Add a const mtk_pcm_constraints_data struct array with all of the
(again, constant) constraints for all of the supported usecases,
remove the duplicated functions and call mtk_soundcard_startup()
instead in all of the .startup() callbacks.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-10-angelogioacchino.delregno@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add a const mtk_pcm_constraints_data struct array with all of the
(again, constant) constraints for all of the supported usecases,
remove the duplicated functions and call mtk_soundcard_startup()
instead in all of the .startup() callbacks.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-9-angelogioacchino.delregno@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

MediaTek platforms are typically setting PCM rate and channels
constraints for playback, capture and HDMI/DisplayPort playback:
commonize the startup callback by adding the PCM constraints data
to the mtk_platform_card_data structure and by reusing the common
mtk_soundcard_startup() function for all of them by getting back
the parameters from the aforementioned struct.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-8-angelogioacchino.delregno@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add mtk_soundcard_pdata platform data for the MediaTek common sound card
probe mechanism, including a driver/soc-specific probe extension (used
for bits that cannot be commonized  hence specific to this driver), and
change the probe function to mtk_soundcard_common_probe.

This is also adding the possibility of specifying the links and routing
with the audio-routing property and (x)-dai-link nodes in device trees
to stop hardcoding machine specific links in the card driver assupported
by the common probe function, but support for legacy device trees is
retained with a legacy_probe function, which is used only in case the
new properties are not found.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-7-angelogioacchino.delregno@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add mtk_soundcard_pdata platform data for the MediaTek common sound card
probe mechanism, including a driver/soc-specific probe extension (used
for bits that cannot be commonized  hence specific to this driver), and
change the probe function to mtk_soundcard_common_probe.

This is also adding the possibility of specifying the links and routing
with the audio-routing property and (x)-dai-link nodes in device trees
to stop hardcoding machine specific links in the card driver assupported
by the common probe function, but support for legacy device trees is
retained with a legacy_probe function, which is used only in case the
new properties are not found.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-6-angelogioacchino.delregno@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add mtk_soundcard_pdata platform data for the MediaTek common sound card
probe mechanism, including a driver/soc-specific probe extension (used
for bits that cannot be commonized  hence specific to this driver), and
change the probe function to mtk_soundcard_common_probe.

This is also adding the possibility of specifying the links and routing
with the audio-routing property and (x)-dai-link nodes in device trees
to stop hardcoding machine specific links in the card driver assupported
by the common probe function, but support for legacy device trees is
retained with a legacy_probe function, which is used only in case the
new properties are not found.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-5-angelogioacchino.delregno@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add mtk_soundcard_pdata platform data for the MediaTek common sound card
probe mechanism, including a driver/soc-specific probe extension (used
for bits that cannot be commonized  hence specific to this driver), and
change the probe function to mtk_soundcard_common_probe.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-4-angelogioacchino.delregno@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

Apart from a dai_link_list variable, the mtk_sof_priv currently holds
data that never gets modified during runtime.

Constify the mtk_sof_priv structure and move the SOF dai_link_list as
sof_dai_link_list in struct mtk_soc_card_data, which is a structure
that already holds the card's machine specific, runtime modified data.

This allows to safely pass the mtk_sof_priv structure as platform data
for the commonized card probe mechanism.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-3-angelogioacchino.delregno@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add a common machine soundcard driver probe function that supports both
DSP and AFE-direct usecases and also provides a hook for legacy machine
soundcard driver probe mechanisms.

Note that the hook is there because, even for legacy probe, a lot of the
actual code can still be commonized, hence still reducing duplication
for the legacy devicetree retrocompatibility cases.

This common probe function deprecates all of the inconsistent previous
probe mechanisms and aims to settle all of the MediaTek card drivers on
consistent and common devicetree properties describing wanted DAIs,
device specific DAI configuration and DAI links to codecs found on
each device/board.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-2-angelogioacchino.delregno@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

The wm8904 codec is used on an i.MX95 Toradex board.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1713165456-3494-3-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

wm8904 codec is used on i.MX95 Toradex board
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1713165456-3494-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

The I2S cores used in the H3 onwards support 32-bit sample rates.
Support these by adding a per-variant PCM format list.
Signed-off-by: John Watts <contact@jookia.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240403-sunxi_s32-v2-1-29ebf6ad590a@jookia.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Neither core nor the driver modifes 'struct regulator_ops', so it can be
const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414164703.239851-1-krzk@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The ID table already has respective entry and MODULE_DEVICE_TABLE and
creates proper alias for platform driver.  Having another MODULE_ALIAS
causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414154839.126852-2-krzk@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The ID table already has respective entry and MODULE_DEVICE_TABLE and
creates proper alias for platform driver.  Having another MODULE_ALIAS
causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414154839.126852-1-krzk@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add support microphone from Acer Aspire A315-24P and for some other similar devices with such vendor
Signed-off-by: "end.to.start" <end.to.start@mail.ru>
Link: https://lore.kernel.org/r/20240412075533.10214-1-end.to.start@mail.ruSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

More cleanups from Brent, notably the removal of the redundant
cml_rt1011_rt5682 machine driver, fixes for SoundWire platforms and
changes to sof_rt5682 to allow for 96+ sampling rates.

For the rest of this kernel cycle, we are still working on SoundWire
updates for MeteorLake (usual missing ACPI signature required for
topology selection and jack detection information). We'll provide
those patches as soon as they are reviewed/validated.

It is missing generic compatible for R-Car Gen4
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8734rrcewo.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add document for R-Car V4M (R8A779H0).
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871q7bcew5.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

There are two issues here:
1) The get_device() needs a matching put_device() on error paths.
2) The "if (!ret)" was supposed to be "if (ret)".

I re-arranged the code a bit to do the allocation before the
get_device().

Fixes: ef7784e4 ("ASoC: soc-card: Add KUnit test case for snd_soc_card_get_kcontrol")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/450dd21a-b24b-48ba-9aa4-c02e4617852f@moroto.mountainSigned-off-by: Mark Brown <broonie@kernel.org>

Document fsl,imx25-pdk-sgtl5000 to fix the following dt-schema warning:

imx25-pdk.dtb: sound: compatible: 'oneOf' conditional failed, one must be fixed:
	['fsl,imx25-pdk-sgtl5000', 'fsl,imx-audio-sgtl5000'] is too long

Fixes: 4189b542 ("ASoC: dt-bindings: fsl-asoc-card: convert to YAML")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240412121410.2948048-1-festevam@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

When 96KHz sample rate is used, and MCLK is 24.576MHz, we will need
pll_in = 24576000 and pll_out = 49152000 which is not supported by
RT5682S_PLL2. Use RT5682S_PLL1 in this case.
We don't test sample rate because RT5682S_PLL2 doesn't support 24.576MHz
input and in the MCLK = 24.576MHz, sample rate = 48KHz case, i.e.
pll_in == pll_out, PLL will not be used at all.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-13-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Delete this driver and use sof_rt5682 machine driver instead.
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-12-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

For cml boards, ALC1011 speaker amplifier is supported by machine
driver cml_rt1011_rt5682. Use same driver name for backward
compatibility with existing devices on market.
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-11-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add support for boards with four ALC1011 amplifiers. Configuration is
copied from cml_rt1011_rt5682 machine driver for backward
compatibility with existing cml devices.
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-10-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add the board config mtl_da7219_def to da7219 machine driver for all
mtl boards using default SSP port allocation (headphone codec on SSP2,
speaker amplifiers on SSP0, and BT offload on SSP1).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-9-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add a common entry in enumeration table for all da7219 boards
with/without speaker amplifier. All other rpl_da7219_def entries
become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-8-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add a common entry in enumeration table for all da7219 boards
with/without speaker amplifier. All other adl_da7219_def entries
become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-7-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch removes a confusion between speakers and amplifiers.

The existing code keeps track of the number of amplifiers and reports
it in the 'cfg-amp' component string.

The number of speakers is defined with quirks, but those quirks are
not consistently added: in the MeteorLake case, none of the supported
platforms used such a quirk, and UCM does not use the values reported
anyways. The notion of 'FOUR_SPEAKERS' is also obsolete now with some
platforms having more than four speakers.

Let's just remove all this and only report the number of amplifiers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-6-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The JD1 jack detection doesn't seem to work, use JD2.
Also use the 4 speaker configuration.

Link: https://github.com/thesofproject/linux/issues/4900Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-5-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The default JD1 does not seem to work, use JD2 instead.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-4-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

This platform has an RT711-sdca on link0 and RT1316 on link3

Closes: https://github.com/thesofproject/linux/issues/4880Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-3-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

We do need "info->amp_num++;" for the speaker dai.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-2-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Convert the imx-audio-spdif binding to YAML.

When testing dtbs_check, found below compatible strings
are not listed in document:

fsl,imx-sabreauto-spdif
fsl,imx6sx-sdb-spdif

So add them in yaml file to pass the test.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/1712830305-31350-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Variable ret is being assigned a value that is never read in a couple
of places. The variable is being re-assigned later on. The assignments
are redundant and can be removed.

Cleans up clang scan build warning:
sound/soc/codecs/tas2780.c:84:2: warning: Value stored to 'ret' is
never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://msgid.link/r/20240411083332.304887-1-colin.i.king@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Explicitly #include array_size.h for the source files that use
ARRAY_SIZE().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240410160833.20837-1-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Explicitly #include array_size.h for the ARRAY_SIZE() macro.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240410161312.22313-1-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Bastien Curutchet <bastien.curutchet@bootlin.com>:

This series aims to add some features to McBSP driver.

Convert bindings from .txt to .yaml.
Add possibility to use an external clock as sample rate generator's
input.
Add handling of new formats (TDM, S24_LE, BP_FC).
Enable the detection of unexpected frame pulses.
Set the clock free-running mode according to SND_SOC_DAIFMT_[GATED/CONT]
configuration in DAI format.
Add ti,T1-framing[tx/rx] properties in DT. They allow to set the data
delay to two bit-clock periods.

This has been tested on a platform designed off of the DAVINCI/OMAP-L138
connected to 3 daisy-chained AD7767. An external clock drives the
sample rate generator through the CLKS pin.
The hardware I have only allowed me to test acquisition side of McBSP.
It is connected to a 6 channels TDM and acts as Bit clock provider and
Frame clock consumer.

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

The beginning of the first SRAM window contains various fw registers and
additional information which can be very beneficial to read to gather
information on the current states to debug issues.

When checking whether the power-down delay should be ignored for a specific
PCM runtime, there's no need to keep going through all DAI link components
after any of them is found to be configured to use the power-down delay.

While there, fix a small typo in one of the comment blocks.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://msgid.link/r/90ae761a5b99640ece48363a7099ac2cf402bd37.1712684592.git.dsimic@manjaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>