- 13 Sep, 2024 20 commits
-
-
Mark Bloch authored
Downstream patches will need this as we might not want to reset it when a pending rule is connected to the FTE. Signed-off-by:
Mark Bloch <mbloch@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20240911201757.1505453-6-saeed@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Moshe Shemesh authored
As preparation for HW Steering support, where the function get_root_namespace() is needed to get root FDB, make it an API function and rename it to mlx5_get_root_namespace(). Reviewed-by:
Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://patch.msgid.link/20240911201757.1505453-5-saeed@kernel.orgSigned-off-by:
-
Moshe Shemesh authored
As preparation for HW steering support in fs core level, move SW steering helper function that can be reused by HW steering to fs_cmd.h. The function mlx5_fs_cmd_is_fw_term_table() checks if a flow table is a flow steering termination table and so should be handled by FW steering. Reviewed-by:
-
Yevgeny Kliteynik authored
Fixed all the '-ret' returns in error flow of functions to 'ret', as the internal functions are already returning negative error values (e.g. -EINVAL) Signed-off-by:
-
Yevgeny Kliteynik authored
Changed all the functions comments to adhere with kernel-doc formatting. Signed-off-by:
-
Jakub Kicinski authored
Jinjie Ruan says: ==================== net: Use IRQF_NO_AUTOEN flag in request_irq() As commit cbe16f35 ("genirq: Add IRQF_NO_AUTOEN for request_irq/nmi()") said, reqeust_irq() and then disable_irq() is unsafe. IRQF_NO_AUTOEN flag can be used by drivers to request_irq(). It prevents the automatic enabling of the requested interrupt in the same safe way. With that the usage can be simplified and corrected. ==================== Link: https://patch.msgid.link/20240911094445.1922476-1-ruanjinjie@huawei.comSigned-off-by:
-
Jinjie Ruan authored
disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ. Reviewed-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
Jinjie Ruan <ruanjinjie@huawei.com> Link: https://patch.msgid.link/20240911094445.1922476-4-ruanjinjie@huawei.comSigned-off-by:
-
Jinjie Ruan authored
disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ. Fixes: bbb96dc7 ("enetc: Factor out the traffic start/stop procedures") Signed-off-by:
-
Jinjie Ruan authored
disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ. Signed-off-by:
-
Jakub Kicinski authored
Justin sent a patch to use strscpy_pad() instead of strncpy() on the name field. Simon rightly asked why the _pad() version is used, and looking closer name seems completely unused, the last code which referred to it was removed in commit 8391c4aa ("caif: Bugfixes in CAIF netdevice for close and flow control") Link: https://lore.kernel.org/20240909-strncpy-net-caif-chnl_net-c-v1-1-438eb870c155@google.comReviewed-by:
Simon Horman <horms@kernel.org> Acked-by:
Justin Stitt <justinstitt@google.com> Link: https://patch.msgid.link/20240911015228.1555779-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
The uAPI headers for IPX were deleted 3 years ago in commit 6c9b4084 ("net: Remove net/ipx.h and uapi/linux/ipx.h header files") Delete the leftover defines from libc-compat.h Link: https://patch.msgid.link/20240911002142.1508694-1-kuba@kernel.orgSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2024-09-11 We've added 12 non-merge commits during the last 16 day(s) which contain a total of 20 files changed, 228 insertions(+), 30 deletions(-). There's a minor merge conflict in drivers/net/netkit.c: 00d066a4 ("netdev_features: convert NETIF_F_LLTX to dev->lltx") d9660879 ("netkit: Disable netpoll support") The main changes are: 1) Enable bpf_dynptr_from_skb for tp_btf such that this can be used to easily parse skbs in BPF programs attached to tracepoints, from Philo Lu. 2) Add a cond_resched() point in BPF's sock_hash_free() as there have been several syzbot soft lockup reports recently, from Eric Dumazet. 3) Fix xsk_buff_can_alloc() to account for queue_empty_descs which got noticed when zero copy ice driver started to use it, from Maciej Fijalkowski. 4) Move the xdp:xdp_cpumap_kthread tracepoint before cpumap pushes skbs up via netif_receive_skb_list() to better measure latencies, from Daniel Xu. 5) Follow-up to disable netpoll support from netkit, from Daniel Borkmann. 6) Improve xsk selftests to not assume a fixed MAX_SKB_FRAGS of 17 but instead gather the actual value via /proc/sys/net/core/max_skb_frags, also from Maciej Fijalkowski. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: sock_map: Add a cond_resched() in sock_hash_free() selftests/bpf: Expand skb dynptr selftests for tp_btf bpf: Allow bpf_dynptr_from_skb() for tp_btf tcp: Use skb__nullable in trace_tcp_send_reset selftests/bpf: Add test for __nullable suffix in tp_btf bpf: Support __nullable argument suffix for tp_btf bpf, cpumap: Move xdp:xdp_cpumap_kthread tracepoint before rcv selftests/xsk: Read current MAX_SKB_FRAGS from sysctl knob xsk: Bump xsk_queue::queue_empty_descs in xp_can_alloc() tcp_bpf: Remove an unused parameter for bpf_tcp_ingress() bpf, sockmap: Correct spelling skmsg.c netkit: Disable netpoll support Signed-off-by:
-
Jakub Kicinski authored
Willem de Bruijn says: ==================== selftests/net: packetdrill: netns and two imports From: Willem de Bruijn <willemb@google.com> 1/3: run in nets, as discussed, and add missing CONFIGs 2/3: import tcp/zerocopy 3/3: import tcp/slow_start ==================== Link: https://patch.msgid.link/20240912005317.1253001-1-willemdebruijn.kernel@gmail.comSigned-off-by:
-
Willem de Bruijn authored
Same import process as previous tests. Also add CONFIG_NET_SCH_FQ to config, as one test uses that. Same test process as previous tests. Both with and without debug mode. Recording the steps once: make mrproper vng --build \ --config tools/testing/selftests/net/packetdrill/config \ --config kernel/configs/debug.config vng -v --run . --user root --cpus 4 -- \ make -C tools/testing/selftests TARGETS=net/packetdrill run_tests Link: https://github.com/linux-netdev/nipa/wiki/How-to-run-netdev-selftests-CI-style#how-to-buildSigned-off-by:Willem de Bruijn <willemb@google.com> Acked-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240912005317.1253001-4-willemdebruijn.kernel@gmail.comSigned-off-by:
-
Willem de Bruijn authored
Same as initial tests, import verbatim from github.com/google/packetdrill, aside from: - update `source ./defaults.sh` path to adjust for flat dir - add SPDX headers - remove author statements if any - drop blank lines at EOF (new) Also import set_sysctls.py, which many scripts depend on to set sysctls and then restore them later. This is no longer strictly needed for namespacified sysctl. But not all sysctls are namespacified, and doesn't hurt if they are. Signed-off-by:
-
Willem de Bruijn authored
Run packetdrill tests inside netns. They may change system settings, such as sysctl. Also expand config with a few more needed CONFIGs. Link: https://lore.kernel.org/netdev/20240910152640.429920be@kernel.org/Signed-off-by:
-
Jakub Kicinski authored
David Arinzon says: ==================== ENA driver metrics changes This patchset contains an introduction of new metrics available to ENA users. ==================== Link: https://patch.msgid.link/20240909084704.13856-1-darinzon@amazon.comSigned-off-by:
-
David Arinzon authored
ENA currently supports the following customer metrics: - `bw_in_allowance_exceeded` - `bw_out_allowance_exceeded` - `conntrack_allowance_exceeded` - `linklocal_allowance_exceeded` - `pps_allowance_exceeded` This patch adds a new metric named: `conntrack_allowance_available`. Information about these metrics is available in [1]. In addition, the interface between the driver and the device has been upgraded to allow more flexibility and expendability to additional metrics in the future. [1]: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/monitoring-network-performance-ena.html#network-performance-metricsSigned-off-by:
Ron Beider <rbeider@amazon.com> Signed-off-by:
Shahar Itzko <itzko@amazon.com> Signed-off-by:
David Arinzon <darinzon@amazon.com> Link: https://patch.msgid.link/20240909084704.13856-3-darinzon@amazon.comSigned-off-by:
-
David Arinzon authored
ENA Express metrics, called `ena_srd` are exposed to customers via `ethtool`. The metrics allow customers to check the configuration (mode), tx/rx counters as well as resource utilization. The documentation is also updated to provide a general explanation about ENA Express as well as links for further information about metrics and configurations. Signed-off-by:
Igor Chauskin <igorch@amazon.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Cross-merge networking fixes after downstream PR. No conflicts (sort of) and no adjacent changes. This merge reverts commit b3c9e65e ("net: hsr: remove seqnr_lock") from net, as it was superseded by commit 430d67bd ("net: hsr: Use the seqnr lock for frames received via interlink port.") in net-next. Signed-off-by:
-
- 12 Sep, 2024 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from netfilter. There is a recently notified BT regression with no fix yet. I do not think a fix will land in the next week. Current release - regressions: - core: tighten bad gso csum offset check in virtio_net_hdr - netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init() - eth: ice: stop calling pci_disable_device() as we use pcim - eth: fou: fix null-ptr-deref in GRO. Current release - new code bugs: - hsr: prevent NULL pointer dereference in hsr_proxy_announce() Previous releases - regressions: - hsr: remove seqnr_lock - netfilter: nft_socket: fix sk refcount leaks - mptcp: pm: fix uaf in __timer_delete_sync - phy: dp83822: fix NULL pointer dereference on DP83825 devices - eth: revert "virtio_net: rx enable premapped mode by default" - eth: octeontx2-af: Modify SMQ flush sequence to drop packets Previous releases - always broken: - eth: mlx5: fix bridge mode operations when there are no VFs - eth: igb: Always call igb_xdp_ring_update_tail() under Tx lock" * tag 'net-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits) net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init() net: tighten bad gso csum offset check in virtio_net_hdr netlink: specs: mptcp: fix port endianness net: dpaa: Pad packets to ETH_ZLEN mptcp: pm: Fix uaf in __timer_delete_sync net: libwx: fix number of Rx and Tx descriptors net: dsa: felix: ignore pending status of TAS module when it's disabled net: hsr: prevent NULL pointer dereference in hsr_proxy_announce() selftests: mptcp: include net_helper.sh file selftests: mptcp: include lib.sh file selftests: mptcp: join: restrict fullmesh endp on 1st sf netfilter: nft_socket: make cgroupsv2 matching work with namespaces netfilter: nft_socket: fix sk refcount leaks MAINTAINERS: Add ethtool pse-pd to PSE NETWORK DRIVER dt-bindings: net: tja11xx: fix the broken binding selftests: net: csum: Fix checksums for packets with non-zero padding net: phy: dp83822: Fix NULL pointer dereference on DP83825 devices virtio_net: disable premapped mode by default Revert "virtio_net: big mode skip the unmap check" Revert "virtio_net: rx remove premapped failover code" ... -
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v6.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Ilpo Järvinen: - asus-wmi: Disable OOBE that interferes with backlight control - panasonic-laptop: Two fixes to SINF array handling * tag 'platform-drivers-x86-v6.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: asus-wmi: Disable OOBE experience on Zenbook S 16 platform/x86: panasonic-laptop: Allocate 1 entry extra in the sinf array platform/x86: panasonic-laptop: Fix SINF array out of bounds accesses
-
Linus Torvalds authored
As Jann points out, PFN mappings are special, because unlike normal memory mappings, there is no lifetime information associated with the mapping - it is just a raw mapping of PFNs with no reference counting of a 'struct page'. That's all very much intentional, but it does mean that it's easy to mess up the cleanup in case of errors. Yes, a failed mmap() will always eventually clean up any partial mappings, but without any explicit lifetime in the page table mapping itself, it's very easy to do the error handling in the wrong order. In particular, it's easy to mistakenly free the physical backing store before the page tables are actually cleaned up and (temporarily) have stale dangling PTE entries. To make this situation less error-prone, just make sure that any partial pfn mapping is torn down early, before any other error handling. Reported-and-tested-by:
Jann Horn <jannh@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Simona Vetter <simona.vetter@ffwll.ch> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Lorenzo Bianconi authored
Move nf flowtable bpf initialization in nf_flow_table module load routine since nf_flow_table_bpf is part of nf_flow_table module and not nf_flow_table_inet one. This patch allows to avoid the following kernel warning running the reproducer below: $modprobe nf_flow_table_inet $rmmod nf_flow_table_inet $modprobe nf_flow_table_inet modprobe: ERROR: could not insert 'nf_flow_table_inet': Invalid argument [ 184.081501] ------------[ cut here ]------------ [ 184.081527] WARNING: CPU: 0 PID: 1362 at kernel/bpf/btf.c:8206 btf_populate_kfunc_set+0x23c/0x330 [ 184.081550] CPU: 0 UID: 0 PID: 1362 Comm: modprobe Kdump: loaded Not tainted 6.11.0-0.rc5.22.el10.x86_64 #1 [ 184.081553] Hardware name: Red Hat OpenStack Compute, BIOS 1.14.0-1.module+el8.4.0+8855+a9e237a9 04/01/2014 [ 184.081554] RIP: 0010:btf_populate_kfunc_set+0x23c/0x330 [ 184.081558] RSP: 0018:ff22cfb38071fc90 EFLAGS: 00010202 [ 184.081559] RAX: 0000000000000001 RBX: 0000000000000001 RCX: 0000000000000000 [ 184.081560] RDX: 000000000000006e RSI: ffffffff95c00000 RDI: ff13805543436350 [ 184.081561] RBP: ffffffffc0e22180 R08: ff13805543410808 R09: 000000000001ec00 [ 184.081562] R10: ff13805541c8113c R11: 0000000000000010 R12: ff13805541b83c00 [ 184.081563] R13: ff13805543410800 R14: 0000000000000001 R15: ffffffffc0e2259a [ 184.081564] FS: 00007fa436c46740(0000) GS:ff1380557ba00000(0000) knlGS:0000000000000000 [ 184.081569] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 184.081570] CR2: 000055e7b3187000 CR3: 0000000100c48003 CR4: 0000000000771ef0 [ 184.081571] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 184.081572] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 184.081572] PKRU: 55555554 [ 184.081574] Call Trace: [ 184.081575] <TASK> [ 184.081578] ? show_trace_log_lvl+0x1b0/0x2f0 [ 184.081580] ? show_trace_log_lvl+0x1b0/0x2f0 [ 184.081582] ? __register_btf_kfunc_id_set+0x199/0x200 [ 184.081585] ? btf_populate_kfunc_set+0x23c/0x330 [ 184.081586] ? __warn.cold+0x93/0xed [ 184.081590] ? btf_populate_kfunc_set+0x23c/0x330 [ 184.081592] ? report_bug+0xff/0x140 [ 184.081594] ? handle_bug+0x3a/0x70 [ 184.081596] ? exc_invalid_op+0x17/0x70 [ 184.081597] ? asm_exc_invalid_op+0x1a/0x20 [ 184.081601] ? btf_populate_kfunc_set+0x23c/0x330 [ 184.081602] __register_btf_kfunc_id_set+0x199/0x200 [ 184.081605] ? __pfx_nf_flow_inet_module_init+0x10/0x10 [nf_flow_table_inet] [ 184.081607] do_one_initcall+0x58/0x300 [ 184.081611] do_init_module+0x60/0x230 [ 184.081614] __do_sys_init_module+0x17a/0x1b0 [ 184.081617] do_syscall_64+0x7d/0x160 [ 184.081620] ? __count_memcg_events+0x58/0xf0 [ 184.081623] ? handle_mm_fault+0x234/0x350 [ 184.081626] ? do_user_addr_fault+0x347/0x640 [ 184.081630] ? clear_bhb_loop+0x25/0x80 [ 184.081633] ? clear_bhb_loop+0x25/0x80 [ 184.081634] ? clear_bhb_loop+0x25/0x80 [ 184.081637] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 184.081639] RIP: 0033:0x7fa43652e4ce [ 184.081647] RSP: 002b:00007ffe8213be18 EFLAGS: 00000246 ORIG_RAX: 00000000000000af [ 184.081649] RAX: ffffffffffffffda RBX: 000055e7b3176c20 RCX: 00007fa43652e4ce [ 184.081650] RDX: 000055e7737fde79 RSI: 0000000000003990 RDI: 000055e7b3185380 [ 184.081651] RBP: 000055e7737fde79 R08: 0000000000000007 R09: 000055e7b3179bd0 [ 184.081651] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000040000 [ 184.081652] R13: 000055e7b3176fa0 R14: 0000000000000000 R15: 000055e7b3179b80 Fixes: 391bb659 ("netfilter: Add bpf_xdp_flow_lookup kfunc") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Acked-by:
Florian Westphal <fw@strlen.de> Acked-by:
Pablo Neira Ayuso <pablo@netfilter.org> Link: https://patch.msgid.link/20240911-nf-flowtable-bpf-modprob-fix-v1-1-f9fc075aafc3@kernel.orgSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following batch contains two fixes from Florian Westphal: Patch #1 fixes a sk refcount leak in nft_socket on mismatch. Patch #2 fixes cgroupsv2 matching from containers due to incorrect level in subtree. netfilter pull request 24-09-12 * tag 'nf-24-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_socket: make cgroupsv2 matching work with namespaces netfilter: nft_socket: fix sk refcount leaks ==================== Link: https://patch.msgid.link/20240911222520.3606-1-pablo@netfilter.orgSigned-off-by:
-
Jakub Kicinski authored
Parthiban Veerasooran says: ==================== Add support for OPEN Alliance 10BASE-T1x MACPHY Serial Interface This patch series contain the below updates, - Adds support for OPEN Alliance 10BASE-T1x MACPHY Serial Interface in the net/ethernet/oa_tc6.c. Link to the spec: ----------------- https://opensig.org/download/document/OPEN_Alliance_10BASET1x_MAC-PHY_Serial_Interface_V1.1.pdf - Adds driver support for Microchip LAN8650/1 Rev.B1 10BASE-T1S MACPHY Ethernet driver in the net/ethernet/microchip/lan865x/lan865x.c. Link to the product: -------------------- https://www.microchip.com/en-us/product/lan8650 Testing Details: ---------------- The driver performance was tested using iperf3 in the below two setups separately. Setup 1: -------- Node 0 - Raspberry Pi 4 with LAN8650 MAC-PHY Node 1 - Raspberry Pi 4 with EVB-LAN8670-USB USB Stick Setup 2: -------- Node 0 - SAMA7G54-EK with LAN8650 MAC-PHY Node 1 - Raspberry Pi 4 with EVB-LAN8670-USB USB Stick Achieved maximum of 9.4 Mbps. Some systems like Raspberry Pi 4 need performance mode enabled to get the proper clock speed for SPI. Refer below link for more details. https://github.com/raspberrypi/linux/issues/3381#issuecomment-1144723750 ==================== Link: https://patch.msgid.link/20240909082514.262942-1-Parthiban.Veerasooran@microchip.comSigned-off-by:
-
Parthiban Veerasooran authored
The LAN8650/1 combines a Media Access Controller (MAC) and an Ethernet PHY to enable 10BASE-T1S networks. The Ethernet Media Access Controller (MAC) module implements a 10 Mbps half duplex Ethernet MAC, compatible with the IEEE 802.3 standard and a 10BASE-T1S physical layer transceiver integrated into the LAN8650/1. The communication between the Host and the MAC-PHY is specified in the OPEN Alliance 10BASE-T1x MACPHY Serial Interface (TC6). Reviewed-by:
Conor Dooley <conor.dooley@microchip.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com> Link: https://patch.msgid.link/20240909082514.262942-15-Parthiban.Veerasooran@microchip.comSigned-off-by:
-
Parthiban Veerasooran authored
The LAN8650/1 is designed to conform to the OPEN Alliance 10BASE-T1x MAC-PHY Serial Interface specification, Version 1.1. The IEEE Clause 4 MAC integration provides the low pin count standard SPI interface to any microcontroller therefore providing Ethernet functionality without requiring MAC integration within the microcontroller. The LAN8650/1 operates as an SPI client supporting SCLK clock rates up to a maximum of 25 MHz. This SPI interface supports the transfer of both data (Ethernet frames) and control (register access). By default, the chunk data payload is 64 bytes in size. The Ethernet Media Access Controller (MAC) module implements a 10 Mbps half duplex Ethernet MAC, compatible with the IEEE 802.3 standard. 10BASE-T1S physical layer transceiver integrated is into the LAN8650/1. The PHY and MAC are connected via an internal Media Independent Interface (MII). Reviewed-by:
-
Parthiban Veerasooran authored
Zero align receive frame feature can be enabled to align all receive ethernet frames data to start at the beginning of any receive data chunk payload with a start word offset (SWO) of zero. Receive frames may begin anywhere within the receive data chunk payload when this feature is not enabled. Reviewed-by:
-
Parthiban Veerasooran authored
The MAC-PHY interrupt is asserted when the following conditions are met. Receive chunks available - This interrupt is asserted when the previous data footer had no receive data chunks available and once the receive data chunks become available for reading. On reception of the first data header this interrupt will be deasserted. Transmit chunk credits available - This interrupt is asserted when the previous data footer indicated no transmit credits available and once the transmit credits become available for transmitting transmit data chunks. On reception of the first data header this interrupt will be deasserted. Extended status event - This interrupt is asserted when the previous data footer indicated no extended status and once the extended event become available. In this case the host should read status #0 register to know the corresponding error/event. On reception of the first data header this interrupt will be deasserted. Reviewed-by:
-
Parthiban Veerasooran authored
SPI rx data buffer can contain one or more receive data chunks. A receive data chunk consists a 64 bytes receive data chunk payload followed a 4 bytes data footer at the end. The data footer contains the information needed to determine the validity and location of the receive frame data within the receive data chunk payload and the host can use these information to generate ethernet frame. Initially the receive chunks available will be updated from the buffer status register and then it will be updated from the footer received on each spi data transfer. Tx data valid or empty chunks equal to the number receive chunks available will be transmitted in the MOSI to receive all the rx chunks. Additionally the receive data footer contains the below information as well. The received footer will be examined for the receive errors if any. Reviewed-by:
-
Parthiban Veerasooran authored
The transmit ethernet frame will be converted into multiple transmit data chunks. Each transmit data chunk consists of a 4 bytes header followed by a 64 bytes transmit data chunk payload. The 4 bytes data header occurs at the beginning of each transmit data chunk on MOSI. The data header contains the information needed to determine the validity and location of the transmit frame data within the data chunk payload. The number of transmit data chunks transmitted to mac-phy is limited to the number transmit credits available in the mac-phy. Initially the transmit credits will be updated from the buffer status register and then it will be updated from the footer received on each spi data transfer. The received footer will be examined for the transmit errors if any. Reviewed-by:
-
Parthiban Veerasooran authored
Enabling Configuration Synchronization bit (SYNC) in the Configuration Register #0 enables data communication in the MAC-PHY. The state of this bit is reflected in the data footer SYNC bit. Reviewed-by:
-
Parthiban Veerasooran authored
This patch adds c45 registers direct access support in Microchip's LAN865x internal PHY. OPEN Alliance 10BASE-T1x compliance MAC-PHYs will have both C22 and C45 registers space. If the PHY is discovered via C22 bus protocol it assumes it uses C22 protocol and always uses C22 registers indirect access to access C45 registers. This is because, we don't have a clean separation between C22/C45 register space and C22/C45 MDIO bus protocols. Resulting, PHY C45 registers direct access can't be used which can save multiple SPI bus access. To support this feature, set .read_mmd/.write_mmd in the PHY driver to call .read_c45/.write_c45 in the OPEN Alliance framework drivers/net/ethernet/oa_tc6.c Reviewed-by:
-
Parthiban Veerasooran authored
Internal PHY is initialized as per the PHY register capability supported by the MAC-PHY. Direct PHY Register Access Capability indicates if PHY registers are directly accessible within the SPI register memory space. Indirect PHY Register Access Capability indicates if PHY registers are indirectly accessible through the MDIO/MDC registers MDIOACCn defined in OPEN Alliance specification. Currently the direct register access is only supported. Reviewed-by:
-
Parthiban Veerasooran authored
This will unmask the following error interrupts from the MAC-PHY. tx protocol error rx buffer overflow error loss of framing error header error The MAC-PHY will signal an error by setting the EXST bit in the receive data footer which will then allow the host to read the STATUS0 register to find the source of the error. Reviewed-by:
-
Parthiban Veerasooran authored
Reset complete bit is set when the MAC-PHY reset completes and ready for configuration. Additionally reset complete bit in the STS0 register has to be written by one upon reset complete to clear the interrupt. Reviewed-by:
-
Parthiban Veerasooran authored
Implement register read operation according to the control communication specified in the OPEN Alliance 10BASE-T1x MACPHY Serial Interface document. Control read commands are used by the SPI host to read registers within the MAC-PHY. Each control read commands are composed of a 32 bits control command header. The MAC-PHY ignores all data from the SPI host following the control header for the remainder of the control read command. Control read commands can read either a single register or multiple consecutive registers. When multiple consecutive registers are read, the address is automatically post-incremented by the MAC-PHY. Reading any unimplemented or undefined registers shall return zero. Reviewed-by:
-
Parthiban Veerasooran authored
Implement register write operation according to the control communication specified in the OPEN Alliance 10BASE-T1x MACPHY Serial Interface document. Control write commands are used by the SPI host to write registers within the MAC-PHY. Each control write commands are composed of a 32 bits control command header followed by register write data. The MAC-PHY ignores the final 32 bits of data from the SPI host at the end of the control write command. The write command and data is also echoed from the MAC-PHY back to the SPI host to enable the SPI host to identify which register write failed in the case of any bus errors. Control write commands can write either a single register or multiple consecutive registers. When multiple consecutive registers are written, the address is automatically post-incremented by the MAC-PHY. Writing to any unimplemented or undefined registers shall be ignored and yield no effect. Reviewed-by:
-
Parthiban Veerasooran authored
The IEEE 802.3cg project defines two 10 Mbit/s PHYs operating over a single pair of conductors. The 10BASE-T1L (Clause 146) is a long reach PHY supporting full duplex point-to-point operation over 1 km of single balanced pair of conductors. The 10BASE-T1S (Clause 147) is a short reach PHY supporting full / half duplex point-to-point operation over 15 m of single balanced pair of conductors, or half duplex multidrop bus operation over 25 m of single balanced pair of conductors. Furthermore, the IEEE 802.3cg project defines the new Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (Clause 148) meant to provide improved determinism to the CSMA/CD media access method. PLCA works in conjunction with the 10BASE-T1S PHY operating in multidrop mode. The aforementioned PHYs are intended to cover the low-speed / low-cost applications in industrial and automotive environment. The large number of pins (16) required by the MII interface, which is specified by the IEEE 802.3 in Clause 22, is one of the major cost factors that need to be addressed to fulfil this objective. The MAC-PHY solution integrates an IEEE Clause 4 MAC and a 10BASE-T1x PHY exposing a low pin count Serial Peripheral Interface (SPI) to the host microcontroller. This also enables the addition of Ethernet functionality to existing low-end microcontrollers which do not integrate a MAC controller. Reviewed-by:
-
