Allocate the buffer and completion ring structures. Do not populate the
rings yet. That will happen in the respective rx and tx datapath
follow-on patches
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add napi netdev device registration, interrupt handling and initial tx
and rx polling stubs. The stubs will be filled in follow-on patches.

Also:
- LRO feature advertisement and handling
- Also update ethtool logic
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

DQO queue creation requires additional parameters:
- TX completion/RX buffer queue size
- TX completion/RX buffer queue address
- TX/RX queue size
- RX buffer size
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- Add new DQO datapath structures:
  - `gve_rx_buf_queue_dqo`
  - `gve_rx_compl_queue_dqo`
  - `gve_rx_buf_state_dqo`
  - `gve_tx_desc_dqo`
  - `gve_tx_pending_packet_dqo`

- Incorporate these into the existing ring data structures:
  - `gve_rx_ring`
  - `gve_tx_ring`

Noteworthy mentions:

- `gve_rx_buf_state` represents an RX buffer which was posted to HW.
  Each RX queue has an array of these objects and the index into the
  array is used as the buffer_id when posted to HW.

- `gve_tx_pending_packet_dqo` is treated similarly for TX queues. The
  completion_tag is the index into the array.

- These two structures have links for linked lists which are represented
  by 16b indexes into a contiguous array of these structures.
  This reduces memory footprint compared to 64b pointers.

- We use unions for the writeable datapath structures to reduce cache
  footprint. GQI specific members will renamed like DQO members in a
  future patch.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

General description of rings and descriptors:

TX ring is used for sending TX packet buffers to the NIC. It has the
following descriptors:
- `gve_tx_pkt_desc_dqo` - Data buffer descriptor
- `gve_tx_tso_context_desc_dqo` - TSO context descriptor
- `gve_tx_general_context_desc_dqo` - Generic metadata descriptor

Metadata is a collection of 12 bytes. We define `gve_tx_metadata_dqo`
which represents the logical interpetation of the metadata bytes. It's
helpful to define this structure because the metadata bytes exist in
multiple descriptor types (including `gve_tx_tso_context_desc_dqo`),
and the device requires same field has the same value in all
descriptors.

The TX completion ring is used to receive completions from the NIC.
Having a separate ring allows for completions to be out of order. The
completion descriptor `gve_tx_compl_desc` has several different types,
most important are packet and descriptor completions. Descriptor
completions are used to notify the driver when descriptors sent on the
TX ring are done being consumed. The descriptor completion is only used
to signal that space is cleared in the TX ring. A packet completion will
be received when a packet transmitted on the TX queue is done being
transmitted.

In addition there are "miss" and "reinjection" completions. The device
implements a "flow-miss model". Most packets will simply receive a
packet completion. The flow-miss system may choose to process a packet
based on its contents. A TX packet which experiences a flow miss would
receive a miss completion followed by a later reinjection completion.
The miss-completion is received when the packet starts to be processed
by the flow-miss system and the reinjection completion is received when
the flow-miss system completes processing the packet and sends it on the
wire.

The RX buffer ring is used to send buffers to HW via the
`gve_rx_desc_dqo` descriptor.

Received packets are put into the RX queue by the device, which
populates the `gve_rx_compl_desc_dqo` descriptor. The RX descriptors
refer to buffers posted by the buffer queue. Received buffers may be
returned out of order, such as when HW LRO is enabled.

Important concepts:
- "TX" and "RX buffer" queues, which send descriptors to the device, use
  MMIO doorbells to notify the device of new descriptors.

- "RX" and "TX completion" queues, which receive descriptors from the
  device, use a "generation bit" to know when a descriptor was populated
  by the device. The driver initializes all bits with the "current
  generation". The device will populate received descriptors with the
  "next generation" which is inverted from the current generation. When
  the ring wraps, the current/next generation are swapped.

- It's the driver's responsibility to ensure that the RX and TX
  completion queues are not overrun. This can be accomplished by
  limiting the number of descriptors posted to HW.

- TX packets have a 16 bit completion_tag and RX buffers have a 16 bit
  buffer_id. These will be returned on the TX completion and RX queues
  respectively to let the driver know which packet/buffer was completed.

Bitfields are used to describe descriptor fields. This notation is more
concise and readable than shift-and-mask. It is possible because the
driver is restricted to little endian platforms.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unlike GQI, DQO RX descriptors do not contain the L3 and L4 type of the
packet. L3 and L4 types are necessary in order to set the hash and csum
on RX SKBs correctly.

DQO RX descriptors instead contain a 10 bit PTYPE index. The PTYPE map
enables the device to tell the driver how to map from PTYPE index to
L3/L4 type.

The device doesn't provide any guarantees about the range of possible
PTYPEs, so we just use a 1024 entry array to implement a fast mapping
structure.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- In addition to TX and RX queues, DQO has TX completion and RX buffer
  queues.
  - TX completions are received when the device has completed sending a
    packet on the wire.
  - RX buffers are posted on a separate queue form the RX completions.
- DQO descriptor rings are allowed to be smaller than PAGE_SIZE.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The currently supported queue formats are:
- GQI_RDA - GQI with raw DMA addressing
- GQI_QPL - GQI with queue page list
- DQO_RDA - DQO with raw DMA addressing

The old `gve_priv.raw_addressing` value is only used for GQI_RDA, so we
remove it in favor of just checking against GQI_RDA
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current model uses an integer ID and a fixed size struct for the
parameters of each device option.

The new model allows the device option structs to grow in size over
time. A driver may assume that changes to device option structs will
always be appended.

New device options will also generally have a
`supported_features_mask` so that the driver knows which fields within a
particular device option are enabled.

`gve_device_option.feat_mask` is changed to `required_features_mask`,
and it is a bitmask which must match the value expected by the driver.
This gives the device the ability to break backwards compatibility with
old drivers for certain features by blocking the old drivers from trying
to use the feature.

We maintain ABI compatibility with the old model for
GVE_DEV_OPT_ID_RAW_ADDRESSING in case a driver is using a device which
does not support the new model.

This patch introduces some new terminology:

RDA - Raw DMA Addressing - Buffers associated with SKBs are directly DMA
      mapped and read/updated by the device.

QPL - Queue Page Lists - Driver uses bounce buffers which are DMA mapped
      with the device for read/write and data is copied from/to SKBs.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using `page_offset` like a boolean means a page may only be split into
two sections. With page sizes larger than 4k, this can be very wasteful.
Future commits in this patchset use `struct gve_rx_slot_page_info` in a
way which supports a fixed buffer size and a variable page size.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Future use cases will have a different padding value.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These functions will be shared by the GQI and DQO variants of the GVNIC
driver as of follow-up patches in this series.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

DQO is a new descriptor format for our next generation virtual NIC.
Signed-off-by: Bailey Forrest <bcf@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Modify the netdev_dbg content from int to char * in usbnet_defer_kevent(),
this looks more readable.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steen Hegelund says:

====================
Adding the Sparx5i Switch Driver

This series provides the Microchip Sparx5i Switch Driver

The SparX-5 Enterprise Ethernet switch family provides a rich set of
Enterprise switching features such as advanced TCAM-based VLAN and QoS
processing enabling delivery of differentiated services, and security
through TCAMbased frame processing using versatile content aware processor
(VCAP). IPv4/IPv6 Layer 3 (L3) unicast and multicast routing is supported
with up to 18K IPv4/9K IPv6 unicast LPM entries and up to 9K IPv4/3K IPv6
(S,G) multicast groups. L3 security features include source guard and
reverse path forwarding (uRPF) tasks. Additional L3 features include
VRF-Lite and IP tunnels (IP over GRE/IP).

The SparX-5 switch family features a highly flexible set of Ethernet ports
with support for 10G and 25G aggregation links, QSGMII, USGMII, and
USXGMII.  The device integrates a powerful 1 GHz dual-core ARM® Cortex®-A53
CPU enabling full management of the switch and advanced Enterprise
applications.

The SparX-5 switch family targets managed Layer 2 and Layer 3 equipment in
SMB, SME, and Enterprise where high port count 1G/2.5G/5G/10G switching
with 10G/25G aggregation links is required.

The SparX-5 switch family consists of following SKUs:

  VSC7546 SparX-5-64 supports up to 64 Gbps of bandwidth with the following
  primary port configurations.
   - 6 ×10G
   - 16 × 2.5G + 2 × 10G
   - 24 × 1G + 4 × 10G

  VSC7549 SparX-5-90 supports up to 90 Gbps of bandwidth with the following
  primary port configurations.
   - 9 × 10G
   - 16 × 2.5G + 4 × 10G
   - 48 × 1G + 4 × 10G

  VSC7552 SparX-5-128 supports up to 128 Gbps of bandwidth with the
  following primary port configurations.
   - 12 × 10G
   - 6 x 10G + 2 x 25G
   - 16 × 2.5G + 8 × 10G
   - 48 × 1G + 8 × 10G

  VSC7556 SparX-5-160 supports up to 160 Gbps of bandwidth with the
  following primary port configurations.
   - 16 × 10G
   - 10 × 10G + 2 × 25G
   - 16 × 2.5G + 10 × 10G
   - 48 × 1G + 10 × 10G

  VSC7558 SparX-5-200 supports up to 200 Gbps of bandwidth with the
  following primary port configurations.
   - 20 × 10G
   - 8 × 25G

In addition, the device supports one 10/100/1000/2500/5000 Mbps
SGMII/SerDes node processor interface (NPI) Ethernet port.

Time sensitive networking (TSN) is supported through a comprehensive set of
features including frame preemption, cut-through, frame replication and
elimination for reliability, enhanced scheduling: credit-based shaping,
time-aware shaping, cyclic queuing, and forwarding, and per-stream policing
and filtering.

Together with IEEE 1588 and IEEE 802.1AS support, this guarantees
low-latency deterministic networking for Industrial Ethernet.

The Sparx5i support is developed on the PCB134 and PCB135 evaluation boards.

- PCB134 main networking features:
  - 12x SFP+ front 10G module slots (connected to Sparx5i through SFI).
  - 8x SFP28 front 25G module slots (connected to Sparx5i through SFI high
    speed).
  - Optional, one additional 10/100/1000BASE-T (RJ45) Ethernet port
    (on-board VSC8211 PHY connected to Sparx5i through SGMII).

- PCB135 main networking features:
  - 48x1G (10/100/1000M) RJ45 front ports using 12xVSC8514 QuadPHY’s each
    connected to VSC7558 through QSGMII.
  - 4x10G (1G/2.5G/5G/10G) RJ45 front ports using the AQR407 10G QuadPHY
    each port connects to VSC7558 through SFI.
  - 4x SFP28 25G module slots on back connected to VSC7558 through SFI high
    speed.
  - Optional, one additional 1G (10/100/1000M) RJ45 port using an on-board
    VSC8211 PHY, which can be connected to VSC7558 NPI port through SGMII
    using a loopback add-on PCB)

This series provides support for:
  - SFPs and DAC cables via PHYLINK with a number of 5G, 10G and 25G
    devices and media types.
  - Port module configuration for 10M to 25G speeds with SGMII, QSGMII,
    1000BASEX, 2500BASEX and 10GBASER as appropriate for these modes.
  - SerDes configuration via the Sparx5i SerDes driver (see below).
  - Host mode providing register based injection and extraction.
  - Switch mode providing MAC/VLAN table learning and Layer2 switching
    offloaded to the Sparx5i switch.
  - STP state, VLAN support, host/bridge port mode, Forwarding DB, and
    configuration and statistics via ethtool.

More support will be added at a later stage.

The Sparx5i Chip Register Model can be browsed at this location:
https://github.com/microchip-ung/sparx-5_reginfo
and the datasheet is available here:
https://ww1.microchip.com/downloads/en/DeviceDoc/SparX-5_Family_L2L3_Enterprise_10G_Ethernet_Switches_Datasheet_00003822B.pdf

The series depends on the following series currently on their way
into the kernel:

- 25G Base-R phy mode
  Link: https://lore.kernel.org/r/20210611125453.313308-1-steen.hegelund@microchip.com/
- Sparx5 Reset Driver
  Link: https://lore.kernel.org/r/20210416084054.2922327-1-steen.hegelund@microchip.com/

ChangeLog:
v5:
    - cover letter
        - updated the description to match the latest data sheets
    - basic driver
        - added error message in case of reset controller error
        - port struct: replacing has_sfp with inband, adding pause_adv
    - host mode
        - port cleanup: unregisters netdevs and then removes phylink etc
        - checking for pause_adv when comparing port config changes
        - getting duplex and pause state in the link_up callback.
        - getting inband, autoneg and pause_adv config in the pcs_config
          callback.
    - port
        - use only the pause_adv bits when getting aneg status
        - use the inband state when updating the PCS and port config
v4:
    - basic driver:
        Using devm_reset_control_get_optional_shared to get the reset
        control, and let the reset framework check if it is valid.
    - host mode (phylink):
        Use the PCS operations to get state and update configuration.
        Removed the setting of interface modes.  Let phylink control this.
        Using the new 5gbase-r and 25gbase-r modes.
        Using a helper function to check if one of the 3 base-r modes has
        been selected.
        Currently it will not be possible to change the interface mode by
        changing the speed (e.g via ethtool).  This will be added later.
v3:
    - basic driver:
        - removed unneeded braces
        - release reference to ports node after use
        - use dev_err_probe to handle DEFER
        - update error value when bailing out (a few cases)
        - updated formatting of port struct and grouping of bool values
        - simplified the spx5_rmw and spx5_inst_rmw inline functions
    - host mode (netdev):
        - removed lockless flag
        - added port timer init
    - host mode (packet - manual injection):
        - updated error counters in error situations
        - implemented timer handling of watermark threshold: stop and
          restart netif queues.
        - fixed error message handling (rate limited)
        - fixed comment style error
        - used DIV_ROUND_UP macro
        - removed a debug message for open ports

v2:
    - Updated bindings:
        - drop minItems for the reg property
    - Statistics implementation:
        - Reorganized statistics into ethtool groups:
            eth-phy, eth-mac, eth-ctrl, rmon
          as defined by the IEEE 802.3 categories and RFC 2819.
        - The remaining statistics are provided by the classic ethtool
          statistics command.
    - Hostmode support:
        - Removed netdev renaming
        - Validate ethernet address in sparx5_set_mac_address()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This provides the configuration for the currently available evaluation
boards PCB134 and PCB135.

The series depends on the following series currently on its way
into the kernel:

- Sparx5 Reset Driver
  Link: https://lore.kernel.org/r/20210416084054.2922327-1-steen.hegelund@microchip.com/Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds statistic counters for the network interfaces provided
by the driver.  It also adds CPU port counters (which are not
exposed by ethtool).
This also adds support for configuring the network interface
parameters via ethtool: speed, duplex, aneg etc.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This configures the Sparx5 calendars according to the bandwidth
requested in the Device Tree nodes.
It also checks if the total requested bandwidth is within the
specs of the detected Sparx5 models limits.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds SwitchDev support by hardware offloading the
software bridge.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds Sparx5 VLAN support.

Sparx5 has more VLAN features than provided here, but these will be added
in later series. For now we only add the basic L2 features.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds the Sparx5 MAC tables: listening for MAC table updates and
updating on request.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This add configuration of the Sparx5 port module instances.

Sparx5 has in total 65 logical ports (denoted D0 to D64) and 33
physical SerDes connections (S0 to S32).  The 65th port (D64) is fixed
allocated to SerDes0 (S0). The remaining 64 ports can in various
multiplexing scenarios be connected to the remaining 32 SerDes using
QSGMII, or USGMII or USXGMII extenders. 32 of the ports can have a 1:1
mapping to the 32 SerDes.

Some additional ports (D65 to D69) are internal to the device and do not
connect to port modules or SerDes macros. For example, internal ports are
used for frame injection and extraction to the CPU queues.

The 65 logical ports are split up into the following blocks.

- 13 x 5G ports (D0-D11, D64)
- 32 x 2G5 ports (D16-D47)
- 12 x 10G ports (D12-D15, D48-D55)
- 8 x 25G ports (D56-D63)

Each logical port supports different line speeds, and depending on the
speeds supported, different port modules (MAC+PCS) are needed. A port
supporting 5 Gbps, 10 Gbps, or 25 Gbps as maximum line speed, will have a
DEV5G, DEV10G, or DEV25G module to support the 5 Gbps, 10 Gbps (incl 5
Gbps), or 25 Gbps (including 10 Gbps and 5 Gbps) speeds. As well as, it
will have a shadow DEV2G5 port module to support the lower speeds
(10/100/1000/2500Mbps). When a port needs to operate at lower speed and the
shadow DEV2G5 needs to be connected to its corresponding SerDes

Not all interface modes are supported in this series, but will be added at
a later stage.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds netdevs and phylink support for the ports in the switch.
It also adds register based injection and extraction for these ports.

Frame DMA support for injection and extraction will be added in a later
series.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds the Sparx5 basic SwitchDev driver framework with IO range
mapping, switch device detection and core clock configuration.

Support for ports, phylink, netdev, mactable etc. are in the following
patches.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Document the Sparx5 switch device driver bindings
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The fallback case of fwnode_mdbiobus_register()
(relevant for !CONFIG_FWNODE_MDIO) was defined with wrong
argument name, causing a compilation error. Fix that.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Dave observed number of machines hitting OOM on the UDP send
path. The workload seems to be sending large UDP packets over
loopback. Since loopback has MTU of 64k kernel will try to
allocate an skb with up to 64k of head space. This has a good
chance of failing under memory pressure. What's worse if
the message length is <32k the allocation may trigger an
OOM killer.

This is entirely avoidable, we can use an skb with page frags.

af_unix solves a similar problem by limiting the head
length to SKB_MAX_ALLOC. This seems like a good and simple
approach. It means that UDP messages > 16kB will now
use fragments if underlying device supports SG, if extra
allocator pressure causes regressions in real workloads
we can switch to trying the large allocation first and
falling back.

v4: pre-calculate all the additions to alloclen so
    we can be sure it won't go over order-2
Reported-by: Dave Jones <dsj@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure that SO_NETNS_COOKIE returns a non-zero value, and
that sockets from different namespaces have a distinct cookie
value.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's getting more common to run nested container environments for
testing cloud software. One of such examples is Kind [1] which runs a
Kubernetes cluster in Docker containers on a single host. Each container
acts as a Kubernetes node, and thus can run any Pod (aka container)
inside the former. This approach simplifies testing a lot, as it
eliminates complicated VM setups.

Unfortunately, such a setup breaks some functionality when cgroupv2 BPF
programs are used for load-balancing. The load-balancer BPF program
needs to detect whether a request originates from the host netns or a
container netns in order to allow some access, e.g. to a service via a
loopback IP address. Typically, the programs detect this by comparing
netns cookies with the one of the init ns via a call to
bpf_get_netns_cookie(NULL). However, in nested environments the latter
cannot be used given the Kubernetes node's netns is outside the init ns.
To fix this, we need to pass the Kubernetes node netns cookie to the
program in a different way: by extending getsockopt() with a
SO_NETNS_COOKIE option, the orchestrator which runs in the Kubernetes
node netns can retrieve the cookie and pass it to the program instead.

Thus, this is following up on Eric's commit 3d368ab8 ("net:
initialize net->net_cookie at netns setup") to allow retrieval via
SO_NETNS_COOKIE.  This is also in line in how we retrieve socket cookie
via SO_COOKIE.

  [1] https://kind.sigs.k8s.io/Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Cc: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Dmytro Linkin says:

====================
Fixes for devlink rate objects API

Patch #1 fixes not decreased refcount of parent node for destroyed leaf
object.

Patch #2 fixes incorect eswitch mode check.

Patch #3 protects list traversing with a lock.

====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Devlink eswitch set command doesn't hold devlink->lock, which makes
possible race condition between rate list traversing and others devlink
rate KAPI calls, like devlink_rate_nodes_destroy().
Hold devlink lock while traversing the list.

Fixes: a8ecb93e ("devlink: Introduce rate nodes")
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When eswitch is disabled, querying its current mode results in error.
Due to this when trying to set the eswitch mode for mlx5 devices, it
fails to set the eswitch switchdev mode.
Hence remove such check.

Fixes: a8ecb93e ("devlink: Introduce rate nodes")
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Port functions, like SFs, can be deleted by the user when its leaf rate
object has parent node. In such case node refcnt won't be decreased
which blocks the node from deletion later.
Do simple refcnt decrease, since driver in cleanup stage. This:
1) assumes that driver took proper internal parent unset action;
2) allows to avoid nested callbacks call and deadlock.

Fixes: d7555984 ("devlink: Allow setting parent node of rate objects")
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

virtio_find_vqs_ctx() is defined but never be called currently,
it is the right place to use it.
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit d26b698d ("net/tls: add skeleton of MIB statistics")
introduced __TLS_DEC_STATS(), but it is not used and __SNMP_DEC_STATS() is
not defined also. Let's remove it.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

This commit adds two stats for the socket migration feature to evaluate the
effectiveness: LINUX_MIB_TCPMIGRATEREQ(SUCCESS|FAILURE).

If the migration fails because of the own_req race in receiving ACK and
sending SYN+ACK paths, we do not increment the failure stat. Then another
CPU is responsible for the req.

Link: https://lore.kernel.org/bpf/CAK6E8=cgFKuGecTzSCSQ8z3YJ_163C0uwO9yRvfDSE7vOe9mJA@mail.gmail.com/Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TCP checksums on received packets may be set to NULL by the sender if CSO
is enabled. The hypervisor flags these packets as check-sum-ok and the
skb is then flagged CHECKSUM_UNNECESSARY. If these packets are then
forwarded the sender will not request CSO due to the CHECKSUM_UNNECESSARY
flag. The result is a TCP packet sent with a bad checksum. This change
sets up CHECKSUM_PARTIAL on these packets causing the sender to correctly
request CSUM offload.
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Reviewed-by: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com>
Tested-by: Cristobal Forno <cforno12@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-net-next-2021-06-22

1) Various minor cleanups and fixes from net-next branch
2) Optimize mlx5 feature check on tx and
   a fix to allow Vxlan with Ipsec offloads
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next:

1) Skip non-SCTP packets in the new SCTP chunk support for nft_exthdr,
   from Phil Sutter.

2) Simplify TCP option sanity check for TCP packets, also from Phil.

3) Add a new expression to store when the rule has been used last time.

4) Pass the hook state object to log function, from Florian Westphal.

5) Document the new sysctl knobs to tune the flowtable timeouts,
   from Oz Shlomo.

6) Fix snprintf error check in the new nfnetlink_hook infrastructure,
   from Dan Carpenter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

According to a comment in commit 99513cfa ("selftest: Fixes for
icmp_redirect test") the test "IPv6: mtu exception plus redirect" is
expected to fail, because of a bug in the IPv6 logic that hasn't been
fixed yet apparently.

We should probably consider this failure as an "expected failure",
therefore change the script to return XFAIL for that particular test and
also report the total amount of expected failures at the end of the run.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>