Add support for the KSZ9567 7-Port Gigabit Ethernet Switch to the
ksz9477 driver. The KSZ9567 supports both SPI and I2C. Oddly the
ksz9567 is already in the device tree binding documentation.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add KSZ9477 I2C driver support.  The code ksz9477.c and ksz_common.c are
used together to generate the I2C driver.
Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
[george.mccollister@gmail.com: bring up to date, use ksz_common regmap macros]
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The PluDevice register provides the authoritative chip model/revision.

Since the model number is purely used for reporting purposes, follow
the hardware team convention of subtracting 0x10 from the PluDevice
register to obtain the chip model/revision number.
Suggested-by: Francois H. Theron <francois.theron@netronome.com>
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When tcp sends a TSO packet, adding a PSH flag on it
reduces the sojourn time of GRO packet in GRO receivers.

This is particularly the case under pressure, since RX queues
receive packets for many concurrent flows.

A sender can give a hint to GRO engines when it is
appropriate to flush a super-packet, especially when pacing
is in the picture, since next packet is probably delayed by
one ms.

Having less packets in GRO engine reduces chance
of LRU eviction or inflated RTT, and reduces GRO cost.

We found recently that we must not set the PSH flag on
individual full-size MSS segments [1] :

 Under pressure (CWR state), we better let the packet sit
 for a small delay (depending on NAPI logic) so that the
 ACK packet is delayed, and thus next packet we send is
 also delayed a bit. Eventually the bottleneck queue can
 be drained. DCTCP flows with CWND=1 have demonstrated
 the issue.

This patch allows to slowdown the aggregate traffic without
involving high resolution timers on senders and/or
receivers.

It has been used at Google for about four years,
and has been discussed at various networking conferences.

[1] segments smaller than MSS already have PSH flag set
    by tcp_sendmsg() / tcp_mark_push(), unless MSG_MORE
    has been requested by the user.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is the equivalent of commit 2c6b55f4 ("ipv6: fix neighbour
resolution with raw socket") for ip6_confirm_neigh(): we can send a
packet with MSG_CONFIRM on a raw socket for a connected route, so the
gateway would be :: here, and we should pick the next hop using
rt6_nexthop() instead.

This was found by code review and, to the best of my knowledge, doesn't
actually fix a practical issue: the destination address from the packet
is not considered while confirming a neighbour, as ip6_confirm_neigh()
calls choose_neigh_daddr() without passing the packet, so there are no
similar issues as the one fixed by said commit.

A possible source of issues with the existing implementation might come
from the fact that, if we have a cached dst, we won't consider it,
while rt6_nexthop() takes care of that. I might just not be creative
enough to find a practical problem here: the only way to affect this
with cached routes is to have one coming from an ICMPv6 redirect, but
if the next hop is a directly connected host, there should be no
topology for which a redirect applies here, and tests with redirected
routes show no differences for MSG_CONFIRM (and MSG_PROBE) packets on
raw sockets destined to a directly connected host.

However, directly using the dst gateway here is not consistent anymore
with neighbour resolution, and, in general, as we want the next hop,
using rt6_nexthop() looks like the only sane way to fetch it.
Reported-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the support for Synopsys HAPS board that uses GMAC5.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds ability to switch beetween two PHY SGMII modes.
Some hardware, for example, FPGA IP designs may use 6-wire mode
which enables differential SGMII clock to MAC.
Signed-off-by: Vitaly Gaiduk <vitaly.gaiduk@cloudbear.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add documentation of ti,sgmii-ref-clock-output-enable
which can be used to select SGMII mode type (4 or 6-wire).
Signed-off-by: Vitaly Gaiduk <vitaly.gaiduk@cloudbear.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

This change documents the 'mac-mode' property that was introduced in the
'stmmac' driver to support passive mode converters that can sit in-between
the MAC & PHY.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In-between the MAC & PHY there can be a mode converter, which converts one
mode to another (e.g. GMII-to-RGMII).

The converter, can be passive (i.e. no driver or OS/SW information
required), so the MAC & PHY need to be configured differently.

For the `stmmac` driver, this is implemented via a `mac-mode` property in
the device-tree, which configures the MAC into a certain mode, and for the
PHY a `phy_interface` field will hold the mode of the PHY. The mode of the
PHY will be passed to the PHY and from there-on it work in a different
mode. If unspecified, the default `phy-mode` will be used for both.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sudarsana Reddy Kalluru says:

====================
qed* Fix series.

The patch series addresses couple of issues in the recent commits.
Patch (1) populates the actual dump-size of config attribute instead of
providing a fixed size value.
Patch(2) updates frame format of flash config buffer as required by
management FW (MFW).

Please consider applying it to net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

MFW associates the entity id to a config attribute instead of assigning
one entity id for all the config attributes.
This patch incorporates driver changes to link entity id to a config id
attribute.

Fixes: 0dabbe1b ("qed: Add driver API for flashing the config attributes.")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Driver currently returns max-buf-size as size of the config attribute.
This patch incorporates changes to read this value from MFW (if available)
and provide it to the user. Also did a trivial clean up in this path.

Fixes: d44a3ced ("qede: Add support for reading the config id attributes.")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Horman says:

====================
devlink: add unknown 'fw_load_policy' value

Dirk says:

Recently we added an unknown value for the 'reset_dev_on_drv_probe' devlink
parameter. Extend the 'fw_load_policy' parameter in the same way.

The only driver that uses this right now is the nfp driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If the 'app_fw_from_flash' HWinfo key is invalid, set the
'fw_load_policy' devlink parameter value to unknown.
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similar to the 'reset_dev_on_drv_probe' devlink parameter, it is useful
to have an unknown value which can be used by drivers to report that the
hardware value isn't recognized or is otherwise invalid instead of
failing the operation.

This is especially useful for u8/enum parameters.
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-next-for-davem-2019-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
We have a number of changes, but things are settling down:
 * a fix in the new 6 GHz channel support
 * a fix for recent minstrel (rate control) updates
   for an infinite loop
 * handle interface type changes better wrt. management frame
   registrations (for management frames sent to userspace)
 * add in-BSS RX time to survey information
 * handle HW rfkill properly if !CONFIG_RFKILL
 * send deauth on IBSS station expiry, to avoid state mismatches
 * handle deferred crypto tailroom updates in mac80211 better
   when device restart happens
 * fix a spectre-v1 - really a continuation of a previous patch
 * advertise NL80211_CMD_UPDATE_FT_IES as supported if so
 * add some missing parsing in VHT extended NSS support
 * support HE in mac80211_hwsim
 * let mac80211 drivers determine the max MTU themselves
along with the usual cleanups etc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently frame registrations are not purged, even when changing the
interface type.  This can lead to potentially weird situations where
frames possibly not allowed on a given interface type remain registered
due to the type switching happening after registration.

The kernel currently relies on userspace apps to actually purge the
registrations themselves, this is not something that the kernel should
rely on.

Add a call to cfg80211_mlme_purge_registrations() to forcefully remove
any registrations left over prior to switching the iftype.

Cc: stable@vger.kernel.org
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Link: https://lore.kernel.org/r/20190828211110.15005-1-denkenz@gmail.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Saeed Mahameed says:

====================
mlx5-updates-2019-09-10

Misc build warnings cleanup for mlx5:

1) Reduce stack usage in FW trace
2) Fix addr's type in mlx5dr_icm_dm
3) Fix rt's type in dr_action_create_reformat_action
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jose Abreu says:

====================
net: stmmac: Improvements for -next

Misc patches for -next. It includes:
 - Two fixes for features in -next only
 - New features support for GMAC cores (which includes GMAC4 and GMAC5)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement the ARP Offload feature in GMAC4 and GMAC5 cores.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds support for TX VLAN Offload using descriptors based features
available in GMAC4/5.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the support for Source Address Insertion and Replacement in GMAC4
and GMAC5 cores. Two methods are supported: Descriptor based and
register based.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

'value' was being or'ed with a value from another register. This is a
typo and could cause new written value to be wrong. Fix it.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds the support for VLAN HASH Filtering in GMAC4/5 cores.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When RX Coalesce settings are set to all zero (which is a valid setting)
we will currently get a divide-by-zero error. Fix it.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Huazhong Tan says:

====================
net: hns3: add a feature & bugfixes & cleanups

This patch-set includes a VF feature, bugfixes and cleanups for the HNS3
ethernet controller driver.

[patch 01/07] adds ethtool_ops.set_channels support for HNS3 VF driver

[patch 02/07] adds a recovery for setting channel fail.

[patch 03/07] fixes an error related to shaper parameter algorithm.

[patch 04/07] fixes an error related to ksetting.

[patch 05/07] adds cleanups for some log pinting.

[patch 06/07] adds a NULL pointer check before function calling.

[patch 07/07] adds some debugging information for reset issue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds more information for reset DFX. Also, adds some
cleanups to reset info, move reset_fail_cnt into struct
hclge_rst_stats, and modifies some print formats.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch checks ops->set_default_reset_request whether is NULL
before using it in function hns3_slot_reset.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The pfc_en and pfc_map need to be displayed in hexadecimal notation,
printing dma address should use %pad, and the end of printed string
needs to be add "\n".

This patch modifies them.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For hardware doesn't support use specified speed and duplex
to negotiate, it's unnecessary to check and modify the port
speed and duplex for fibre port when autoneg is on.

Fixes: 22f48e24 ("net: hns3: add autoneg and change speed support for fibre port")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently when hns3 driver configures the tm shaper to limit
bandwidth below 20Mbit using the parameters calculated by
hclge_shaper_para_calc(), the actual bandwidth limited by tm
hardware module is not accurate enough, for example, 1.28 Mbit
when the user is configuring 1 Mbit.

This patch adjusts the ir_calc to be closer to ir, and
always calculate the ir_b parameter when user is configuring
a small bandwidth. Also, removes an unnecessary parenthesis
when calculating denominator.

Fixes: 84844054 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After setting new channel num, it needs free old ring memory and
allocate new ring memory. If there is no enough memory and allocate
new ring memory fail, the ring may initialize fail. To make sure
the network interface can work normally, driver should revert the
channel to the old configuration.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds ethtool_ops.set_channels support for HNS3 VF driver,
and updates related TQP information and RSS information, to support
modification of VF TQP number, and uses current rss_size instead of
max_rss_size to initialize RSS.

Also, fixes a format error in hclgevf_get_rss().
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some features of 802.11ax without central organizing (AP) STA can also be
used in mesh mode. hwsim can be used to assist initial development of these
features without having access to HW.
Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
Link: https://lore.kernel.org/r/20190813063657.7544-1-sven@narfation.orgSigned-off-by: Johannes Berg <johannes.berg@intel.com>

commit 1222a160 ("nl80211: Fix possible Spectre-v1 for CQM
RSSI thresholds") was incomplete and requires one more fix to
prevent accessing to rssi_thresholds[n] because user can control
rssi_thresholds[i] values to make i reach to n. For example,
rssi_thresholds = {-400, -300, -200, -100} when last is -34.

Cc: stable@vger.kernel.org
Fixes: 1222a160 ("nl80211: Fix possible Spectre-v1 for CQM RSSI thresholds")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Link: https://lore.kernel.org/r/20190908005653.17433-1-masashi.honma@gmail.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Make it possibly for drivers to adjust the default max_mtu
by storing it in the hardware struct and using that value
for all interfaces.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Link: https://lore.kernel.org/r/1567738137-31748-1-git-send-email-wgong@codeaurora.orgSigned-off-by: Johannes Berg <johannes.berg@intel.com>

With the help of boolinit.cocci, we use !nl80211_reg_change_event_fill
instead of (nl80211_reg_change_event_fill == false). Meanwhile, Clean
up the code.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Link: https://lore.kernel.org/r/1567657537-65472-1-git-send-email-zhongjiang@huawei.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

When we expire an inactive station, try to send it a deauth. This
helps if it's actually still around, and just has issues with
beacon distribution (or we do), and it will not also remove us.
Then, if we have shared state, this may not be reset properly,
causing problems; for example, we saw a case where aggregation
sessions weren't removed properly (due to the TX start being
offloaded to firmware and it relying on deauth for stop), causing
a lot of traffic to get lost due to the SN reset after remove/add
of the peer.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20190830112451.21655-9-luca@coelho.fiSigned-off-by: Johannes Berg <johannes.berg@intel.com>

We already assume that key is not NULL and dereference it in a few
other places before we check whether it is NULL, so the check is
unnecessary.  Remove it.

Fixes: 96fc6efb ("mac80211: IEEE 802.11 Extended Key ID support")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20190830112451.21655-8-luca@coelho.fiSigned-off-by: Johannes Berg <johannes.berg@intel.com>