Using a default domain on DT based platforms is unnecessary.
Signed-off-by: Mubin Sayyed <mubin.usman.sayyed@xilinx.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200317125600.15913-5-mubin.usman.sayyed@xilinx.com

Register default arch handler via driver instead of directly pointing to
xilinx intc controller. This patch makes architecture code more generic.

Driver calls generic domain specific irq handler which does the most of
things self. Also get rid of concurrent_irq counting which hasn't been
exported anywhere.
Based on this loop was also optimized by using do/while loop instead of
goto loop.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Stefan Asserhall <stefan.asserhall@xilinx.com>
Link: https://lore.kernel.org/r/20200317125600.15913-4-mubin.usman.sayyed@xilinx.com

There is no ret filled in case of irq_domain_add_linear() failure.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Stefan Asserhall <stefan.asserhall@xilinx.com>
Link: https://lore.kernel.org/r/20200317125600.15913-3-mubin.usman.sayyed@xilinx.com

Added support for cascaded interrupt controllers.

Following cascaded configurations have been tested,

- peripheral->xilinx-intc->xilinx-intc->gic->Cortexa53 processor
  on zcu102 board
- peripheral->xilinx-intc->xilinx-intc->microblaze processor
  on kcu105 board
Signed-off-by: Mubin Sayyed <mubin.usman.sayyed@xilinx.com>
Signed-off-by: Anirudha Sarangi <anirudha.sarangi@xilinx.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200317125600.15913-2-mubin.usman.sayyed@xilinx.com

Enable TCU support for Ingenic X1000, which can be supported by
the existing driver.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1584456160-40060-3-git-send-email-zhouyanjie@wanyeetech.com

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200319214531.GA21326@embeddedor.com

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200319214438.GA21123@embeddedor.com

Clear its own IRQs before the parent IRQ get enabled, so that the
remaining IRQs do not accidentally interrupt the parent IRQ controller.

This patch also fixes a reboot bug on OX820 SoC, where the remaining
rps-timer IRQ raises a GIC interrupt that is left pending. After that,
the rps-timer IRQ is cleared during driver initialization, and there's
no IRQ left in rps-irq when local_irq_enable() is called, which evokes
an error message "unexpected IRQ trap".

Fixes: bdd272cb ("irqchip: versatile FPGA: support cascaded interrupts from DT")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200321133842.2408823-1-mans0n@gorani.run

There is no special reason to set virtual LPI pending table as
non-shareable. If we choose to hard code the shareability without
probing, Inner-Shareable is likely to be a better choice, as the
VPEs can move around and benefit from having the redistributors
snooping each other's cache, if that's something they can do.

Furthermore, Hisilicon hip08 ends up with unspecified errors when
mixing shareability attributes. So let's move to IS attributes for
the VPT. This has also been tested on D05 and didn't show any
regression.
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
[maz: rewrote commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191130073849.38378-1-guoheyi@huawei.com

Enclose the chained handler with chained_irq_{enter,exit}(), so that the
muxed interrupts get properly acked.

This patch also fixes a reboot bug on OX820 SoC, where the jiffies timer
interrupt is never acked. The kernel waits a clock tick forever in
calibrate_delay_converge(), which leads to a boot hang.

Fixes: c41b16f8 ("ARM: integrator/versatile: consolidate FPGA IRQ handling code")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200319023448.1479701-1-mans0n@gorani.run

On a very heavily loaded D05 with GICv4, I managed to trigger the
following lockdep splat:

[ 6022.598864] ======================================================
[ 6022.605031] WARNING: possible circular locking dependency detected
[ 6022.611200] 5.6.0-rc4-00026-geee7c7b0f498 #680 Tainted: G            E
[ 6022.618061] ------------------------------------------------------
[ 6022.624227] qemu-system-aar/7569 is trying to acquire lock:
[ 6022.629789] ffff042f97606808 (&p->pi_lock){-.-.}, at: try_to_wake_up+0x54/0x7a0
[ 6022.637102]
[ 6022.637102] but task is already holding lock:
[ 6022.642921] ffff002fae424cf0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x5c/0x98
[ 6022.651350]
[ 6022.651350] which lock already depends on the new lock.
[ 6022.651350]
[ 6022.659512]
[ 6022.659512] the existing dependency chain (in reverse order) is:
[ 6022.666980]
[ 6022.666980] -> #2 (&irq_desc_lock_class){-.-.}:
[ 6022.672983]        _raw_spin_lock_irqsave+0x50/0x78
[ 6022.677848]        __irq_get_desc_lock+0x5c/0x98
[ 6022.682453]        irq_set_vcpu_affinity+0x40/0xc0
[ 6022.687236]        its_make_vpe_non_resident+0x6c/0xb8
[ 6022.692364]        vgic_v4_put+0x54/0x70
[ 6022.696273]        vgic_v3_put+0x20/0xd8
[ 6022.700183]        kvm_vgic_put+0x30/0x48
[ 6022.704182]        kvm_arch_vcpu_put+0x34/0x50
[ 6022.708614]        kvm_sched_out+0x34/0x50
[ 6022.712700]        __schedule+0x4bc/0x7f8
[ 6022.716697]        schedule+0x50/0xd8
[ 6022.720347]        kvm_arch_vcpu_ioctl_run+0x5f0/0x978
[ 6022.725473]        kvm_vcpu_ioctl+0x3d4/0x8f8
[ 6022.729820]        ksys_ioctl+0x90/0xd0
[ 6022.733642]        __arm64_sys_ioctl+0x24/0x30
[ 6022.738074]        el0_svc_common.constprop.3+0xa8/0x1e8
[ 6022.743373]        do_el0_svc+0x28/0x88
[ 6022.747198]        el0_svc+0x14/0x40
[ 6022.750761]        el0_sync_handler+0x124/0x2b8
[ 6022.755278]        el0_sync+0x140/0x180
[ 6022.759100]
[ 6022.759100] -> #1 (&rq->lock){-.-.}:
[ 6022.764143]        _raw_spin_lock+0x38/0x50
[ 6022.768314]        task_fork_fair+0x40/0x128
[ 6022.772572]        sched_fork+0xe0/0x210
[ 6022.776484]        copy_process+0x8c4/0x18d8
[ 6022.780742]        _do_fork+0x88/0x6d8
[ 6022.784478]        kernel_thread+0x64/0x88
[ 6022.788563]        rest_init+0x30/0x270
[ 6022.792390]        arch_call_rest_init+0x14/0x1c
[ 6022.796995]        start_kernel+0x498/0x4c4
[ 6022.801164]
[ 6022.801164] -> #0 (&p->pi_lock){-.-.}:
[ 6022.806382]        __lock_acquire+0xdd8/0x15c8
[ 6022.810813]        lock_acquire+0xd0/0x218
[ 6022.814896]        _raw_spin_lock_irqsave+0x50/0x78
[ 6022.819761]        try_to_wake_up+0x54/0x7a0
[ 6022.824018]        wake_up_process+0x1c/0x28
[ 6022.828276]        wakeup_softirqd+0x38/0x40
[ 6022.832533]        __tasklet_schedule_common+0xc4/0xf0
[ 6022.837658]        __tasklet_schedule+0x24/0x30
[ 6022.842176]        check_irq_resend+0xc8/0x158
[ 6022.846609]        irq_startup+0x74/0x128
[ 6022.850606]        __enable_irq+0x6c/0x78
[ 6022.854602]        enable_irq+0x54/0xa0
[ 6022.858431]        its_make_vpe_non_resident+0xa4/0xb8
[ 6022.863557]        vgic_v4_put+0x54/0x70
[ 6022.867469]        kvm_arch_vcpu_blocking+0x28/0x38
[ 6022.872336]        kvm_vcpu_block+0x48/0x490
[ 6022.876594]        kvm_handle_wfx+0x18c/0x310
[ 6022.880938]        handle_exit+0x138/0x198
[ 6022.885022]        kvm_arch_vcpu_ioctl_run+0x4d4/0x978
[ 6022.890148]        kvm_vcpu_ioctl+0x3d4/0x8f8
[ 6022.894494]        ksys_ioctl+0x90/0xd0
[ 6022.898317]        __arm64_sys_ioctl+0x24/0x30
[ 6022.902748]        el0_svc_common.constprop.3+0xa8/0x1e8
[ 6022.908046]        do_el0_svc+0x28/0x88
[ 6022.911871]        el0_svc+0x14/0x40
[ 6022.915434]        el0_sync_handler+0x124/0x2b8
[ 6022.919951]        el0_sync+0x140/0x180
[ 6022.923773]
[ 6022.923773] other info that might help us debug this:
[ 6022.923773]
[ 6022.931762] Chain exists of:
[ 6022.931762]   &p->pi_lock --> &rq->lock --> &irq_desc_lock_class
[ 6022.931762]
[ 6022.942101]  Possible unsafe locking scenario:
[ 6022.942101]
[ 6022.948007]        CPU0                    CPU1
[ 6022.952523]        ----                    ----
[ 6022.957039]   lock(&irq_desc_lock_class);
[ 6022.961036]                                lock(&rq->lock);
[ 6022.966595]                                lock(&irq_desc_lock_class);
[ 6022.973109]   lock(&p->pi_lock);
[ 6022.976324]
[ 6022.976324]  *** DEADLOCK ***

This is happening because we have a pending doorbell that requires
retrigger. As SW retriggering is done in a tasklet, we trigger the
circular dependency above.

The easy cop-out is to provide a retrigger callback that doesn't
require acquiring any extra lock.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200310184921.23552-5-maz@kernel.org

The irq_retrigger callback is supposed to return 0 when retrigger
has failed, and a non-zero value otherwise. Tell the core code
that the driver has succedded in using the HW to retrigger the
interrupt (if ever).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200310184921.23552-4-maz@kernel.org

The irq_retrigger callback is supposed to return 0 when retrigger
has failed, and a non-zero value otherwise. Tell the core code
that the driver has succedded in using the HW to retrigger the
interrupt.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200310184921.23552-3-maz@kernel.org

The irq_retrigger callback is supposed to return 0 when retrigger
has failed, and a non-zero value otherwise. Tell the core code
that the driver has succedded in using the HW to retrigger the
interrupt.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200310184921.23552-2-maz@kernel.org

The GICv3 ITS driver assumes that once it has latched on a page size for
a given BASER register, it can use the same page size as the maximum
page size for all subsequent BASER registers.

Although it worked so far, nothing in the architecture guarantees this,
and Nianyao Tang hit this problem on some undisclosed implementation.

Let's bite the bullet and probe the the supported page size on all BASER
registers before starting to populate the tables. This simplifies the
setup a bit, at the expense of a few additional MMIO accesses.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reported-by: Nianyao Tang <tangnianyao@huawei.com>
Tested-by: Nianyao Tang <tangnianyao@huawei.com>
Link: https://lore.kernel.org/r/1584089195-63897-1-git-send-email-zhangshaokun@hisilicon.com

Per the spec, the BCM2835's IRQs are all disabled when coming out of
power-on reset.  Its IRQ driver assumes that's still the case when the
kernel boots and does not perform any initialization of the registers.
However the Raspberry Pi Foundation's bootloader leaves the USB
interrupt enabled when handing over control to the kernel.

Quiesce IRQs and the FIQ if they were left enabled and log a message to
let users know that they should update the bootloader once a fixed
version is released.

If the USB interrupt is not quiesced and the USB driver later on claims
the FIQ (as it does on the Raspberry Pi Foundation's downstream kernel),
interrupt latency for all other peripherals increases and occasional
lockups occur.  That's because both the FIQ and the normal USB interrupt
fire simultaneously:

On a multicore Raspberry Pi, if normal interrupts are routed to CPU 0
and the FIQ to CPU 1 (hardcoded in the Foundation's kernel), then a USB
interrupt causes CPU 0 to spin in bcm2836_chained_handle_irq() until the
FIQ on CPU 1 has cleared it.  Other peripherals' interrupts are starved
as long.  I've seen CPU 0 blocked for up to 2.9 msec.  eMMC throughput
on a Compute Module 3 irregularly dips to 23.0 MB/s without this commit
but remains relatively constant at 23.5 MB/s with this commit.

The lockups occur when CPU 0 receives a USB interrupt while holding a
lock which CPU 1 is trying to acquire while the FIQ is temporarily
disabled on CPU 1.  At best users get RCU CPU stall warnings, but most
of the time the system just freezes.

Fixes: 89214f00 ("ARM: bcm2835: add interrupt controller driver")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/f97868ba4e9b86ddad71f44ec9d8b3b7d8daa1ea.1582618537.git.lukas@wunner.de

Current, PLIC driver can support only 1 PLIC on the board. However,
there can be multiple PLICs present on a two socket systems in RISC-V.

Modify the driver so that each PLIC handler can have a information
about individual PLIC registers and an irqdomain associated with it.

Tested on two socket RISC-V system based on VCU118 FPGA connected via
OmniXtend protocol.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20200302231146.15530-3-atish.patra@wdc.com

Currently, PLIC threshold is only initialized once in the beginning.
However, threshold can be set to disabled if a CPU is marked offline with
CPU hotplug feature. This will not allow to change the irq affinity to a
CPU that just came online.

Add PLIC specific CPU hotplug callbacks and enable the threshold when a CPU
comes online. Take this opportunity to move the external interrupt enable
code from trap init to PLIC driver as well. On cpu offline path, the driver
performs the exact opposite operations i.e. disable the interrupt and
the threshold.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20200302231146.15530-2-atish.patra@wdc.com

request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.

Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanosSigned-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200304004839.4729-1-afzal.mohd.ma@gmail.com

Restore alignment of the continuation of the devm_ioremap() call in
intc_irqpin_probe().

Fixes: 4bdc0d67 ("remove ioremap_nocache and devm_ioremap_nocache")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200212084744.9376-1-geert+renesas@glider.be

Add COMPILE_TEST support to IMX_INTMUX driver for better compile
testing coverage.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1583588547-7164-1-git-send-email-Anson.Huang@nxp.com

GICR_SYNCR is a 32bit register, so it is better to access it with
32bit access width, though we have not seen any real problem.
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200225090023.28020-1-guoheyi@huawei.com

GPIO hardware block is directly linked to EXTI block but EXTI handles
external interrupts only on edge. To be able to handle GPIO interrupt on
level a "hack" is done in gpio irq chip: parent interrupt (exti irq chip)
is retriggered following interrupt type and gpio line value.
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200219143229.18084-3-alexandre.torgue@st.com

This commit introduces retrigger support for stm32_ext_h chip.
It consists to rise the GIC interrupt mapped to an EXTI line.
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20200219143229.18084-2-alexandre.torgue@st.com

When transitioning some elder platforms to device tree it
becomes necessary to cascade VIC IRQ chips off another
interrupt controller.

Tested with the cascaded VIC on the Integrator/AP attached
logic module IM-PD1.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200219153543.137153-1-linus.walleij@linaro.org

Pull ext4 fixes from Ted Ts'o:
 "Two more bug fixes (including a regression) for 5.6"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: potential crash on allocation error in ext4_alloc_flex_bg_array()
  jbd2: fix data races at struct journal_head

Pull KVM fixes from Paolo Bonzini:
 "More bugfixes, including a few remaining "make W=1" issues such as too
  large frame sizes on some configurations.

  On the ARM side, the compiler was messing up shadow stacks between EL1
  and EL2 code, which is easily fixed with __always_inline"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: VMX: check descriptor table exits on instruction emulation
  kvm: x86: Limit the number of "kvm: disabled by bios" messages
  KVM: x86: avoid useless copy of cpufreq policy
  KVM: allow disabling -Werror
  KVM: x86: allow compiling as non-module with W=1
  KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipis
  KVM: Introduce pv check helpers
  KVM: let declaration of kvm_get_running_vcpus match implementation
  KVM: SVM: allocate AVIC data structures based on kvm_amd module parameter
  arm64: Ask the compiler to __always_inline functions used by KVM at HYP
  KVM: arm64: Define our own swab32() to avoid a uapi static inline
  KVM: arm64: Ask the compiler to __always_inline functions used at HYP
  kvm: arm/arm64: Fold VHE entry/exit work into kvm_vcpu_run_vhe()
  KVM: arm/arm64: Fix up includes for trace.h

KVM emulates UMIP on hardware that doesn't support it by setting the
'descriptor table exiting' VM-execution control and performing
instruction emulation. When running nested, this emulation is broken as
KVM refuses to emulate L2 instructions by default.

Correct this regression by allowing the emulation of descriptor table
instructions if L1 hasn't requested 'descriptor table exiting'.

Fixes: 07721fee ("KVM: nVMX: Don't emulate instructions in guest mode")
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Cc: stable@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull i2c fixes from Wolfram Sang:
 "I2C has three driver bugfixes for you. We agreed on the Mac regression
  to go in via I2C"

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  macintosh: therm_windtunnel: fix regression when instantiating devices
  i2c: altera: Fix potential integer overflow
  i2c: jz4780: silence log flood on txabrt

If sbi->s_flex_groups_allocated is zero and the first allocation fails
then this code will crash.  The problem is that "i--" will set "i" to
-1 but when we compare "i >= sbi->s_flex_groups_allocated" then the -1
is type promoted to unsigned and becomes UINT_MAX.  Since UINT_MAX
is more than zero, the condition is true so we call kvfree(new_groups[-1]).
The loop will carry on freeing invalid memory until it crashes.

Fixes: 7c990728 ("ext4: fix potential race between s_flex_groups online resizing and access")
Reviewed-by: Suraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20200228092142.7irbc44yaz3by7nb@kili.mountainSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Removing attach_adapter from this driver caused a regression for at
least some machines. Those machines had the sensors described in their
DT, too, so they didn't need manual creation of the sensor devices. The
old code worked, though, because manual creation came first. Creation of
DT devices then failed later and caused error logs, but the sensors
worked nonetheless because of the manually created devices.

When removing attach_adaper, manual creation now comes later and loses
the race. The sensor devices were already registered via DT, yet with
another binding, so the driver could not be bound to it.

This fix refactors the code to remove the race and only manually creates
devices if there are no DT nodes present. Also, the DT binding is updated
to match both, the DT and manually created devices. Because we don't
know which device creation will be used at runtime, the code to start
the kthread is moved to do_probe() which will be called by both methods.

Fixes: 3e7bed52 ("macintosh: therm_windtunnel: drop using attach_adapter")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201723Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Tested-by: Erhard Furtner <erhard_f@mailbox.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org # v4.19+

journal_head::b_transaction and journal_head::b_next_transaction could
be accessed concurrently as noticed by KCSAN,

 LTP: starting fsync04
 /dev/zero: Can't open blockdev
 EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
 ==================================================================
 BUG: KCSAN: data-race in __jbd2_journal_refile_buffer [jbd2] / jbd2_write_access_granted [jbd2]

 write to 0xffff99f9b1bd0e30 of 8 bytes by task 25721 on cpu 70:
  __jbd2_journal_refile_buffer+0xdd/0x210 [jbd2]
  __jbd2_journal_refile_buffer at fs/jbd2/transaction.c:2569
  jbd2_journal_commit_transaction+0x2d15/0x3f20 [jbd2]
  (inlined by) jbd2_journal_commit_transaction at fs/jbd2/commit.c:1034
  kjournald2+0x13b/0x450 [jbd2]
  kthread+0x1cd/0x1f0
  ret_from_fork+0x27/0x50

 read to 0xffff99f9b1bd0e30 of 8 bytes by task 25724 on cpu 68:
  jbd2_write_access_granted+0x1b2/0x250 [jbd2]
  jbd2_write_access_granted at fs/jbd2/transaction.c:1155
  jbd2_journal_get_write_access+0x2c/0x60 [jbd2]
  __ext4_journal_get_write_access+0x50/0x90 [ext4]
  ext4_mb_mark_diskspace_used+0x158/0x620 [ext4]
  ext4_mb_new_blocks+0x54f/0xca0 [ext4]
  ext4_ind_map_blocks+0xc79/0x1b40 [ext4]
  ext4_map_blocks+0x3b4/0x950 [ext4]
  _ext4_get_block+0xfc/0x270 [ext4]
  ext4_get_block+0x3b/0x50 [ext4]
  __block_write_begin_int+0x22e/0xae0
  __block_write_begin+0x39/0x50
  ext4_write_begin+0x388/0xb50 [ext4]
  generic_perform_write+0x15d/0x290
  ext4_buffered_write_iter+0x11f/0x210 [ext4]
  ext4_file_write_iter+0xce/0x9e0 [ext4]
  new_sync_write+0x29c/0x3b0
  __vfs_write+0x92/0xa0
  vfs_write+0x103/0x260
  ksys_write+0x9d/0x130
  __x64_sys_write+0x4c/0x60
  do_syscall_64+0x91/0xb05
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

 5 locks held by fsync04/25724:
  #0: ffff99f9911093f8 (sb_writers#13){.+.+}, at: vfs_write+0x21c/0x260
  #1: ffff99f9db4c0348 (&sb->s_type->i_mutex_key#15){+.+.}, at: ext4_buffered_write_iter+0x65/0x210 [ext4]
  #2: ffff99f5e7dfcf58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2]
  #3: ffff99f9db4c0168 (&ei->i_data_sem){++++}, at: ext4_map_blocks+0x176/0x950 [ext4]
  #4: ffffffff99086b40 (rcu_read_lock){....}, at: jbd2_write_access_granted+0x4e/0x250 [jbd2]
 irq event stamp: 1407125
 hardirqs last  enabled at (1407125): [<ffffffff980da9b7>] __find_get_block+0x107/0x790
 hardirqs last disabled at (1407124): [<ffffffff980da8f9>] __find_get_block+0x49/0x790
 softirqs last  enabled at (1405528): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c
 softirqs last disabled at (1405521): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0

 Reported by Kernel Concurrency Sanitizer on:
 CPU: 68 PID: 25724 Comm: fsync04 Tainted: G L 5.6.0-rc2-next-20200221+ #7
 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019

The plain reads are outside of jh->b_state_lock critical section which result
in data races. Fix them by adding pairs of READ|WRITE_ONCE().
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200222043111.2227-1-cai@lca.pwSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Pull SCSI fixes from James Bottomley:
 "Four small fixes.

  Three are in drivers for fairly obvious bugs. The fourth is a set of
  regressions introduced by the compat_ioctl changes because some of the
  compat updates wrongly replaced .ioctl instead of .compat_ioctl"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: compat_ioctl: cdrom: Replace .ioctl with .compat_ioctl in four appropriate places
  scsi: zfcp: fix wrong data and display format of SFP+ temperature
  scsi: sd_sbc: Fix sd_zbc_report_zones()
  scsi: libfc: free response frame from GPN_ID

Pull PCI fixes from Bjorn Helgaas:

 - Fix build issue on 32-bit ARM with old compilers (Marek Szyprowski)

 - Update MAINTAINERS for recent Cadence driver file move (Lukas
   Bulwahn)

* tag 'pci-v5.6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  MAINTAINERS: Correct Cadence PCI driver path
  PCI: brcmstb: Fix build on 32bit ARM platforms with older compilers

Pull block fixes from Jens Axboe:

 - Passthrough insertion fix (Ming)

 - Kill off some unused arguments (John)

 - blktrace RCU fix (Jan)

 - Dead fields removal for null_blk (Dongli)

 - NVMe polled IO fix (Bijan)

* tag 'block-5.6-2020-02-28' of git://git.kernel.dk/linux-block:
  nvme-pci: Hold cq_poll_lock while completing CQEs
  blk-mq: Remove some unused function arguments
  null_blk: remove unused fields in 'nullb_cmd'
  blktrace: Protect q->blk_trace with RCU
  blk-mq: insert passthrough request into hctx->dispatch directly

Pull io_uring fixes from Jens Axboe:

 - Fix for a race with IOPOLL used with SQPOLL (Xiaoguang)

 - Only show ->fdinfo if procfs is enabled (Tobias)

 - Fix for a chain with multiple personalities in the SQEs

 - Fix for a missing free of personality idr on exit

 - Removal of the spin-for-work optimization

 - Fix for next work lookup on request completion

 - Fix for non-vec read/write result progation in case of links

 - Fix for a fileset references on switch

 - Fix for a recvmsg/sendmsg 32-bit compatability mode

* tag 'io_uring-5.6-2020-02-28' of git://git.kernel.dk/linux-block:
  io_uring: fix 32-bit compatability with sendmsg/recvmsg
  io_uring: define and set show_fdinfo only if procfs is enabled
  io_uring: drop file set ref put/get on switch
  io_uring: import_single_range() returns 0/-ERROR
  io_uring: pick up link work on submit reference drop
  io-wq: ensure work->task_pid is cleared on init
  io-wq: remove spin-for-work optimization
  io_uring: fix poll_list race for SETUP_IOPOLL|SETUP_SQPOLL
  io_uring: fix personality idr leak
  io_uring: handle multiple personalities in link chains

Pull NVMe fix from Keith.

* 'nvme-5.6-rc4' of git://git.infradead.org/nvme:
  nvme-pci: Hold cq_poll_lock while completing CQEs

Pull ACPI fixes from Rafael Wysocki:
 "Fix a couple of configuration issues in the ACPI watchdog (WDAT)
  driver (Mika Westerberg) and make it possible to disable that driver
  at boot time in case it still does not work as expected (Jean
  Delvare)"

* tag 'acpi-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: watchdog: Set default timeout in probe
  ACPI: watchdog: Fix gas->access_width usage
  ACPICA: Introduce ACPI_ACCESS_BYTE_WIDTH() macro
  ACPI: watchdog: Allow disabling WDAT at boot

Pull power management fixes from Rafael Wysocki:
 "Fix a recent cpufreq initialization regression (Rafael Wysocki),
  revert a devfreq commit that made incompatible changes and broke user
  land on some systems (Orson Zhai), drop a stale reference to a
  document that has gone away recently (Jonathan Neuschäfer), and fix a
  typo in a hibernation code comment (Alexandre Belloni)"

* tag 'pm-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: Fix policy initialization for internal governor drivers
  Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"
  PM / hibernate: fix typo "reserverd_size" -> "reserved_size"
  Documentation: power: Drop reference to interface.rst