Add flag "SOF_RT711_JD_SRC_JD2", flag "SOF_RT715_DAI_ID_FIX"
and "SOF_SDW_FOUR_SPK" to the Dell TGL-H based SKU "0A5E".
Signed-off-by: Libin Yang <libin.yang@intel.com>
Co-developed-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210125081117.814488-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The "dai_id" given into LPAIF_INTFDMA_REG(...) is already the real
DAI ID, not an index into v->dai_driver. Looking it up again seems
entirely redundant.

For IPQ806x (and SC7180 since commit 09a4f6f5
("ASoC: dt-bindings: lpass: Fix and common up lpass dai ids") this is
now often an out-of-bounds read because the indexes in the "dai_driver"
array no longer match the actual DAI ID.

Cc: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 7cb37b7b ("ASoC: qcom: Add support for lpass hdmi driver")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210125104442.135899-1-stephan@gerhold.netSigned-off-by: Mark Brown <broonie@kernel.org>

MT8192 determines the I2S clock rates according to the sampling rates.

There is only 1 set of I2S in between MT8192 and RT5682.  If playing and
capturing via RT5682 in different sampling rates, the I2S data will be
corrupted.

Adds format constraints to the corresponding DAI links to make sure the
sampling rates are symmetric.

Fixes: 18b13ff2 ("ASoC: mediatek: mt8192: add machine driver with mt6359, rt1015 and rt5682")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20210125061453.1056535-1-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

Reset (aka power off) happens when the reset gpio is made active.
Change function name to ak4458_reset to match devicetree property "reset-gpios"
Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/ce650f47-4ff6-e486-7846-cc3d033f3601@blennerhassett.gen.nzSigned-off-by: Mark Brown <broonie@kernel.org>

Clear struct snd_ctl_elem_value before calling ->put() to avoid any data
leak.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210121171644.131059-2-ribalda@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

If dobj->control is not initialized we end up in an OOPs during
skl_tplg_complete:

[   26.553358] BUG: kernel NULL pointer dereference, address:
0000000000000078
[   26.561151] #PF: supervisor read access in kernel mode
[   26.566897] #PF: error_code(0x0000) - not-present page
[   26.572642] PGD 0 P4D 0
[   26.575479] Oops: 0000 [#1] PREEMPT SMP PTI
[   26.580158] CPU: 2 PID: 2082 Comm: udevd Tainted: G         C
5.4.81 #4
[   26.588232] Hardware name: HP Soraka/Soraka, BIOS
Google_Soraka.10431.106.0 12/03/2019
[   26.597082] RIP: 0010:skl_tplg_complete+0x70/0x144 [snd_soc_skl]

Fixes: 2d744ecf ("ASoC: Intel: Skylake: Automatic DMIC format configuration according to information from NHL")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210121171644.131059-1-ribalda@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Suspending/resuming with an HDMI dongle attached leads to crashes from
an audio regmap.

 Unable to handle kernel paging request at virtual address ffffffc018068000
 Mem abort info:
   ESR = 0x96000047
   EC = 0x25: DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
 Data abort info:
   ISV = 0, ISS = 0x00000047
   CM = 0, WnR = 1
 swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000081b12000
 [ffffffc018068000] pgd=0000000275d14003, pud=0000000275d14003, pmd=000000026365d003, pte=0000000000000000
 Internal error: Oops: 96000047 [#1] PREEMPT SMP
 Call trace:
  regmap_mmio_write32le+0x2c/0x40
  regmap_mmio_write+0x48/0x6c
  _regmap_bus_reg_write+0x34/0x44
  _regmap_write+0x100/0x150
  regcache_default_sync+0xc0/0x138
  regcache_sync+0x188/0x26c
  lpass_platform_pcmops_resume+0x48/0x54 [snd_soc_lpass_platform]
  snd_soc_component_resume+0x28/0x40
  soc_resume_deferred+0x6c/0x178
  process_one_work+0x208/0x3c8
  worker_thread+0x23c/0x3e8
  kthread+0x144/0x178
  ret_from_fork+0x10/0x18
 Code: d503201f d50332bf f94002a8 8b344108 (b9000113)

I can reliably reproduce this problem by running 'tail' on the registers
file in debugfs for the hdmi regmap.

 # tail /sys/kernel/debug/regmap/62d87000.lpass-lpass_hdmi/registers
 [   84.658733] Unable to handle kernel paging request at virtual address ffffffd0128e800c

This crash happens because we're trying to read registers from the
regmap beyond the length of the mapping created by ioremap().

The number of hdmi_rdma_channels determines the size of the regmap via
this code in sound/soc/qcom/lpass-cpu.c:

  lpass_hdmi_regmap_config.max_register = LPAIF_HDMI_RDMAPER_REG(variant, variant->hdmi_rdma_channels);

According to debugfs the size of the regmap is 0x68010 but according to
the DTS file posted in [1] the size is only 0x68000 (see the first reg
property of the lpass_cpu node). Let's change the number of channels to
be 3 instead of 4 so the math works out to have a max register of
0x67010, nicely fitting inside of the region size of 0x68000.

Note: I tried to bump up the size of the register region to the next
page to include the 0x68010 register but then the tail command caused
SErrors with an async abort, implying that the register region doesn't
exist or it isn't clocked because the bus is telling us that the
register read failed. I reduce the number of channels and played audio
through the HDMI channel and it kept working so I think this is correct.

Fixes: 2ad63dc8 ("ASoC: qcom: sc7180: Add support for audio over DP")
Link: https://lore.kernel.org/r/1601448168-18396-2-git-send-email-srivasam@codeaurora.org [1]
Cc: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Cc: Srinivasa Rao <srivasam@codeaurora.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210115203329.846824-1-swboyd@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: qcom: Fix broken lpass driver" from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:

LPASS driver is partially broken on DragonBoard DB410c on 5.10 and
its totally broken on other Supported Qualcomm SoCs.

This was due to DAI ids being over written by the SoC specific header files
in the dt-bindings.

Idea of having SoC specific headers is not doable when we are dealing with
a common driver. So this patchset attempts to fix this properly by creating
a common dt-bindings header for lpass which can be updated with new entries
if required. This patchset also add an simple of_xlate function to resolve
the dai names and different SoCs might not have 1:1 mapping for the
dai_driver array with dai ids.

Changes since v1:
	- removed array indexes as suggested by Stephan G.
	- rebased to sound/for-next branch
	- collected Srinivasa tested-by tag for sc7180 platform.

Thanks,
srini

Srinivas Kandagatla (2):
  ASoC: dt-bindings: lpass: Fix and common up lpass dai ids
  ASoC: qcom: Fix broken support to MI2S TERTIARY and QUATERNARY

 include/dt-bindings/sound/apq8016-lpass.h |  7 +++----
 include/dt-bindings/sound/qcom,lpass.h    | 15 +++++++++++++++
 include/dt-bindings/sound/sc7180-lpass.h  |  6 ++----
 sound/soc/qcom/lpass-cpu.c                | 22 ++++++++++++++++++++++
 sound/soc/qcom/lpass-platform.c           | 12 ++++++++++++
 sound/soc/qcom/lpass-sc7180.c             |  9 +++------
 sound/soc/qcom/lpass.h                    |  2 +-
 7 files changed, 58 insertions(+), 15 deletions(-)
 create mode 100644 include/dt-bindings/sound/qcom,lpass.h

--
2.21.0

Merge series "ASoC: mediatek: mt8183: ignore TDM DAI link by by default" from Tzung-Bi Shih <tzungbi@google.com>:

hdmi-codec is an optional property.  The 2 patches fix DAI link binding
error when the property doesn't exist in DTS.

Tzung-Bi Shih (2):
  ASoC: mediatek: mt8183-mt6358: ignore TDM DAI link by default
  ASoC: mediatek: mt8183-da7219: ignore TDM DAI link by default

 sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c         | 5 ++++-
 sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c | 5 ++++-
 2 files changed, 8 insertions(+), 2 deletions(-)

--
2.30.0.284.gd98b1dd5eaa7-goog

Merge series "Add KUNIT tests for ASoC topology" from Amadeusz Sławiński<amadeuszx.slawinski@linux.intel.com>:

This series adds unit tests for ASoC topology.

First fix problems found when developing and running test cases and
then add tests implementation.

Tests themselves are quite simple and just call
snd_soc_tplg_component_load() with various parameters and check the
result. Tests themselves are described in more detail in commits
adding them.

Goal is to expand the amount of test cases in following patches.

Prerequisity for this patchset are 2 patches which have already been
sent:
https://lore.kernel.org/alsa-devel/20210114163602.911205-1-amadeuszx.slawinski@linux.intel.com/T/#t

Description on how typical test case itself works:

In order to load topology we need to have 3 things:
card, codec component & platform component.

In typical test case we register card and platform component and bind
to dummy codec. There are of course execeptions, when we want to
test behaviour of topology API when component or card is missing.
Note that this is bit different from typical scenario (in SOF and skylake
drivers) where card is registered by machine driver and component by
platform driver, as we register both when setting up test.

If you check the test case most of them have similar architecture of:
1.
	/* run test */
	ret = snd_soc_register_card(&kunit_comp->card);
	if (ret != 0 && ret != -EPROBE_DEFER)
		KUNIT_FAIL(test, "Failed to register card");

2.
	ret = snd_soc_component_initialize(&kunit_comp->comp, &test_component, test_dev);
	KUNIT_EXPECT_EQ(test, 0, ret);

3.
	ret = snd_soc_add_component(&kunit_comp->comp, NULL, 0);
	KUNIT_EXPECT_EQ(test, 0, ret);

Ad. 1.
First we register card, which in most tests returns -EPROBE_DEFER
(from snd_soc_bind_card()), as platform component is not yet created.
I test for both 0 and -EPROBE_DEFER, as it makes it easier to reshuffle
this code around if needed and there is one test case which does it in
different order.

Ad. 2.
Then we initialize platform component with structure pointing at proper
probe function, which calls snd_soc_tplg_component_load() with test
parameters and checks expected result.

Ad. 3.
And then in follow up we call snd_soc_add_component() which creates
platform component for us and calls snd_soc_try_rebind_card() which
if everything is bound properly calls previously set probe function.

Amadeusz Sławiński (5):
  ASoC: topology: Properly unregister DAI on removal
  Revert "ASoC: soc-devres: add devm_snd_soc_register_dai()"
  ASoC: topology: KUnit: Add KUnit tests passing various arguments to
    snd_soc_tplg_component_load
  ASoC: topology: KUnit: Add KUnit tests passing empty topology with
    variants to snd_soc_tplg_component_load
  ASoC: topology: KUnit: Add KUnit tests passing topology with PCM to
    snd_soc_tplg_component_load

 include/sound/soc.h           |   4 -
 sound/soc/Kconfig             |  17 +
 sound/soc/Makefile            |   5 +
 sound/soc/soc-devres.c        |  37 --
 sound/soc/soc-topology-test.c | 843 ++++++++++++++++++++++++++++++++++
 sound/soc/soc-topology.c      |   9 +-
 6 files changed, 870 insertions(+), 45 deletions(-)
 create mode 100644 sound/soc/soc-topology-test.c

--
2.25.1

hdmi-codec is an optional property.  Ignore to bind TDM DAI link
if the property isn't specified.

Fixes: 5bdbe977 ("ASoC: mediatek: mt8183-da7219: use hdmi-codec")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20210120092237.1553938-3-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

hdmi-codec is an optional property.  Ignore to bind TDM DAI link
if the property isn't specified.

Fixes: f2024dc5 ("ASoC: mediatek: mt8183: use hdmi-codec")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20210120092237.1553938-2-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

DAIs need to be removed when topology unload function is called (usually
done when component is being removed). We can't do this when device is
being removed, as structures we operate on when removing DAI can already
be freed.

Fixes: 6ae4902f ("ASoC: soc-topology: use devm_snd_soc_register_dai()")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210120152846.1703655-2-amadeuszx.slawinski@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The allocation uses sizeof(u32) when it should use sizeof(unsigned long)
so it leads to memory corruption later in the function when the data is
initialized.

Fixes: 5aebe7c7 ("ASoC: topology: fix endianness issues")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YAf+8QZoOv+ct526@mwandaSigned-off-by: Mark Brown <broonie@kernel.org>

BIT_WIDTH field in I2S_CTL register is two bits wide, however
recent regmap field conversion patch trimmed it down to one bit.
Fix this by correcting the bit range!

Fixes: b5022a36 ("ASoC: qcom: lpass: Use regmap_field for i2sctl and dmactl registers")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210119174700.32639-1-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Apparently, the DMI board name LNVNB161216 is also used also
for products with the digital microphones connected to the AMD's
audio bridge. Refine the DMI table - use product name identifiers
extracted from https://bugzilla.redhat.com/show_bug.cgi?id=1892115 .

The report for Lenovo Yoga Slim 7 14ARE05 (82A2) is in buglink.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211299
Cc: <stable@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210120144211.817937-1-perex@perex.czSigned-off-by: Mark Brown <broonie@kernel.org>

lpass hdmi support patch totally removed support for MI2S TERTIARY
and QUATERNARY.

One of the major issue was spotted with the design of having
separate SoC specific header files for the common lpass driver.
This design is prone to break as an when new SoC header is added
as the common DAI ids of other SoCs will be overwritten by the
new ones.

Having a common header qcom,lpass.h should fix the issue and any new
DAI ids should be added to the common header.

With this change lpass also needs a new of_xlate function to resolve
dai name.

Fixes: 7cb37b7b ("ASoC: qcom: Add support for lpass hdmi driver")
Reported-by: Jun Nie <jun.nie@linaro.org>
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivasa Rao <srivasam@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210119171527.32145-3-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Existing header file design of having separate SoC specific header files
for the common lpass driver has mutiple issues.
This design is prone to break as an when new SoC header is added
as the common DAI ids of other SoCs will be overwritten by the
new ones.

One of them surfaced by recent patch that adds support to sc7180, this
one totally broke LPASS drivers on other Qualcomm SoCs.

Before this gets worst, fix this by having a common header qcom,lpass.h.
This should fix the issue and any new DAI ids should be added to the
common header. This will be more sustainable then the existing design!

Fixes: 12fbfc4c ("ASoC: Add sc7180-lpass binding header hdmi define")
Reported-by: Jun Nie <jun.nie@linaro.org>
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivasa Rao <srivasam@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210119171527.32145-2-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The items of the 'maintainers' list are indented with three spaces.
Use the usual two spaces instead, for consistency and to silence
yamllint.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20210116013403.3490518-1-j.neuschaefer@gmx.netSigned-off-by: Mark Brown <broonie@kernel.org>

When switching between firmware types, the wrong control
can be selected when requesting control in kernel API.
Use the currently selected DSP firwmare type to select
the proper mixer control.
Signed-off-by: James Schulman <james.schulman@cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210115201105.14075-1-james.schulman@cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add full list of ASoC drivers that are maintained!
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210115165520.6023-2-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add myself as maintainer of qcom audio drivers, as Patrick
has very little time to look at the patches.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Acked-by: Patrick Lai <plai@codeaurora.org>
Link: https://lore.kernel.org/r/20210115165520.6023-1-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The earlier commit to fix runtime PM in case i915 init fails,
introduces a possibility to hit a page fault.

snd_hdac_ext_bus_device_exit() is designed to be called from
dev.release(). Calling it outside device reference counting, is
not safe and may lead to calling the device_exit() function
twice. Additionally, as part of ext_bus_device_init(), the device
is also registered with snd_hdac_device_register(). Thus before
calling device_exit(), the device must be removed from device
hierarchy first.

Fix the issue by rolling back init actions by calling
hdac_device_unregister() and then releasing device with put_device().
This matches with existing code in hdac-ext module.

To complete the fix, add handling for the case where
hda_codec_load_module() returns -ENODEV, and clean up the hdac_ext
resources also in this case.

In future work, hdac-ext interface should be extended to allow clients
more flexibility to handle the life-cycle of individual devices, beyond
just the current snd_hdac_ext_bus_device_remove(), which removes all
devices.

BugLink: https://github.com/thesofproject/linux/issues/2646Reported-by: Jaroslav Kysela <perex@perex.cz>
Fixes: 6c63c954 ("ASoC: SOF: fix a runtime pm issue in SOF when HDMI codec doesn't work")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210113150715.3992635-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

System takes a very long time to suspend after commit 215a22ed
("ALSA: hda: Refactor codec PM to use direct-complete optimization"):
[   90.065964] PM: suspend entry (s2idle)
[   90.067337] Filesystems sync: 0.001 seconds
[   90.185758] Freezing user space processes ... (elapsed 0.002 seconds) done.
[   90.188713] OOM killer disabled.
[   90.188714] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[   90.190024] printk: Suspending console(s) (use no_console_suspend to debug)
[   90.904912] intel_pch_thermal 0000:00:12.0: CPU-PCH is cool [49C], continue to suspend
[  321.262505] snd_hda_codec_realtek ehdaudio0D0: Unable to sync register 0x2b8000. -5
[  328.426919] snd_hda_codec_realtek ehdaudio0D0: Unable to sync register 0x2b8000. -5
[  329.490933] ACPI: EC: interrupt blocked

That commit keeps the codec suspended during the system suspend. However,
mute/micmute LED will clear codec's direct-complete flag by
dpm_clear_superiors_direct_complete().

This doesn't play well with SOF driver. When its runtime resume is
called for system suspend, hda_codec_jack_check() schedules
jackpoll_work which uses snd_hdac_is_power_on() to check whether codec
is suspended. Because the direct-complete path isn't taken,
pm_runtime_disable() isn't called so snd_hdac_is_power_on() returns
false and jackpoll continues to run, and snd_hda_power_up_pm() cannot
power up an already suspended codec in multiple attempts, causes the
long delay on system suspend:

if (dev->power.direct_complete) {
	if (pm_runtime_status_suspended(dev)) {
		pm_runtime_disable(dev);
		if (pm_runtime_status_suspended(dev)) {
			pm_dev_dbg(dev, state, "direct-complete ");
			goto Complete;
		}

		pm_runtime_enable(dev);
	}
	dev->power.direct_complete = false;
}

When direct-complete path is taken, snd_hdac_is_power_on() returns true
and hda_jackpoll_work() is skipped by accident. So this is still not
correct.

If we were to use snd_hdac_is_power_on() in system PM path,
pm_runtime_status_suspended() should be used instead of
pm_runtime_suspended(), otherwise pm_runtime_{enable,disable}() may
change the outcome of snd_hdac_is_power_on().

Because devices suspend in reverse order (i.e. child first), it doesn't
make much sense to resume an already suspended codec from audio
controller. So avoid the issue by making sure jackpoll isn't used in
system PM process.

Fixes: 215a22ed ("ALSA: hda: Refactor codec PM to use direct-complete optimization")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210112181128.1229827-3-kai.heng.feng@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

Modify hda_codec_jack_wake_enable() to also support disable WAKEEN.
In addition, this patch also moves the WAKEEN disablement call out of
hda_codec_jack_check() into hda_codec_jack_wake_enable().

This is a preparation for next patch.

No functional change intended.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20210112181128.1229827-2-kai.heng.feng@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

Instead of queueing jackpoll_work, runtime resume the codec to let it
use different jack detection methods based on jackpoll_interval.

This partially matches SOF driver's behavior with commit a6e7d0a4
("ALSA: hda: fix jack detection with Realtek codecs when in D3"), the
difference is SOF unconditionally resumes the codec.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20210112181128.1229827-1-kai.heng.feng@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

Changeset 81437cc3 ("Merge series "dt-bindings: stm32: convert audio dfsdm to json-schema" from Olivier Moysan <olivier.moysan@st.com>:")
removed bindings/sound/st,stm32-adfsdm.txt, as stm32-* audio
bindings are now under: bindings/iio/adc/st,stm32-*.yaml.

Update cross-references to them accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/03950bbd5cf7bac10eaaff3725e283d3ec2538c5.1610536535.git.mchehab+huawei@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge tag 'kbuild-fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Search for <ncurses.h> in the default header path of HOSTCC

 - Tweak the option order to be kind to old BSD awk

 - Remove 'kvmconfig' and 'xenconfig' shorthands

 - Fix documentation

* tag 'kbuild-fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  Documentation: kbuild: Fix section reference
  kconfig: remove 'kvmconfig' and 'xenconfig' shorthands
  lib/raid6: Let $(UNROLL) rules work with macOS userland
  kconfig: Support building mconf with vendor sysroot ncurses
  kconfig: config script: add a little user help
  MAINTAINERS: adjust GCC PLUGINS after gcc-plugin.sh removal

Pull SCSI fixes from James Bottomley:
 "This is two driver fixes (megaraid_sas and hisi_sas).

  The megaraid one is a revert of a previous revert of a cpu hotplug fix
  which exposed a bug in the block layer which has been fixed in this
  merge window.

  The hisi_sas performance enhancement comes from switching to interrupt
  managed completion queues, which depended on the addition of
  devm_platform_get_irqs_affinity() which is now upstream via the irq
  tree in the last merge window"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: hisi_sas: Expose HW queues for v2 hw
  Revert "Revert "scsi: megaraid_sas: Added support for shared host tagset for cpuhotplug""

Pull block fixes from Jens Axboe:

 - Missing CRC32 selections (Arnd)

 - Fix for a merge window regression with bdev inode init (Christoph)

 - bcache fixes

 - rnbd fixes

 - NVMe pull request from Christoph:
    - fix a race in the nvme-tcp send code (Sagi Grimberg)
    - fix a list corruption in an nvme-rdma error path (Israel Rukshin)
    - avoid a possible double fetch in nvme-pci (Lalithambika Krishnakumar)
    - add the susystem NQN quirk for a Samsung driver (Gopal Tiwari)
    - fix two compiler warnings in nvme-fcloop (James Smart)
    - don't call sleeping functions from irq context in nvme-fc (James Smart)
    - remove an unused argument (Max Gurtovoy)
    - remove unused exports (Minwoo Im)

 - Use-after-free fix for partition iteration (Ming)

 - Missing blk-mq debugfs flag annotation (John)

 - Bdev freeze regression fix (Satya)

 - blk-iocost NULL pointer deref fix (Tejun)

* tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block: (26 commits)
  bcache: set bcache device into read-only mode for BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET
  bcache: introduce BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE for large bucket
  bcache: check unsupported feature sets for bcache register
  bcache: fix typo from SUUP to SUPP in features.h
  bcache: set pdev_set_uuid before scond loop iteration
  blk-mq-debugfs: Add decode for BLK_MQ_F_TAG_HCTX_SHARED
  block/rnbd-clt: avoid module unload race with close confirmation
  block/rnbd: Adding name to the Contributors List
  block/rnbd-clt: Fix sg table use after free
  block/rnbd-srv: Fix use after free in rnbd_srv_sess_dev_force_close
  block/rnbd: Select SG_POOL for RNBD_CLIENT
  block: pre-initialize struct block_device in bdev_alloc_inode
  fs: Fix freeze_bdev()/thaw_bdev() accounting of bd_fsfreeze_sb
  nvme: remove the unused status argument from nvme_trace_bio_complete
  nvmet-rdma: Fix list_del corruption on queue establishment failure
  nvme: unexport functions with no external caller
  nvme: avoid possible double fetch in handling CQE
  nvme-tcp: Fix possible race of io_work and direct send
  nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQN
  nvme-fcloop: Fix sscanf type and list_first_entry_or_null warnings
  ...

Pull io_uring fixes from Jens Axboe:
 "A bit larger than I had hoped at this point, but it's all changes that
  will be directed towards stable anyway. In detail:

   - Fix a merge window regression on error return (Matthew)

   - Remove useless variable declaration/assignment (Ye Bin)

   - IOPOLL fixes (Pavel)

   - Exit and cancelation fixes (Pavel)

   - fasync lockdep complaint fix (Pavel)

   - Ensure SQPOLL is synchronized with creator life time (Pavel)"

* tag 'io_uring-5.11-2021-01-10' of git://git.kernel.dk/linux-block:
  io_uring: stop SQPOLL submit on creator's death
  io_uring: add warn_once for io_uring_flush()
  io_uring: inline io_uring_attempt_task_drop()
  io_uring: io_rw_reissue lockdep annotations
  io_uring: synchronise ev_posted() with waitqueues
  io_uring: dont kill fasync under completion_lock
  io_uring: trigger eventfd for IOPOLL
  io_uring: Fix return value from alloc_fixed_file_ref_node
  io_uring: Delete useless variable ‘id’ in io_prep_async_work
  io_uring: cancel more aggressively in exit_work
  io_uring: drop file refs after task cancel
  io_uring: patch up IOPOLL overflow_flush sync
  io_uring: synchronise IOPOLL on task_submit fail

Pull USB fixes from Greg KH:
 "Here are a number of small USB driver fixes for 5.11-rc3.

  Include in here are:

   - USB gadget driver fixes for reported issues

   - new usb-serial driver ids

   - dma from stack bugfixes

   - typec bugfixes

   - dwc3 bugfixes

   - xhci driver bugfixes

   - other small misc usb driver bugfixes

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits)
  usb: dwc3: gadget: Clear wait flag on dequeue
  usb: typec: Send uevent for num_altmodes update
  usb: typec: Fix copy paste error for NVIDIA alt-mode description
  usb: gadget: enable super speed plus
  kcov, usb: hide in_serving_softirq checks in __usb_hcd_giveback_urb
  usb: uas: Add PNY USB Portable SSD to unusual_uas
  usb: gadget: configfs: Preserve function ordering after bind failure
  usb: gadget: select CONFIG_CRC32
  usb: gadget: core: change the comment for usb_gadget_connect
  usb: gadget: configfs: Fix use-after-free issue with udc_name
  usb: dwc3: gadget: Restart DWC3 gadget when enabling pullup
  usb: usbip: vhci_hcd: protect shift size
  USB: usblp: fix DMA to stack
  USB: serial: iuu_phoenix: fix DMA from stack
  USB: serial: option: add LongSung M5710 module support
  USB: serial: option: add Quectel EM160R-GL
  USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug
  usb: gadget: f_uac2: reset wMaxPacketSize
  usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression
  usb: dwc3: ulpi: Replace CPU-based busyloop with Protocol-based one
  ...

Pull staging driver fixes from Greg KH:
 "Here are some small staging driver fixes for 5.11-rc3. Nothing major,
  just resolving some reported issues:

   - cleanup some remaining mentions of the ION drivers that were
     removed in 5.11-rc1

   - comedi driver bugfix

   - two error path memory leak fixes

  All have been in linux-next for a while with no reported issues"

* tag 'staging-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: ION: remove some references to CONFIG_ION
  staging: mt7621-dma: Fix a resource leak in an error handling path
  Staging: comedi: Return -EFAULT if copy_to_user() fails
  staging: spmi: hisi-spmi-controller: Fix some error handling paths

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc driver fixes for 5.11-rc3.

  The majority here are fixes for the habanalabs drivers, but also in
  here are:

   - crypto driver fix

   - pvpanic driver fix

   - updated font file

   - interconnect driver fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits)
  Fonts: font_ter16x32: Update font with new upstream Terminus release
  misc: pvpanic: Check devm_ioport_map() for NULL
  speakup: Add github repository URL and bug tracker
  MAINTAINERS: Update Georgi's email address
  crypto: asym_tpm: correct zero out potential secrets
  habanalabs: Fix memleak in hl_device_reset
  interconnect: imx8mq: Use icc_sync_state
  interconnect: imx: Remove a useless test
  interconnect: imx: Add a missing of_node_put after of_device_is_available
  interconnect: qcom: fix rpmh link failures
  habanalabs: fix order of status check
  habanalabs: register to pci shutdown callback
  habanalabs: add validation cs counter, fix misplaced counters
  habanalabs/gaudi: retry loading TPC f/w on -EINTR
  habanalabs: adjust pci controller init to new firmware
  habanalabs: update comment in hl_boot_if.h
  habanalabs/gaudi: enhance reset message
  habanalabs: full FW hard reset support
  habanalabs/gaudi: disable CGM at HW initialization
  habanalabs: Revise comment to align with mirror list name
  ...

Section 3.11 was incorrectly called 3.9, fix it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull ARC fixes from Vineet Gupta:

 - Address the 2nd boot failure due to snafu in signal handling code
   (first was generic console ttynull issue)

 - misc other fixes

* tag 'arc-5.11-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [hsdk]: Enable FPU_SAVE_RESTORE
  ARC: unbork 5.11 bootup: fix snafu in _TIF_NOTIFY_SIGNAL handling
  include/soc: remove headers for EZChip NPS
  arch/arc: add copy_user_page() to <asm/page.h> to fix build error on ARC

Pull powerpc fixes from Michael Ellerman:

 - A fix for machine check handling with VMAP stack on 32-bit.

 - A clang build fix.

Thanks to Christophe Leroy and Nathan Chancellor.

* tag 'powerpc-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: Handle .text.{hot,unlikely}.* in linker script
  powerpc/32s: Fix RTAS machine check with VMAP stack

Pull x86 fixes from Borislav Petkov:
 "As expected, fixes started trickling in after the holidays so here is
  the accumulated pile of x86 fixes for 5.11:

   - A fix for fanotify_mark() missing the conversion of x86_32 native
     syscalls which take 64-bit arguments to the compat handlers due to
     former having a general compat handler. (Brian Gerst)

   - Add a forgotten pmd page destructor call to pud_free_pmd_page()
     where a pmd page is freed. (Dan Williams)

   - Make IN/OUT insns with an u8 immediate port operand handling for
     SEV-ES guests more precise by using only the single port byte and
     not the whole s32 value of the insn decoder. (Peter Gonda)

   - Correct a straddling end range check before returning the proper
     MTRR type, when the end address is the same as top of memory.
     (Ying-Tsun Huang)

   - Change PQR_ASSOC MSR update scheme when moving a task to a resctrl
     resource group to avoid significant performance overhead with some
     resctrl workloads. (Fenghua Yu)

   - Avoid the actual task move overhead when the task is already in the
     resource group. (Fenghua Yu)"

* tag 'x86_urgent_for_v5.11_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/resctrl: Don't move a task to the same resource group
  x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR
  x86/mtrr: Correct the range check before performing MTRR type lookups
  x86/sev-es: Fix SEV-ES OUT/IN immediate opcode vc handling
  x86/mm: Fix leak of pmd ptlock
  fanotify: Fix sys_fanotify_mark() on native x86-32