- 29 Apr, 2018 4 commits
-
-
Imre Deak authored
commit 7eb2c4dd upstream. LSPCON adapters in low-power state may ignore the first I2C write during TMDS output buffer enabling, resulting in a blank screen even with an otherwise enabled pipe. Fix this by reading back and validating the written value a few times. The problem was noticed on GLK machines with an onboard LSPCON adapter after entering/exiting DC5 power state. Doing an I2C read of the adapter ID as the first transaction - instead of the I2C write to enable the TMDS buffers - returns the correct value. Based on this we assume that the transaction itself is sent properly, it's only the adapter that is not ready for some reason to accept this first write after waking from low-power state. In my case the second I2C write attempt always succeeded. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105854 Cc: Clinton Taylor <clinton.a.taylor@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180416155309.11100-1-imre.deak@intel.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Daniel J Blueman authored
commit c0db1b67 upstream. During BO teardown, an indirect list 'uniform_addr_offsets' wasn't being freed leading to leaking many 128B allocations. Fix the memory leak by releasing it at teardown time. Cc: stable@vger.kernel.org Fixes: 6d45c81d ("drm/vc4: Add support for branching in shader validation.") Signed-off-by:
Daniel J Blueman <daniel@quora.org> Signed-off-by:
Eric Anholt <eric@anholt.net> Reviewed-by:
-
Xiaoming Gao authored
commit d3878e16 upstream. The TSC calibration code uses HPET as reference. The conversion normalizes the delta of two HPET timestamps: hpetref = ((tshpet1 - tshpet2) * HPET_PERIOD) / 1e6 and then divides the normalized delta of the corresponding TSC timestamps by the result to calulate the TSC frequency. tscfreq = ((tstsc1 - tstsc2 ) * 1e6) / hpetref This uses do_div() which takes an u32 as the divisor, which worked so far because the HPET frequency was low enough that 'hpetref' never exceeded 32bit. On Skylake machines the HPET frequency increased so 'hpetref' can exceed 32bit. do_div() truncates the divisor, which causes the calibration to fail. Use div64_u64() to avoid the problem. [ tglx: Fixes whitespace mangled patch and rewrote changelog ] Signed-off-by:
Xiaoming Gao <newtongao@tencent.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Cc: peterz@infradead.org Cc: hpa@zytor.com Link: https://lkml.kernel.org/r/38894564-4fc9-b8ec-353f-de702839e44e@gmail.comSigned-off-by:
-
Steve French authored
commit 1d0cffa6 upstream. RHBZ: 1453123 Since at least the 3.10 kernel and likely a lot earlier we have not been able to create unix domain sockets in a cifs share when mounted using the SFU mount option (except when mounted with the cifs unix extensions to Samba e.g.) Trying to create a socket, for example using the af_unix command from xfstests will cause : BUG: unable to handle kernel NULL pointer dereference at 00000000 00000040 Since no one uses or depends on being able to create unix domains sockets on a cifs share the easiest fix to stop this vulnerability is to simply not allow creation of any other special files than char or block devices when sfu is used. Added update to Ronnie's patch to handle a tcon link leak, and to address a buf leak noticed by Gustavo and Colin. Acked-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> CC: Colin Ian King <colin.king@canonical.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Reported-by:
Eryu Guan <eguan@redhat.com> Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
- 24 Apr, 2018 36 commits
-
-
Greg Kroah-Hartman authored
-
Wanpeng Li authored
commit 51d638b1 upstream. This can be triggered by hot-unplug one cpu. ====================================================== [ INFO: possible circular locking dependency detected ] 4.11.0+ #17 Not tainted ------------------------------------------------------- step_after_susp/2640 is trying to acquire lock: (all_q_mutex){+.+...}, at: [<ffffffffb33f95b8>] blk_mq_queue_reinit_work+0x18/0x110 but task is already holding lock: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffffb306d04f>] cpu_hotplug_begin+0x7f/0xe0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (cpu_hotplug.lock){+.+.+.}: lock_acquire+0x11c/0x230 __mutex_lock+0x92/0x990 mutex_lock_nested+0x1b/0x20 get_online_cpus+0x64/0x80 blk_mq_init_allocated_queue+0x3a0/0x4e0 blk_mq_init_queue+0x3a/0x60 loop_add+0xe5/0x280 loop_init+0x124/0x177 do_one_initcall+0x53/0x1c0 kernel_init_freeable+0x1e3/0x27f kernel_init+0xe/0x100 ret_from_fork+0x31/0x40 -> #0 (all_q_mutex){+.+...}: __lock_acquire+0x189a/0x18a0 lock_acquire+0x11c/0x230 __mutex_lock+0x92/0x990 mutex_lock_nested+0x1b/0x20 blk_mq_queue_reinit_work+0x18/0x110 blk_mq_queue_reinit_dead+0x1c/0x20 cpuhp_invoke_callback+0x1f2/0x810 cpuhp_down_callbacks+0x42/0x80 _cpu_down+0xb2/0xe0 freeze_secondary_cpus+0xb6/0x390 suspend_devices_and_enter+0x3b3/0xa40 pm_suspend+0x129/0x490 state_store+0x82/0xf0 kobj_attr_store+0xf/0x20 sysfs_kf_write+0x45/0x60 kernfs_fop_write+0x135/0x1c0 __vfs_write+0x37/0x160 vfs_write+0xcd/0x1d0 SyS_write+0x58/0xc0 do_syscall_64+0x8f/0x710 return_from_SYSCALL_64+0x0/0x7a other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpu_hotplug.lock); lock(all_q_mutex); lock(cpu_hotplug.lock); lock(all_q_mutex); *** DEADLOCK *** 8 locks held by step_after_susp/2640: #0: (sb_writers#6){.+.+.+}, at: [<ffffffffb3244aed>] vfs_write+0x1ad/0x1d0 #1: (&of->mutex){+.+.+.}, at: [<ffffffffb32d3a51>] kernfs_fop_write+0x101/0x1c0 #2: (s_active#166){.+.+.+}, at: [<ffffffffb32d3a59>] kernfs_fop_write+0x109/0x1c0 #3: (pm_mutex){+.+...}, at: [<ffffffffb30d2ecd>] pm_suspend+0x21d/0x490 #4: (acpi_scan_lock){+.+.+.}, at: [<ffffffffb34dc3d7>] acpi_scan_lock_acquire+0x17/0x20 #5: (cpu_add_remove_lock){+.+.+.}, at: [<ffffffffb306d6d7>] freeze_secondary_cpus+0x27/0x390 #6: (cpu_hotplug.dep_map){++++++}, at: [<ffffffffb306cfd5>] cpu_hotplug_begin+0x5/0xe0 #7: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffffb306d04f>] cpu_hotplug_begin+0x7f/0xe0 stack backtrace: CPU: 3 PID: 2640 Comm: step_after_susp Not tainted 4.11.0+ #17 Hardware name: Dell Inc. OptiPlex 7040/0JCTF8, BIOS 1.4.9 09/12/2016 Call Trace: dump_stack+0x99/0xce print_circular_bug+0x1fa/0x270 __lock_acquire+0x189a/0x18a0 lock_acquire+0x11c/0x230 ? lock_acquire+0x11c/0x230 ? blk_mq_queue_reinit_work+0x18/0x110 ? blk_mq_queue_reinit_work+0x18/0x110 __mutex_lock+0x92/0x990 ? blk_mq_queue_reinit_work+0x18/0x110 ? kmem_cache_free+0x2cb/0x330 ? anon_transport_class_unregister+0x20/0x20 ? blk_mq_queue_reinit_work+0x110/0x110 mutex_lock_nested+0x1b/0x20 ? mutex_lock_nested+0x1b/0x20 blk_mq_queue_reinit_work+0x18/0x110 blk_mq_queue_reinit_dead+0x1c/0x20 cpuhp_invoke_callback+0x1f2/0x810 ? __flow_cache_shrink+0x160/0x160 cpuhp_down_callbacks+0x42/0x80 _cpu_down+0xb2/0xe0 freeze_secondary_cpus+0xb6/0x390 suspend_devices_and_enter+0x3b3/0xa40 ? rcu_read_lock_sched_held+0x79/0x80 pm_suspend+0x129/0x490 state_store+0x82/0xf0 kobj_attr_store+0xf/0x20 sysfs_kf_write+0x45/0x60 kernfs_fop_write+0x135/0x1c0 __vfs_write+0x37/0x160 ? rcu_read_lock_sched_held+0x79/0x80 ? rcu_sync_lockdep_assert+0x2f/0x60 ? __sb_start_write+0xd9/0x1c0 ? vfs_write+0x1ad/0x1d0 vfs_write+0xcd/0x1d0 SyS_write+0x58/0xc0 ? rcu_read_lock_sched_held+0x79/0x80 do_syscall_64+0x8f/0x710 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL64_slow_path+0x25/0x25 The cpu hotplug path will hold cpu_hotplug.lock and then reinit all exiting queues for blk mq w/ all_q_mutex, however, blk_mq_init_allocated_queue() will contend these two locks in the inversion order. This is due to commit eabe0659 (blk/mq: Cure cpu hotplug lock inversion), it fixes a cpu hotplug lock inversion issue because of hotplug rework, however the hotplug rework is still work-in-progress and lives in a -tip branch and mainline cannot yet trigger that splat. The commit breaks the linus's tree in the merge window, so this patch reverts the lock order and avoids to splat linus's tree. Cc: Jens Axboe <axboe@kernel.dk> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Cc: Thierry Escande <thierry.escande@linaro.org> Signed-off-by:
-
Greg Thelen authored
commit 2e898e4c upstream. lock_page_memcg()/unlock_page_memcg() use spin_lock_irqsave/restore() if the page's memcg is undergoing move accounting, which occurs when a process leaves its memcg for a new one that has memory.move_charge_at_immigrate set. unlocked_inode_to_wb_begin,end() use spin_lock_irq/spin_unlock_irq() if the given inode is switching writeback domains. Switches occur when enough writes are issued from a new domain. This existing pattern is thus suspicious: lock_page_memcg(page); unlocked_inode_to_wb_begin(inode, &locked); ... unlocked_inode_to_wb_end(inode, locked); unlock_page_memcg(page); If both inode switch and process memcg migration are both in-flight then unlocked_inode_to_wb_end() will unconditionally enable interrupts while still holding the lock_page_memcg() irq spinlock. This suggests the possibility of deadlock if an interrupt occurs before unlock_page_memcg(). truncate __cancel_dirty_page lock_page_memcg unlocked_inode_to_wb_begin unlocked_inode_to_wb_end <interrupts mistakenly enabled> <interrupt> end_page_writeback test_clear_page_writeback lock_page_memcg <deadlock> unlock_page_memcg Due to configuration limitations this deadlock is not currently possible because we don't mix cgroup writeback (a cgroupv2 feature) and memory.move_charge_at_immigrate (a cgroupv1 feature). If the kernel is hacked to always claim inode switching and memcg moving_account, then this script triggers lockup in less than a minute: cd /mnt/cgroup/memory mkdir a b echo 1 > a/memory.move_charge_at_immigrate echo 1 > b/memory.move_charge_at_immigrate ( echo $BASHPID > a/cgroup.procs while true; do dd if=/dev/zero of=/mnt/big bs=1M count=256 done ) & while true; do sync done & sleep 1h & SLEEP=$! while true; do echo $SLEEP > a/cgroup.procs echo $SLEEP > b/cgroup.procs done The deadlock does not seem possible, so it's debatable if there's any reason to modify the kernel. I suggest we should to prevent future surprises. And Wang Long said "this deadlock occurs three times in our environment", so there's more reason to apply this, even to stable. Stable 4.4 has minor conflicts applying this patch. For a clean 4.4 patch see "[PATCH for-4.4] writeback: safer lock nesting" https://lkml.org/lkml/2018/4/11/146 Wang Long said "this deadlock occurs three times in our environment" [gthelen@google.com: v4] Link: http://lkml.kernel.org/r/20180411084653.254724-1-gthelen@google.com [akpm@linux-foundation.org: comment tweaks, struct initialization simplification] Change-Id: Ibb773e8045852978f6207074491d262f1b3fb613 Link: http://lkml.kernel.org/r/20180410005908.167976-1-gthelen@google.com Fixes: 682aa8e1 ("writeback: implement unlocked_inode_to_wb transaction and use it for stat updates") Signed-off-by:
Greg Thelen <gthelen@google.com> Reported-by:
Wang Long <wanglong19@meituan.com> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: <stable@vger.kernel.org> [v4.2+] Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [natechancellor: Adjust context due to lack of b93b0163] Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Amir Goldstein authored
commit 54a307ba upstream. When event on child inodes are sent to the parent inode mark and parent inode mark was not marked with FAN_EVENT_ON_CHILD, the event will not be delivered to the listener process. However, if the same process also has a mount mark, the event to the parent inode will be delivered regadless of the mount mark mask. This behavior is incorrect in the case where the mount mark mask does not contain the specific event type. For example, the process adds a mark on a directory with mask FAN_MODIFY (without FAN_EVENT_ON_CHILD) and a mount mark with mask FAN_CLOSE_NOWRITE (without FAN_ONDIR). A modify event on a file inside that directory (and inside that mount) should not create a FAN_MODIFY event, because neither of the marks requested to get that event on the file. Fixes: 1968f5ee ("fanotify: use both marks when possible") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> [natechancellor: Fix small conflict due to lack of 3cd5eca8] Signed-off-by:
-
Matthew Wilcox authored
commit abc1be13 upstream. f2fs specifies the __GFP_ZERO flag for allocating some of its pages. Unfortunately, the page cache also uses the mapping's GFP flags for allocating radix tree nodes. It always masked off the __GFP_HIGHMEM flag, and masks off __GFP_ZERO in some paths, but not all. That causes radix tree nodes to be allocated with a NULL list_head, which causes backtraces like: __list_del_entry+0x30/0xd0 list_lru_del+0xac/0x1ac page_cache_tree_insert+0xd8/0x110 The __GFP_DMA and __GFP_DMA32 flags would also be able to sneak through if they are ever used. Fix them all by using GFP_RECLAIM_MASK at the innermost location, and remove it from earlier in the callchain. Link: http://lkml.kernel.org/r/20180411060320.14458-2-willy@infradead.org Fixes: 449dd698 ("mm: keep page cache radix tree nodes in check") Signed-off-by:
Matthew Wilcox <mawilcox@microsoft.com> Reported-by:
Chris Fries <cfries@google.com> Debugged-by:
Minchan Kim <minchan@kernel.org> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
-
Ian Kent authored
commit 1e630665 upstream. The autofs file system mkdir inode operation blindly sets the created directory mode to S_IFDIR | 0555, ingoring the passed in mode, which can cause selinux dac_override denials. But the function also checks if the caller is the daemon (as no-one else should be able to do anything here) so there's no point in not honouring the passed in mode, allowing the daemon to set appropriate mode when required. Link: http://lkml.kernel.org/r/152361593601.8051.14014139124905996173.stgit@pluto.themaw.netSigned-off-by:
Ian Kent <raven@themaw.net> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Al Viro authored
commit 16a34adb upstream. We want it only for the stuff created by SB_KERNMOUNT mounts, *not* for their copies. As it is, creating a deep stack of bindings of /proc/*/ns/* somewhere in a new namespace and exiting yields a stack overflow. Cc: stable@kernel.org Reported-by:
Alexander Aring <aring@mojatatu.com> Bisected-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Tested-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
commit 4a3877c4 upstream. if we ever hit rpc_gssd_dummy_depopulate() dentry passed to it has refcount equal to 1. __rpc_rmpipe() drops it and dput() done after that hits an already freed dentry. Cc: stable@kernel.org Signed-off-by:
-
Al Viro authored
commit 65903842 upstream. orangefs_fill_sb() might've failed to allocate ORANGEFS_SB(s); don't oops in that case. Cc: stable@kernel.org Signed-off-by:
-
Al Viro authored
commit a24cd490 upstream. hypfs_fill_super() might fail to allocate sbi; hypfs_kill_super() should not oops on that. Cc: stable@vger.kernel.org Signed-off-by:
-
Al Viro authored
commit c66b23c2 upstream. jffs2_fill_super() might fail to allocate jffs2_sb_info; jffs2_kill_sb() must survive that. Cc: stable@kernel.org Signed-off-by:
-
Jan Kara authored
commit 44f06ba8 upstream. OSTA UDF specification does not mention whether the CS0 charset in case of two bytes per character encoding should be treated in UTF-16 or UCS-2. The sample code in the standard does not treat UTF-16 surrogates in any special way but on systems such as Windows which work in UTF-16 internally, filenames would be treated as being in UTF-16 effectively. In Linux it is more difficult to handle characters outside of Base Multilingual plane (beyond 0xffff) as NLS framework works with 2-byte characters only. Just make sure we don't leak UTF-16 surrogates into the resulting string when loading names from the filesystem for now. CC: stable@vger.kernel.org # >= v4.6 Reported-by:
Mingye Wang <arthur200126@gmail.com> Signed-off-by:
-
Michael Ellerman authored
commit b8858581 upstream. When we patch an alternate feature section, we have to adjust any relative branches that branch out of the alternate section. But currently we have a bug if we have a branch that points to past the last instruction of the alternate section, eg: FTR_SECTION_ELSE 1: b 2f or 6,6,6 2: ALT_FTR_SECTION_END(...) nop This will result in a relative branch at 1 with a target that equals the end of the alternate section. That branch does not need adjusting when it's moved to the non-else location. Currently we do adjust it, resulting in a branch that goes off into the link-time location of the else section, which is junk. The fix is to not patch branches that have a target == end of the alternate section. Fixes: d20fe50a ("KVM: PPC: Book3S HV: Branch inside feature section") Fixes: 9b1a735d ("powerpc: Add logic to patch alternative feature sections") Cc: stable@vger.kernel.org # v2.6.27+ Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Michael Neuling authored
commit 13a83eac upstream. On boot we save the configuration space of PCIe bridges. We do this so when we get an EEH event and everything gets reset that we can restore them. Unfortunately we save this state before we've enabled the MMIO space on the bridges. Hence if we have to reset the bridge when we come back MMIO is not enabled and we end up taking an PE freeze when the driver starts accessing again. This patch forces the memory/MMIO and bus mastering on when restoring bridges on EEH. Ideally we'd do this correctly by saving the configuration space writes later, but that will have to come later in a larger EEH rewrite. For now we have this simple fix. The original bug can be triggered on a boston machine by doing: echo 0x8000000000000000 > /sys/kernel/debug/powerpc/PCI0001/err_injct_outbound On boston, this PHB has a PCIe switch on it. Without this patch, you'll see two EEH events, 1 expected and 1 the failure we are fixing here. The second EEH event causes the anything under the PHB to disappear (i.e. the i40e eth). With this patch, only 1 EEH event occurs and devices properly recover. Fixes: 652defed ("powerpc/eeh: Check PCIe link after reset") Cc: stable@vger.kernel.org # v3.11+ Reported-by:
Pridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com> Signed-off-by:
Michael Neuling <mikey@neuling.org> Acked-by:
Russell Currey <ruscur@russell.cc> Signed-off-by:
-
Matt Redfearn authored
commit c96eebf0 upstream. The label .Llast_fixup\@ is jumped to on page fault within the final byte set loop of memset (on < MIPSR6 architectures). For some reason, in this fault handler, the v1 register is randomly set to a2 & STORMASK. This clobbers v1 for the calling function. This can be observed with the following test code: static int __init __attribute__((optimize("O0"))) test_clear_user(void) { register int t asm("v1"); char *test; int j, k; pr_info("\n\n\nTesting clear_user\n"); test = vmalloc(PAGE_SIZE); for (j = 256; j < 512; j++) { t = 0xa5a5a5a5; if ((k = clear_user(test + PAGE_SIZE - 256, j)) != j - 256) { pr_err("clear_user (%px %d) returned %d\n", test + PAGE_SIZE - 256, j, k); } if (t != 0xa5a5a5a5) { pr_err("v1 was clobbered to 0x%x!\n", t); } } return 0; } late_initcall(test_clear_user); Which demonstrates that v1 is indeed clobbered (MIPS64): Testing clear_user v1 was clobbered to 0x1! v1 was clobbered to 0x2! v1 was clobbered to 0x3! v1 was clobbered to 0x4! v1 was clobbered to 0x5! v1 was clobbered to 0x6! v1 was clobbered to 0x7! Since the number of bytes that could not be set is already contained in a2, the andi placing a value in v1 is not necessary and actively harmful in clobbering v1. Reported-by:
James Hogan <jhogan@kernel.org> Signed-off-by:
Matt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/19109/Signed-off-by:
-
Matt Redfearn authored
commit daf70d89 upstream. The __clear_user function is defined to return the number of bytes that could not be cleared. From the underlying memset / bzero implementation this means setting register a2 to that number on return. Currently if a page fault is triggered within the memset_partial block, the value loaded into a2 on return is meaningless. The label .Lpartial_fixup\@ is jumped to on page fault. In order to work out how many bytes failed to copy, the exception handler should find how many bytes left in the partial block (andi a2, STORMASK), add that to the partial block end address (a2), and subtract the faulting address to get the remainder. Currently it incorrectly subtracts the partial block start address (t1), which has additionally been clobbered to generate a jump target in memset_partial. Fix this by adding the block end address instead. This issue was found with the following test code: int j, k; for (j = 0; j < 512; j++) { if ((k = clear_user(NULL, j)) != j) { pr_err("clear_user (NULL %d) returned %d\n", j, k); } } Which now passes on Creator Ci40 (MIPS32) and Cavium Octeon II (MIPS64). Suggested-by:
-
Matt Redfearn authored
commit 8a8158c8 upstream. The MIPS kernel memset / bzero implementation includes a small_memset branch which is used when the region to be set is smaller than a long (4 bytes on 32bit, 8 bytes on 64bit). The current small_memset implementation uses a simple store byte loop to write the destination. There are 2 issues with this implementation: 1. When EVA mode is active, user and kernel address spaces may overlap. Currently the use of the sb instruction means kernel mode addressing is always used and an intended write to userspace may actually overwrite some critical kernel data. 2. If the write triggers a page fault, for example by calling __clear_user(NULL, 2), instead of gracefully handling the fault, an OOPS is triggered. Fix these issues by replacing the sb instruction with the EX() macro, which will emit EVA compatible instuctions as required. Additionally implement a fault fixup for small_memset which sets a2 to the number of bytes that could not be cleared (as defined by __clear_user). Reported-by:
Chuanhua Lei <chuanhua.lei@intel.com> Signed-off-by:
-
Matt Redfearn authored
commit b3d7e55c upstream. The micromips implementation of bzero additionally clobbers registers t7 & t8. Specify this in the clobbers list when invoking bzero. Fixes: 26c5e07d ("MIPS: microMIPS: Optimise 'memset' core library function.") Reported-by:
-
Rodrigo Rivas Costa authored
commit a955358d upstream. Doing `ioctl(HIDIOCGFEATURE)` in a tight loop on a hidraw device and then disconnecting the device, or unloading the driver, can cause a NULL pointer dereference. When a hidraw device is destroyed it sets 0 to `dev->exist`. Most functions check 'dev->exist' before doing its work, but `hidraw_get_report()` was missing that check. Cc: stable@vger.kernel.org Signed-off-by:
Rodrigo Rivas Costa <rodrigorivascosta@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Theodore Ts'o authored
commit d848e5f8 upstream. Add a new ioctl which forces the the crng to be reseeded. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
-
Theodore Ts'o authored
commit 0bb29a84 upstream. Reported-by:
Jann Horn <jannh@google.com> Fixes: 1e7f583a ("random: make /dev/urandom scalable for silly...") Cc: stable@kernel.org # 4.8+ Signed-off-by:
-
Theodore Ts'o authored
commit 43838a23 upstream. The crng_init variable has three states: 0: The CRNG is not initialized at all 1: The CRNG has a small amount of entropy, hopefully good enough for early-boot, non-cryptographical use cases 2: The CRNG is fully initialized and we are sure it is safe for cryptographic use cases. The crng_ready() function should only return true once we are in the last state. This addresses CVE-2018-1108. Reported-by:
-
David Wang authored
commit af52f998 upstream. This patch is used to tell kernel that new VIA HDAC controller also support no-snoop path. [ minor coding style fix by tiwai ] Signed-off-by:
David Wang <davidwang@zhaoxin.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 8a56ef4f upstream. Some rawmidi compat ioctls lack of the input substream checks (although they do check only for rfile->output). This many eventually lead to an Oops as NULL substream is passed to the rawmidi core functions. Fix it by adding the proper checks before each function call. The bug was spotted by syzkaller. Reported-by: syzbot+f7a0348affc3b67bc617@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Fabián Inostroza authored
commit 7ecb46e9 upstream. Sending MIDI messages to a PODxt through the USB connection shows "usb_submit_urb failed" in dmesg and the message is not received by the POD. The error is caused because in the funcion send_midi_async() in midi.c there is a call to usb_sndbulkpipe() for endpoint 3 OUT, but the PODxt USB descriptor shows that this endpoint it's an interrupt endpoint. Patch tested with PODxt only. [ The bug has been present from the very beginning in the staging driver time, but Fixes below points to the commit moving to sound/ directory so that the fix can be cleanly applied -- tiwai ] Fixes: 61864d84 ("ALSA: move line6 usb driver into sound/usb") Signed-off-by:
Fabián Inostroza <fabianinostroza@udec.cl> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Paul Parsons authored
commit 85e290d9 upstream. Two years ago I tried an AMD Radeon E8860 embedded GPU with the drm driver. The dmesg output included driver warnings about an invalid PCIe lane width. Tracking the problem back led to si_set_pcie_lane_width_in_smc(). The calculation of the lane widths via ATOM_PPLIB_PCIE_LINK_WIDTH_MASK and ATOM_PPLIB_PCIE_LINK_WIDTH_SHIFT macros did not increment the resulting value, per the comment in pptable.h ("lanes - 1"), and per usage elsewhere. Applying the increment silenced the warnings. The code has not changed since, so either my analysis was incorrect or the bug has gone unnoticed. Hence submitting this as an RFC. Acked-by:
Christian König <christian.koenig@amd.com> Acked-by:
Chunming Zhou <david1.zhou@amd.com> Signed-off-by:
Paul Parsons <lost.distance@yahoo.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Marc Zyngier authored
commit 5f9e93fe upstream. Calling request_irq() followed by disable_irq() is usually a bad idea, specially if the interrupt can be pending, and you're not yet in a position to handle it. This is exactly what happens on my kevin system when rebooting in a second kernel using kexec: Some interrupt is left pending from the previous kernel, and we take it too early, before disable_irq() could do anything. Let's clear the pending interrupts as we initialize the HW, and move the interrupt request after that point. This ensures that we're in a sane state when the interrupt is requested. Cc: stable@vger.kernel.org Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> [adapted to recent rockchip-drm changes] Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180220130120.5254-2-marc.zyngier@arm.comSigned-off-by:
-
Alex Deucher authored
commit 41212e2f upstream. The calculation of the lane widths via ATOM_PPLIB_PCIE_LINK_WIDTH_MASK and ATOM_PPLIB_PCIE_LINK_WIDTH_SHIFT macros did not increment the resulting value, per the comment in pptable.h ("lanes - 1"), and per usage elsewhere. Port of the radeon fix to amdgpu. Acked-by:
-
Bas Nieuwenhuizen authored
commit a20ee0b1 upstream. If these bos are evicted and are in the validated list things blow up, so do not put them in there. Notably, that tries to add the bo to the LRU twice, which results in a BUG_ON in ttm_bo.c. While for the bo_list an alternative would be to not allow always valid bos in there, that does not work for the user fence. v2: Fixed whitespace issue pointed out by checkpatch.pl Signed-off-by:
Bas Nieuwenhuizen <basni@chromium.org> Reviewed-by:
-
Alex Deucher authored
commit 13b40935 upstream. _PR3 doesn't seem to work properly, use ATPX instead. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=104064Reviewed-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Theodore Ts'o authored
commit 18db4b4e upstream. If some metadata block, such as an allocation bitmap, overlaps the superblock, it's very likely that if the file system is mounted read/write, the results will not be pretty. So disallow r/w mounts for file systems corrupted in this particular way. Backport notes: 3.18.y is missing bc98a42c ("VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)") and e462ec50 ("VFS: Differentiate mount flags (MS_*) from internal superblock flags") so we simply use the sb MS_RDONLY check from pre bc98a42c in place of the sb_rdonly function used in the upstream variant of the patch. Signed-off-by:
Harsh Shandilya <harsh@prjkt.io> Signed-off-by:
-
Takashi Iwai authored
commit e15dc99d upstream. The commit 02a5d692 ("ALSA: pcm: Avoid potential races between OSS ioctls and read/write") split the PCM preparation code to a locked version, and it added a sanity check of runtime->oss.prepare flag along with the change. This leaded to an endless loop when the stream gets XRUN: namely, snd_pcm_oss_write3() and co call snd_pcm_oss_prepare() without setting runtime->oss.prepare flag and the loop continues until the PCM state reaches to another one. As the function is supposed to execute the preparation unconditionally, drop the invalid state check there. The bug was triggered by syzkaller. Fixes: 02a5d692 ("ALSA: pcm: Avoid potential races between OSS ioctls and read/write") Reported-by: syzbot+150189c103427d31a053@syzkaller.appspotmail.com Reported-by: syzbot+7e3f31a52646f939c052@syzkaller.appspotmail.com Reported-by: syzbot+4f2016cf5185da7759dc@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit f6d297df upstream. The previous fix 40cab6e8 ("ALSA: pcm: Return -EBUSY for OSS ioctls changing busy streams") introduced some mutex unbalance; the check of runtime->oss.rw_ref was inserted in a wrong place after the mutex lock. This patch fixes the inconsistency by rewriting with the helper functions to lock/unlock parameters with the stream check. Fixes: 40cab6e8 ("ALSA: pcm: Return -EBUSY for OSS ioctls changing busy streams") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 40cab6e8 upstream. OSS PCM stream management isn't modal but it allows ioctls issued at any time for changing the parameters. In the previous hardening patch ("ALSA: pcm: Avoid potential races between OSS ioctls and read/write"), we covered these races and prevent the corruption by protecting the concurrent accesses via params_lock mutex. However, this means that some ioctls that try to change the stream parameter (e.g. channels or format) would be blocked until the read/write finishes, and it may take really long. Basically changing the parameter while reading/writing is an invalid operation, hence it's even more user-friendly from the API POV if it returns -EBUSY in such a situation. This patch adds such checks in the relevant ioctls with the addition of read/write access refcount. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 02a5d692 upstream. Although we apply the params_lock mutex to the whole read and write operations as well as snd_pcm_oss_change_params(), we may still face some races. First off, the params_lock is taken inside the read and write loop. This is intentional for avoiding the too long locking, but it allows the in-between parameter change, which might lead to invalid pointers. We check the readiness of the stream and set up via snd_pcm_oss_make_ready() at the beginning of read and write, but it's called only once, by assuming that it remains ready in the rest. Second, many ioctls that may change the actual parameters (i.e. setting runtime->oss.params=1) aren't protected, hence they can be processed in a half-baked state. This patch is an attempt to plug these holes. The stream readiness check is moved inside the read/write inner loop, so that the stream is always set up in a proper state before further processing. Also, each ioctl that may change the parameter is wrapped with the params_lock for avoiding the races. The issues were triggered by syzkaller in a few different scenarios, particularly the one below appearing as GPF in loopback_pos_update. Reported-by: syzbot+c4227aec125487ec3efa@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit c64ed5dd upstream. Fix the last standing EINTR in the whole subsystem. Use more correct ERESTARTSYS for pending signals. Signed-off-by:
-
