- 10 Jun, 2022 12 commits
-
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Not a huge amount here, mainly a bunch of scattered amdgpu fixes, and then some misc panfrost, bridge/panel ones, and one ast fix for multi-monitors. Probably pick up a bit more next week like rc3 often does. amdgpu: - DCN 3.1 golden settings fix - eDP fixes - DMCUB fixes - GFX11 fixes and cleanups - VCN fix for yellow carp - GMC11 fixes - RAS fixes - GPUVM TLB flush fixes - SMU13 fixes - VCN3 AV1 regression fix - VCN2 JPEG fix - Other misc fixes amdkfd: - MMU notifier fix - Support for more GC 10.3.x families - Pinned BO handling fix - Partial migration bug fix panfrost: - fix a use after free ti-sn65dsi83: - fix invalid DT configuration panel: - two self refresh fixes ast: - multiple output fix" * tag 'drm-fixes-2022-06-10' of git://anongit.freedesktop.org/drm/drm: (37 commits) drm/ast: Support multiple outputs drm/amdgpu/mes: only invalid/prime icache when finish loading both pipe MES FWs. drm/amdgpu/jpeg2: Add jpeg vmid update under IB submit drm/amdgpu: always flush the TLB on gfx8 drm/amdgpu: fix limiting AV1 to the first instance on VCN3 drm/amdkfd:Fix fw version for 10.3.6 drm/amdgpu: Add MODE register to wave debug info in gfx11 Revert "drm/amd/display: Pass the new context into disable OTG WA" Revert "drm/amdgpu: Ensure the DMA engine is deactivated during set ups" drm/atomic: Force bridge self-refresh-exit on CRTC switch drm/bridge: analogix_dp: Support PSR-exit to disable transition drm/amdgpu: suppress the compile warning about 64 bit type drm/amd/pm: suppress compile warnings about possible unaligned accesses drm/amdkfd: Fix partial migration bugs drm/amdkfd: add pinned BOs to kfd_bo_list drm/amdgpu: Update PDEs flush TLB if PTB/PDB moved drm/amdgpu: enable tmz by default for GC 10.3.7 drm/amdkfd: Add GC 10.3.6 and 10.3.7 KFD definitions drm/amdkfd: Use mmget_not_zero in MMU notifier drm/amdgpu: Resolve RAS GFX error count issue after cold boot on Arcturus ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Quick follow up, to cleanly fast-forward net again. Current release - new code bugs: - Revert "net/mlx5e: Allow relaxed ordering over VFs" Previous releases - regressions: - seg6: fix seg6_lookup_any_nexthop() to handle VRFs using flowi_l3mdev Misc: - rename TLS_INFO_ZC_SENDFILE to better express the meaning" * tag 'net-5.19-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: net: seg6: fix seg6_lookup_any_nexthop() to handle VRFs using flowi_l3mdev nfp: flower: restructure flow-key for gre+vlan combination nfp: avoid unnecessary check warnings in nfp_app_get_vf_config tls: Rename TLS_INFO_ZC_SENDFILE to TLS_INFO_ZC_TX net/mlx5: fs, fail conflicting actions net/mlx5: Rearm the FW tracer after each tracer event net/mlx5: E-Switch, pair only capable devices net/mlx5e: CT: Fix cleanup of CT before cleanup of TC ct rules Revert "net/mlx5e: Allow relaxed ordering over VFs" MAINTAINERS: adjust MELLANOX ETHERNET INNOVA DRIVERS to TLS support removal
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen updates from Juergen Gross: - a small cleanup removing "export" of an __init function - a small series adding a new infrastructure for platform flags - a series adding generic virtio support for Xen guests (frontend side) * tag 'for-linus-5.19a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: unexport __init-annotated xen_xlate_map_ballooned_pages() arm/xen: Assign xen-grant DMA ops for xen-grant DMA devices xen/grant-dma-ops: Retrieve the ID of backend's domain for DT devices xen/grant-dma-iommu: Introduce stub IOMMU driver dt-bindings: Add xen,grant-dma IOMMU description for xen-grant DMA ops xen/virtio: Enable restricted memory access using Xen grant mappings xen/grant-dma-ops: Add option to restrict memory access under Xen xen/grants: support allocating consecutive grants arm/xen: Introduce xen_setup_dma_ops() virtio: replace arch_has_restricted_virtio_memory_access() kernel: add platform_has() infrastructure
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fix from Thomas Bogendoerfer: "Build fix for Loongson-3" * tag 'mips-fixes_5.19_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Loongson-3: fix compile mips cpu_hwmon as module build error.
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2022-06-08 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2022-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: fs, fail conflicting actions net/mlx5: Rearm the FW tracer after each tracer event net/mlx5: E-Switch, pair only capable devices net/mlx5e: CT: Fix cleanup of CT before cleanup of TC ct rules Revert "net/mlx5e: Allow relaxed ordering over VFs" MAINTAINERS: adjust MELLANOX ETHERNET INNOVA DRIVERS to TLS support removal ==================== Link: https://lore.kernel.org/r/20220608185855.19818-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Andrea Mayer authored
Commit 40867d74 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices") adds a new entry (flowi_l3mdev) in the common flow struct used for indicating the l3mdev index for later rule and table matching. The l3mdev_update_flow() has been adapted to properly set the flowi_l3mdev based on the flowi_oif/flowi_iif. In fact, when a valid flowi_iif is supplied to the l3mdev_update_flow(), this function can update the flowi_l3mdev entry only if it has not yet been set (i.e., the flowi_l3mdev entry is equal to 0). The SRv6 End.DT6 behavior in VRF mode leverages a VRF device in order to force the routing lookup into the associated routing table. This routing operation is performed by seg6_lookup_any_nextop() preparing a flowi6 data structure used by ip6_route_input_lookup() which, in turn, (indirectly) invokes l3mdev_update_flow(). However, seg6_lookup_any_nexthop() does not initialize the new flowi_l3mdev entry which is filled with random garbage data. This prevents l3mdev_update_flow() from properly updating the flowi_l3mdev with the VRF index, and thus SRv6 End.DT6 (VRF mode)/DT46 behaviors are broken. This patch correctly initializes the flowi6 instance allocated and used by seg6_lookup_any_nexhtop(). Specifically, the entire flowi6 instance is wiped out: in case new entries are added to flowi/flowi6 (as happened with the flowi_l3mdev entry), we should no longer have incorrectly initialized values. As a result of this operation, the value of flowi_l3mdev is also set to 0. The proposed fix can be tested easily. Starting from the commit referenced in the Fixes, selftests [1],[2] indicate that the SRv6 End.DT6 (VRF mode)/DT46 behaviors no longer work correctly. By applying this patch, those behaviors are back to work properly again. [1] - tools/testing/selftests/net/srv6_end_dt46_l3vpn_test.sh [2] - tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh Fixes: 40867d74 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices") Reported-by: Anton Makarov <am@3a-alliance.com> Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220608091917.20345-1-andrea.mayer@uniroma2.itSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Simon Horman says: ==================== nfp: fixes for v5.19 this short series includes two fixes for the NFP driver. 1. Restructure GRE+VLAN flower offload to address a miss match between the NIC firmware and driver implementation which prevented these features from working in combination. 2. Prevent unnecessary warnings regarding rate limiting support.- It is expected that this feature to not _always_ be present but this was not taken into account when the code to check for this feature was added. ==================== Link: https://lore.kernel.org/r/20220608092901.124780-1-simon.horman@corigine.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Etienne van der Linde authored
Swap around the GRE and VLAN parts in the flow-key offloaded by the driver to fit in with other tunnel types and the firmware. Without this change used cases with GRE+VLAN on the outer header does not get offloaded as the flow-key mismatches what the firmware expect. Fixes: 0d630f58 ("nfp: flower: add support to offload QinQ match") Fixes: 5a2b9304 ("nfp: flower-ct: compile match sections of flow_payload") Signed-off-by: Etienne van der Linde <etienne.vanderlinde@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Fei Qin authored
nfp_net_sriov_check is added in nfp_app_get_vf_config which intends to ensure ivi->vlan_proto and ivi->max_tx_rate/min_tx_rate can be read from VF config table only when firmware supports corresponding capability. However, "nfp_app_get_vf_config" can be called by commands like "ip a", "ip link set $DEV up" and "ip link set $DEV vf $NUM vlan $param" (with VF). When using commands above, many warnings "ndo_set_vf_<cap_x> not supported" would appear if firmware doesn't support VF rate limit and 802.1ad VLAN assingment. If more VFs are created, things could get worse. Thus, this patch add an extra bool parameter for nfp_net_sriov_check to enable/disable the cap check warning report. Unnecessary warnings in nfp_app_get_vf_config can be avoided. Valid warnings in kinds of vf setting function can be reserved. Fixes: e0d0e1fd ("nfp: VF rate limit support") Fixes: 59359597 ("nfp: support 802.1ad VLAN assingment to VF") Signed-off-by: Fei Qin <fei.qin@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Maxim Mikityanskiy authored
To embrace possible future optimizations of TLS, rename zerocopy sendfile definitions to more generic ones: * setsockopt: TLS_TX_ZEROCOPY_SENDFILE- > TLS_TX_ZEROCOPY_RO * sock_diag: TLS_INFO_ZC_SENDFILE -> TLS_INFO_ZC_RO_TX RO stands for readonly and emphasizes that the application shouldn't modify the data being transmitted with zerocopy to avoid potential disconnection. Fixes: c1318b39 ("tls: Add opt-in zerocopy mode of sendfile()") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Link: https://lore.kernel.org/r/20220608153425.3151146-1-maximmi@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
two fixes for panel self-refresh handling, and one to fix multiple output support on AST. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220609100754.kvrkjy67gqabjuee@houat
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
A use-after-free fix for panfrost, and a DT invalid configuration fix for ti-sn65dsi83 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220526090532.nvhlmwev5qgln3nb@houat
-
- 09 Jun, 2022 26 commits
-
-
David Howells authored
While randstruct was satisfied with using an open-coded "void *" offset cast for the netfs_i_context <-> inode casting, __builtin_object_size() as used by FORTIFY_SOURCE was not as easily fooled. This was causing the following complaint[1] from gcc v12: In file included from include/linux/string.h:253, from include/linux/ceph/ceph_debug.h:7, from fs/ceph/inode.c:2: In function 'fortify_memset_chk', inlined from 'netfs_i_context_init' at include/linux/netfs.h:326:2, inlined from 'ceph_alloc_inode' at fs/ceph/inode.c:463:2: include/linux/fortify-string.h:242:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 242 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix this by embedding a struct inode into struct netfs_i_context (which should perhaps be renamed to struct netfs_inode). The struct inode vfs_inode fields are then removed from the 9p, afs, ceph and cifs inode structs and vfs_inode is then simply changed to "netfs.inode" in those filesystems. Further, rename netfs_i_context to netfs_inode, get rid of the netfs_inode() function that converted a netfs_i_context pointer to an inode pointer (that can now be done with &ctx->inode) and rename the netfs_i_context() function to netfs_inode() (which is now a wrapper around container_of()). Most of the changes were done with: perl -p -i -e 's/vfs_inode/netfs.inode/'g \ `git grep -l 'vfs_inode' -- fs/{9p,afs,ceph,cifs}/*.[ch]` Kees suggested doing it with a pair structure[2] and a special declarator to insert that into the network filesystem's inode wrapper[3], but I think it's cleaner to embed it - and then it doesn't matter if struct randomisation reorders things. Dave Chinner suggested using a filesystem-specific VFS_I() function in each filesystem to convert that filesystem's own inode wrapper struct into the VFS inode struct[4]. Version #2: - Fix a couple of missed name changes due to a disabled cifs option. - Rename nfs_i_context to nfs_inode - Use "netfs" instead of "nic" as the member name in per-fs inode wrapper structs. [ This also undoes commit 507160f4 ("netfs: gcc-12: temporarily disable '-Wattribute-warning' for now") that is no longer needed ] Fixes: bc899ee1 ("netfs: Add a netfs inode context") Reported-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> cc: Jonathan Corbet <corbet@lwn.net> cc: Eric Van Hensbergen <ericvh@gmail.com> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Steve French <smfrench@gmail.com> cc: William Kucharski <william.kucharski@oracle.com> cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> cc: Dave Chinner <david@fromorbit.com> cc: linux-doc@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: samba-technical@lists.samba.org cc: linux-fsdevel@vger.kernel.org cc: linux-hardening@vger.kernel.org Link: https://lore.kernel.org/r/d2ad3a3d7bdd794c6efb562d2f2b655fb67756b9.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/20220517210230.864239-1-keescook@chromium.org/ [2] Link: https://lore.kernel.org/r/20220518202212.2322058-1-keescook@chromium.org/ [3] Link: https://lore.kernel.org/r/20220524101205.GI2306852@dread.disaster.area/ [4] Link: https://lore.kernel.org/r/165296786831.3591209.12111293034669289733.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165305805651.4094995.7763502506786714216.stgit@warthog.procyon.org.uk # v2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Yupeng Li authored
set cpu_hwmon as a module build with loongson_sysconf, loongson_chiptemp undefined error,fix cpu_hwmon compile options to be bool.Some kernel compilation error information is as follows: Checking missing-syscalls for N32 CALL scripts/checksyscalls.sh Checking missing-syscalls for O32 CALL scripts/checksyscalls.sh CALL scripts/checksyscalls.sh CHK include/generated/compile.h CC [M] drivers/platform/mips/cpu_hwmon.o Building modules, stage 2. MODPOST 200 modules ERROR: "loongson_sysconf" [drivers/platform/mips/cpu_hwmon.ko] undefined! ERROR: "loongson_chiptemp" [drivers/platform/mips/cpu_hwmon.ko] undefined! make[1]: *** [scripts/Makefile.modpost:92:__modpost] 错误 1 make: *** [Makefile:1261:modules] 错误 2 Signed-off-by: Yupeng Li <liyupeng@zbhlos.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Huacai Chen <chenhuacai@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull ext2, writeback, and quota fixes and cleanups from Jan Kara: "A fix for race in writeback code and two cleanups in quota and ext2" * tag 'fs_for_v5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: Prevent memory allocation recursion while holding dq_lock writeback: Fix inode->i_io_list not be protected by inode->i_lock error fs: Fix syntax errors in comments
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - On 32-bit fix overread/overwrite of thread_struct via ptrace PEEK/POKE. - Fix softirqs not switching to the softirq stack since we moved irq_exit(). - Force thread size increase when KASAN is enabled to avoid stack overflows. - On Book3s 64 mark more code as not to be instrumented by KASAN to avoid crashes. - Exempt __get_wchan() from KASAN checking, as it's inherently racy. - Fix a recently introduced crash in the papr_scm driver in some configurations. - Remove include of <generated/compile.h> which is forbidden. Thanks to Ariel Miculas, Chen Jingwen, Christophe Leroy, Erhard Furtner, He Ying, Kees Cook, Masahiro Yamada, Nageswara R Sastry, Paul Mackerras, Sachin Sant, Vaibhav Jain, and Wanming Hu. * tag 'powerpc-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/32: Fix overread/overwrite of thread_struct via ptrace powerpc/book3e: get rid of #include <generated/compile.h> powerpc/kasan: Force thread size increase with KASAN powerpc/papr_scm: don't requests stats with '0' sized stats buffer powerpc: Don't select HAVE_IRQ_EXIT_ON_IRQ_STACK powerpc/kasan: Silence KASAN warnings in __get_wchan() powerpc/kasan: Mark more real-mode code as not to be instrumented
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from bpf and netfilter. Current release - regressions: - eth: amt: fix possible null-ptr-deref in amt_rcv() Previous releases - regressions: - tcp: use alloc_large_system_hash() to allocate table_perturb - af_unix: fix a data-race in unix_dgram_peer_wake_me() - nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling - eth: ixgbe: fix unexpected VLAN rx in promisc mode on VF Previous releases - always broken: - ipv6: fix signed integer overflow in __ip6_append_data - netfilter: - nat: really support inet nat without l3 address - nf_tables: memleak flow rule from commit path - bpf: fix calling global functions from BPF_PROG_TYPE_EXT programs - openvswitch: fix misuse of the cached connection on tuple changes - nfc: nfcmrvl: fix memory leak in nfcmrvl_play_deferred - eth: altera: fix refcount leak in altera_tse_mdio_create Misc: - add Quentin Monnet to bpftool maintainers" * tag 'net-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits) net: amd-xgbe: fix clang -Wformat warning tcp: use alloc_large_system_hash() to allocate table_perturb net: dsa: realtek: rtl8365mb: fix GMII caps for ports with internal PHY net: dsa: mv88e6xxx: correctly report serdes link failure net: dsa: mv88e6xxx: fix BMSR error to be consistent with others net: dsa: mv88e6xxx: use BMSR_ANEGCOMPLETE bit for filling an_complete net: altera: Fix refcount leak in altera_tse_mdio_create net: openvswitch: fix misuse of the cached connection on tuple changes net: ethernet: mtk_eth_soc: fix misuse of mem alloc interface netdev[napi]_alloc_frag ip_gre: test csum_start instead of transport header au1000_eth: stop using virt_to_bus() ipv6: Fix signed integer overflow in l2tp_ip6_sendmsg ipv6: Fix signed integer overflow in __ip6_append_data nfc: nfcmrvl: Fix memory leak in nfcmrvl_play_deferred nfc: st21nfca: fix incorrect sizing calculations in EVT_TRANSACTION nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling nfc: st21nfca: fix incorrect validating logic in EVT_TRANSACTION net: ipv6: unexport __init-annotated seg6_hmac_init() net: xfrm: unexport __init-annotated xfrm4_protocol_init() net: mdio: unexport __init-annotated mdio_bus_init() ...
-
Linus Torvalds authored
This is a pure band-aid so that I can continue merging stuff from people while some of the gcc-12 fallout gets sorted out. In particular, gcc-12 is very unhappy about the kinds of pointer arithmetic tricks that netfs does, and that makes the fortify checks trigger in afs and ceph: In function ‘fortify_memset_chk’, inlined from ‘netfs_i_context_init’ at include/linux/netfs.h:327:2, inlined from ‘afs_set_netfs_context’ at fs/afs/inode.c:61:2, inlined from ‘afs_root_iget’ at fs/afs/inode.c:543:2: include/linux/fortify-string.h:258:25: warning: call to ‘__write_overflow_field’ declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 258 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ and the reason is that netfs_i_context_init() is passed a 'struct inode' pointer, and then it does struct netfs_i_context *ctx = netfs_i_context(inode); memset(ctx, 0, sizeof(*ctx)); where that netfs_i_context() function just does pointer arithmetic on the inode pointer, knowing that the netfs_i_context is laid out immediately after it in memory. This is all truly disgusting, since the whole "netfs_i_context is laid out immediately after it in memory" is not actually remotely true in general, but is just made to be that way for afs and ceph. See for example fs/cifs/cifsglob.h: struct cifsInodeInfo { struct { /* These must be contiguous */ struct inode vfs_inode; /* the VFS's inode record */ struct netfs_i_context netfs_ctx; /* Netfslib context */ }; [...] and realize that this is all entirely wrong, and the pointer arithmetic that netfs_i_context() is doing is also very very wrong and wouldn't give the right answer if netfs_ctx had different alignment rules from a 'struct inode', for example). Anyway, that's just a long-winded way to say "the gcc-12 warning is actually quite reasonable, and our code happens to work but is pretty disgusting". This is getting fixed properly, but for now I made the mistake of thinking "the week right after the merge window tends to be calm for me as people take a breather" and I did a sustem upgrade. And I got gcc-12 as a result, so to continue merging fixes from people and not have the end result drown in warnings, I am fixing all these gcc-12 issues I hit. Including with these kinds of temporary fixes. Cc: Kees Cook <keescook@chromium.org> Cc: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/all/AEEBCF5D-8402-441D-940B-105AA718C71F@chromium.org/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
In commit 8b202ee2 ("s390: disable -Warray-bounds") the s390 people disabled the '-Warray-bounds' warning for gcc-12, because the new logic in gcc would cause warnings for their use of the S390_lowcore macro, which accesses absolute pointers. It turns out gcc-12 has many other issues in this area, so this takes that s390 warning disable logic, and turns it into a kernel build config entry instead. Part of the intent is that we can make this all much more targeted, and use this conflig flag to disable it in only particular configurations that cause problems, with the s390 case as an example: select GCC12_NO_ARRAY_BOUNDS and we could do that for other configuration cases that cause issues. Or we could possibly use the CONFIG_CC_NO_ARRAY_BOUNDS thing in a more targeted way, and disable the warning only for particular uses: again the s390 case as an example: KBUILD_CFLAGS_DECOMPRESSOR += $(if $(CONFIG_CC_NO_ARRAY_BOUNDS),-Wno-array-bounds) but this ends up just doing it globally in the top-level Makefile, since the current issues are spread fairly widely all over: KBUILD_CFLAGS-$(CONFIG_CC_NO_ARRAY_BOUNDS) += -Wno-array-bounds We'll try to limit this later, since the gcc-12 problems are rare enough that *much* of the kernel can be built with it without disabling this warning. Cc: Kees Cook <keescook@chromium.org> Cc: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
gcc-12 started warning about 'tracker' being used uninitialized: drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c: In function ‘mlx5_do_bond’: drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c:786:28: warning: ‘tracker’ is used uninitialized [-Wuninitialized] 786 | struct lag_tracker tracker; | ^~~~~~~ which seems to be because it doesn't track how the use (and initialization) is bound by the 'do_bond' flag. But admittedly that 'do_bond' usage is fairly complicated, and involves passing it around as an argument to helper functions, so it's somewhat understandable that gcc doesn't see how that all works. This function could be rewritten to make the use of that tracker variable more obviously safe, but for now I'm just adding the forced initialization of it. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
While the concept of checking for dangling pointers to local variables at function exit is really interesting, the gcc-12 implementation is not compatible with reality, and results in false positives. For example, gcc sees us putting things on a local list head allocated on the stack, which involves exactly those kinds of pointers to the local stack entry: In function ‘__list_add’, inlined from ‘list_add_tail’ at include/linux/list.h:102:2, inlined from ‘rebuild_snap_realms’ at fs/ceph/snap.c:434:2: include/linux/list.h:74:19: warning: storing the address of local variable ‘realm_queue’ in ‘*&realm_27(D)->rebuild_item.prev’ [-Wdangling-pointer=] 74 | new->prev = prev; | ~~~~~~~~~~^~~~~~ But then gcc - understandably - doesn't really understand the big picture how the doubly linked list works, so doesn't see how we then end up emptying said list head in a loop and the pointer we added has been removed. Gcc also complains about us (intentionally) using this as a way to store a kind of fake stack trace, eg drivers/acpi/acpica/utdebug.c:40:38: warning: storing the address of local variable ‘current_sp’ in ‘acpi_gbl_entry_stack_pointer’ [-Wdangling-pointer=] 40 | acpi_gbl_entry_stack_pointer = ¤t_sp; | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~ which is entirely reasonable from a compiler standpoint, and we may want to change those kinds of patterns, but not not. So this is one of those "it would be lovely if the compiler were to complain about us leaving dangling pointers to the stack", but not this way. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Gcc-12 correctly warned about this code using a non-NULL pointer as a truth value: drivers/gpu/drm/imx/ipuv3-crtc.c: In function ‘ipu_crtc_disable_planes’: drivers/gpu/drm/imx/ipuv3-crtc.c:72:21: error: the comparison will always evaluate as ‘true’ for the address of ‘plane’ will never be NULL [-Werror=address] 72 | if (&ipu_crtc->plane[1] && plane == &ipu_crtc->plane[1]->base) | ^ due to the extraneous '&' address-of operator. Philipp Zabel points out that The mistake had no adverse effect since the following condition doesn't actually dereference the NULL pointer, but the intent of the code was obviously to check for it, not to take the address of the member. Fixes: eb8c8880 ("drm/imx: add deferred plane disabling") Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Michael Ellerman authored
The ptrace PEEKUSR/POKEUSR (aka PEEKUSER/POKEUSER) API allows a process to read/write registers of another process. To get/set a register, the API takes an index into an imaginary address space called the "USER area", where the registers of the process are laid out in some fashion. The kernel then maps that index to a particular register in its own data structures and gets/sets the value. The API only allows a single machine-word to be read/written at a time. So 4 bytes on 32-bit kernels and 8 bytes on 64-bit kernels. The way floating point registers (FPRs) are addressed is somewhat complicated, because double precision float values are 64-bit even on 32-bit CPUs. That means on 32-bit kernels each FPR occupies two word-sized locations in the USER area. On 64-bit kernels each FPR occupies one word-sized location in the USER area. Internally the kernel stores the FPRs in an array of u64s, or if VSX is enabled, an array of pairs of u64s where one half of each pair stores the FPR. Which half of the pair stores the FPR depends on the kernel's endianness. To handle the different layouts of the FPRs depending on VSX/no-VSX and big/little endian, the TS_FPR() macro was introduced. Unfortunately the TS_FPR() macro does not take into account the fact that the addressing of each FPR differs between 32-bit and 64-bit kernels. It just takes the index into the "USER area" passed from userspace and indexes into the fp_state.fpr array. On 32-bit there are 64 indexes that address FPRs, but only 32 entries in the fp_state.fpr array, meaning the user can read/write 256 bytes past the end of the array. Because the fp_state sits in the middle of the thread_struct there are various fields than can be overwritten, including some pointers. As such it may be exploitable. It has also been observed to cause systems to hang or otherwise misbehave when using gdbserver, and is probably the root cause of this report which could not be easily reproduced: https://lore.kernel.org/linuxppc-dev/dc38afe9-6b78-f3f5-666b-986939e40fc6@keymile.com/ Rather than trying to make the TS_FPR() macro even more complicated to fix the bug, or add more macros, instead add a special-case for 32-bit kernels. This is more obvious and hopefully avoids a similar bug happening again in future. Note that because 32-bit kernels never have VSX enabled the code doesn't need to consider TS_FPRWIDTH/OFFSET at all. Add a BUILD_BUG_ON() to ensure that 32-bit && VSX is never enabled. Fixes: 87fec051 ("powerpc: PTRACE_PEEKUSR/PTRACE_POKEUSER of FPR registers in little endian builds") Cc: stable@vger.kernel.org # v3.13+ Reported-by: Ariel Miculas <ariel.miculas@belden.com> Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220609133245.573565-1-mpe@ellerman.id.au
-
Thomas Zimmermann authored
Systems with AST graphics can have multiple output; typically VGA plus some other port. Record detected output chips in a bitmask and initialize each output on its own. Assume a VGA output by default and use SIL164 and DP501 if available. For ASTDP assume that it can run in parallel with VGA. Tested on AST2100. v3: * define a macro for each BIT(ast_tx_chip) (Patrik) v2: * make VGA/SIL164/DP501 mutually exclusive Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Fixes: a59b0264 ("drm/ast: Initialize encoder and connector for VGA in helper function") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220607092008.22123-2-tzimmermann@suse.de (cherry picked from commit 7f35680a) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-5.19-2022-06-08' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.19-2022-06-08: amdgpu: - DCN 3.1 golden settings fix - eDP fixes - DMCUB fixes - GFX11 fixes and cleanups - VCN fix for yellow carp - GMC11 fixes - RAS fixes - GPUVM TLB flush fixes - SMU13 fixes - VCN3 AV1 regression fix - VCN2 JPEG fix - Other misc fixes amdkfd: - MMU notifier fix - Support for more GC 10.3.x families - Pinned BO handling fix - Partial migration bug fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220608203008.6187-1-alexander.deucher@amd.com
-
Justin Stitt authored
see warning: | drivers/net/ethernet/amd/xgbe/xgbe-drv.c:2787:43: warning: format specifies | type 'unsigned short' but the argument has type 'int' [-Wformat] | netdev_dbg(netdev, "Protocol: %#06hx\n", ntohs(eth->h_proto)); | ~~~~~~ ^~~~~~~~~~~~~~~~~~~ Variadic functions (printf-like) undergo default argument promotion. Documentation/core-api/printk-formats.rst specifically recommends using the promoted-to-type's format flag. Also, as per C11 6.3.1.1: (https://www.open-std.org/jtc1/sc22/wg14/www/docs/n1548.pdf) `If an int can represent all values of the original type ..., the value is converted to an int; otherwise, it is converted to an unsigned int. These are called the integer promotions.` Since the argument is a u16 it will get promoted to an int and thus it is most accurate to use the %x format specifier here. It should be noted that the `#06` formatting sugar does not alter the promotion rules. Link: https://github.com/ClangBuiltLinux/linux/issues/378Signed-off-by: Justin Stitt <jstitt007@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20220607191119.20686-1-jstitt007@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Muchun Song authored
In our server, there may be no high order (>= 6) memory since we reserve lots of HugeTLB pages when booting. Then the system panic. So use alloc_large_system_hash() to allocate table_perturb. Fixes: e9261476 ("tcp: dynamically allocate the perturb table used by source ports") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220607070214.94443-1-songmuchun@bytedance.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Alvin Šipraga authored
Since commit a18e6521 ("net: phylink: handle NA interface mode in phylink_fwnode_phy_connect()"), phylib defaults to GMII when no phy-mode or phy-connection-type property is specified in a DSA port node of the device tree. The same commit caused a regression in rtl8365mb whereby phylink would fail to connect, because the driver did not advertise support for GMII for ports with internal PHY. It should be noted that the aforementioned regression is not because the blamed commit was incorrect: on the contrary, the blamed commit is correcting the previous behaviour whereby unspecified phy-mode would cause the internal interface mode to be PHY_INTERFACE_MODE_NA. The rtl8365mb driver only worked by accident before because it _did_ advertise support for PHY_INTERFACE_MODE_NA, despite NA being reserved for internal use by phylink. With one mistake fixed, the other was exposed. Commit a5dba0f2 ("net: dsa: rtl8365mb: add GMII as user port mode") then introduced implicit support for GMII mode on ports with internal PHY to allow a PHY connection for device trees where the phy-mode is not explicitly set to "internal". At this point everything was working OK again. Subsequently, commit 6ff60646 ("net: dsa: realtek: convert to phylink_generic_validate()") broke this behaviour again by discarding the usage of rtl8365mb_phy_mode_supported() - where this GMII support was indicated - while switching to the new .phylink_get_caps API. With the new API, rtl8365mb_phy_mode_supported() is no longer needed. Remove it altogether and add back the GMII capability - this time to rtl8365mb_phylink_get_caps() - so that the above default behaviour works for ports with internal PHY again. Fixes: 6ff60646 ("net: dsa: realtek: convert to phylink_generic_validate()") Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20220607184624.417641-1-alvin@pqrs.dkSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-06-07 This series contains updates to ixgbe driver only. Olivier Matz resolves an issue so that broadcast packets can still be received when VF removes promiscuous settings and removes setting of VLAN promiscuous, in promiscuous mode, to prevent a loop when VFs are bridged. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ixgbe: fix unexpected VLAN Rx in promisc mode on VF ixgbe: fix bcast packets Rx on VF after promisc removal ==================== Link: https://lore.kernel.org/r/20220607181538.748786-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Russell King says: ==================== mv88e6xxx: fixes for reading serdes state These are some low-priority fixes to the mv88e6xxx serdes code. Patch 1 fixes the reporting of an_complete, which is used in the emulation of a conventional C22 PHY. Patch from Marek. Patch 2 makes one of the error messages in patch 2 to be consistent with the other error messages in this function. Patch 3 ensures that we do not miss a link-failure event. ==================== Link: https://lore.kernel.org/r/Yp82TyoLon9jz6k3@shell.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Russell King (Oracle) authored
Phylink wants to know if the link has dropped since the last time state was retrieved, and the BMSR gives us that. Read the BMSR and use it when deciding the link state. Fill in the an_complete member as well for the emulated PHY state. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Russell King (Oracle) authored
Other errors accessing the registers in mv88e6352_serdes_pcs_get_state() print "PHY " before the register name, except for the BMSR. Make this consistent with the other error messages. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Marek Behún authored
Commit ede359d8 ("net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed") added the ability to link if AN was bypassed, and added filling of state->an_complete field, but set it to true if AN was enabled in BMCR, not when AN was reported complete in BMSR. This was done because for some reason, when I wanted to use BMSR value to infer an_complete, I was looking at BMSR_ANEGCAPABLE bit (which was always 1), instead of BMSR_ANEGCOMPLETE bit. Use BMSR_ANEGCOMPLETE for filling state->an_complete. Fixes: ede359d8 ("net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Miaoqian Lin authored
Every iteration of for_each_child_of_node() decrements the reference count of the previous node. When break from a for_each_child_of_node() loop, we need to explicitly call of_node_put() on the child node when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: bbd2190c ("Altera TSE: Add main and header file for Altera Ethernet Driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220607041144.7553-1-linmq006@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Ilya Maximets authored
If packet headers changed, the cached nfct is no longer relevant for the packet and attempt to re-use it leads to the incorrect packet classification. This issue is causing broken connectivity in OpenStack deployments with OVS/OVN due to hairpin traffic being unexpectedly dropped. The setup has datapath flows with several conntrack actions and tuple changes between them: actions:ct(commit,zone=8,mark=0/0x1,nat(src)), set(eth(src=00:00:00:00:00:01,dst=00:00:00:00:00:06)), set(ipv4(src=172.18.2.10,dst=192.168.100.6,ttl=62)), ct(zone=8),recirc(0x4) After the first ct() action the packet headers are almost fully re-written. The next ct() tries to re-use the existing nfct entry and marks the packet as invalid, so it gets dropped later in the pipeline. Clearing the cached conntrack entry whenever packet tuple is changed to avoid the issue. The flow key should not be cleared though, because we should still be able to match on the ct_state if the recirculation happens after the tuple change but before the next ct() action. Cc: stable@vger.kernel.org Fixes: 7f8a436e ("openvswitch: Add conntrack action") Reported-by: Frode Nordahl <frode.nordahl@canonical.com> Link: https://mail.openvswitch.org/pipermail/ovs-discuss/2022-May/051829.html Link: https://bugs.launchpad.net/ubuntu/+source/ovn/+bug/1967856Signed-off-by: Ilya Maximets <i.maximets@ovn.org> Link: https://lore.kernel.org/r/20220606221140.488984-1-i.maximets@ovn.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Chen Lin authored
When rx_flag == MTK_RX_FLAGS_HWLRO, rx_data_len = MTK_MAX_LRO_RX_LENGTH(4096 * 3) > PAGE_SIZE. netdev_alloc_frag is for alloction of page fragment only. Reference to other drivers and Documentation/vm/page_frags.rst Branch to use __get_free_pages when ring->frag_size > PAGE_SIZE. Signed-off-by: Chen Lin <chen45464546@163.com> Link: https://lore.kernel.org/r/1654692413-2598-1-git-send-email-chen45464546@163.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Willem de Bruijn authored
GRE with TUNNEL_CSUM will apply local checksum offload on CHECKSUM_PARTIAL packets. ipgre_xmit must validate csum_start after an optional skb_pull, else lco_csum may trigger an overflow. The original check was if (csum && skb_checksum_start(skb) < skb->data) return -EINVAL; This had false positives when skb_checksum_start is undefined: when ip_summed is not CHECKSUM_PARTIAL. A discussed refinement was straightforward if (csum && skb->ip_summed == CHECKSUM_PARTIAL && skb_checksum_start(skb) < skb->data) return -EINVAL; But was eventually revised more thoroughly: - restrict the check to the only branch where needed, in an uncommon GRE path that uses header_ops and calls skb_pull. - test skb_transport_header, which is set along with csum_start in skb_partial_csum_set in the normal header_ops datapath. Turns out skbs can arrive in this branch without the transport header set, e.g., through BPF redirection. Revise the check back to check csum_start directly, and only if CHECKSUM_PARTIAL. Do leave the check in the updated location. Check field regardless of whether TUNNEL_CSUM is configured. Link: https://lore.kernel.org/netdev/YS+h%2FtqCJJiQei+W@shredder/ Link: https://lore.kernel.org/all/20210902193447.94039-2-willemdebruijn.kernel@gmail.com/T/#u Fixes: 8a0ed250 ("ip_gre: validate csum_start only on pull") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20220606132107.3582565-1-willemdebruijn.kernel@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2022-06-09 We've added 6 non-merge commits during the last 2 day(s) which contain a total of 8 files changed, 49 insertions(+), 15 deletions(-). The main changes are: 1) Fix an illegal copy_to_user() attempt seen by syzkaller through arm64 BPF JIT compiler, from Eric Dumazet. 2) Fix calling global functions from BPF_PROG_TYPE_EXT programs by using the correct program context type, from Toke Høiland-Jørgensen. 3) Fix XSK TX batching invalid descriptor handling, from Maciej Fijalkowski. 4) Fix potential integer overflows in multi-kprobe link code by using safer kvmalloc_array() allocation helpers, from Dan Carpenter. 5) Add Quentin as bpftool maintainer, from Quentin Monnet. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: MAINTAINERS: Add a maintainer for bpftool xsk: Fix handling of invalid descriptors in XSK TX batching API selftests/bpf: Add selftest for calling global functions from freplace bpf: Fix calling global functions from BPF_PROG_TYPE_EXT programs bpf: Use safer kvmalloc_array() where possible bpf, arm64: Clear prog->jited_len along prog->jited ==================== Link: https://lore.kernel.org/r/20220608234133.32265-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 08 Jun, 2022 2 commits
-
-
Linus Torvalds authored
OpenSSL 3.0 deprecated the OpenSSL's ENGINE API. That is as may be, but the kernel build host tools still use it. Disable the warning about deprecated declarations until somebody who cares fixes it. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Yifan Zhang authored
invalid/prime icahce operation takes effect both pipes cuconrrently, therefore CP_MES_IC_BASE_LO/HI and CP_MES_MDBASE_LO/HI both have to be set before prime icache. Otherwise MES hardware gets garbage data in above regsters and causes page fault [ 470.873200] amdgpu 0000:33:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:217 vmid:0 pasid:0, for process pid 0 thread pid 0) [ 470.873222] amdgpu 0000:33:00.0: amdgpu: in page starting at address 0x000092cb89b00000 from client 10 [ 470.873234] amdgpu 0000:33:00.0: amdgpu: GCVM_L2_PROTECTION_FAULT_STATUS:0x00000BB3 [ 470.873242] amdgpu 0000:33:00.0: amdgpu: Faulty UTCL2 client ID: CPC (0x5) [ 470.873247] amdgpu 0000:33:00.0: amdgpu: MORE_FAULTS: 0x1 [ 470.873251] amdgpu 0000:33:00.0: amdgpu: WALKER_ERROR: 0x1 [ 470.873256] amdgpu 0000:33:00.0: amdgpu: PERMISSION_FAULTS: 0xb [ 470.873260] amdgpu 0000:33:00.0: amdgpu: MAPPING_ERROR: 0x1 [ 470.873264] amdgpu 0000:33:00.0: amdgpu: RW: 0x0 Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-