- 20 Nov, 2019 16 commits
-
-
Takashi Iwai authored
Add the documentation about the new PCM sync_stop ops and card->sync_irq field. Link: https://lore.kernel.org/r/20191117085308.23915-9-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Many PCI and other drivers performs snd_pcm_period_elapsed() simply in its interrupt handler, so the sync_stop operation is just to call synchronize_irq(). Instead of putting this call multiple times, introduce the common card->sync_irq field. When this field is set, PCM core performs synchronize_irq() for sync-stop operation. Each driver just needs to copy its local IRQ number to card->sync_irq, and that's all we need. Link: https://lore.kernel.org/r/20191117085308.23915-8-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The standard programming model of a PCM sound driver is to process snd_pcm_period_elapsed() from an interrupt handler. When a running stream is stopped, PCM core calls the trigger-STOP PCM ops, sets the stream state to SETUP, and moves on to the next step. This is performed in an atomic manner -- this could be called from the interrupt context, after all. The problem is that, if the stream goes further and reaches to the CLOSE state immediately, the stream might be still being processed in snd_pcm_period_elapsed() in the interrupt context, and hits a NULL dereference. Such a crash happens because of the atomic operation, and we can't wait until the stream-stop finishes. For addressing such a problem, this commit adds a new PCM ops, sync_stop. This gets called at the appropriate places that need a sync with the stream-stop, i.e. at hw_params, prepare and hw_free. Some drivers already have a similar mechanism implemented locally, and we'll refactor the code later. Link: https://lore.kernel.org/r/20191117085308.23915-7-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
It should be used only in the PCM core code locally. Link: https://lore.kernel.org/r/20191117085308.23915-6-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Mention that it's completely optional now. Link: https://lore.kernel.org/r/20191117085308.23915-5-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Currently PCM ioctl ops is a mandatory field but almost all drivers simply pass snd_pcm_lib_ioctl. For simplicity, allow to set NULL in the field and call snd_pcm_lib_ioctl() as default. Link: https://lore.kernel.org/r/20191117085308.23915-4-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Update the documentation for the newly introduced managed buffer allocation mode accordingly. The old preallocation is no longer recommended. Link: https://lore.kernel.org/r/20191117085308.23915-3-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
This patch adds the support for the feature to automatically allocate and free PCM buffers, so called "managed buffer allocation" mode. It's set up via new PCM helpers, snd_pcm_set_managed_buffer() and snd_pcm_set_managed_buffer_all(), both of which correspond to the existing preallocator helpers, snd_pcm_lib_preallocate_pages() and snd_pcm_lib_preallocate_pages_for_all(). When the new helper is used, it not only performs the pre-allocation of buffers, but also it manages to call snd_pcm_lib_malloc_pages() before the PCM hw_params ops and snd_lib_pcm_free() after the PCM hw_free ops inside PCM core, respectively. This allows drivers to drop the explicit calls of the memory allocation / release functions, and it will be a good amount of code reduction in the end of this patch series. When the PCM substream is set to the managed buffer allocation mode, the managed_buffer_alloc flag is set in the substream object. Since some drivers want to know when a buffer is newly allocated or re-allocated at hw_params callback (e.g. want to set up the additional stuff for the given buffer only at allocation time), now PCM core turns on buffer_changed flag when the buffer has changed. The standard conversions to use the new API will be straightforward: - Replace snd_pcm_lib_preallocate*() calls with the corresponding snd_pcm_set_managed_buffer*(); the arguments should be unchanged - Drop superfluous snd_pcm_lib_malloc() and snd_pcm_lib_free() calls; the check of snd_pcm_lib_malloc() returns should be replaced with the check of runtime->buffer_changed flag. - If hw_params or hw_free becomes empty, drop them from PCM ops Link: https://lore.kernel.org/r/20191117085308.23915-2-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Andrew Gabbasov authored
Show and change sound card timer source with read-write info file in proc filesystem. Initial string can still be set as module parameter. The timer source string value can be changed at any time, but it is latched by PCM substream open callback (the first one for a particular cable). At this point it is actually used, that is the string is parsed, and the timer is looked up and opened. The timer source is set for a loopback card (the same as initial setting by module parameter), but every cable uses the value, current at the moment of open. Setting the value to empty string switches the timer to jiffies. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Link: https://lore.kernel.org/r/20191120174955.6410-8-andrew_gabbasov@mentor.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Timo Wischer authored
to do synchronous audio forwarding between hardware sound card and aloop devices. Such an audio route could look like the following: Sound card -> Loopback application -> ALSA loop device -> arecord In this case the loopback device should use the sound timer of the sound card. Without this patch the loopback application has to implement an adaptive sample rate converter to align the different clocks of the different ALSA devices. The used timer can be selected by referring to a sound card, its device and subdevice, when loading the module: $ modprobe snd_aloop enable=1 timer_source=[<card>[.<dev>[.<subdev>]]] <card> is the name (id) of the sound card or a card number. <dev> and <subdev> are device and subdevice numbers (defaults are 0). Empty string as a value of timer_source= parameter enables previous functionality (using jiffies timer). Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Link: https://lore.kernel.org/r/20191120174955.6410-7-andrew_gabbasov@mentor.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Timo Wischer authored
so all functions can use the same. Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Link: https://lore.kernel.org/r/20191120174955.6410-6-andrew_gabbasov@mentor.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Timo Wischer authored
This commit does not change the behaviour. It only separates the jiffies timer specific implementation from the generic part. Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Link: https://lore.kernel.org/r/20191120174955.6410-5-andrew_gabbasov@mentor.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Timo Wischer authored
This commit only refactors the implementation. It does not change the behaviour. It is required to support other timers (e.g sound timer). Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Link: https://lore.kernel.org/r/20191120174955.6410-4-andrew_gabbasov@mentor.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Timo Wischer authored
This is required for additional timer implementations which could detect errors and want to throw them. Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Link: https://lore.kernel.org/r/20191120174955.6410-3-andrew_gabbasov@mentor.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Timo Wischer authored
Describe the unit of the variables used to calculate the hw pointer depending on jiffies ticks. Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Link: https://lore.kernel.org/r/20191120174955.6410-2-andrew_gabbasov@mentor.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Kai-Heng Feng authored
Mic mute led does not work on HP ProBook 645 G4. We can use CXT_FIXUP_MUTE_LED_GPIO fixup to support it. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191120082035.18937-1-kai.heng.feng@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 19 Nov, 2019 4 commits
-
-
Nikhil Mahale authored
This patch adds DP-MST support for GK104+ NVIDIA codecs. GK104+ NVIDIA codecs support DP-MST audio. These codecs have 4 output converters and 4 pin widgets, with 4 device entries per pin widget for a total of 16 device entries. This patch moves the existing patch_nvhdmi() definition to patch_nvhdmi_legacy(), used by pre-GK104 NVIDIA codecs. Redefine patch_nvhdmi() to enable DP-MST support by setting codec->dp_mst and spec->dyn_pcm_assign. Introduce fresh logic for dynamic pcm assignment, making sure that new pcm assignments are compatible with the legacy static per_pin-pmc assignment that existed in the days before DP-MST. Signed-off-by: Nikhil Mahale <nmahale@nvidia.com> Reviewed-by: Aaron Plattner <aplattner@nvidia.com> Link: https://lore.kernel.org/r/20191119084710.29267-5-nmahale@nvidia.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Nikhil Mahale authored
This patch make it possible for non-acomp codecs to set dyn_pcm_assign/dp_mst and get DP-MST audio support. Document change notification HDA040-A for the Intel High Definition Audio 1.0a specification introduces a Device Select verb for Digital Display Pin Widgets that are multi-stream capable. This verb selects a Device Entry that is used by subsequent Pin Widget verbs. Once the Device Entry is selected, all subsequent Pin Widget verbs controlling the sink device will be directed to the selected Device Entry until the Device Select verb is updated with a new value. These Pin Widget verbs include: * Connection Select * Get Connection List Entry * Amplifier Gain/Mute * Power State * Pin Widget Control * ELD Data * DIP-Size * DIP-Index * DIP-Data * DIP-XmitCtrl * Content Protection Control * ASP Channel Mapping This patch adds calls to snd_hda_set_dev_select() to direct each of these Pin Widget control verbs to the correct Device Entry. snd_hda_get_connections() does not return per-device connection list, therefore make use snd_hda_get_raw_connections() instead of snd_hda_get_connections(). Signed-off-by: Nikhil Mahale <nmahale@nvidia.com> Reviewed-by: Aaron Plattner <aplattner@nvidia.com> Link: https://lore.kernel.org/r/20191119084710.29267-4-nmahale@nvidia.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Nikhil Mahale authored
This patch adds DP-MST jack support which will be used on NVIDIA platforms. Today, DP-MST audio is supported only if the codec has acomp support. This patch makes it possible to add DP-MST support for non-acomp codecs. For the codecs supporting DP-MST audio, each pin can contain several device entries. Each device entry is a virtual pin, described by pin_nid and dev_id in struct hdmi_spec_per_pin. For monitor hotplug event handling, non-acomp codecs enable and register jack-detection for every hdmi_spec_per_pin. This patch updates every relevant function in hda_jack.h and its implementation in hda_jack.c, to consider dev_id along with pin_nid. Changes to the HD Audio specification to support DP-MST audio are described in the Intel Document Change Notification (DCN) number HDA040-A. From HDA040-A, "For the case of multi stream capable Digital Display Pin Widget, [the Get Pin Sense verb] can be used to read a specific Device Entry state as reported in Get Device List Entry verb." This patch updates the read_pin_sense() function to take the dev_id as an argument and pass it as a parameter to the Get Pin Sense verb. Bits 15 through 20 from the Unsolicited Response for intrinsic events contain the index of the Device Entry that generated the event. This patch updates the Unsolicited Response event handlers to extract the device entry index from the response and pass it to snd_hda_jack_tbl_get_from_tag(). This patch updates snd_hda_jack_tbl_new() to take a dev_id argument and store it in the jack structure, and to make sure not to generate a different tag when called more than once for the same nid. Signed-off-by: Nikhil Mahale <nmahale@nvidia.com> Link: https://lore.kernel.org/r/20191119084710.29267-3-nmahale@nvidia.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Nikhil Mahale authored
s/snd_hda_pin_sense/snd_hda_jack_pin_sense/g This aligns the snd_hda_pin_sense function name with the names of other functions in hda_jack.h. Signed-off-by: Nikhil Mahale <nmahale@nvidia.com> Reviewed-by: Aaron Plattner <aplattner@nvidia.com> Link: https://lore.kernel.org/r/20191119084710.29267-2-nmahale@nvidia.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 15 Nov, 2019 3 commits
-
-
Kai Vehmanen authored
Remove the workarounds added in commit fa763f1b ("ALSA: hda - Force polling mode on CNL for fixing codec communication") and commit a8d7bde2 ("ALSA: hda - Force polling mode on CFL for fixing codec communication"). The workarounds are no longer needed after the more generic change done in commit 2756d914 ("ALSA: hda - Fix intermittent CORB/RIRB stall on Intel chips"). This change applies to a larger set of hardware and covers CFL and CNL as well. Similar change was already done to SOF DSP HDA driver with no regressions detected. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20191115124449.20512-4-kai.vehmanen@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Kai Vehmanen authored
Remove unnecessary comments related to pin mapping on Intel platforms. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20191115124449.20512-3-kai.vehmanen@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Kai Vehmanen authored
Semantics of port#0 differ between ICL and TGL: ICL port#0 -> never used for HDAudio ICL port#1 -> should be mapped to first pin (0x04) TGL port#0 -> typically not used, but HW has the support, so should be mapped to first pin (0x04) TGL port#1 -> should be mapped to 2nd pin (0x06) Refactor the port mapping logic to allow to take the above differences into account. Fixes issues with HDAudio on some TGL platforms. Co-developed-by: Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20191115124449.20512-2-kai.vehmanen@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 14 Nov, 2019 5 commits
-
-
Takashi Iwai authored
The unit descriptor validation may lead to a probe error when the device provides a buggy descriptor or the validator detected incorrectly. For identifying such an error and band-aiding, give a new module option, skip_validation. With this option, the driver ignores the validation errors with the hexdump of the unit descriptor, so we can check it in a bit more details. Link: https://lore.kernel.org/r/20191114165613.7422-2-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Introduce a new flag in hdmi_spec to indicate the Intel platform- specific fixups so that we can get rid of the lengthy codec ID checks. The flag is set in intel_hsw_common_init() commonly. Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20191111190937.19186-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The recently introduced unit descriptor validation had some bug for processing and extension units, it counts a bControlSize byte twice so it expected a bigger size than it should have been. This seems resulting in a probe error on a few devices. Fix the calculation for proper checks of PU and EU. Fixes: 57f87706 ("ALSA: usb-audio: More validations of descriptor units") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191114165613.7422-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The commit 60849562 ("ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk()") added NULL checks in create_yamaha_midi_quirk(), but there was an overlook. The code allows one of either injd or outjd is NULL, but the second if check made returning -ENODEV if any of them is NULL. Fix it in a proper form. Fixes: 60849562 ("ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk()") Reported-by: Pavel Machek <pavel@denx.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191113111259.24123-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 13 Nov, 2019 2 commits
-
-
paulhsia authored
If the nullity check for `substream->runtime` is outside of the lock region, it is possible to have a null runtime in the critical section if snd_pcm_detach_substream is called right before the lock. Signed-off-by: paulhsia <paulhsia@chromium.org> Link: https://lore.kernel.org/r/20191112171715.128727-2-paulhsia@chromium.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Henry Lin authored
While output urb's snd_complete_urb() is executing, calling prepare_outbound_urb() may cause endpoint stopped before prepare_outbound_urb() returns and result in next urb submitted to stopped endpoint. usb-audio driver cannot re-use it afterwards as the urb is still hold by usb stack. This change checks EP_FLAG_RUNNING flag after prepare_outbound_urb() again to let snd_complete_urb() know the endpoint already stopped and does not submit next urb. Below kind of error will be fixed: [ 213.153103] usb 1-2: timeout: still 1 active urbs on EP #1 [ 213.164121] usb 1-2: cannot submit urb 0, error -16: unknown error Signed-off-by: Henry Lin <henryl@nvidia.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191113021420.13377-1-henryl@nvidia.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 12 Nov, 2019 1 commit
-
-
Takashi Iwai authored
The code change in commit 6974f8ad ("ALSA: pci: Avoid non-standard macro usage") contained an incorrect conversion, which left the invalid pointer passed to the allocator for au88x0 driver. Fix it. Fixes: 6974f8ad ("ALSA: pci: Avoid non-standard macro usage") Link: https://lore.kernel.org/r/20191112143243.22216-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 11 Nov, 2019 6 commits
-
-
Takashi Iwai authored
A silly mistake was made while applying the fix for potential races in commit 6a34367e ("ALSA: timer: Fix possible race at assigning a timer instance"): when a slave PCM is opened and succeeds, it doesn't return but proceeds to the master timer open code instead. Plug the hole and beautify a bit. Fixes: 6a34367e ("ALSA: timer: Fix possible race at assigning a timer instance") Reported-by: syzbot+4476917c053f60112c99@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20191111173642.6093-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Kai Vehmanen authored
Apply same logic to pin setup as on previous platforms. Fixes errors in HDMI/DP playback. Tested with both snd-hda-intel and SOF drivers. Fixes: 9a11ba73 ("ALSA: hda: hdmi - add Tigerlake support") Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20191111133838.21213-1-kai.vehmanen@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Chiou, Cooper authored
Add HD Audio Device PCI ID for the Intel Cometlake-S platform Signed-off-by: Chiou, Cooper <cooper.chiou@intel.com> Link: https://lore.kernel.org/r/20191108071349.12840-1-cooper.chiou@intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Now that all users have been converted, we can drop snd_dma_pci_data() macro definition. Link: https://lore.kernel.org/r/20191108164637.1110-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Pass the device pointer from the PCI pointer directly, instead of a non-standard macro. The macro didn't give any better readability. Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The recent change (commit 08422d2c: "ALSA: memalloc: Allow NULL device for SNDRV_DMA_TYPE_CONTINOUS type") made the PCM preallocation helper accepting NULL as the device pointer for the default usage. Drop the snd_dma_continuous_data() usage that became superfluous from the callers. Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 09 Nov, 2019 3 commits
-
-
Takashi Iwai authored
A check of the return value from get_cur_mix_raw() is missing at the resolution test code in get_min_max_with_quirks(), which may leave the variable untouched, leading to a random uninitialized value, as detected by syzkaller fuzzer. Add the missing return error check for fixing that. Reported-and-tested-by: syzbot+abe1ab7afc62c6bb6377@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191109181658.30368-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The recent change (*) in the ALSA memalloc core allows us to drop the special vmalloc-specific allocation and page handling. This patch coverts to the common code. (*) 1fe7f397: ALSA: memalloc: Add vmalloc buffer allocation support 7e8edae3: ALSA: pcm: Handle special page mapping in the default mmap handler Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20191108164528.998-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The recent change (commit 08422d2c: "ALSA: memalloc: Allow NULL device for SNDRV_DMA_TYPE_CONTINUOUS type") made the PCM preallocation helper accepting NULL as the device pointer for the default usage. Drop the snd_dma_continuous_data() usage that became superfluous from the callers. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20191108164214.611-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-