- 21 Aug, 2020 40 commits
-
-
Hector Martin authored
commit 1b7ecc24 upstream. Further investigation of the L-R swap problem on the MS2109 reveals that the problem isn't that the channels are swapped, but rather that they are swapped and also out of phase by one sample. In other words, the issue is actually that the very first frame that comes from the hardware is a half-frame containing only the right channel, and after that everything becomes offset. So introduce a new quirk field to drop the very first 2 bytes that come in after the format is configured and a capture stream starts. This puts the channels in phase and in the correct order. Cc: stable@vger.kernel.org Signed-off-by:
Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20200810082400.225858-1-marcan@marcan.stSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Biggers authored
commit 270ef410 upstream. If the minix filesystem tries to map a very large logical block number to its on-disk location, block_to_path() can return offsets that are too large, causing out-of-bounds memory accesses when accessing indirect index blocks. This should be prevented by the check against the maximum file size, but this doesn't work because the maximum file size is read directly from the on-disk superblock and isn't validated itself. Fix this by validating the maximum file size at mount time. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+c7d9ec7a1a7272dd71b3@syzkaller.appspotmail.com Reported-by: syzbot+3b7b03a0c28948054fb5@syzkaller.appspotmail.com Reported-by: syzbot+6e056ee473568865f3e6@syzkaller.appspotmail.com Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Qiujun Huang <anenbupt@gmail.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200628060846.682158-4-ebiggers@kernel.orgSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Eric Biggers authored
commit facb03dd upstream. If an inode has no links, we need to mark it bad rather than allowing it to be accessed. This avoids WARNINGs in inc_nlink() and drop_nlink() when doing directory operations on a fuzzed filesystem. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+a9ac3de1b5de5fb10efc@syzkaller.appspotmail.com Reported-by: syzbot+df958cf5688a96ad3287@syzkaller.appspotmail.com Signed-off-by:
-
Eric Biggers authored
commit da27e0a0 upstream. Patch series "fs/minix: fix syzbot bugs and set s_maxbytes". This series fixes all syzbot bugs in the minix filesystem: KASAN: null-ptr-deref Write in get_block KASAN: use-after-free Write in get_block KASAN: use-after-free Read in get_block WARNING in inc_nlink KMSAN: uninit-value in get_block WARNING in drop_nlink It also fixes the minix filesystem to set s_maxbytes correctly, so that userspace sees the correct behavior when exceeding the max file size. This patch (of 6): sb_getblk() can fail, so check its return value. This fixes a NULL pointer dereference. Originally from Qiujun Huang. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+4a88b2b9dc280f47baf4@syzkaller.appspotmail.com Signed-off-by:
-
John Allen authored
commit 8a302808 upstream. Running the crypto manager self tests with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS may result in several types of errors when using the ccp-crypto driver: alg: skcipher: cbc-des3-ccp encryption failed on test vector 0; expected_error=0, actual_error=-5 ... alg: skcipher: ctr-aes-ccp decryption overran dst buffer on test vector 0 ... alg: ahash: sha224-ccp test failed (wrong result) on test vector ... These errors are the result of improper processing of scatterlists mapped for DMA. Given a scatterlist in which entries are merged as part of mapping the scatterlist for DMA, the DMA length of a merged entry will reflect the combined length of the entries that were merged. The subsequent scatterlist entry will contain DMA information for the scatterlist entry after the last merged entry, but the non-DMA information will be that of the first merged entry. The ccp driver does not take this scatterlist merging into account. To address this, add a second scatterlist pointer to track the current position in the DMA mapped representation of the scatterlist. Both the DMA representation and the original representation of the scatterlist must be tracked as while most of the driver can use just the DMA representation, scatterlist_map_and_copy() must use the original representation and expects the scatterlist pointer to be accurate to the original representation. In order to properly walk the original scatterlist, the scatterlist must be walked until the combined lengths of the entries seen is equal to the DMA length of the current entry being processed in the DMA mapped representation. Fixes: 63b94509 ("crypto: ccp - CCP device driver and interface support") Signed-off-by:
John Allen <john.allen@amd.com> Cc: stable@vger.kernel.org Acked-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Tom Rix authored
commit c06c7660 upstream. clang static analysis flags this error qat_uclo.c:297:3: warning: Attempt to free released memory [unix.Malloc] kfree(*init_tab_base); ^~~~~~~~~~~~~~~~~~~~~ When input *init_tab_base is null, the function allocates memory for the head of the list. When there is problem allocating other list elements the list is unwound and freed. Then a check is made if the list head was allocated and is also freed. Keeping track of the what may need to be freed is the variable 'tail_old'. The unwinding/freeing block is while (tail_old) { mem_init = tail_old->next; kfree(tail_old); tail_old = mem_init; } The problem is that the first element of tail_old is also what was allocated for the list head init_header = kzalloc(sizeof(*init_header), GFP_KERNEL); ... *init_tab_base = init_header; flag = 1; } tail_old = init_header; So *init_tab_base/init_header are freed twice. There is another problem. When the input *init_tab_base is non null the tail_old is calculated by traveling down the list to first non null entry. tail_old = init_header; while (tail_old->next) tail_old = tail_old->next; When the unwinding free happens, the last entry of the input list will be freed. So the freeing needs a general changed. If locally allocated the first element of tail_old is freed, else it is skipped. As a bit of cleanup, reset *init_tab_base if it came in as null. Fixes: b4b7e67c ("crypto: qat - Intel(R) QAT ucode part of fw loader") Cc: <stable@vger.kernel.org> Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
-
Hector Martin authored
commit 6e859617 upstream. This is just another Pioneer device with fixed endpoints. Input is dummy but used as feedback (it always returns silence). Cc: stable@vger.kernel.org Signed-off-by:
-
Hector Martin authored
commit 14a720dc upstream. Matching by device matches all interfaces, which breaks the video/HID portions of the device depending on module load order. Fixes: e337bf19 ("ALSA: usb-audio: add quirk for MacroSilicon MS2109") Cc: stable@vger.kernel.org Signed-off-by:
-
Mirko Dietrich authored
commit fec90088 upstream. Adds an entry for Creative USB X-Fi to the rc_config array in mixer_quirks.c to allow use of volume knob on the device. Adds support for newer X-Fi Pro card, known as "Model No. SB1095" with USB ID "041e:3263" Signed-off-by:
Mirko Dietrich <buzz@l4m1.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200806124850.20334-1-buzz@l4m1.deSigned-off-by:
-
Brant Merryman authored
commit 4387b3db upstream. Assign the .throttle and .unthrottle functions to be generic function in the driver structure to prevent data loss that can otherwise occur if the host does not enable USB throttling. Signed-off-by:
Brant Merryman <brant.merryman@silabs.com> Co-developed-by:
Phu Luu <phu.luu@silabs.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Brant Merryman authored
commit c7614ff9 upstream. CP210x hardware disables auto-RTS but leaves auto-CTS when in hardware flow control mode and UART on cp210x hardware is disabled. When re-opening the port, if auto-CTS is enabled on the cp210x, then auto-RTS must be re-enabled in the driver. Signed-off-by:
-
Miaohe Lin authored
[ Upstream commit ce787a5a ] We should fput() file iff FDPUT_FPUT is set. So we should set fput_needed accordingly. Fixes: 00e188ef ("sockfd_lookup_light(): switch to fdget^W^Waway from fget_light") Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Qingyu Li authored
[ Upstream commit 26896f01 ] When creating a raw AF_NFC socket, CAP_NET_RAW needs to be checked first. Signed-off-by:
Qingyu Li <ieatmuttonchuan@gmail.com> Signed-off-by:
-
Xie He authored
[ Upstream commit c7ca03c2 ] 1. Added a skb->len check This driver expects upper layers to include a pseudo header of 1 byte when passing down a skb for transmission. This driver will read this 1-byte header. This patch added a skb->len check before reading the header to make sure the header exists. 2. Changed to use needed_headroom instead of hard_header_len to request necessary headroom to be allocated In net/packet/af_packet.c, the function packet_snd first reserves a headroom of length (dev->hard_header_len + dev->needed_headroom). Then if the socket is a SOCK_DGRAM socket, it calls dev_hard_header, which calls dev->header_ops->create, to create the link layer header. If the socket is a SOCK_RAW socket, it "un-reserves" a headroom of length (dev->hard_header_len), and assumes the user to provide the appropriate link layer header. So according to the logic of af_packet.c, dev->hard_header_len should be the length of the header that would be created by dev->header_ops->create. However, this driver doesn't provide dev->header_ops, so logically dev->hard_header_len should be 0. So we should use dev->needed_headroom instead of dev->hard_header_len to request necessary headroom to be allocated. This change fixes kernel panic when this driver is used with AF_PACKET SOCK_RAW sockets. Call stack when panic: [ 168.399197] skbuff: skb_under_panic: text:ffffffff819d95fb len:20 put:14 head:ffff8882704c0a00 data:ffff8882704c09fd tail:0x11 end:0xc0 dev:veth0 ... [ 168.399255] Call Trace: [ 168.399259] skb_push.cold+0x14/0x24 [ 168.399262] eth_header+0x2b/0xc0 [ 168.399267] lapbeth_data_transmit+0x9a/0xb0 [lapbether] [ 168.399275] lapb_data_transmit+0x22/0x2c [lapb] [ 168.399277] lapb_transmit_buffer+0x71/0xb0 [lapb] [ 168.399279] lapb_kick+0xe3/0x1c0 [lapb] [ 168.399281] lapb_data_request+0x76/0xc0 [lapb] [ 168.399283] lapbeth_xmit+0x56/0x90 [lapbether] [ 168.399286] dev_hard_start_xmit+0x91/0x1f0 [ 168.399289] ? irq_init_percpu_irqstack+0xc0/0x100 [ 168.399291] __dev_queue_xmit+0x721/0x8e0 [ 168.399295] ? packet_parse_headers.isra.0+0xd2/0x110 [ 168.399297] dev_queue_xmit+0x10/0x20 [ 168.399298] packet_sendmsg+0xbf0/0x19b0 ...... Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: Martin Schiller <ms@dev.tdt.de> Cc: Brian Norris <briannorris@chromium.org> Signed-off-by:
Xie He <xie.he.0141@gmail.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Drew Fustini authored
[ Upstream commit f46fe79f ] This patch causes pcs_parse_pinconf() to return -ENOTSUPP when no pinctrl_map is added. The current behavior is to return 0 when !PCS_HAS_PINCONF or !nconfs. Thus pcs_parse_one_pinctrl_entry() incorrectly assumes that a map was added and sets num_maps = 2. Analysis: ========= The function pcs_parse_one_pinctrl_entry() calls pcs_parse_pinconf() if PCS_HAS_PINCONF is enabled. The function pcs_parse_pinconf() returns 0 to indicate there was no error and num_maps is then set to 2: 980 static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs, 981 struct device_node *np, 982 struct pinctrl_map **map, 983 unsigned *num_maps, 984 const char **pgnames) 985 { <snip> 1053 (*map)->type = PIN_MAP_TYPE_MUX_GROUP; 1054 (*map)->data.mux.group = np->name; 1055 (*map)->data.mux.function = np->name; 1056 1057 if (PCS_HAS_PINCONF && function) { 1058 res = pcs_parse_pinconf(pcs, np, function, map); 1059 if (res) 1060 goto free_pingroups; 1061 *num_maps = 2; 1062 } else { 1063 *num_maps = 1; 1064 } However, pcs_parse_pinconf() will also return 0 if !PCS_HAS_PINCONF or !nconfs. I believe these conditions should indicate that no map was added by returning -ENOTSUPP. Otherwise pcs_parse_one_pinctrl_entry() will set num_maps = 2 even though no maps were successfully added, as it does not reach "m++" on line 940: 895 static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np, 896 struct pcs_function *func, 897 struct pinctrl_map **map) 898 899 { 900 struct pinctrl_map *m = *map; <snip> 917 /* If pinconf isn't supported, don't parse properties in below. */ 918 if (!PCS_HAS_PINCONF) 919 return 0; 920 921 /* cacluate how much properties are supported in current node */ 922 for (i = 0; i < ARRAY_SIZE(prop2); i++) { 923 if (of_find_property(np, prop2[i].name, NULL)) 924 nconfs++; 925 } 926 for (i = 0; i < ARRAY_SIZE(prop4); i++) { 927 if (of_find_property(np, prop4[i].name, NULL)) 928 nconfs++; 929 } 930 if (!nconfs) 919 return 0; 932 933 func->conf = devm_kcalloc(pcs->dev, 934 nconfs, sizeof(struct pcs_conf_vals), 935 GFP_KERNEL); 936 if (!func->conf) 937 return -ENOMEM; 938 func->nconfs = nconfs; 939 conf = &(func->conf[0]); 940 m++; This situtation will cause a boot failure [0] on the BeagleBone Black (AM3358) when am33xx_pinmux node in arch/arm/boot/dts/am33xx-l4.dtsi has compatible = "pinconf-single" instead of "pinctrl-single". The patch fixes this issue by returning -ENOSUPP when !PCS_HAS_PINCONF or !nconfs, so that pcs_parse_one_pinctrl_entry() will know that no map was added. Logic is also added to pcs_parse_one_pinctrl_entry() to distinguish between -ENOSUPP and other errors. In the case of -ENOSUPP, num_maps is set to 1 as it is valid for pinconf to be enabled and a given pin group to not any pinconf properties. [0] https://lore.kernel.org/linux-omap/20200529175544.GA3766151@x1/ Fixes: 9dddb4df ("pinctrl: single: support generic pinconf") Signed-off-by:
Drew Fustini <drew@beagleboard.org> Acked-by:
Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20200608125143.GA2789203@x1Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Wang Hai authored
[ Upstream commit 0ffddafc ] Currently the error return path from kobject_init_and_add() is not followed by a call to kobject_put() - which means we are leaking the kobject. Set do_unreg = 1 before kobject_init_and_add() to ensure that kobject_put() can be called in its error patch. Fixes: 901195ed ("Kobject: change GFS2 to use kobject_init_and_add") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
David Teigland <teigland@redhat.com> Signed-off-by:
-
Florinel Iordache authored
[ Upstream commit 3207f715 ] Fix memory allocation for ethernet address hash table. The code was wrongly allocating an array for eth hash table which is incorrect because this is the main structure for eth hash table (struct eth_hash_t) that contains inside a number of elements. Fixes: 57ba4c9b ("fsl/fman: Add FMan MAC support") Signed-off-by:
Florinel Iordache <florinel.iordache@nxp.com> Signed-off-by:
-
Florinel Iordache authored
[ Upstream commit cc5d229a ] Add a safe check to avoid dereferencing null pointer Fixes: 57ba4c9b ("fsl/fman: Add FMan MAC support") Signed-off-by:
-
Florinel Iordache authored
[ Upstream commit cc79fd8f ] The parameter 'priority' is incorrectly forced to zero which ultimately induces logically dead code in the subsequent lines. Fixes: 57ba4c9b ("fsl/fman: Add FMan MAC support") Signed-off-by:
-
Florinel Iordache authored
[ Upstream commit 05720546 ] Check before using returned value to avoid dereferencing null pointer. Fixes: 18a6c85f ("fsl/fman: Add FMan Port Support") Signed-off-by:
-
Florinel Iordache authored
[ Upstream commit 99f47abd ] Potentially overflowing expression (ts_freq << 16 and intgr << 16) declared as type u32 (32-bit unsigned) is evaluated using 32-bit arithmetic and then used in a context that expects an expression of type u64 (64-bit unsigned) which ultimately is used as 16-bit unsigned by typecasting to u16. Fixed by using an unsigned 32-bit integer since the value is truncated anyway in the end. Fixes: 414fd46e ("fsl/fman: Add FMan support") Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 36f28f76 ] Update the size used in 'dma_free_coherent()' in order to match the one used in the corresponding 'dma_alloc_coherent()', in 'spider_net_init_chain()'. Fixes: d4ed8f8d ("Spidernet DMA coalescing") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Wang Hai authored
[ Upstream commit 20e64213 ] wl1251_event_ps_report() should not always return 0 because wl1251_ps_set_mode() may fail. Change it to return 'ret'. Fixes: f7ad1eed ("wl1251: retry power save entry") Reported-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200730073939.33704-1-wanghai38@huawei.comSigned-off-by:
-
Julian Wiedmann authored
[ Upstream commit 02472e28 ] Discard events that don't contain any entries. This shouldn't happen, but subsequent code relies on being able to use entry 0. So better be safe than accessing garbage. Fixes: b4d72c08 ("qeth: bridgeport support - basic control") Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by:
Alexandra Winter <wintera@linux.ibm.com> Signed-off-by:
-
Sandipan Das authored
[ Upstream commit dfa03fff ] The size of the CPU affinity mask must be large enough for systems with a very large number of CPUs. Otherwise, tests which try to determine the first online CPU by calling sched_getaffinity() will fail. This makes sure that the size of the allocated affinity mask is dependent on the number of CPUs as reported by get_nprocs_conf(). Fixes: 3752e453 ("selftests/powerpc: Add tests of PMU EBBs") Reported-by:
Shirisha Ganta <shiganta@in.ibm.com> Signed-off-by:
Sandipan Das <sandipan@linux.ibm.com> Reviewed-by:
Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/a408c4b8e9a23bb39b539417a21eb0ff47bb5127.1596084858.git.sandipan@linux.ibm.comSigned-off-by:
-
Harish authored
[ Upstream commit 854eb502 ] On systems with large number of cpus, test fails trying to set affinity by calling sched_setaffinity() with smaller size for affinity mask. This patch fixes it by making sure that the size of allocated affinity mask is dependent on the number of CPUs as reported by get_nprocs(). Fixes: 00b7ec5c ("selftests/powerpc: Import Anton's context_switch2 benchmark") Reported-by:
Harish <harish@linux.ibm.com> Reviewed-by:
Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by:
-
Tom Rix authored
[ Upstream commit ccf193de ] clang static analysis flags this error 88pm860x_battery.c:522:19: warning: Assigned value is garbage or undefined [core.uninitialized.Assign] info->start_soc = soc; ^ ~~~ soc is set by calling calc_soc. But calc_soc can return without setting soc. So check the return status and bail similarly to other checks in pm860x_init_battery and initialize soc to silence the warning. Fixes: a830d28b ("power_supply: Enable battery-charger for 88pm860x") Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 42a2df3e ] We have an upper bound on "maplevel" but forgot to check for negative values. Fixes: e114e473 ("Smack: Simplified Mandatory Access Control Kernel") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Casey Schaufler <casey@schaufler-ca.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit a6bd4f6d ] This is similar to commit 84e99e58 ("Smack: slab-out-of-bounds in vsscanf") where we added a bounds check on "rule". Reported-by: syzbot+a22c6092d003d6fe1122@syzkaller.appspotmail.com Fixes: f7112e6c ("Smack: allow for significantly longer Smack labels v4") Signed-off-by:
-
Finn Thain authored
[ Upstream commit edd7dd22 ] Booting Linux with a Conner CP3200 drive attached to the MESH SCSI bus results in EH measures and a panic: [ 25.499838] mesh: configured for synchronous 5 MB/s [ 25.787154] mesh: performing initial bus reset... [ 29.867115] scsi host0: MESH [ 29.929527] mesh: target 0 synchronous at 3.6 MB/s [ 29.998763] scsi 0:0:0:0: Direct-Access CONNER CP3200-200mb-3.5 4040 PQ: 0 ANSI: 1 CCS [ 31.989975] sd 0:0:0:0: [sda] 415872 512-byte logical blocks: (213 MB/203 MiB) [ 32.070975] sd 0:0:0:0: [sda] Write Protect is off [ 32.137197] sd 0:0:0:0: [sda] Mode Sense: 5b 00 00 08 [ 32.209661] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.332708] sda: [mac] sda1 sda2 sda3 [ 32.417733] sd 0:0:0:0: [sda] Attached SCSI disk ... snip ... [ 76.687067] mesh_abort((ptrval)) [ 76.743606] mesh: state at (ptrval), regs at (ptrval), dma at (ptrval) [ 76.810798] ct=6000 seq=86 bs=4017 fc= 0 exc= 0 err= 0 im= 7 int= 0 sp=85 [ 76.880720] dma stat=84e0 cmdptr=1f73d000 [ 76.941387] phase=4 msgphase=0 conn_tgt=0 data_ptr=24576 [ 77.005567] dma_st=1 dma_ct=0 n_msgout=0 [ 77.065456] target 0: req=(ptrval) goes_out=0 saved_ptr=0 [ 77.130512] mesh_abort((ptrval)) [ 77.187670] mesh: state at (ptrval), regs at (ptrval), dma at (ptrval) [ 77.255594] ct=6000 seq=86 bs=4017 fc= 0 exc= 0 err= 0 im= 7 int= 0 sp=85 [ 77.325778] dma stat=84e0 cmdptr=1f73d000 [ 77.387239] phase=4 msgphase=0 conn_tgt=0 data_ptr=24576 [ 77.453665] dma_st=1 dma_ct=0 n_msgout=0 [ 77.515900] target 0: req=(ptrval) goes_out=0 saved_ptr=0 [ 77.582902] mesh_host_reset [ 88.187083] Kernel panic - not syncing: mesh: double DMA start ! [ 88.254510] CPU: 0 PID: 358 Comm: scsi_eh_0 Not tainted 5.6.13-pmac #1 [ 88.323302] Call Trace: [ 88.378854] [e16ddc58] [c0027080] panic+0x13c/0x308 (unreliable) [ 88.446221] [e16ddcb8] [c02b2478] mesh_start.part.12+0x130/0x414 [ 88.513298] [e16ddcf8] [c02b2fc8] mesh_queue+0x54/0x70 [ 88.577097] [e16ddd18] [c02a1848] scsi_send_eh_cmnd+0x374/0x384 [ 88.643476] [e16dddc8] [c02a1938] scsi_eh_tur+0x5c/0xb8 [ 88.707878] [e16dddf8] [c02a1ab8] scsi_eh_test_devices+0x124/0x178 [ 88.775663] [e16dde28] [c02a2094] scsi_eh_ready_devs+0x588/0x8a8 [ 88.843124] [e16dde98] [c02a31d8] scsi_error_handler+0x344/0x520 [ 88.910697] [e16ddf08] [c00409c8] kthread+0xe4/0xe8 [ 88.975166] [e16ddf38] [c000f234] ret_from_kernel_thread+0x14/0x1c [ 89.044112] Rebooting in 180 seconds.. In theory, a panic can happen after a bus or host reset with dma_started flag set. Fix this by halting the DMA before reinitializing the host. Don't assume that ms->current_req is set when halt_dma() is invoked as it may not hold for bus or host reset. BTW, this particular Conner drive can be made to work by inhibiting disconnect/reselect with 'mesh.resel_targets=0'. Link: https://lore.kernel.org/r/3952bc691e150a7128b29120999b6092071b039a.1595460351.git.fthain@telegraphics.com.au Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: Paul Mackerras <paulus@ozlabs.org> Reported-and-tested-by:
Stan Johnson <userm57@yahoo.com> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit 33a06f13 ] When gadget registration fails, one should not call usb_del_gadget_udc(). Ensure this by setting gadget->udc to NULL. Also in case of a failure there is no need to disable low-level hardware, so return immiedetly instead of jumping to error_init label. This fixes the following kernel NULL ptr dereference on gadget failure (can be easily triggered with g_mass_storage without any module parameters): dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter besl=1 dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter g_np_tx_fifo_size=1024 dwc2 12480000.hsotg: EPs: 16, dedicated fifos, 7808 entries in SPRAM Mass Storage Function, version: 2009/09/11 LUN: removable file: (no medium) no file given for LUN0 g_mass_storage 12480000.hsotg: failed to start g_mass_storage: -22 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000104 pgd = (ptrval) [00000104] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.8.0-rc5 #3133 Hardware name: Samsung Exynos (Flattened Device Tree) Workqueue: events deferred_probe_work_func PC is at usb_del_gadget_udc+0x38/0xc4 LR is at __mutex_lock+0x31c/0xb18 ... Process kworker/0:1 (pid: 12, stack limit = 0x(ptrval)) Stack: (0xef121db0 to 0xef122000) ... [<c076bf3c>] (usb_del_gadget_udc) from [<c0726bec>] (dwc2_hsotg_remove+0x10/0x20) [<c0726bec>] (dwc2_hsotg_remove) from [<c0711208>] (dwc2_driver_probe+0x57c/0x69c) [<c0711208>] (dwc2_driver_probe) from [<c06247c0>] (platform_drv_probe+0x6c/0xa4) [<c06247c0>] (platform_drv_probe) from [<c0621df4>] (really_probe+0x200/0x48c) [<c0621df4>] (really_probe) from [<c06221e8>] (driver_probe_device+0x78/0x1fc) [<c06221e8>] (driver_probe_device) from [<c061fcd4>] (bus_for_each_drv+0x74/0xb8) [<c061fcd4>] (bus_for_each_drv) from [<c0621b54>] (__device_attach+0xd4/0x16c) [<c0621b54>] (__device_attach) from [<c0620c98>] (bus_probe_device+0x88/0x90) [<c0620c98>] (bus_probe_device) from [<c06211b0>] (deferred_probe_work_func+0x3c/0xd0) [<c06211b0>] (deferred_probe_work_func) from [<c0149280>] (process_one_work+0x234/0x7dc) [<c0149280>] (process_one_work) from [<c014986c>] (worker_thread+0x44/0x51c) [<c014986c>] (worker_thread) from [<c0150b1c>] (kthread+0x158/0x1a0) [<c0150b1c>] (kthread) from [<c0100114>] (ret_from_fork+0x14/0x20) Exception stack(0xef121fb0 to 0xef121ff8) ... ---[ end trace 9724c2fc7cc9c982 ]--- While fixing this also fix the double call to dwc2_lowlevel_hw_disable() if dr_mode is set to USB_DR_MODE_PERIPHERAL. In such case low-level hardware is already disabled before calling usb_add_gadget_udc(). That function correctly preserves low-level hardware state, there is no need for the second unconditional dwc2_lowlevel_hw_disable() call. Fixes: 207324a3 ("usb: dwc2: Postponed gadget registration to the udc class driver") Acked-by:
Minas Harutyunyan <hminas@synopsys.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit de37458f ] The set-led command is eight bytes long and starts with a command byte followed by six bytes of RGB data and ends with a byte encoding a frequency (see iuu_led() and iuu_rgbf_fill_buffer()). The led activity helpers had a few long-standing bugs which corrupted the command packets by inserting a second command byte and thereby offsetting the RGB data and dropping the frequency in non-xmas mode. In xmas mode, a related off-by-one error left the frequency field uninitialised. Fixes: 60a8fc01 ("USB: add iuu_phoenix driver") Reported-by:
George Spelvin <lkml@sdf.org> Link: https://lore.kernel.org/r/20200716085056.31471-1-johan@kernel.orgReviewed-by:
-
Marco Felsch authored
[ Upstream commit 7bb58b98 ] Add missing regulator_disable() as devm_action to avoid dedicated unbind() callback and fix the missing error handling. Fixes: fcbc51e5 ("staging: drm/imx: Add support for Television Encoder (TVEv2)") Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Xiongfeng Wang authored
[ Upstream commit 3167e3d3 ] When I cat ASPM parameter 'policy' by sysfs, it displays as follows. Add a newline for easy reading. Other sysfs attributes already include a newline. [root@localhost ~]# cat /sys/module/pcie_aspm/parameters/policy [default] performance powersave powersupersave [root@localhost ~]# Fixes: 7d715a6c ("PCI: add PCI Express ASPM support") Link: https://lore.kernel.org/r/1594972765-10404-1-git-send-email-wangxiongfeng2@huawei.comSigned-off-by:
Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit c4283950 ] Currently the masking of ret with 0xff and followed by a right shift of 8 bits always leaves a zero result. It appears the mask of 0xff is incorrect and should be 0xff00, but I don't have the hardware to test this. Fix this to mask the upper 8 bits before shifting. [ Not tested ] Addresses-Coverity: ("Operands don't affect result") Fixes: 8fc8598e ("Staging: Added Realtek rtl8192u driver to staging") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200716154720.1710252-1-colin.king@canonical.comSigned-off-by:
-
Milton Miller authored
[ Upstream commit a9f675f9 ] The code in vdso_cpu_init that exposes the cpu and numa node to userspace via SPRG_VDSO incorrctly masks the cpu to 12 bits. This means that any kernel running on a box with more than 4096 threads (NR_CPUS advertises a limit of of 8192 cpus) would expose userspace to two cpu contexts running at the same time with the same cpu number. Note: I'm not aware of any distro shipping a kernel with support for more than 4096 threads today, nor of any system image that currently exceeds 4096 threads. Found via code browsing. Fixes: 18ad51dd ("powerpc: Add VDSO version of getcpu") Signed-off-by:
Milton Miller <miltonm@us.ibm.com> Signed-off-by:
Anton Blanchard <anton@linux.ibm.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit e1869678 ] The length of the key comes from the network and it's a 16 bit number. It needs to be capped to prevent a buffer overflow. Fixes: 5e6e3a92 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by:
Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by:
-
John Garry authored
[ Upstream commit c87bf24c ] sdebug_max_queue should not exceed SDEBUG_CANQUEUE, otherwise crashes like this can be triggered by passing an out-of-range value: Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019 pstate: 20400009 (nzCv daif +PAN -UAO BTYPE=--) pc : schedule_resp+0x2a4/0xa70 [scsi_debug] lr : schedule_resp+0x52c/0xa70 [scsi_debug] sp : ffff800022ab36f0 x29: ffff800022ab36f0 x28: ffff0023a935a610 x27: ffff800008e0a648 x26: 0000000000000003 x25: ffff0023e84f3200 x24: 00000000003d0900 x23: 0000000000000000 x22: 0000000000000000 x21: ffff0023be60a320 x20: ffff0023be60b538 x19: ffff800008e13000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000001 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 00000000000000c1 x5 : 0000020000200000 x4 : dead0000000000ff x3 : 0000000000000200 x2 : 0000000000000200 x1 : ffff800008e13d88 x0 : 0000000000000000 Call trace: schedule_resp+0x2a4/0xa70 [scsi_debug] scsi_debug_queuecommand+0x2c4/0x9e0 [scsi_debug] scsi_queue_rq+0x698/0x840 __blk_mq_try_issue_directly+0x108/0x228 blk_mq_request_issue_directly+0x58/0x98 blk_mq_try_issue_list_directly+0x5c/0xf0 blk_mq_sched_insert_requests+0x18c/0x200 blk_mq_flush_plug_list+0x11c/0x190 blk_flush_plug_list+0xdc/0x110 blk_finish_plug+0x38/0x210 blkdev_direct_IO+0x450/0x4d8 generic_file_read_iter+0x84/0x180 blkdev_read_iter+0x3c/0x50 aio_read+0xc0/0x170 io_submit_one+0x5c8/0xc98 __arm64_sys_io_submit+0x1b0/0x258 el0_svc_common.constprop.3+0x68/0x170 do_el0_svc+0x24/0x90 el0_sync_handler+0x13c/0x1a8 el0_sync+0x158/0x180 Code: 528847e0 72a001e0 6b00003f 540018cd (3941c340) In addition, it should not be less than 1. So add checks for these, and fail the module init for those cases. [mkp: changed if condition to match error message] Link: https://lore.kernel.org/r/1594297400-24756-2-git-send-email-john.garry@huawei.com Fixes: c4837394 ("scsi_debug: add multiple queue support") Reviewed-by:
Ming Lei <ming.lei@redhat.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Laurent Pinchart authored
[ Upstream commit a6ae2fe5 ] The LG LB070WV8 panel incorrectly reports a 16 bits per component value, while the panel uses 8 bits per component. Fix it. Fixes: dd015002 ("drm/panel: simple: Add support for LG LB070WV8 800x480 7" panel") Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200711225317.28476-1-laurent.pinchart+renesas@ideasonboard.comSigned-off-by:
-
Kai-Heng Feng authored
[ Upstream commit 302a085c ] Sometimes LED won't be turned off by LED_CORE_SUSPENDRESUME flag upon system suspend. led_set_brightness_nopm() uses schedule_work() to set LED brightness. However, there's no guarantee that the scheduled work gets executed because no one flushes the work. So flush the scheduled work to make sure LED gets turned off. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Fixes: 81fe8e5b ("leds: core: Add led_set_brightness_nosleep{nopm} functions") Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
