- 14 Dec, 2023 2 commits
-
-
Joshua Ashton authored
Unlike degamma, blend gamma doesn't support hardcoded curve (predefined/ROM), but we can use AMD color module to fill blend gamma parameters when we have non-linear plane gamma TF without plane gamma LUT. The regular degamma path doesn't hit this. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Joshua Ashton <joshua@froggi.es> Signed-off-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Melissa Wen authored
Wire up DC 3D LUT to DM plane color management (pre-blending). On AMD display HW, 3D LUT comes after a shaper curve and we always have to program a shaper curve to delinearize or normalize the color space before applying a 3D LUT (since we have a reduced number of LUT entries). In this version, the default values of 3D LUT for size and bit_depth are 17x17x17 and 12-bit, but we already provide here a more generic mechanisms to program other supported values (9x9x9 size and 10-bit). v2: - started with plane 3D LUT instead of CRTC 3D LUT support v4: - lut3d_size is the max dimension size instead of # of entries Reviewed-by:
-
- 13 Dec, 2023 38 commits
-
-
Christian König authored
This can only happen when there is a reference counting bug. v2: fix typo Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
-
Woody Suwalski authored
Fix to avoid multiple debug error lines printed on every suspend by Radeon driver's debugfs. radeon_debugfs_init() calls debugfs_create_file() for every ring. This results in printing multiple error lines to the screen and dmesg similar to this: [ 92.378726] debugfs: File 'radeon_ring_gfx' in directory '0000:00:01.0' already present! [ 92.378732] debugfs: File 'radeon_ring_cp1' in directory '0000:00:01.0' already present! [ 92.378734] debugfs: File 'radeon_ring_cp2' in directory '0000:00:01.0' already present! [ 92.378737] debugfs: File 'radeon_ring_dma1' in directory '0000:00:01.0' already present! [ 92.378739] debugfs: File 'radeon_ring_dma2' in directory '0000:00:01.0' already present! [ 92.380775] debugfs: File 'radeon_ring_uvd' in directory '0000:00:01.0' already present! [ 92.406620] debugfs: File 'radeon_ring_vce1' in directory '0000:00:01.0' already present! [ 92.406624] debugfs: File 'radeon_ring_vce2' in directory '0000:00:01.0' already present! Patch v1: The fix was to run lookup() for the file before trying to (re)create that debug file. Patch v2: Call the radeon_debugfs_init() only once when radeon ring is initialized (as suggested by Christian K. - thanks) Reviewed-by:
Woody Suwalski <terraluna977@gmail.com> Signed-off-by:
-
Melissa Wen authored
Enable usage of predefined transfer func in addition to shaper 1D LUT. That means we can save some complexity by just setting a predefined curve, instead of programming a custom curve when preparing color space for applying 3D LUT. Reviewed-by:
-
Melissa Wen authored
Map DC shaper LUT to DM plane color management. Shaper LUT can be used to delinearize and/or normalize the color space for computational efficiency and achiving specific visual styles. If a plane degamma is apply to linearize the color space, a custom shaper 1D LUT can be used just before applying 3D LUT. v2: - use DPP color caps to verify plane 3D LUT support - add debug message if shaper LUT programming fails v4: - remove helper to check 3D LUT color caps (Harry) - update desc of lut3d-setup helper from MPC to DPP v5: - remove color_mgmt_changed check that prevents color updates (Joshua) Reviewed-by:
-
Joshua Ashton authored
With `dc_fixpt_from_s3132()` translation, we can just use it to set hdr_mult. Reviewed-by:
-
Joshua Ashton authored
Detach value translation from CTM to reuse it for programming HDR multiplier property. Reviewed-by:
-
Melissa Wen authored
DC only has pre-blending degamma caps (plane/DPP) that is currently in use for CRTC/post-blending degamma, so that we don't have HW caps to perform plane and CRTC degamma at the same time. Reject atomic updates when serspace sets both plane and CRTC degamma properties. Reviewed-by:
-
Joshua Ashton authored
Set DC plane with user degamma LUT or predefined TF from driver-specific plane color properties. If plane and CRTC degamma are set in the same time, plane degamma has priority. That means, we only set CRTC degamma if we don't have plane degamma LUT or TF to configure. We return -EINVAL if we don't have plane degamma settings, so we can continue and check CRTC degamma. Reviewed-by:
-
Christian König authored
When freeing PD/PT with shadows it can happen that the shadow destruction races with detaching the PD/PT from the VM causing a NULL pointer dereference in the invalidation code. Fix this by detaching the the PD/PT from the VM first and then freeing the shadow instead. Signed-off-by:
-
Melissa Wen authored
The next patch adds pre-blending degamma to AMD color mgmt pipeline, but pre-blending degamma caps (DPP) is currently in use to provide DRM CRTC atomic degamma or implict degamma on legacy gamma. Detach degamma usage regarging CRTC color properties to manage plane and CRTC color correction combinations. Reviewed-by:
-
Joshua Ashton authored
We should reset a plane state if at least one of the color management properties differs from old and new state. Reviewed-by:
-
Joshua Ashton authored
Otherwise this is just initialized to 0. This needs to actually have a value so that compute_curve can work for PQ EOTF. Reviewed-by:
-
Jani Nikula authored
Including drm_edid.h from amdgpu_mode.h causes the rebuild of literally hundreds of files when drm_edid.h is modified, while there are only a handful of files that actually need to include drm_edid.h. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Joshua Ashton authored
Add predefined transfer function programming. There is no post-blending out gamma ROM for hardcoded curves, but we can use AMD color modules to program LUT parameters from pre-defined coefficients and an empty regamma LUT (or bump up LUT parameters with pre-defined TF values). v2: - update crtc color mgmt if regamma TF differs between states (Joshua) - map inverse EOTF to DC transfer function (Melissa) v3: - update AMDGPU TF list v4: - update comment regarding regamma behavior Reviewed-by:
-
Melissa Wen authored
We will wire up MPC 3D LUT to DM CRTC color pipeline in the next patch, but so far, only for atomic interface. By checking set_output_transfer_func in DC drivers with MPC 3D LUT support, we can verify that regamma is only programmed when 3D LUT programming fails. As a groundwork to introduce 3D LUT programming and better understand each step, detach atomic regamma programming from the crtc colocr updating code. Reviewed-by:
-
Melissa Wen authored
Describe some expected behavior of the AMD DM color mgmt programming. Reviewed-by:
-
Melissa Wen authored
Add AMD pre-defined transfer function property to default DRM CRTC gamma to convert to wire encoding with or without a user gamma LUT. There is no post-blending regamma ROM for pre-defined TF. When setting Gamma TF (!= Identity) and LUT at the same time, the color module will combine the pre-defined TF and the custom LUT values into the LUT that's actually programmed. v2: - enable CRTC prop in the end of driver-specific prop sequence - define inverse EOTFs as supported regamma TFs - reword driver-specific function doc to remove shaper/3D LUT v3: - spell out TF+LUT behavior in the commit and comments (Harry) Reviewed-by:
-
Joshua Ashton authored
Blend 1D LUT or a pre-defined transfer function (TF) can be set to linearize content before blending, so that it's positioned just before blending planes in the AMD color mgmt pipeline, and after 3D LUT (non-linear space). Shaper and Blend LUTs are 1D LUTs that sandwich 3D LUT. Drivers should advertize blend properties according to HW caps. There is no blend ROM for pre-defined TF. When setting blend TF (!= Identity) and LUT at the same time, the color module will combine the pre-defined TF and the custom LUT values into the LUT that's actually programmed. v3: - spell out TF+LUT behavior in the commit and comments (Harry) v5: - get blend blob correctly Reviewed-by:
-
Melissa Wen authored
On AMD HW, 3D LUT always assumes a preceding shaper 1D LUT used for delinearizing and/or normalizing the color space before applying a 3D LUT. Add pre-defined transfer function to enable delinearizing content with or without shaper LUT, where AMD color module calculates the resulted shaper curve. We apply an inverse EOTF to go from linear values to encoded values. If we are already in a non-linear space and/or don't need to normalize values, we can bypass shaper LUT with a linear transfer function that is also the default TF value. There is no shaper ROM. When setting shaper TF (!= Identity) and LUT at the same time, the color module will combine the pre-defined TF and the custom LUT values into the LUT that's actually programmed. v2: - squash commits for shaper LUT and shaper TF - define inverse EOTF as supported shaper TFs v3: - spell out TF+LUT behavior in the commit and comments (Harry) - replace BT709 EOTF by inv OETF v5: - get shaper blob correctly (Joshua) Reviewed-by:
-
Jonathan Kim authored
MES provides the driver a call to explicitly flush stale process memory within the MES to avoid a race condition that results in a fatal memory violation. When SET_SHADER_DEBUGGER is called, the driver passes a memory address that represents a process context address MES uses to keep track of future per-process calls. Normally, MES will purge its process context list when the last queue has been removed. The driver, however, can call SET_SHADER_DEBUGGER regardless of whether a queue has been added or not. If SET_SHADER_DEBUGGER has been called with no queues as the last call prior to process termination, the passed process context address will still reside within MES. On a new process call to SET_SHADER_DEBUGGER, the driver may end up passing an identical process context address value (based on per-process gpu memory address) to MES but is now pointing to a new allocated buffer object during KFD process creation. Since the MES is unaware of this, access of the passed address points to the stale object within MES and triggers a fatal memory violation. The solution is for KFD to explicitly flush the process context address from MES on process termination. Note that the flush call and the MES debugger calls use the same MES interface but are separated as KFD calls to avoid conflicting with each other. Signed-off-by:
Jonathan Kim <jonathan.kim@amd.com> Tested-by:
Alice Wong <shiwei.wong@amd.com> Reviewed-by:
Eric Huang <jinhuieric.huang@amd.com> Signed-off-by:
-
Mario Limonciello authored
commit 751e293f ("drm/amd: Move microcode init from sw_init to early_init for SDMA v2.4") made a fateful mistake in `adev->sdma.num_instances` wasn't declared when sdma_v2_4_init_microcode() was run. This caused probing to fail. Move the declaration to right before sdma_v2_4_init_microcode(). Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3043 Fixes: 751e293f ("drm/amd: Move microcode init from sw_init to early_init for SDMA v2.4") Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
-
Hawking Zhang authored
Instead of software managed counters. Signed-off-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
Yang Wang <kevinyang.wang@amd.com> Reviewed-by:
Stanley.Yang <Stanley.Yang@amd.com> Signed-off-by:
-
Melissa Wen authored
Add 3D LUT property for plane color transformations using a 3D lookup table. 3D LUT allows for highly accurate and complex color transformations and is suitable to adjust the balance between color channels. It's also more complex to manage and require more computational resources. Since a 3D LUT has a limited number of entries in each dimension we want to use them in an optimal fashion. This means using the 3D LUT in a colorspace that is optimized for human vision, such as sRGB, PQ, or another non-linear space. Therefore, userpace may need one 1D LUT (shaper) before it to delinearize content and another 1D LUT after 3D LUT (blend) to linearize content again for blending. The next patches add these 1D LUTs to the plane color mgmt pipeline. v3: - improve commit message about 3D LUT - describe the 3D LUT entries and size (Harry) v4: - advertise 3D LUT max size as the size of a single-dimension v5: - get lut3d blob correctly (Joshua) - fix doc about 3d-lut dimension size (Sebastian) Signed-off-by:
-
Jani Nikula authored
Including drm_edid.h from radeon_mode.h causes the rebuild of more than a hundred files when drm_edid.h is modified, while there are only a handful of files that actually need to include drm_edid.h. Signed-off-by:
-
Friedrich Vock authored
This improves latency if the GPU is already busy with other work. This is useful for VR compositors that submit highly latency-sensitive compositing work on high-priority compute queues while the GPU is busy rendering the next frame. Userspace merge request: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26462 v2: bump driver version (Alex) Reviewed-by:
Marek Olšák <marek.olsak@amd.com> Signed-off-by:
Friedrich Vock <friedrich.vock@gmx.de> Signed-off-by:
-
Alex Deucher authored
Add begin/end_use ring callbacks to disallow GFXOFF when SDMA work is submitted and allow it again afterward. This should avoid corner cases where GFXOFF is erroneously entered when SDMA is still active. For now just allow/disallow GFXOFF in the begin and end helpers until we root cause the issue. This should not impact power as SDMA usage is pretty minimal and GFXOSS should not be active when SDMA is active anyway, this just makes it explicit. v2: move everything into sdma5.2 code. No reason for this to be generic at this point. v3: Add comments in new code Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2220 Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> (v1) Tested-by: Mario Limonciello <mario.limonciello@amd.com> (v1) Reviewed-by:
-
Evan Quan authored
Fulfill the SMU13.0.7 support for Wifi RFI mitigation feature. -- v10->v11: - downgrade the prompt level on message failure(Lijo) v13: - Fix the format issue (IIpo Jarvinen) - Remove duplicate code (IIpo Jarvinen) Signed-off-by:
Evan Quan <quanliangl@hotmail.com> Reviewed-by:
Ma Jun <Jun.Ma2@amd.com> Signed-off-by:
-
Ma Jun authored
Fulfill the SMU13.0.0 support for Wifi RFI mitigation feature. -- v10->v11: - downgrade the prompt level on message failure(Lijo) v13: - Fix the format issue (IIpo Jarvinen) - Move function smu_v13_0_0_set_wbrf_exclusion_ranges to smu_v13_0.c as a generic code for later use (IIpo Jarvinen) Co-developed-by:
-
Evan Quan authored
To protect PMFW from being overloaded. Signed-off-by:
-
Evan Quan authored
With WBRF feature supported, as a driver responding to the frequencies, amdgpu driver is able to do shadow pstate switching to mitigate possible interference(between its (G-)DDR memory clocks and local radio module frequency bands used by Wifi 6/6e/7). -- v1->v2: - update the prompt for feature support(Lijo) v8->v9: - update parameter document for smu_wbrf_event_handler(Simon) v9->v10: v10->v11: - correct the logics for wbrf range sorting(Lijo) v13: - Fix the format issue (IIpo Jarvinen) Signed-off-by:
-
Evan Quan authored
Add those data structures to support Wifi RFI mitigation feature. Signed-off-by:
-
Alex Deucher authored
Immutable branch between pdx86 amd wbrf branch and wifi / amdgpu due for the v6.8 merge window platform-drivers-x86-amd-wbrf-v6.8-1: v6.7-rc1 + AMD WBRF support for merging into the wifi subsys and amdgpu driver for 6.8. Signed-off-by: -
Felix Kuehling authored
Use drm_gem_prime_fd_to_handle to import DMABufs for interop. This ensures that a GEM handle is created on import and that obj->dma_buf will be set and remain set as long as the object is imported into KFD. Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
Ramesh Errabolu <Ramesh.Errabolu@amd.com> Reviewed-by:
Xiaogang.Chen <Xiaogang.Chen@amd.com> Acked-by:
-
Felix Kuehling authored
Create GEM handles for exporting DMABufs using GEM-Prime APIs. The GEM handles are created in a drm_client_dev context to avoid exposing them in user mode contexts through a DMABuf import. Signed-off-by:
-
Vignesh Chander authored
1. Use the mirrored topology info to fill links for VF. The new solution is required to simplify and optimize host driver logic. Only use the new solution for VFs that support full duplex and extended_peer_link_info otherwise the info would be incomplete. 2. avoid calling extended_link_info on VF as its not supported Signed-off-by:
Vignesh Chander <Vignesh.Chander@amd.com> Reviewed-by:
Zhigang Luo <zhigang.luo@amd.com> Reviewed-by:
-
Harshit Mogalapalli authored
'wb_info' needs to be freed on error paths or it would leak the memory. Smatch pointed this out. Fixes: c81e13b9 ("drm/amd/display: Hande writeback request from userspace") Signed-off-by:
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by:
Alex Hung <alex.hung@amd.com> Signed-off-by:
-
Joshua Ashton authored
Multiplier to 'gain' the plane. When PQ is decoded using the fixed func transfer function to the internal FP16 fb, 1.0 -> 80 nits (on AMD at least) When sRGB is decoded, 1.0 -> 1.0. Therefore, 1.0 multiplier = 80 nits for SDR content. So if you want, 203 nits for SDR content, pass in (203.0 / 80.0). v4: - comment about the PQ TF need for L-to-NL (from Harry's review) Reviewed-by:
-
Melissa Wen authored
Brief documentation about pre-defined transfer function usage on AMD display driver and standardized EOTFs and inverse EOTFs. v3: - Document BT709 OETF (Pekka) - Fix description of sRGB and pure power funcs (Pekka) v4: - Add description of linear and non-linear forms (Harry) Reviewed-by:
-
