- 23 Jun, 2009 40 commits
-
-
git://linux-arm.org/linux-2.6Linus Torvalds authored
* 'kmemleak' of git://linux-arm.org/linux-2.6: kmemleak: Do not force the slab debugging Kconfig options kmemleak: use pr_fmt
-
Hugh Dickins authored
Indeed FOLL_WRITE matches FAULT_FLAG_WRITE, matches GUP_FLAGS_WRITE, and it's tempting to devise a set of Grand Unified Paging flags; but not today. So until then, let's rely upon the compiler to spot the coincidence, "rather than have that subtle dependency and a comment for it" - as you remarked in another context yesterday. Signed-off-by:
Hugh Dickins <hugh.dickins@tiscali.co.uk> Acked-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
handle_mm_fault() is now passing fault flags rather than write_access down to hugetlb_fault(), so better recognize that in hugetlb_fault(), and in hugetlb_no_page(). Signed-off-by:
-
git://www.jni.nu/crisLinus Torvalds authored
* 'for-linus' of git://www.jni.nu/cris: CRISv10: remove redundant tests on unsigned CRISv32: irq.c - Move end brace outside #endif CRISv32: Fix potential null reference in cryptocop driver. CRISv32: Add arch optimized strcmp. CRIS: assignment/is equal confusion
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Make jack-plug notification selectable ALSA: ctxfi - Add PM support sound: seq_midi_event: fix decoding of (N)RPN events ALSA: hda - Add digital-mic support to ALC262 auto model ALSA: hda - Fix check of input source type for realtek codecs ALSA: hda - Add quirk for Sony VAIO Z21MN ALSA: hda - Get back Input Source for ALC262 toshiba-s06 model ALSA: hda - Fix unsigned comparison in patch_sigmatel.c ALSA: via82xx: add option to disable 500ms delay in snd_via82xx_codec_wait sound: fix check for return value in snd_pcm_hw_refine ALSA: ctxfi - Allow unknown PCI SSIDs ASoC: Blackfin: update the bf5xx_i2s_resume parameters ASoC: Blackfin: keep better track of SPORT configuration state
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] wdt_pci.c: remove #ifdef CONFIG_WDT_501_PCI [WATCHDOG] hpwdt: Add NMI priority option [WATCHDOG] OMAP fixes: enable clock in probe, trigger timer reload [WATCHDOG] add bcm47xx watchdog driver [WATCHDOG] Freescale STMP: watchdog driver [WATCHDOG] twl4030 watchdog driver [WATCHDOG] U300 COH 901 327 watchdog driver [WATCHDOG] Add pnx833x_wdt
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (62 commits) V4L/DVB (12131): BUGFIX: An incorrect Carrier Recovery Loop optimization table was being V4L/DVB (12130): Fix a redundant compiler warning V4L/DVB (12003): v4l2: Move bounding code outside I2C ifdef block V4L/DVB (11913): cx231xx: TRY_FMT should not actually set anything V4L/DVB (11912): em28xx: Use v4l bounding/alignment function V4L/DVB (11911): cx231xx: Use v4l bounding/alignment function V4L/DVB (11910): mt9: Use v4l bounding/alignment function V4L/DVB (11909): cx23885: Use v4l bounding/alignment function V4L/DVB (11908): w8968cf: Use v4l bounding/alignment function V4L/DVB (11907): cx88: Use v4l bounding/alignment function V4L/DVB (11906): saa7134: Use v4l bounding/alignment function V4L/DVB (11905): vivi: Use v4l bounding/alignment function V4L/DVB (11904): zoran: Use v4l bounding/alignment functiob V4L/DVB (11903): sh_mobile_ceu_camera: Use v4l bounding/alignment function V4L/DVB (11902): pxa-camera: Use v4l bounding/alignment function V4L/DVB (11901): v4l2: Create helper function for bounding and aligning images V4L/DVB (12128): v4l2: update framework documentation. V4L/DVB (12125): v4l2: add new s_config subdev ops and v4l2_i2c_new_subdev_cfg/board calls V4L/DVB (12122): pvrusb2: De-obfuscate code which handles routing schemes V4L/DVB (12121): pvrusb2: Improve handling of routing schemes ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: don't set IORDY for reset sata_fsl: Add power mgmt support [libata] PATA driver for CF interface on AT91SAM9260 SoC [libata] beautify module parameters
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: ide cmd64x: Remove serialize setting. ide: Take over as maintainer.
-
KAMEZAWA Hiroyuki authored
The isolated page is "cursor_page" not "page". This could cause LRU list corruption under memory pressure, caught by CONFIG_DEBUG_LIST. Reported-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Tested-by:
Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Catalin Marinas authored
Selecting DEBUG_SLAB or SLUB_DEBUG by the KMEMLEAK menu entry may cause issues with other dependencies (KMEMCHECK). These configuration options aren't strictly needed by kmemleak but they may increase the chances of finding leaks. This patch also updates the KMEMLEAK config entry help text. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Pekka Enberg <penberg@cs.helsinki.fi>
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Roel Kluin authored
Since dmanr is unsigned, negatives are wrapped and caught by the other test. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Acked-by:
Jesper Nilsson <jesper.nilsson@axis.com>
-
Wim Van Sebroeck authored
Change the wdt_pci.c watchdog driver so that the code is the same for both the PCI-WDT500 as the PCI-WDT501 card. The selection of the card is now being done via the module parameter: 'type' instead of the config option CONFIG_WDT_501_PCI. Signed-off-by:Wim Van Sebroeck <wim@iguana.be>
-
Tom Mingarelli authored
Add a priority option so that the user can choose if we do the NMI first or last. Signed-off-by:
Thomas Mingarelli <thomas.mingarelli@hp.com> Signed-off-by:
-
Ulrik Bech Hald authored
This patch contains two fixes: 1)In omap_wdt_probe() the watchdog is reset and disabled. This requires register access and the clks needs to be enabled temporarily 2)In omap_wdt_open() the timer register needs to be reloaded to trigger a new timer value (the default of 60s) Tested on OMAP34xx platform (Zoom1) Reviewed-by:
Kevin Hilman <khilman@ti.deeprootsystems.com> Signed-off-by:
Ulrik Bech Hald <ubh@ti.com> Signed-off-by:
-
Manu Abraham authored
loaded for a given chip version. This would cause the optimization in tuning not to be applied and thus a failed expectation, in tuning speed increment. The patch swaps the tables in use. It also fixes a possible one in a million condition where state->dev_ver implies an older Cut (Cut < 2.0, eventhough the driver doesn't attach to any Cut older than 2.0) or even negative (due to a bad I2C bus master driver) for the card combination. Thanks to Mauro Carvalho Chehab <mchehab@infradead.org> for pointing out the issue at large. Signed-off-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Manu Abraham authored
drivers/media/dvb/frontends/stv090x.c: In function ‘stv090x_optimize_carloop_short’: drivers/media/dvb/frontends/stv090x.c:2677: warning: ‘short_crl’ may be used uninitialized in this function Signed-off-by:
-
Trent Piepho authored
On Fri, 12 Jun 2009, Randy Dunlap wrote: > From: Randy Dunlap <randy.dunlap@oracle.com> > > Move v4l_bound_align_image() outside of an #ifdef CONFIG_I2C block > so that it is always built. Fixes a build error: clamp_align() should be moved as well, since it's only used by v4l_bound_align_image(). I'm attaching an alternate version that fixes this. Labeled the endif too. Reported-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
-
Trent Piepho authored
In the TRY_FMT handler the function get_scale() is called to find what the scaler hardware will produce for a requested size. The problem is that get_scale(struct cx231xx *dev, ..., unsigned int *vscale, unsigned int *hscale) saves the calculated scale values into both the pointer arguments and into dev's hscale and vscale fields. TRY_FMT shouldn't actually change anything in the device state. The code to in get_scale() that writes to dev->[hv]scale can just be deleted. In all cases when dev's fields should be modified, get_scale() was called with get_scale(dev, ..., &dev->hscale, &dev->vscale), so dev was getting updated anyway. This didn't actually cause a problem because nothing ever actually made use of the hscale and vscale fields. I changed cx231xx_resolution_set() to use those fields rather than re-calculate them with a call to get_scale(). Updating [hv]scale in cx231xx_resolution_set() isn't necessary because every call of cx231xx_resolution_set() was already preceded by a call to get_scale() or setting the [hv]scale fields, so they will be always be up-to-date w.r.t. width and height. Removing the call to get_scale() from cx231xx_resolution_set() allowed making get_scale() a static function, which is a good thing for something with such a short name. There is already another function with the same name in the em28xx driver, but that one is static. Signed-off-by:
-
Trent Piepho authored
The v4l function has a better algorithm for aligning image size. It appears that the em2800 can only scale by 50% or 100%, i.e. the only heights supported might be 240 and 480. In that case the old code would set any height other than 240 to 480. Request 240 get 240, but request 239 and then you get 480. Change it to round to the nearest supported value. Signed-off-by:
-
Trent Piepho authored
The v4l function has a better algorithm for aligning image size. Cc: Srinivasa Deevi <srinivasa.deevi@conexant.com> Signed-off-by:
-
Trent Piepho authored
The v4l function has a better algorithm for aligning image size. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Trent Piepho authored
The v4l function has a better algorithm for aligning image size. Signed-off-by:
-
Trent Piepho authored
The v4l function has a better algorithm for aligning image size. The existing code was casting pointers to u32 and to unsigned int into pointers to u16. This could mess up if someone passed in an image size greater than 65,535 and on big-endian platforms it won't work at all. The existing bounding code would shrink an image if it was too big, but returned ERANGE if it was too small. The code will not shrink or expand as necessary. Signed-off-by:
-
Trent Piepho authored
The v4l function has a better algorithm for aligning image size. Signed-off-by:
-
Trent Piepho authored
The v4l function has a better algorithm for aligning image size. Signed-off-by:
-
Trent Piepho authored
The v4l function has a better algorithm for aligning image size. Signed-off-by:
-
Trent Piepho authored
The v4l function has a better algorithm for aligning image size. Signed-off-by:
-
Trent Piepho authored
The v4l function has a better algorithm for aligning image size. Signed-off-by:
-
Trent Piepho authored
The v4l function has a better algorithm for aligning image size. For instance the old code would change 159x243 into 156x240 to meet the alignment requirements. The new function will use 160x243, which is a lot closer to what was asked for originally. Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Trent Piepho authored
Most hardware has limits on minimum and maximum image dimensions and also requirements about alignment. For example, image width must be even or a multiple of four. Some hardware has requirements that the total image size (width * height) be a multiple of some power of two. v4l_bound_align_image() will enforce min and max width and height, power of two alignment on width and height, and power of two alignment on total image size. It uses an efficient algorithm that will try to find the "closest" image size that meets the requirements. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Add a new s_config core ops call: this is called with the irq and platform data to be used to initialize the subdev. Added new v4l2_i2c_new_subdev_cfg and v4l2_i2c_new_subdev_board calls that allows you to pass these new arguments. The existing v4l2_i2c_new_subdev functions were modified to also call s_config. In the future the existing v4l2_i2c_new_subdev functions will be replaced by a single v4l2_i2c_new_subdev function similar to v4l2_i2c_new_subdev_cfg but without the irq and platform_data arguments. Signed-off-by:
-
Mike Isely authored
This change does not change any outward behavior; it merely chops down some large if-conditions with embedded assignments into something a little more maintainable for others (I of course never had a problem with this...). Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Mike Isely authored
The pvrusb2 driver has a concept of "routing scheme" which defines which physical inputs should be connected based on application's choice of logical input. The correct "routing scheme" depends on the specific device since different devices might wire up their muxes Signed-off-by: -
Mike Isely authored
Change default frequency to be US Broadcast channel 3 - with the transition to d igital the previous value has now become useless. This change is PURELY to help with my testing (I need to set some kind of default so it might as well be some thing usable). Signed-off-by:
-
Mike Isely authored
The cx25840 module's VBI initialization logic uses the current video standard as part of its internal algorithm. This therefore means that we probably need to make sure that the correct video standard has been set before initializing VBI. (Normally we would not care about VBI, but as described in an earlier changeset, VBI must be initialized correctly on the cx25840 in order for the chip's hardware scaler to operate correctly.) It's kind of messy to force the video standard to be set before initializing VBI (mainly because we can't know what the app really wants that early in the initialization process). So this patch does the next best thing: VBI is re-initialized after any point where the video standard has been set. Signed-off-by:
-
Mike Isely authored
The cx25840 module requires that its VBI initialization entry point be called in order for hardware-scaled video capture to work properly - even if we don't care about VBI. Making this behavior even more subtle is that if the capture resolution is set to 720x480 - which is the default that the pvrusb2 driver sets up - then the cx25840 bypasses the hardware scaler. Therefore this problem does not manifest itself until some other resolution, e.g. 640x480, is tried. MythTV typically defaults to 640x480 or 480x480, which means that things break whenever the driver is used with MythTV. This all has been known for a while (since at least Nov 2006), but recent changes in the pvrusb2 driver (specifically in regards to sub-device support) caused this to break again. VBI initialization must happen *after* the chip's firmware is loaded, not before. With this fix, 24xxx devices work correctly again. A related fix that is part of this changeset is that now we re-initialize VBI any time after we issue a reset to the cx25840 driver. Issuing a chip reset erases the state that the VBI setup previously did. Until the HVR-1950 came along this subtlety went unnoticed, because the pvrusb2 driver previously never issued such a reset. But with the HVR-1950 we have to do that reset in order to correctly transition from digital back to analog mode - and since the HVR-1950 always starts in digital mode (required for the DVB side to initialize correctly) then this device has never had a chance to work correctly in analog mode! Analog capture on the HVR-1950 has been broken this *ENTIRE* time. I had missed it until now because I've usually been testing at the default 720x480 resolution which does not require scaling... What fun. By re-initializing VBI after a cx25840 chip reset, correct behavior is restored. Signed-off-by:
-
Michael Krufky authored
Ensure that we're programming the tda18271 tuner with the correct IF frequencies to match the programming of the TDA10048 DVB-T demod for the HVR1200 and HVR1700 products. Signed-off-by:
Michael Krufky <mkrufky@kernellabs.com> Signed-off-by:
-
