drm-misc-next for v6.7-rc1:

drm-misc-next-2023-10-19 + following:

UAPI Changes:

Cross-subsystem Changes:
- Convert fbdev drivers to use fbdev i/o mem helpers.

Core Changes:
- Use cross-references for macros in docs.
- Make drm_client_buffer_addb use addfb2.
- Add NV20 and NV30 YUV formats.
- Documentation updates for create_dumb ioctl.
- CI fixes.
- Allow variable number of run-queues in scheduler.

Driver Changes:
- Rename drm/ast constants.
- Make ili9882t its own driver.
- Assorted fixes in ivpu, vc4, bridge/synopsis, amdgpu.
- Add planar formats to rockchip.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3d92fae8-9b1b-4165-9ca8-5fda11ee146b@linux.intel.com

usb: typec: altmodes/displayport: Signal hpd low when exiting mode
and
drm: Add HPD state to drm_connector_oob_hotplug_event()

sideswiped each other.

Signal disconnected always.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Rather than doing this in the IP code for the SDMA paging
engine, move it up to the core device level init level.
This should fix the scheduler init ordering.

v2: drop extra parens
v3: drop SDMA helpers
v4: Added a Fixes tag because amdgpu dereferences an uninitialized
    scheduler without this patch, and this patch fixes this. (Luben)
Tested-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20231025171928.3318505-1-alexander.deucher@amd.comAcked-by: Christian König <christian.koenig@amd.com>
Fixes: 56e44960 ("drm/sched: Convert the GPU scheduler to variable number of run-queues")
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>

Update the GPU Scheduler maintainer email.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Cc: Direct Rendering Infrastructure - Development <dri-devel@lists.freedesktop.org>
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Link: https://lore.kernel.org/r/20231026174438.18427-2-ltuikov89@gmail.com

The GPU scheduler has now a variable number of run-queues, which are set up at
drm_sched_init() time. This way, each driver announces how many run-queues it
requires (supports) per each GPU scheduler it creates. Note, that run-queues
correspond to scheduler "priorities", thus if the number of run-queues is set
to 1 at drm_sched_init(), then that scheduler supports a single run-queue,
i.e. single "priority". If a driver further sets a single entity per
run-queue, then this creates a 1-to-1 correspondence between a scheduler and
a scheduled entity.

Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Emma Anholt <emma@anholt.net>
Cc: etnaviv@lists.freedesktop.org
Cc: lima@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20231023032251.164775-1-luben.tuikov@amd.com

DRM CI keeps track of which tests are failing, flaking or being skipped
by the ci in the expectations files. Add entries for those files to the
corresponding driver maintainer, so they can be notified when they
change.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230919182249.153499-1-helen.koike@collabora.comSigned-off-by: Maxime Ripard <mripard@kernel.org>

Clarify the procedure developer must follow to request privileges to
run tests on Freedesktop gitlab CI.

This measure was added to avoid untrusted people to misuse the
infrastructure.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-11-helen.koike@collabora.comSigned-off-by: Maxime Ripard <mripard@kernel.org>

Since the kernel doesn't use a bot like Mesa that requires tests to pass
in order to merge the patches, leave it to developers and/or maintainers
to manually retry.
Suggested-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-10-helen.koike@collabora.comSigned-off-by: Maxime Ripard <mripard@kernel.org>

Export the resultant kernel config, making it easier to verify if the
resultant config was correctly generated.
Suggested-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-9-helen.koike@collabora.comSigned-off-by: Maxime Ripard <mripard@kernel.org>

With the new sharding, the default job timeout is not enough for i915
and their jobs are failing before completing.

See below the current execution time:

🞋 job i915:tgl 8/8 has new status: success (37m3s)
🞋 job i915:tgl 7/8 has new status: success (19m43s)
🞋 job i915:tgl 6/8 has new status: success (21m47s)
🞋 job i915:tgl 5/8 has new status: success (18m16s)
🞋 job i915:tgl 4/8 has new status: success (21m43s)
🞋 job i915:tgl 3/8 has new status: success (17m59s)
🞋 job i915:tgl 2/8 has new status: success (22m15s)
🞋 job i915:tgl 1/8 has new status: success (18m52s)
🞋 job i915:cml 2/2 has new status: success (1h19m58s)
🞋 job i915:cml 1/2 has new status: success (55m45s)
🞋 job i915:whl 2/2 has new status: success (1h8m56s)
🞋 job i915:whl 1/2 has new status: success (54m3s)
🞋 job i915:kbl 3/3 has new status: success (37m43s)
🞋 job i915:kbl 2/3 has new status: success (36m37s)
🞋 job i915:kbl 1/3 has new status: success (34m52s)
🞋 job i915:amly 2/2 has new status: success (1h7m60s)
🞋 job i915:amly 1/2 has new status: success (59m18s)
🞋 job i915:glk 2/2 has new status: success (58m26s)
🞋 job i915:glk 1/2 has new status: success (50m23s)
🞋 job i915:apl 3/3 has new status: success (1h6m39s)
🞋 job i915:apl 2/3 has new status: success (1h4m45s)
🞋 job i915:apl 1/3 has new status: success (1h7m38s)

(generated with ci_run_n_monitor.py script)

The longest job is 1h19m58s, so adjust the timeout.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-8-helen.koike@collabora.comSigned-off-by: Maxime Ripard <mripard@kernel.org>

The Collabora Lava farm added a tag called `subset-1-gfx` to half of
devices the graphics community use.

Lets use this tag so we don't occupy all the resources.

This is particular important because Mesa3D shares the resources with
DRM-CI and use them to do pre-merge tests, so it can block developers
from getting their patches merged.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-7-helen.koike@collabora.comSigned-off-by: Maxime Ripard <mripard@kernel.org>

Since the script that collected the list of the expectation files was
bogus and placing test to the flakes list incorrectly, restart the
expectation files with the correct script.

This reduces a lot the number of tests in the flakes list.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-6-helen.koike@collabora.comSigned-off-by: Maxime Ripard <mripard@kernel.org>

IGT has recently merged a patch that makes code_getversion test to fails
if the driver isn't loaded or if it isn't the expected one defined in
variable IGT_FORCE_DRIVER.

Without this test, jobs were passing when the driver didn't load or
probe for some reason, giving the illusion that everything was ok.

Uprev IGT to include this modification and include core_getversion test
in all the shards.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-5-helen.koike@collabora.comSigned-off-by: Maxime Ripard <mripard@kernel.org>

Add helper script that given a gitlab pipeline url, analyse which are
the failures and flakes and update the xfails folder accordingly.

Example:
Trigger a pipeline in gitlab infrastructure, than re-try a few jobs more
than once (so we can have data if failures are consistent across jobs
with the same name or if they are flakes) and execute:

update-xfails.py https://gitlab.freedesktop.org/helen.fornazier/linux/-/pipelines/970661

git diff should show you that it updated files in xfails folder.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Tested-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-4-helen.koike@collabora.comSigned-off-by: Maxime Ripard <mripard@kernel.org>

amdgpu driver wasn't loading because amdgpu firmware wasn't being
installed in the rootfs due to the wrong DEBIAN_ARCH variable.

rename ARCH to DEBIAN_ARCH also, so we don't have the confusing
DEBIAN_ARCH, KERNEL_ARCH and ARCH.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-3-helen.koike@collabora.comSigned-off-by: Maxime Ripard <mripard@kernel.org>

When building containers, some rust packages were installed without
locking the dependencies version, which got updated and started giving
errors like:

error: failed to compile `bindgen-cli v0.62.0`, intermediate artifacts can be found at `/tmp/cargo-installkNKRwf`
Caused by:
  package `rustix v0.38.13` cannot be built because it requires rustc 1.63 or newer, while the currently active rustc version is 1.60.0

A patch to Mesa was added fixing this error, so update it.

Also, commit in linux kernel 6.6 rc3 broke booting in crosvm.
Mesa has upreved crosvm to fix this issue.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
[crosvm mesa update]
Co-Developed-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
[v1 container build uprev]
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-2-helen.koike@collabora.comSigned-off-by: Maxime Ripard <mripard@kernel.org>

Dependency for CONFIG_DRM_PANEL_EDP.  Missing this was causing the drm
driver to not probe on devices that use panel-edp.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Link: https://lore.kernel.org/r/20231002164715.157298-1-robdclark@gmail.comSigned-off-by: Maxime Ripard <mripard@kernel.org>

Enable CONFIG_MSM_MMCC_8996, the multimedia clock controller on Qualcomm
MSM8996 to prevent the the board from hitting the probe deferral
timeouts in CI run.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Link: https://lore.kernel.org/r/20231008132320.762542-2-dmitry.baryshkov@linaro.orgSigned-off-by: Maxime Ripard <mripard@kernel.org>

In case of the merge requests it might be useful to push repo-specific
fixes which have not yet propagated to the -external-fixes branch in the
main UPSTREAM_REPO. For example, in case of drm/msm development, we are
staging fixes locally for testing, before pushing them to the drm/drm
repo. Thus, if the CI run was triggered by merge request, also pick up
the -external fixes basing on the the CI_MERGE target repo / and branch.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Helen Koike <helen.koike@collabora.com>
Link: https://lore.kernel.org/r/20231008132320.762542-1-dmitry.baryshkov@linaro.orgSigned-off-by: Maxime Ripard <mripard@kernel.org>

Flaky tests can be very difficult to reproduce after the facts, which
will make it even harder to ever fix.

Let's document the metadata we agreed on to provide more context to
anyone trying to address these fixes.

Link: https://lore.kernel.org/dri-devel/CAPj87rPbJ1V1-R7WMTHkDat2A4nwSd61Df9mdGH2PR=ZzxaU=Q@mail.gmail.com/Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231025142441.745947-1-mripard@kernel.org

The main motivation is to repeat that dumb buffers should not be
abused for anything else than basic software rendering with KMS.
User-space devs are more likely to look at the IOCTL docs than to
actively search for the driver-oriented "Dumb Buffer Objects"
section.

v2: reference DRM_CAP_DUMB_BUFFER, DRM_CAP_DUMB_PREFERRED_DEPTH and
DRM_CAP_DUMB_PREFER_SHADOW (Pekka)
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821131548.269204-1-contact@emersion.fr

amd-drm-next-6.7-2023-10-20:

amdgpu:
- SMU 13 updates
- UMSCH updates
- DC MPO fixes
- RAS updates
- MES 11 fixes
- Fix possible memory leaks in error pathes
- GC 11.5 fixes
- Kernel doc updates
- PSP updates
- APU IMU fixes
- Misc code cleanups
- SMU 11 fixes
- OD fix
- Frame size warning fixes
- SR-IOV fixes
- NBIO 7.11 updates
- NBIO 7.7 updates
- XGMI fixes
- devcoredump updates

amdkfd:
- Misc code cleanups
- SVM fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020195043.4937-1-alexander.deucher@amd.com

Add support for displaying 10-bit 4:2:0 and 4:2:2 formats produced by
the Rockchip Video Decoder on RK322X, RK3288, RK3328 and RK3399.
Also add support for 10-bit 4:4:4 format while at it.

V5: Use drm_format_info_min_pitch() for correct bpp
    Add missing NV21, NV61 and NV42 formats
V4: Rework RK3328/RK3399 win0/1 data to not affect RK3368
V2: Added NV30 support
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Sandy Huang <hjc@rock-chips.com>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231023173718.188102-3-jonas@kwiboo.se

DRM_FORMAT_NV20 and DRM_FORMAT_NV30 formats is the 2x1 and non-subsampled
variant of NV15, a 10-bit 2-plane YUV format that has no padding between
components. Instead, luminance and chrominance samples are grouped into 4s
so that each group is packed into an integer number of bytes:

YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes

The '20' and '30' suffix refers to the optimum effective bits per pixel
which is achieved when the total number of luminance samples is a multiple
of 4.

V2: Added NV30 format
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Sandy Huang <hjc@rock-chips.com>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231023173718.188102-2-jonas@kwiboo.se

formats_win_full_10bit is for cluster window,
formats_win_full_10bit_yuyv is for rk356x esmart, rk3588 esmart window
will support more format.
formats_win_lite is for smart window.

Rename it based the windows type may let meaning is clearer
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018094339.2476142-1-andyshrk@163.com

Add 10 bit RGB and AFBC based YUV format supported
by vop2.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018094318.2476081-1-andyshrk@163.com

The cluster window on vop2 doesn't support linear yuv
format(NV12/16/24), it only support afbc based yuv
format(DRM_FORMAT_YUV420_8BIT/10BIT), which will be
added in next patch.

Fixes: 604be855 ("drm/rockchip: Add VOP2 driver")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018094239.2475851-1-andyshrk@163.com

We can't rely on cpp for bpp calculation as the cpp of
some formats(DRM_FORMAT_YUV420_8BIT/10BIT, etc) is zero.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018094210.2475771-1-andyshrk@163.com

In order to support burst mode, vendor drivers set lane_mbps higher than
bandwidth through DPI interface.  So, calculate horizontal component lane
byte clock cycle(lbcc) based on lane_mbps instead of pixel clock rate for
burst mode.

Fixes: ac87d236 ("drm/bridge: synopsys: dw-mipi-dsi: Use pixel clock rate to calculate lbcc")
Reported-by: Heiko Stübner <heiko@sntech.de>
Closes: https://lore.kernel.org/linux-arm-kernel/5979575.UjTJXf6HLC@diego/T/#u
Tested-by: Heiko Stübner <heiko@sntech.de> # px30 minievb with xinpeng xpp055c272
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018035212.1778767-1-victor.liu@nxp.com

Currently drm_client_buffer_addfb() uses the legacy drm_mode_addfb(),
which uses bpp and depth to guess the wanted buffer format.
However, drm_client_buffer_addfb() already knows the exact buffer
format, so there is no need to convert back and forth between buffer
format and bpp/depth, and the function can just call drm_mode_addfb2()
directly instead.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4b84adfc686288714e69d0442d22f1259ff74903.1697379891.git.geert@linux-m68k.org

Merge tag 'topic/vmemdup-user-array-2023-10-24-1' of git://anongit.freedesktop.org/drm/drm into drm-next

vmemdup-user-array API and changes with it.

This is just a process PR to merge the topic branch into drm-next, this contains some core kernel and drm changes.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024010905.646830-1-airlied@redhat.com

These will show up as monospace, and will get linkified as soon as
we document the macro they point to.
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230712135723.173506-1-contact@emersion.fr

Replace 'pack' with 'back'.

Fixes: c8b75bca ("drm/vc4: Add KMS support for Raspberry Pi.")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231023085929.1445594-1-dario.binacchi@amarulasolutions.com

Updates for v6.7

DP:
- use existing helpers for DPCD handling instead of open-coded functions
- set the subconnector type according to the plugged cable / dongle
  skip validity check for DP CTS EDID checksum

DPU:
- continued migration of feature flags to use core revision checks
- reworked interrupts code to use '0' as NO_IRQ, removed raw IRQ indices
  from log / trace output

gpu:
- a7xx support (a730, a740)
- fixes and additional speedbins for a635, a643

core:
- decouple msm_drv from kms to more cleanly support headless devices (like
  imx5+a2xx)

From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvzkBL2_OgyOeP_b6rVEjrNdfm8jcKzaB04HqHyT5jYwA@mail.gmail.comSigned-off-by: Dave Airlie <airlied@redhat.com>

This is needed to add the msm pr which is based on a higher base.
Signed-off-by: Dave Airlie <airlied@redhat.com>

The work items listed in the TODO file of this driver file are either
completed or dropped. The file is no more significant according
to the maintainers. Hence removing it from the sources.
Suggested-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Deepak R Varma <drv@mailo.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZTAucrOT69/tQK2o@runicha.com

We do not run 37xx VPU on non-silicon platforms any longer.
Remove deprecated code to make it cleaner.
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-7-stanislaw.gruszka@linux.intel.com

Initialize HW specific parameters only once. We do not have to do this
on every power_up (performed during initialization and on resume). Move
corresponding code to ->info_init()
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-6-stanislaw.gruszka@linux.intel.com

Introduce ivpu_jsm_msg_type_to_str() helper to print type of IPC
message. This will make reading logs and debugging IPC issues easier.
Co-developed-by: Maciej Falkowski <maciej.falkowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@intel.com>
Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-5-stanislaw.gruszka@linux.intel.com

Do not unnecessarily wake up device to read clock rate.
Return 0 as clk_rate if device is suspended.
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-4-stanislaw.gruszka@linux.intel.com