored
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. This issue was detected by using the Coccinelle software. [mchehab@s-opensoure.com: merge similar patches into one] Signed-off-by:
-
Markus Elfring authored
The variables will be set to an appropriate value before usage. Thus omit the explicit initialisation at the beginning. [mchehab@s-opensource.com: fold similar patches into one] Signed-off-by:
-
Markus Elfring authored
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. [mchehab@s-opensource.com: fold several similar patches into one] Signed-off-by:
-
Hans Verkuil authored
Add CEC support for the tc358743 HDMI-CSI bridge. Signed-off-by:
-
Hans Verkuil authored
Add the missing CEC register defines. Signed-off-by:
-
Hans Verkuil authored
Add an entry for the CEC GPIO driver. Signed-off-by:
-
Hans Verkuil authored
Add a simple HDMI CEC GPIO driver that sits on top of the cec-pin framework. While I have heard of SoCs that use the GPIO pin for CEC (apparently an early RockChip SoC used that), the main use-case of this driver is to function as a debugging tool. By connecting the CEC line to a GPIO pin on a Raspberry Pi 3 for example it turns it into a CEC debugger and protocol analyzer. With 'cec-ctl --monitor-pin' the CEC traffic can be analyzed. But of course it can also be used with any hardware project where the HDMI CEC line is hooked up to a pull-up gpio line. In addition this has (optional) support for tracing HPD changes if the HPD is connected to a GPIO. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Hans Verkuil authored
Document the bindings for the cec-gpio module for hardware where the CEC line and optionally the HPD line are connected to GPIO lines. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Hans Verkuil authored
Document these new CEC events. Signed-off-by:
-
Hans Verkuil authored
Add support for two new low-level events: PIN_HPD_LOW and PIN_HPD_HIGH. This is specifically meant for use with the upcoming cec-gpio driver and makes it possible to trace when the HPD pin changes. Some HDMI sinks do strange things with the HPD and this makes it easy to debug this. Note that this also moves the initialization of a devnode mutex and list to the allocate_adapter function: if the HPD is high, then as soon as the HPD interrupt is created an interrupt occurs and cec_queue_pin_hpd_event() is called which requires that the devnode mutex and list are initialized. Signed-off-by:
-
