- 15 Sep, 2018 40 commits
-
-
Nikolay Aleksandrov authored
commit e89d469e upstream. The below commit added a call to ->destroy() on init failure, but multiq still frees ->queues on error in init, but ->queues is also freed by ->destroy() thus we get double free and corrupted memory. Very easy to reproduce (eth0 not multiqueue): $ tc qdisc add dev eth0 root multiq RTNETLINK answers: Operation not supported $ ip l add dumdum type dummy (crash) Trace log: [ 3929.467747] general protection fault: 0000 [#1] SMP [ 3929.468083] Modules linked in: [ 3929.468302] CPU: 3 PID: 967 Comm: ip Not tainted 4.13.0-rc6+ #56 [ 3929.468625] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 3929.469124] task: ffff88003716a700 task.stack: ffff88005872c000 [ 3929.469449] RIP: 0010:__kmalloc_track_caller+0x117/0x1be [ 3929.469746] RSP: 0018:ffff88005872f6a0 EFLAGS: 00010246 [ 3929.470042] RAX: 00000000000002de RBX: 0000000058a59000 RCX: 00000000000002df [ 3929.470406] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff821f7020 [ 3929.470770] RBP: ffff88005872f6e8 R08: 000000000001f010 R09: 0000000000000000 [ 3929.471133] R10: ffff88005872f730 R11: 0000000000008cdd R12: ff006d75646d7564 [ 3929.471496] R13: 00000000014000c0 R14: ffff88005b403c00 R15: ffff88005b403c00 [ 3929.471869] FS: 00007f0b70480740(0000) GS:ffff88005d980000(0000) knlGS:0000000000000000 [ 3929.472286] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3929.472677] CR2: 00007ffcee4f3000 CR3: 0000000059d45000 CR4: 00000000000406e0 [ 3929.473209] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3929.474109] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3929.474873] Call Trace: [ 3929.475337] ? kstrdup_const+0x23/0x25 [ 3929.475863] kstrdup+0x2e/0x4b [ 3929.476338] kstrdup_const+0x23/0x25 [ 3929.478084] __kernfs_new_node+0x28/0xbc [ 3929.478478] kernfs_new_node+0x35/0x55 [ 3929.478929] kernfs_create_link+0x23/0x76 [ 3929.479478] sysfs_do_create_link_sd.isra.2+0x85/0xd7 [ 3929.480096] sysfs_create_link+0x33/0x35 [ 3929.480649] device_add+0x200/0x589 [ 3929.481184] netdev_register_kobject+0x7c/0x12f [ 3929.481711] register_netdevice+0x373/0x471 [ 3929.482174] rtnl_newlink+0x614/0x729 [ 3929.482610] ? rtnl_newlink+0x17f/0x729 [ 3929.483080] rtnetlink_rcv_msg+0x188/0x197 [ 3929.483533] ? rcu_read_unlock+0x3e/0x5f [ 3929.483984] ? rtnl_newlink+0x729/0x729 [ 3929.484420] netlink_rcv_skb+0x6c/0xce [ 3929.484858] rtnetlink_rcv+0x23/0x2a [ 3929.485291] netlink_unicast+0x103/0x181 [ 3929.485735] netlink_sendmsg+0x326/0x337 [ 3929.486181] sock_sendmsg_nosec+0x14/0x3f [ 3929.486614] sock_sendmsg+0x29/0x2e [ 3929.486973] ___sys_sendmsg+0x209/0x28b [ 3929.487340] ? do_raw_spin_unlock+0xcd/0xf8 [ 3929.487719] ? _raw_spin_unlock+0x27/0x31 [ 3929.488092] ? __handle_mm_fault+0x651/0xdb1 [ 3929.488471] ? check_chain_key+0xb0/0xfd [ 3929.488847] __sys_sendmsg+0x45/0x63 [ 3929.489206] ? __sys_sendmsg+0x45/0x63 [ 3929.489576] SyS_sendmsg+0x19/0x1b [ 3929.489901] entry_SYSCALL_64_fastpath+0x23/0xc2 [ 3929.490172] RIP: 0033:0x7f0b6fb93690 [ 3929.490423] RSP: 002b:00007ffcee4ed588 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 3929.490881] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007f0b6fb93690 [ 3929.491198] RDX: 0000000000000000 RSI: 00007ffcee4ed5d0 RDI: 0000000000000003 [ 3929.491521] RBP: ffff88005872ff98 R08: 0000000000000001 R09: 0000000000000000 [ 3929.491801] R10: 00007ffcee4ed350 R11: 0000000000000246 R12: 0000000000000002 [ 3929.492075] R13: 000000000066f1a0 R14: 00007ffcee4f5680 R15: 0000000000000000 [ 3929.492352] ? trace_hardirqs_off_caller+0xa7/0xcf [ 3929.492590] Code: 8b 45 c0 48 8b 45 b8 74 17 48 8b 4d c8 83 ca ff 44 89 ee 4c 89 f7 e8 83 ca ff ff 49 89 c4 eb 49 49 63 56 20 48 8d 48 01 4d 8b 06 <49> 8b 1c 14 48 89 c2 4c 89 e0 65 49 0f c7 08 0f 94 c0 83 f0 01 [ 3929.493335] RIP: __kmalloc_track_caller+0x117/0x1be RSP: ffff88005872f6a0 Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation") Fixes: f07d1501 ("multiq: Further multiqueue cleanup") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net> [AmitP: Removed unused variable 'err' in multiq_init()] Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nikolay Aleksandrov authored
commit 88c2ace6 upstream. The commit below added a call to the ->destroy() callback for all qdiscs which failed in their ->init(), but some were not prepared for such change and can't handle partially initialized qdisc. HTB is one of them and if any error occurs before the qdisc watchdog timer and qdisc work are initialized then we can hit either a null ptr deref (timer->base) when canceling in ->destroy or lockdep error info about trying to register a non-static key and a stack dump. So to fix these two move the watchdog timer and workqueue init before anything that can err out. To reproduce userspace needs to send broken htb qdisc create request, tested with a modified tc (q_htb.c). Trace log: [ 2710.897602] BUG: unable to handle kernel NULL pointer dereference at (null) [ 2710.897977] IP: hrtimer_active+0x17/0x8a [ 2710.898174] PGD 58fab067 [ 2710.898175] P4D 58fab067 [ 2710.898353] PUD 586c0067 [ 2710.898531] PMD 0 [ 2710.898710] [ 2710.899045] Oops: 0000 [#1] SMP [ 2710.899232] Modules linked in: [ 2710.899419] CPU: 1 PID: 950 Comm: tc Not tainted 4.13.0-rc6+ #54 [ 2710.899646] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 2710.900035] task: ffff880059ed2700 task.stack: ffff88005ad4c000 [ 2710.900262] RIP: 0010:hrtimer_active+0x17/0x8a [ 2710.900467] RSP: 0018:ffff88005ad4f960 EFLAGS: 00010246 [ 2710.900684] RAX: 0000000000000000 RBX: ffff88003701e298 RCX: 0000000000000000 [ 2710.900933] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88003701e298 [ 2710.901177] RBP: ffff88005ad4f980 R08: 0000000000000001 R09: 0000000000000001 [ 2710.901419] R10: ffff88005ad4f800 R11: 0000000000000400 R12: 0000000000000000 [ 2710.901663] R13: ffff88003701e298 R14: ffffffff822a4540 R15: ffff88005ad4fac0 [ 2710.901907] FS: 00007f2f5e90f740(0000) GS:ffff88005d880000(0000) knlGS:0000000000000000 [ 2710.902277] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2710.902500] CR2: 0000000000000000 CR3: 0000000058ca3000 CR4: 00000000000406e0 [ 2710.902744] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2710.902977] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2710.903180] Call Trace: [ 2710.903332] hrtimer_try_to_cancel+0x1a/0x93 [ 2710.903504] hrtimer_cancel+0x15/0x20 [ 2710.903667] qdisc_watchdog_cancel+0x12/0x14 [ 2710.903866] htb_destroy+0x2e/0xf7 [ 2710.904097] qdisc_create+0x377/0x3fd [ 2710.904330] tc_modify_qdisc+0x4d2/0x4fd [ 2710.904511] rtnetlink_rcv_msg+0x188/0x197 [ 2710.904682] ? rcu_read_unlock+0x3e/0x5f [ 2710.904849] ? rtnl_newlink+0x729/0x729 [ 2710.905017] netlink_rcv_skb+0x6c/0xce [ 2710.905183] rtnetlink_rcv+0x23/0x2a [ 2710.905345] netlink_unicast+0x103/0x181 [ 2710.905511] netlink_sendmsg+0x326/0x337 [ 2710.905679] sock_sendmsg_nosec+0x14/0x3f [ 2710.905847] sock_sendmsg+0x29/0x2e [ 2710.906010] ___sys_sendmsg+0x209/0x28b [ 2710.906176] ? do_raw_spin_unlock+0xcd/0xf8 [ 2710.906346] ? _raw_spin_unlock+0x27/0x31 [ 2710.906514] ? __handle_mm_fault+0x651/0xdb1 [ 2710.906685] ? check_chain_key+0xb0/0xfd [ 2710.906855] __sys_sendmsg+0x45/0x63 [ 2710.907018] ? __sys_sendmsg+0x45/0x63 [ 2710.907185] SyS_sendmsg+0x19/0x1b [ 2710.907344] entry_SYSCALL_64_fastpath+0x23/0xc2 Note that probably this bug goes further back because the default qdisc handling always calls ->destroy on init failure too. Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation") Fixes: 0fbbeb1b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chas Williams authored
Commit 2aa6d036 ("mm: numa: avoid waiting on freed migrated pages") was an incomplete backport of the upstream commit. It is necessary to always reset page_nid before attempting any early exit. The original commit conflicted due to lack of commit 82b0f8c3 ("mm: join struct fault_env and vm_fault") in 4.9 so it wasn't a clean application, and the change must have just gotten lost in the noise. Signed-off-by:
Chas Williams <chas3@att.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Govindarajulu Varadarajan authored
commit cb5c6568 upstream. In commit ab123fe0 ("enic: handle mtu change for vf properly") ASSERT_RTNL() is added to _enic_change_mtu() to prevent it from being called without rtnl held. enic_probe() calls enic_change_mtu() without rtnl held. At this point netdev is not registered yet. Remove call to enic_change_mtu and assign the mtu to netdev->mtu. Fixes: ab123fe0 ("enic: handle mtu change for vf properly") Signed-off-by:
Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Fabio Estevam authored
This reverts commit 72147614. This commit causes reboot to fail on imx6 wandboard, so let's revert it. Cc: <stable@vger.kernel.org> #4.9 Reported-by:
Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tyler Hicks authored
The irda_setsockopt() function conditionally allocates memory for a new self->ias_object or, in some cases, reuses the existing self->ias_object. Existing objects were incorrectly reinserted into the LM_IAS database which corrupted the doubly linked list used for the hashbin implementation of the LM_IAS database. When combined with a memory leak in irda_bind(), this issue could be leveraged to create a use-after-free vulnerability in the hashbin list. This patch fixes the issue by only inserting newly allocated objects into the database. CVE-2018-6555 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Reviewed-by:
Seth Arnold <seth.arnold@canonical.com> Reviewed-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tyler Hicks authored
The irda_bind() function allocates memory for self->ias_obj without checking to see if the socket is already bound. A userspace process could repeatedly bind the socket, have each new object added into the LM-IAS database, and lose the reference to the old object assigned to the socket to exhaust memory resources. This patch errors out of the bind operation when self->ias_obj is already assigned. CVE-2018-6554 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Reviewed-by:
Seth Arnold <seth.arnold@canonical.com> Reviewed-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Randy Dunlap authored
commit 914b087f upstream. When $DEPMOD is not found, only print a warning instead of exiting with an error message and error status: Warning: 'make modules_install' requires /sbin/depmod. Please install it. This is probably in the kmod package. Change the Error to a Warning because "not all build hosts for cross compiling Linux are Linux systems and are able to provide a working port of depmod, especially at the file patch /sbin/depmod." I.e., "make modules_install" may be used to copy/install the loadable modules files to a target directory on a build system and then transferred to an embedded device where /sbin/depmod is run instead of it being run on the build system. Fixes: 934193a6 ("kbuild: verify that $DEPMOD is installed") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
H. Nikolaus Schaller <hns@goldelico.com> Cc: stable@vger.kernel.org Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Jessica Yu <jeyu@kernel.org> Cc: Chih-Wei Huang <cwhuang@linux.org.tw> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Maxim Zhukov <mussitantesmortem@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Juergen Gross authored
commit b2d7a075 upstream. Using only 32-bit writes for the pte will result in an intermediate L1TF vulnerable PTE. When running as a Xen PV guest this will at once switch the guest to shadow mode resulting in a loss of performance. Use arch_atomic64_xchg() instead which will perform the requested operation atomically with all 64 bits. Some performance considerations according to: https://software.intel.com/sites/default/files/managed/ad/dc/Intel-Xeon-Scalable-Processor-throughput-latency.pdf The main number should be the latency, as there is no tight loop around native_ptep_get_and_clear(). "lock cmpxchg8b" has a latency of 20 cycles, while "lock xchg" (with a memory operand) isn't mentioned in that document. "lock xadd" (with xadd having 3 cycles less latency than xchg) has a latency of 11, so we can assume a latency of 14 for "lock xchg". Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Jan Beulich <jbeulich@suse.com> Tested-by:
Jason Andryuk <jandryuk@gmail.com> Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> [ Atomic operations gained an arch_ prefix in 8bf705d1 ("locking/atomic/x86: Switch atomic.h to use atomic-instrumented.h") so s/arch_atomic64_xchg/atomic64_xchg/ for backport.] Signed-off-by:
Jason Andryuk <jandryuk@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Joel Fernandes (Google) authored
commit fc91a3c4 upstream. While debugging an issue debugobject tracking warned about an annotation issue of an object on stack. It turned out that the issue was due to the object in concern being on a different stack which was due to another issue. Thomas suggested to print the pointers and the location of the stack for the currently running task. This helped to figure out that the object was on the wrong stack. As this is general useful information for debugging similar issues, make the error message more informative by printing the pointers. [ tglx: Massaged changelog ] Signed-off-by:
Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Waiman Long <longman@redhat.com> Acked-by:
Yang Shi <yang.shi@linux.alibaba.com> Cc: kernel-team@android.com Cc: Arnd Bergmann <arnd@arndb.de> Cc: astrachan@google.com Link: https://lkml.kernel.org/r/20180723212531.202328-1-joel@joelfernandes.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
commit 29869d66 upstream. This reverts commit e70ac171. jtcp_rcv_established() is in fact called with hard irq being disabled. Initial bug report from Ricardo Nabinger Sanchez [1] still needs to be investigated, but does not look like a TCP bug. [1] https://www.spinics.net/lists/netdev/msg420960.htmlSigned-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
kernel test robot <xiaolong.ye@intel.com> Cc: Ricardo Nabinger Sanchez <rnsanchez@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kai-Heng Feng authored
commit 25da7504 upstream. Another panel that reports "DFP 1.x compliant TMDS" but it supports 6bpc instead of 8 bpc. Apply 6 bpc quirk for the panel to fix it. BugLink: https://bugs.launchpad.net/bugs/1788308 Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180823055332.7723-1-kai.heng.feng@canonical.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marc Zyngier authored
[ Upstream commit d1558dfd ] A number of the Rockchip-specific drivers (IOMMU, display controllers) are now assuming that CONFIG_PM is set, and may completely misbehave if that's not the case. Since there is hardly any reason for this configuration option not to be selected anyway, let's require it (in the same way Tegra already does). Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marc Zyngier authored
[ Upstream commit 7db7a8f5 ] A number of the Rockchip-specific drivers (IOMMU, display controllers) are now assuming that CONFIG_PM is set, and may completely misbehave if that's not the case. Since there is hardly any reason for this configuration option not to be selected anyway, let's require it (in the same way Tegra already does). Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Qu Wenruo authored
[ Upstream commit 43794446 ] [BUG] Under certain KVM load and LTP tests, it is possible to hit the following calltrace if quota is enabled: BTRFS critical (device vda2): unable to find logical 8820195328 length 4096 BTRFS critical (device vda2): unable to find logical 8820195328 length 4096 WARNING: CPU: 0 PID: 49 at ../block/blk-core.c:172 blk_status_to_errno+0x1a/0x30 CPU: 0 PID: 49 Comm: kworker/u2:1 Not tainted 4.12.14-15-default #1 SLE15 (unreleased) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs] task: ffff9f827b340bc0 task.stack: ffffb4f8c0304000 RIP: 0010:blk_status_to_errno+0x1a/0x30 Call Trace: submit_extent_page+0x191/0x270 [btrfs] ? btrfs_create_repair_bio+0x130/0x130 [btrfs] __do_readpage+0x2d2/0x810 [btrfs] ? btrfs_create_repair_bio+0x130/0x130 [btrfs] ? run_one_async_done+0xc0/0xc0 [btrfs] __extent_read_full_page+0xe7/0x100 [btrfs] ? run_one_async_done+0xc0/0xc0 [btrfs] read_extent_buffer_pages+0x1ab/0x2d0 [btrfs] ? run_one_async_done+0xc0/0xc0 [btrfs] btree_read_extent_buffer_pages+0x94/0xf0 [btrfs] read_tree_block+0x31/0x60 [btrfs] read_block_for_search.isra.35+0xf0/0x2e0 [btrfs] btrfs_search_slot+0x46b/0xa00 [btrfs] ? kmem_cache_alloc+0x1a8/0x510 ? btrfs_get_token_32+0x5b/0x120 [btrfs] find_parent_nodes+0x11d/0xeb0 [btrfs] ? leaf_space_used+0xb8/0xd0 [btrfs] ? btrfs_leaf_free_space+0x49/0x90 [btrfs] ? btrfs_find_all_roots_safe+0x93/0x100 [btrfs] btrfs_find_all_roots_safe+0x93/0x100 [btrfs] btrfs_find_all_roots+0x45/0x60 [btrfs] btrfs_qgroup_trace_extent_post+0x20/0x40 [btrfs] btrfs_add_delayed_data_ref+0x1a3/0x1d0 [btrfs] btrfs_alloc_reserved_file_extent+0x38/0x40 [btrfs] insert_reserved_file_extent.constprop.71+0x289/0x2e0 [btrfs] btrfs_finish_ordered_io+0x2f4/0x7f0 [btrfs] ? pick_next_task_fair+0x2cd/0x530 ? __switch_to+0x92/0x4b0 btrfs_worker_helper+0x81/0x300 [btrfs] process_one_work+0x1da/0x3f0 worker_thread+0x2b/0x3f0 ? process_one_work+0x3f0/0x3f0 kthread+0x11a/0x130 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x35/0x40 BTRFS critical (device vda2): unable to find logical 8820195328 length 16384 BTRFS: error (device vda2) in btrfs_finish_ordered_io:3023: errno=-5 IO failure BTRFS info (device vda2): forced readonly BTRFS error (device vda2): pending csums is 2887680 [CAUSE] It's caused by race with block group auto removal: - There is a meta block group X, which has only one tree block The tree block belongs to fs tree 257. - In current transaction, some operation modified fs tree 257 The tree block gets COWed, so the block group X is empty, and marked as unused, queued to be deleted. - Some workload (like fsync) wakes up cleaner_kthread() Which will call btrfs_delete_unused_bgs() to remove unused block groups. So block group X along its chunk map get removed. - Some delalloc work finished for fs tree 257 Quota needs to get the original reference of the extent, which will read tree blocks of commit root of 257. Then since the chunk map gets removed, the above warning gets triggered. [FIX] Just let btrfs_delete_unused_bgs() skip block group which still has pinned bytes. However there is a minor side effect: currently we only queue empty blocks at update_block_group(), and such empty block group with pinned bytes won't go through update_block_group() again, such block group won't be removed, until it gets new extent allocated and removed. Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Qu Wenruo authored
[ Upstream commit 389305b2 ] Invalid reloc tree can cause kernel NULL pointer dereference when btrfs does some cleanup of the reloc roots. It turns out that fs_info::reloc_ctl can be NULL in btrfs_recover_relocation() as we allocate relocation control after all reloc roots have been verified. So when we hit: note, we haven't called set_reloc_control() thus fs_info::reloc_ctl is still NULL. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199833Reported-by:
Xu Wen <wen.xu@gatech.edu> Signed-off-by:
Qu Wenruo <wqu@suse.com> Tested-by:
Gu Jinxiang <gujx@cn.fujitsu.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Misono Tomohiro authored
[ Upstream commit 1e7e1f9e ] on-disk devs stats value is updated in btrfs_run_dev_stats(), which is called during commit transaction, if device->dev_stats_ccnt is not zero. Since current replace operation does not touch dev_stats_ccnt, on-disk dev stats value is not updated. Therefore "btrfs device stats" may return old device's value after umount/mount (Example: See "btrfs ins dump-t -t DEV $DEV" after btrfs/100 finish). Fix this by just incrementing dev_stats_ccnt in btrfs_dev_replace_finishing() when replace is succeeded and this will update the values. Signed-off-by:
Misono Tomohiro <misono.tomohiro@jp.fujitsu.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Levin Du authored
[ Upstream commit 640332d1 ] PWM2 is commonly used to control voltage of PWM regulator of VDD_LOG in RK3399. On the Firefly-RK3399 board, PWM2 outputs 40 KHz square wave from power on and the VDD_LOG is about 0.9V. When the kernel boots normally into the system, the PWM2 keeps outputing PWM signal. But the kernel hangs randomly after "Starting kernel ..." line on that board. When it happens, PWM2 outputs high level which causes VDD_LOG drops to 0.4V below the normal operating voltage. By adding "pclk_rkpwm_pmu" to the rk3399_pmucru_critical_clocks array, PWM clock is ensured to be prepared at startup and the PWM2 output is normal. After repeated tests, the early boot hang is gone. This patch works on both Firefly-RK3399 and ROC-RK3399-PC boards. Signed-off-by:
Levin Du <djw@t-chip.com.cn> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mahesh Salgaonkar authored
[ Upstream commit 74e96bf4 ] The global mce data buffer that used to copy rtas error log is of 2048 (RTAS_ERROR_LOG_MAX) bytes in size. Before the copy we read extended_log_length from rtas error log header, then use max of extended_log_length and RTAS_ERROR_LOG_MAX as a size of data to be copied. Ideally the platform (phyp) will never send extended error log with size > 2048. But if that happens, then we have a risk of buffer overrun and corruption. Fix this by using min_t instead. Fixes: d368514c ("powerpc: Fix corruption when grabbing FWNMI data") Reported-by:
Michal Suchanek <msuchanek@suse.com> Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steve French authored
[ Upstream commit 289131e1 ] For SMB2/SMB3 the number of requests sent was not displayed in /proc/fs/cifs/Stats unless CONFIG_CIFS_STATS2 was enabled (only number of failed requests displayed). As with earlier dialects, we should be displaying these counters if CONFIG_CIFS_STATS is enabled. They are important for debugging. e.g. when you cat /proc/fs/cifs/Stats (before the patch) Resources in use CIFS Session: 1 Share (unique mount targets): 2 SMB Request/Response Buffer: 1 Pool size: 5 SMB Small Req/Resp Buffer: 1 Pool size: 30 Operations (MIDs): 0 0 session 0 share reconnects Total vfs operations: 690 maximum at one time: 2 1) \\localhost\test SMBs: 975 Negotiates: 0 sent 0 failed SessionSetups: 0 sent 0 failed Logoffs: 0 sent 0 failed TreeConnects: 0 sent 0 failed TreeDisconnects: 0 sent 0 failed Creates: 0 sent 2 failed Closes: 0 sent 0 failed Flushes: 0 sent 0 failed Reads: 0 sent 0 failed Writes: 0 sent 0 failed Locks: 0 sent 0 failed IOCTLs: 0 sent 1 failed Cancels: 0 sent 0 failed Echos: 0 sent 0 failed QueryDirectories: 0 sent 63 failed Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Aurelien Aptel <aaptel@suse.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steve French authored
[ Upstream commit c281bc0c ] echo 0 > /proc/fs/cifs/Stats is supposed to reset the stats but there were four (see example below) that were not reset (bytes read and witten, total vfs ops and max ops at one time). ... 0 session 0 share reconnects Total vfs operations: 100 maximum at one time: 2 1) \\localhost\test SMBs: 0 Bytes read: 502092 Bytes written: 31457286 TreeConnects: 0 total 0 failed TreeDisconnects: 0 total 0 failed ... This patch fixes cifs_stats_proc_write to properly reset those four. Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Aurelien Aptel <aaptel@suse.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
YueHaibing authored
[ Upstream commit 5941923d ] Fix a static code checker warning: net/rds/ib_frmr.c:82 rds_ib_alloc_frmr() warn: passing zero to 'ERR_PTR' The error path for ib_alloc_mr failure should set err to PTR_ERR. Fixes: 1659185f ("RDS: IB: Support Fastreg MR (FRMR) memory registration mode") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Breno Leitao authored
[ Upstream commit 7c27a26e ] There are some powerpc selftests, as tm/tm-unavailable, that run for a long period (>120 seconds), and if it is interrupted, as pressing CRTL-C (SIGINT), the foreground process (harness) dies but the child process and threads continue to execute (with PPID = 1 now) in background. In this case, you'd think the whole test exited, but there are remaining threads and processes being executed in background. Sometimes these zombies processes are doing annoying things, as consuming the whole CPU or dumping things to STDOUT. This patch fixes this problem by attaching an empty signal handler to SIGINT in the harness process. This handler will interrupt (EINTR) the parent process waitpid() call, letting the code to follow through the normal flow, which will kill all the processes in the child process group. This patch also fixes a typo. Signed-off-by:
Breno Leitao <leitao@debian.org> Signed-off-by:
Gustavo Romero <gromero@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ian Abbott authored
[ Upstream commit e083926b ] The PFI subdevice flags indicate that the subdevice is readable and writeable, but that is only true for the supported "M-series" boards, not the older "E-series" boards. Only set the SDF_READABLE and SDF_WRITABLE subdevice flags for the M-series boards. These two flags are mainly for informational purposes. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
John Pittman authored
[ Upstream commit 784c9a29 ] It was reported that softlockups occur when using dm-snapshot ontop of slow (rbd) storage. E.g.: [ 4047.990647] watchdog: BUG: soft lockup - CPU#10 stuck for 22s! [kworker/10:23:26177] ... [ 4048.034151] Workqueue: kcopyd do_work [dm_mod] [ 4048.034156] RIP: 0010:copy_callback+0x41/0x160 [dm_snapshot] ... [ 4048.034190] Call Trace: [ 4048.034196] ? __chunk_is_tracked+0x70/0x70 [dm_snapshot] [ 4048.034200] run_complete_job+0x5f/0xb0 [dm_mod] [ 4048.034205] process_jobs+0x91/0x220 [dm_mod] [ 4048.034210] ? kcopyd_put_pages+0x40/0x40 [dm_mod] [ 4048.034214] do_work+0x46/0xa0 [dm_mod] [ 4048.034219] process_one_work+0x171/0x370 [ 4048.034221] worker_thread+0x1fc/0x3f0 [ 4048.034224] kthread+0xf8/0x130 [ 4048.034226] ? max_active_store+0x80/0x80 [ 4048.034227] ? kthread_bind+0x10/0x10 [ 4048.034231] ret_from_fork+0x35/0x40 [ 4048.034233] Kernel panic - not syncing: softlockup: hung tasks Fix this by calling cond_resched() after run_complete_job()'s callout to the dm_kcopyd_notify_fn (which is dm-snap.c:copy_callback in the above trace). Signed-off-by:
John Pittman <jpittman@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Petazzoni authored
[ Upstream commit dfd0309f ] pcie->realio.end should be the address of last byte of the area, therefore using resource_size() of another resource is not correct, we must substract 1 to get the address of the last byte. Fixes: 11be6547 ("PCI: mvebu: Adapt to the new device tree layout") Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
[ Upstream commit 0756c57b ] We accidentally return success instead of -ENOMEM on this error path. Fixes: 2908d778 ("[SCSI] aic94xx: new driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hans de Goede authored
[ Upstream commit 5971b0c1 ] Since commit 63347db0 "ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs" the status field of normal acpi_devices gets set to 0 by acpi_bus_type_and_status() and filled with its actual value later when acpi_add_single_object() calls acpi_bus_get_status(). This means that any acpi_match_device_ids() calls in between will always fail with -ENOENT. We already have a workaround for this, which temporary forces status to ACPI_STA_DEFAULT in drivers/acpi/x86/utils.c: acpi_device_always_present() and the next commit in this series adds another acpi_match_device_ids() call between status being initialized as 0 and the acpi_bus_get_status() call. Rather then adding another workaround, this commit makes acpi_bus_type_and_status() initialize status to ACPI_STA_DEFAULT, this is safe to do as the only code looking at status between the initialization and the acpi_bus_get_status() call is those acpi_match_device_ids() calls. Note this does mean that we need to (re)set status to 0 in case the acpi_bus_get_status() call fails. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan Haberland authored
[ Upstream commit 7c6553d4 ] Fix a panic that occurs for a device that got an error in dasd_eckd_check_characteristics() during online processing. For example the read configuration data command may have failed. If this error occurs the device is not being set online and the earlier invoked steps during online processing are rolled back. Therefore dasd_eckd_uncheck_device() is called which needs a valid private structure. But this pointer is not valid if dasd_eckd_check_characteristics() has failed. Check for a valid device->private pointer to prevent a panic. Reviewed-by:
Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by:
Stefan Haberland <sth@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan Haberland authored
[ Upstream commit 669f3765 ] During offline processing two worker threads are canceled without freeing the device reference which leads to a hanging offline process. Reviewed-by:
Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by:
Stefan Haberland <sth@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Edwards authored
[ Upstream commit d6c02a9b ] In commit ed996a52 ("block: simplify and cleanup bvec pool handling"), the value of the slab index is incremented by one in bvec_alloc() after the allocation is done to indicate an index value of 0 does not need to be later freed. bvec_nr_vecs() was not updated accordingly, and thus returns the wrong value. Decrement idx before performing the lookup. Fixes: ed996a52 ("block: simplify and cleanup bvec pool handling") Signed-off-by:
Greg Edwards <gedwards@ddn.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sandipan Das authored
[ Upstream commit 354b064b ] In some cases, a symbol may have multiple aliases. Attempting to add an entry probe for such symbols results in a probe being added at an incorrect location while it fails altogether for return probes. This is only applicable for binaries with debug information. During the arch-dependent post-processing, the offset from the start of the symbol at which the probe is to be attached is determined and added to the start address of the symbol to get the probe's location. In case there are multiple aliases, this offset gets added multiple times for each alias of the symbol and we end up with an incorrect probe location. This can be verified on a powerpc64le system as shown below. $ nm /lib/modules/$(uname -r)/build/vmlinux | grep "sys_open$" ... c000000000414290 T __se_sys_open c000000000414290 T sys_open $ objdump -d /lib/modules/$(uname -r)/build/vmlinux | grep -A 10 "<__se_sys_open>:" c000000000414290 <__se_sys_open>: c000000000414290: 19 01 4c 3c addis r2,r12,281 c000000000414294: 70 c4 42 38 addi r2,r2,-15248 c000000000414298: a6 02 08 7c mflr r0 c00000000041429c: e8 ff a1 fb std r29,-24(r1) c0000000004142a0: f0 ff c1 fb std r30,-16(r1) c0000000004142a4: f8 ff e1 fb std r31,-8(r1) c0000000004142a8: 10 00 01 f8 std r0,16(r1) c0000000004142ac: c1 ff 21 f8 stdu r1,-64(r1) c0000000004142b0: 78 23 9f 7c mr r31,r4 c0000000004142b4: 78 1b 7e 7c mr r30,r3 For both the entry probe and the return probe, the probe location should be _text+4276888 (0xc000000000414298). Since another alias exists for 'sys_open', the post-processing code will end up adding the offset (8 for powerpc64le) twice and perf will attempt to add the probe at _text+4276896 (0xc0000000004142a0) instead. Before: # perf probe -v -a sys_open probe-definition(0): sys_open symbol:sys_open file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux Try to find probe point from debuginfo. Symbol sys_open address found : c000000000414290 Matched function: __se_sys_open [2ad03a0] Probe point found: __se_sys_open+0 Found 1 probe_trace_events. Opening /sys/kernel/debug/tracing/kprobe_events write=1 Writing event: p:probe/sys_open _text+4276896 Added new event: probe:sys_open (on sys_open) ... # perf probe -v -a sys_open%return $retval probe-definition(0): sys_open%return symbol:sys_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux Try to find probe point from debuginfo. Symbol sys_open address found : c000000000414290 Matched function: __se_sys_open [2ad03a0] Probe point found: __se_sys_open+0 Found 1 probe_trace_events. Opening /sys/kernel/debug/tracing/README write=0 Opening /sys/kernel/debug/tracing/kprobe_events write=1 Parsing probe_events: p:probe/sys_open _text+4276896 Group:probe Event:sys_open probe:p Writing event: r:probe/sys_open__return _text+4276896 Failed to write event: Invalid argument Error: Failed to add events. Reason: Invalid argument (Code: -22) After: # perf probe -v -a sys_open probe-definition(0): sys_open symbol:sys_open file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux Try to find probe point from debuginfo. Symbol sys_open address found : c000000000414290 Matched function: __se_sys_open [2ad03a0] Probe point found: __se_sys_open+0 Found 1 probe_trace_events. Opening /sys/kernel/debug/tracing/kprobe_events write=1 Writing event: p:probe/sys_open _text+4276888 Added new event: probe:sys_open (on sys_open) ... # perf probe -v -a sys_open%return $retval probe-definition(0): sys_open%return symbol:sys_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux Try to find probe point from debuginfo. Symbol sys_open address found : c000000000414290 Matched function: __se_sys_open [2ad03a0] Probe point found: __se_sys_open+0 Found 1 probe_trace_events. Opening /sys/kernel/debug/tracing/README write=0 Opening /sys/kernel/debug/tracing/kprobe_events write=1 Parsing probe_events: p:probe/sys_open _text+4276888 Group:probe Event:sys_open probe:p Writing event: r:probe/sys_open__return _text+4276888 Added new event: probe:sys_open__return (on sys_open%return) ... Reported-by:
Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Sandipan Das <sandipan@linux.ibm.com> Acked-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Fixes: 99e608b5 ("perf probe ppc64le: Fix probe location when using DWARF") Link: http://lkml.kernel.org/r/20180809161929.35058-1-sandipan@linux.ibm.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
[ Upstream commit c42d3be0 ] The problem is the the calculation should be "end - start + 1" but the plus one is missing in this calculation. Fixes: 8626816e ("powerpc: add support for MPIC message register API") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jean-Philippe Brucker authored
[ Upstream commit 92aef467 ] Currently when virtio_find_single_vq fails, we go through del_vqs which throws a warning (Trying to free already-free IRQ). Skip del_vqs if vq allocation failed. Link: http://lkml.kernel.org/r/20180524101021.49880-1-jean-philippe.brucker@arm.comSigned-off-by:
Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Reviewed-by:
Greg Kurz <groug@kaod.org> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Dominique Martinet <dominique.martinet@cea.fr> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tomas Bortoli authored
[ Upstream commit 9f476d7c ] It may be possible to run p9_fd_cancel() with a deleted req->req_list and incur in a double del. To fix hold the client->lock while changing the status, so the other threads will be synchronized. Link: http://lkml.kernel.org/r/20180723184253.6682-1-tomasbortoli@gmail.comSigned-off-by:
Tomas Bortoli <tomasbortoli@gmail.com> Reported-by: syzbot+735d926e9d1317c3310c@syzkaller.appspotmail.com To: Eric Van Hensbergen <ericvh@gmail.com> To: Ron Minnich <rminnich@sandia.gov> To: Latchesar Ionkov <lucho@ionkov.net> Cc: Yiwen Jiang <jiangyiwen@huwei.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Dominique Martinet <dominique.martinet@cea.fr> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jonas Gorski authored
[ Upstream commit 0702bc4d ] When compiling bmips with SMP disabled, the build fails with: drivers/irqchip/irq-bcm7038-l1.o: In function `bcm7038_l1_cpu_offline': drivers/irqchip/irq-bcm7038-l1.c:242: undefined reference to `irq_set_affinity_locked' make[5]: *** [vmlinux] Error 1 Fix this by adding and setting bcm7038_l1_cpu_offline only when actually compiling for SMP. It wouldn't have been used anyway, as it requires CPU_HOTPLUG, which in turn requires SMP. Fixes: 34c53579 ("irqchip/bcm7038-l1: Implement irq_cpu_offline() callback") Signed-off-by:
Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gal Pressman authored
[ Upstream commit a1ceeca6 ] hns bitmap allocation functions return 0 on success and -1 on failure. Callers of these functions wrongly used their return value as an errno, fix that by making a proper conversion. Fixes: a598c6f4 ("IB/hns: Simplify function of pd alloc and qp alloc") Signed-off-by:
Gal Pressman <pressmangal@gmail.com> Acked-by:
Lijun Ou <oulijun@huawei.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Aleh Filipovich authored
[ Upstream commit 880b29ac ] Add entry to WMI keymap for lid flip event on Asus UX360. On Asus Zenbook ux360 flipping lid from/to tablet mode triggers keyscan code 0xfa which cannot be handled and results in kernel log message "Unknown key fa pressed". Signed-off-by: Aleh Filipovich<aleh@appnexus.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Guenter Roeck authored
[ Upstream commit 2f606da7 ] Instantiating the sm501 OHCI subdevice results in a kernel warning. sm501-usb sm501-usb: SM501 OHCI sm501-usb sm501-usb: new USB bus registered, assigned bus number 1 WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 ohci_init+0x194/0x2d8 Modules linked in: CPU: 0 PID: 1 Comm: swapper Tainted: G W 4.18.0-rc7-00178-g0b5b1f9a #1 PC is at ohci_init+0x194/0x2d8 PR is at ohci_init+0x168/0x2d8 PC : 8c27844c SP : 8f81dd94 SR : 40008001 TEA : 29613060 R0 : 00000000 R1 : 00000000 R2 : 00000000 R3 : 00000202 R4 : 8fa98b88 R5 : 8c277e68 R6 : 00000000 R7 : 00000000 R8 : 8f965814 R9 : 8c388100 R10 : 8fa98800 R11 : 8fa98928 R12 : 8c48302c R13 : 8fa98920 R14 : 8c48302c MACH: 00000096 MACL: 0000017c GBR : 00000000 PR : 8c278420 Call trace: [<(ptrval)>] usb_add_hcd+0x1e8/0x6ec [<(ptrval)>] _dev_info+0x0/0x54 [<(ptrval)>] arch_local_save_flags+0x0/0x8 [<(ptrval)>] arch_local_irq_restore+0x0/0x24 [<(ptrval)>] ohci_hcd_sm501_drv_probe+0x114/0x2d8 ... Initialize coherent_dma_mask when creating SM501 subdevices to fix the problem. Fixes: b6d6454f ("mfd: SM501 core driver") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tan Hu authored
[ Upstream commit a53b42c1 ] We came across infinite loop in ipvs when using ipvs in docker env. When ipvs receives new packets and cannot find an ipvs connection, it will create a new connection, then if the dest is unavailable (i.e. IP_VS_DEST_F_AVAILABLE), the packet will be dropped sliently. But if the dropped packet is the first packet of this connection, the connection control timer never has a chance to start and the ipvs connection cannot be released. This will lead to memory leak, or infinite loop in cleanup_net() when net namespace is released like this: ip_vs_conn_net_cleanup at ffffffffa0a9f31a [ip_vs] __ip_vs_cleanup at ffffffffa0a9f60a [ip_vs] ops_exit_list at ffffffff81567a49 cleanup_net at ffffffff81568b40 process_one_work at ffffffff810a851b worker_thread at ffffffff810a9356 kthread at ffffffff810b0b6f ret_from_fork at ffffffff81697a18 race condition: CPU1 CPU2 ip_vs_in() ip_vs_conn_new() ip_vs_del_dest() __ip_vs_unlink_dest() ~IP_VS_DEST_F_AVAILABLE cp->dest && !IP_VS_DEST_F_AVAILABLE __ip_vs_conn_put ... cleanup_net ---> infinite looping Fix this by checking whether the timer already started. Signed-off-by:
Tan Hu <tan.hu@zte.com.cn> Reviewed-by:
Jiang Biao <jiang.biao2@zte.com.cn> Acked-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-