During bus off, the error count is greater than 255 and can not fit in
a u8.

Fixes: aec5fb22 ("can: kvaser_usb: Add support for Kvaser USB hydra family")
Link: https://lore.kernel.org/all/20220719143550.3681-8-mailhol.vincent@wanadoo.fr
CC: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

During bus off, the error count is greater than 255 and can not fit in
a u8.

Fixes: 0738eff1 ("can: Allwinner A10/A20 CAN Controller support - Kernel module")
Link: https://lore.kernel.org/all/20220719143550.3681-7-mailhol.vincent@wanadoo.fr
CC: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

During bus off, the error count is greater than 255 and can not fit in
a u8.

Fixes: 57e83fb9 ("can: hi311x: Add Holt HI-311x CAN driver")
Link: https://lore.kernel.org/all/20220719143550.3681-6-mailhol.vincent@wanadoo.frSigned-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

During bus off, the error count is greater than 255 and can not fit in
a u8.

alloc_can_err_skb() already sets cf to NULL if the allocation fails [1],
so the redundant cf = NULL assignment gets removed.

[1] https://elixir.bootlin.com/linux/latest/source/drivers/net/can/dev/skb.c#L187

Fixes: 0a9cdcf0 ("can: slcan: extend the protocol with CAN state info")
Link: https://lore.kernel.org/all/20220719143550.3681-5-mailhol.vincent@wanadoo.fr
CC: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

During bus off, the error count is greater than 255 and can not fit in
a u8.

Fixes: 215db185 ("can: sja1000: Consolidate and unify state change handling")
Link: https://lore.kernel.org/all/20220719143550.3681-4-mailhol.vincent@wanadoo.frSigned-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

During bus off, the error count is greater than 255 and can not fit in
a u8.

Fixes: fd115931 ("can: add Renesas R-Car CAN driver")
Link: https://lore.kernel.org/all/20220719143550.3681-3-mailhol.vincent@wanadoo.frSigned-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

During bus off, the error count is greater than 255 and can not fit in
a u8.

Fixes: 0c78ab76 ("pch_can: Add setting TEC/REC statistics processing")
Link: https://lore.kernel.org/all/20220719143550.3681-2-mailhol.vincent@wanadoo.frSigned-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Stephane Grosjean contributes a peak-usb cleanup and update series.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The CANFD-USB PCAN-USB FD interface undergoes an internal component
change that requires a slight modification of its drivers, which leads
them to dynamically use endpoint numbers provided by the interface
itself. In addition to a change in the calls to the USB functions
exported by the kernel, the detection of the USB interface dedicated
to CAN must also be modified, as some PEAK-System devices support
other interfaces than CAN.

Link: https://lore.kernel.org/all/20220719120632.26774-3-s.grosjean@peak-system.comSigned-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
[mkl: add missing cpu_to_le16() conversion]
[mkl: fix networking block comment style]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The data structure returned from the USB device contains a number
flashed by the user and not the serial number of the device.

Link: https://lore.kernel.org/all/20220719120632.26774-2-s.grosjean@peak-system.comSigned-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Mark the input prompt and data pointer as const.

Link: https://lore.kernel.org/all/20220719120632.26774-1-s.grosjean@peak-system.comSigned-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
[mkl: mark data pointer as const, too; update commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The update is compatible/pure extension of 2.x IP core version

 - new option for 2, 4, or 8 Tx buffers option during synthesis.
   The 2.x version has fixed 4 Tx buffers. 3.x version default
   is 4 as well
 - new REG_TX_COMMAND_TXT_BUFFER_COUNT provides synthesis
   choice. When read as 0 assume 2.x core with fixed 4 Tx buffers.
 - new REG_ERR_CAPT_TS_BITS field to provide most significant
   active/implemented timestamp bit. For 2.x read as zero,
   assume value 63 is such case for 64 bit counter.
 - new REG_MODE_RXBAM bit which controls automatic advance
   to next word after Rx FIFO register read. Bit is set
   to 1 by default after the core reset (REG_MODE_RST)
   and value 1 has to be preserved for the normal ctucanfd
   Linux driver operation. Even preceding driver version
   resets core and then modifies only known/required MODE
   register bits so backward and forward compatibility is
   ensured.

See complete datasheet for time-triggered and other
updated capabilities

  http://canbus.pages.fel.cvut.cz/ctucanfd_ip_core/doc/Datasheet.pdf

The fields related to ongoing Ondrej Ille's work
on fault tolerant version with parity protected buffers
and FIFOs are not included for now. Their inclusion will
be considered when design is settled and tested.

Link: https://lore.kernel.org/all/14a98ed1829121f0f3bde784f1aa533bc3cc7fe0.1658139843.git.pisa@cmp.felk.cvut.czSigned-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The comment referred to a status (warning) other than the one that was
being managed (active error).

Link: https://lore.kernel.org/all/20220716170112.2020291-1-dario.binacchi@amarulasolutions.comSigned-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

We can't call close_candev() with a spin lock held, so release the lock
before calling it. After calling close_candev(), we can update the
fields of the private `struct can_priv' without having to acquire the
lock.

Fixes: c4e54b06 ("can: slcan: use CAN network device driver API")
Link: https://lore.kernel.org/linux-kernel/Ysrf1Yc5DaRGN1WE@xsang-OptiPlex-9020/
Link: https://lore.kernel.org/all/20220715072951.859586-1-dario.binacchi@amarulasolutions.comReported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Biju Das says:

====================
Add support for RZ/N1 SJA1000 CAN controller

This patch series aims to add support for RZ/N1 SJA1000 CAN controller.

The SJA1000 CAN controller on RZ/N1 SoC has some differences compared
to others like it has no clock divider register (CDR) support and it has
no HW loopback (HW doesn't see tx messages on rx), so introduced a new
compatible 'renesas,rzn1-sja1000' to handle these differences.

v3->v4:
 * Updated bindings as per coding style used in example-schema.
 * Entire entry in properties compatible declared as enum. Also Descriptions
   do not bring any information,so removed it from compatible description.
 * Used decimal values in nxp,tx-output-mode enums.
 * Fixed indentaions in binding examples.
 * Removed clock-names from bindings, as it is single clock.
 * Optimized the code as per Vincent's suggestion.
 * Updated clock handling as per bindings.
v2->v3:
 * Added reg-io-width is a required property for technologic,sja1000 & renesas,rzn1-sja1000
 * Removed enum type from nxp,tx-output-config and updated the description
   for combination of TX0 and TX1.
 * Updated the example for technologic,sja1000
v1->v2:
 * Moved $ref: can-controller.yaml# to top along with if conditional to
  avoid multiple mapping issues with the if conditional in the subsequent
   patch.
 * Added an example for RZ/N1D SJA1000 usage.
 * Updated commit description for patch#2,#3 and #6
 * Removed the quirk macro SJA1000_NO_HW_LOOPBACK_QUIRK
 * Added prefix SJA1000_QUIRK_* for quirk macro.
 * Replaced of_device_get_match_data->device_get_match_data.
 * Added error handling on clk error path
 * Started using "devm_clk_get_optional_enabled" for clk get,prepare and enable.

Ref:
 [1] https://lore.kernel.org/linux-renesas-soc/20220701162320.102165-1-biju.das.jz@bp.renesas.com/T/#t
====================

Link: https://lore.kernel.org/all/20220710115248.190280-1-biju.das.jz@bp.renesas.com
[mkl: applying patches 1...5 only, as 6 depends
      devm_clk_get_optional_enabled(), which is not in
      net-next/master, yet]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Change the return type as void for SoC specific init function as it
always return 0.

Link: https://lore.kernel.org/all/20220710115248.190280-6-biju.das.jz@bp.renesas.comSigned-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

This patch replaces of_match_device->device_get_match_data
to get pointer to device data.

Link: https://lore.kernel.org/all/20220710115248.190280-5-biju.das.jz@bp.renesas.comSigned-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

As per Chapter 6.5.16 of the RZ/N1 Peripheral Manual, The SJA1000
CAN controller does not support Clock Divider Register compared to
the reference Philips SJA1000 device.

This patch adds a device quirk to handle this difference.

Link: https://lore.kernel.org/all/20220710115248.190280-4-biju.das.jz@bp.renesas.comSigned-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Add CAN binding documentation for Renesas RZ/N1 SoC.

The SJA1000 CAN controller on RZ/N1 SoC has some differences compared
to others like it has no clock divider register (CDR) support and it has
no HW loopback (HW doesn't see tx messages on rx), so introduced a new
compatible 'renesas,rzn1-sja1000' to handle these differences.

Link: https://lore.kernel.org/all/20220710115248.190280-3-biju.das.jz@bp.renesas.comSigned-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Convert the NXP SJA1000 CAN Controller Device Tree binding
documentation to json-schema.

Update the example to match reality.

Link: https://lore.kernel.org/all/20220710115248.190280-2-biju.das.jz@bp.renesas.comSigned-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Marc Kleine-Budde says:

====================
can: slcan: checkpatch cleanups

This is a patch series consisting of various checkpatch cleanups for
the slcan driver.
====================

Link: https://lore.kernel.org/all/20220704125954.1587880-1-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Remove braces after if() for single statement blocks, also remove else
after return() in if() block.

Link: https://lore.kernel.org/all/20220704125954.1587880-6-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

All comparison to NULL could be written "!val", convert them to make
checkpatch happy.

Link: https://lore.kernel.org/all/20220704125954.1587880-5-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Add and remove whitespace to make checkpatch happy.

Link: https://lore.kernel.org/all/20220704125954.1587880-4-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Convert the last printk(LEVEL ...) to pr_level().

Link: https://lore.kernel.org/all/20220704125954.1587880-3-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Convert all comments to network subsystem style comments.

Link: https://lore.kernel.org/all/20220704125954.1587880-2-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The snprintf() function returns the number of bytes which *would* have
been copied if there were no space. So, since this code does not check
the return value, there if the buffer was not large enough then there
would be a buffer overflow two lines later when it does:

	actual = sl->tty->ops->write(sl->tty, sl->xbuff, n);

Use scnprintf() instead because that returns the number of bytes which
were actually copied.

Fixes: 52f9ac85 ("can: slcan: allow to send commands to the adapter")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/all/YsVA9KoY/ZSvNGYk@kiliSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Tony Nguyen says:

====================
100GbE Intel Wired LAN Driver Updates 2022-07-15

This series contains updates to ice driver only.

Ani updates feature restriction for devices that don't support external
time stamping.

Zhuo Chen removes unnecessary call to pci_aer_clear_nonfatal_status().

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  ice: Remove pci_aer_clear_nonfatal_status() call
  ice: Add EXTTS feature to the feature bitmap
====================

Link: https://lore.kernel.org/r/20220715214642.2968799-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The port fields in the ethool flow structures are defined
to be __be16 types, so sparse is showing issues where these
are being passed to htons(). Fix these warnings by passing
them to be16_to_cpu() instead.

These are being used in netdev_dbg() so should only effect
anyone doing debug.

Fixes the following sparse warnings:

drivers/net/ethernet/cadence/macb_main.c:3366:9: warning: cast from restricted __be16
drivers/net/ethernet/cadence/macb_main.c:3366:9: warning: cast from restricted __be16
drivers/net/ethernet/cadence/macb_main.c:3366:9: warning: cast from restricted __be16
drivers/net/ethernet/cadence/macb_main.c:3419:25: warning: cast from restricted __be16
drivers/net/ethernet/cadence/macb_main.c:3419:25: warning: cast from restricted __be16
drivers/net/ethernet/cadence/macb_main.c:3419:25: warning: cast from restricted __be16
drivers/net/ethernet/cadence/macb_main.c:3419:25: warning: cast from restricted __be16
Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Link: https://lore.kernel.org/r/20220715173009.526126-1-ben.dooks@sifive.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Make the code look better.
Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu>
Link: https://lore.kernel.org/r/20220715103806.7108-1-maksym.glubokiy@plvision.euSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Make generic XDP processing attribute packets to their actual
queues instead of queue #0. This improves AF_XDP performance
considerably since softirq threads no longer fight over single
AF_XDP socket spinlock.
Signed-off-by: Andrey Turkin <andrey.turkin@gmail.com>
Link: https://lore.kernel.org/r/20220717022050.822766-2-andrey.turkin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jiri Pirko says:

====================
devlink: prepare mlxsw and netdevsim for locked reload

This is preparation patchset to be able to eventually make a switch and
make reload cmd to take devlink->lock as the other commands do.

This patchset is preparing 2 major users of devlink API - mlxsw and
netdevsim. The sets of functions are similar, therefore taking care of
both here.
====================

Link: https://lore.kernel.org/r/20220716110241.3390528-1-jiri@resnulli.usSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Remove locked versions of functions that are no longer used by anyone.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Prepare for devlink reload being called with devlink->lock held and
convert the netdevsim driver to use unlocked devlink API during init and
fini flows. Take devl_lock() in reload_down() and reload_up() ops in the
meantime before reload cmd is converted to take the lock itself.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add unlocked variants of devlink_region_create/destroy() functions
to be used in drivers called-in with devlink->lock held.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Prepare for devlink reload being called with devlink->lock held and
convert the mlxsw driver to use unlocked devlink API during init and
fini flows. Take devl_lock() in reload_down() and reload_up() ops in the
meantime before reload cmd is converted to take the lock itself.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add unlocked variants of devlink_dpipe*() functions to be used
in drivers called-in with devlink->lock held.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add unlocked variants of devlink_sb*() functions to be used
in drivers called-in with devlink->lock held.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add unlocked variants of devlink_resource*() functions to be used
in drivers called-in with devlink->lock held.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add unlocked variants of devl_trap*() functions to be used in drivers
called-in with devlink->lock held.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>