- 26 Jul, 2019 40 commits
-
-
Dmitry Osipenko authored
[ Upstream commit 7a391670 ] Release all requested IRQ's on the request error to properly clean up allocated resources. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Acked-By:
Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Amadeusz Sławiński authored
[ Upstream commit 0f6ff785 ] When we unload Skylake driver we may end up calling hdac_component_master_unbind(), it uses acomp->audio_ops, which we set in hdmi_codec_probe(), so we need to set it to NULL in hdmi_codec_remove(), otherwise we will dereference no longer existing pointer. Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Kyle Meyer authored
[ Upstream commit 9f94c7f9 ] Attempting to profile 1024 or more CPUs with perf causes two errors: perf record -a [ perf record: Woken up X times to write data ] way too many cpu caches.. [ perf record: Captured and wrote X MB perf.data (X samples) ] perf report -C 1024 Error: failed to set cpu bitmap Requested CPU 1024 too large. Consider raising MAX_NR_CPUS Increasing MAX_NR_CPUS from 1024 to 2048 and redefining MAX_CACHES as MAX_NR_CPUS * 4 returns normal functionality to perf: perf record -a [ perf record: Woken up X times to write data ] [ perf record: Captured and wrote X MB perf.data (X samples) ] perf report -C 1024 ... Signed-off-by:
Kyle Meyer <kyle.meyer@hpe.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190620193630.154025-1-meyerk@stormcage.eag.rdlabs.hpecorp.netSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Miaoqing Pan authored
[ Upstream commit 011d4111 ] Observed PCIE device wake up failed after ~120 iterations of soft-reboot test. The error message is "ath10k_pci 0000:01:00.0: failed to wake up device : -110" The call trace as below: ath10k_pci_probe -> ath10k_pci_force_wake -> ath10k_pci_wake_wait -> ath10k_pci_is_awake Once trigger the device to wake up, we will continuously check the RTC state until it returns RTC_STATE_V_ON or timeout. But for QCA99x0 chips, we use wrong value for RTC_STATE_V_ON. Occasionally, we get 0x7 on the fist read, we thought as a failure case, but actually is the right value, also verified with the spec. So fix the issue by changing RTC_STATE_V_ON from 0x5 to 0x7, passed ~2000 iterations. Tested HW: QCA9984 Signed-off-by:
Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Miaoqing Pan authored
[ Upstream commit 08d80e4c ] On SMP platform, when continuously running wifi up/down, the napi poll can be scheduled during chip reset, which will call ath10k_pci_has_fw_crashed() to check the fw status. But in the reset period, the value from FW_INDICATOR_ADDRESS register will return 0xdeadbeef, which also be treated as fw crash. Fix the issue by moving chip reset after napi disabled. ath10k_pci 0000:01:00.0: firmware crashed! (guid 73b30611-5b1e-4bdd-90b4-64c81eb947b6) ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1 ath10k_pci 0000:01:00.0: failed to get memcpy hi address for firmware address 4: -16 ath10k_pci 0000:01:00.0: failed to read firmware dump area: -16 ath10k_pci 0000:01:00.0: Copy Engine register dump: ath10k_pci 0000:01:00.0: [00]: 0x0004a000 0 0 0 0 ath10k_pci 0000:01:00.0: [01]: 0x0004a400 0 0 0 0 ath10k_pci 0000:01:00.0: [02]: 0x0004a800 0 0 0 0 ath10k_pci 0000:01:00.0: [03]: 0x0004ac00 0 0 0 0 ath10k_pci 0000:01:00.0: [04]: 0x0004b000 0 0 0 0 ath10k_pci 0000:01:00.0: [05]: 0x0004b400 0 0 0 0 ath10k_pci 0000:01:00.0: [06]: 0x0004b800 0 0 0 0 ath10k_pci 0000:01:00.0: [07]: 0x0004bc00 1 0 1 0 ath10k_pci 0000:01:00.0: [08]: 0x0004c000 0 0 0 0 ath10k_pci 0000:01:00.0: [09]: 0x0004c400 0 0 0 0 ath10k_pci 0000:01:00.0: [10]: 0x0004c800 0 0 0 0 ath10k_pci 0000:01:00.0: [11]: 0x0004cc00 0 0 0 0 Tested HW: QCA9984,QCA9887,WCN3990 Signed-off-by:
-
Claire Chang authored
[ Upstream commit 4b553f3c ] In function ath10k_sdio_mbox_rx_alloc() [sdio.c], ath10k_sdio_mbox_alloc_rx_pkt() is called without handling the error cases. This will make the driver think the allocation for skb is successful and try to access the skb. If we enable failslab, system will easily crash with NULL pointer dereferencing. Call trace of CONFIG_FAILSLAB: ath10k_sdio_irq_handler+0x570/0xa88 [ath10k_sdio] process_sdio_pending_irqs+0x4c/0x174 sdio_run_irqs+0x3c/0x64 sdio_irq_work+0x1c/0x28 Fixes: d96db25d ("ath10k: add initial SDIO support") Signed-off-by:
Claire Chang <tientzu@chromium.org> Reviewed-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
-
Julian Anastasov authored
[ Upstream commit 5db7c8b9 ] syzkaller reports for memory leak in start_sync_thread [1] As Eric points out, kthread may start and stop before the threadfn function is called, so there is no chance the data (tinfo in our case) to be released in thread. Fix this by releasing tinfo in the controlling code instead. [1] BUG: memory leak unreferenced object 0xffff8881206bf700 (size 32): comm "syz-executor761", pid 7268, jiffies 4294943441 (age 20.470s) hex dump (first 32 bytes): 00 40 7c 09 81 88 ff ff 80 45 b8 21 81 88 ff ff .@|......E.!.... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000057619e23>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<0000000057619e23>] slab_post_alloc_hook mm/slab.h:439 [inline] [<0000000057619e23>] slab_alloc mm/slab.c:3326 [inline] [<0000000057619e23>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553 [<0000000086ce5479>] kmalloc include/linux/slab.h:547 [inline] [<0000000086ce5479>] start_sync_thread+0x5d2/0xe10 net/netfilter/ipvs/ip_vs_sync.c:1862 [<000000001a9229cc>] do_ip_vs_set_ctl+0x4c5/0x780 net/netfilter/ipvs/ip_vs_ctl.c:2402 [<00000000ece457c8>] nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] [<00000000ece457c8>] nf_setsockopt+0x4c/0x80 net/netfilter/nf_sockopt.c:115 [<00000000942f62d4>] ip_setsockopt net/ipv4/ip_sockglue.c:1258 [inline] [<00000000942f62d4>] ip_setsockopt+0x9b/0xb0 net/ipv4/ip_sockglue.c:1238 [<00000000a56a8ffd>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616 [<00000000fa895401>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3130 [<0000000095eef4cf>] __sys_setsockopt+0x98/0x120 net/socket.c:2078 [<000000009747cf88>] __do_sys_setsockopt net/socket.c:2089 [inline] [<000000009747cf88>] __se_sys_setsockopt net/socket.c:2086 [inline] [<000000009747cf88>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086 [<00000000ded8ba80>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301 [<00000000893b4ac8>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported-by: syzbot+7e2e50c8adfccd2e5041@syzkaller.appspotmail.com Suggested-by:
Eric Biggers <ebiggers@kernel.org> Fixes: 998e7a76 ("ipvs: Use kthread_run() instead of doing a double-fork via kernel_thread()") Signed-off-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Lorenzo Bianconi authored
[ Upstream commit 23377c20 ] When the device is disconnected while passing traffic it is possible to receive out of order urbs causing a memory leak since the skb linked to the current tx urb is not removed. Fix the issue deallocating the skb cleaning up the tx ring. Moreover this patch fixes the following kernel warning [ 57.480771] usb 1-1: USB disconnect, device number 2 [ 57.483451] ------------[ cut here ]------------ [ 57.483462] TX urb mismatch [ 57.483481] WARNING: CPU: 1 PID: 32 at drivers/net/wireless/mediatek/mt7601u/dma.c:245 mt7601u_complete_tx+0x165/00 [ 57.483483] Modules linked in: [ 57.483496] CPU: 1 PID: 32 Comm: kworker/1:1 Not tainted 5.2.0-rc1+ #72 [ 57.483498] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-2.fc30 04/01/2014 [ 57.483502] Workqueue: usb_hub_wq hub_event [ 57.483507] RIP: 0010:mt7601u_complete_tx+0x165/0x1e0 [ 57.483510] Code: 8b b5 10 04 00 00 8b 8d 14 04 00 00 eb 8b 80 3d b1 cb e1 00 00 75 9e 48 c7 c7 a4 ea 05 82 c6 05 f [ 57.483513] RSP: 0000:ffffc900000a0d28 EFLAGS: 00010092 [ 57.483516] RAX: 000000000000000f RBX: ffff88802c0a62c0 RCX: ffffc900000a0c2c [ 57.483518] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff810a8371 [ 57.483520] RBP: ffff88803ced6858 R08: 0000000000000000 R09: 0000000000000001 [ 57.483540] R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000046 [ 57.483542] R13: ffff88802c0a6c88 R14: ffff88803baab540 R15: ffff88803a0cc078 [ 57.483548] FS: 0000000000000000(0000) GS:ffff88803eb00000(0000) knlGS:0000000000000000 [ 57.483550] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 57.483552] CR2: 000055e7f6780100 CR3: 0000000028c86000 CR4: 00000000000006a0 [ 57.483554] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 57.483556] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 57.483559] Call Trace: [ 57.483561] <IRQ> [ 57.483565] __usb_hcd_giveback_urb+0x77/0xe0 [ 57.483570] xhci_giveback_urb_in_irq.isra.0+0x8b/0x140 [ 57.483574] handle_cmd_completion+0xf5b/0x12c0 [ 57.483577] xhci_irq+0x1f6/0x1810 [ 57.483581] ? lockdep_hardirqs_on+0x9e/0x180 [ 57.483584] ? _raw_spin_unlock_irq+0x24/0x30 [ 57.483588] __handle_irq_event_percpu+0x3a/0x260 [ 57.483592] handle_irq_event_percpu+0x1c/0x60 [ 57.483595] handle_irq_event+0x2f/0x4c [ 57.483599] handle_edge_irq+0x7e/0x1a0 [ 57.483603] handle_irq+0x17/0x20 [ 57.483607] do_IRQ+0x54/0x110 [ 57.483610] common_interrupt+0xf/0xf [ 57.483612] </IRQ> Acked-by:
Jakub Kicinski <kubakici@wp.pl> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit bc53d3d7 ] Without 'set -e', shell scripts continue running even after any error occurs. The missed 'set -e' is a typical bug in shell scripting. For example, when a disk space shortage occurs while this script is running, it actually ends up with generating a truncated capflags.c. Yet, mkcapflags.sh continues running and exits with 0. So, the build system assumes it has succeeded. It will not be re-generated in the next invocation of Make since its timestamp is newer than that of any of the source files. Add 'set -e' so that any error in this script is caught and propagated to the build system. Since 9c2af1c7 ("kbuild: add .DELETE_ON_ERROR special target"), make automatically deletes the target on any failure. So, the broken capflags.c will be deleted automatically. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/20190625072622.17679-1-yamada.masahiro@socionext.comSigned-off-by:
-
Lorenzo Bianconi authored
[ Upstream commit 4079e8cc ] Do not schedule rx_tasklet when the usb dongle is disconnected. Moreover do not grub rx_lock in mt7601u_kill_rx since usb_poison_urb can run concurrently with urb completion and we can unlink urbs from rx ring in any order. This patch fixes the common kernel warning reported when the device is removed. [ 24.921354] usb 3-14: USB disconnect, device number 7 [ 24.921593] ------------[ cut here ]------------ [ 24.921594] RX urb mismatch [ 24.921675] WARNING: CPU: 4 PID: 163 at drivers/net/wireless/mediatek/mt7601u/dma.c:200 mt7601u_complete_rx+0xcb/0xd0 [mt7601u] [ 24.921769] CPU: 4 PID: 163 Comm: kworker/4:2 Tainted: G OE 4.19.31-041931-generic #201903231635 [ 24.921770] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Extreme4, BIOS P1.30 05/23/2014 [ 24.921782] Workqueue: usb_hub_wq hub_event [ 24.921797] RIP: 0010:mt7601u_complete_rx+0xcb/0xd0 [mt7601u] [ 24.921800] RSP: 0018:ffff9bd9cfd03d08 EFLAGS: 00010086 [ 24.921802] RAX: 0000000000000000 RBX: ffff9bd9bf043540 RCX: 0000000000000006 [ 24.921803] RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff9bd9cfd16420 [ 24.921804] RBP: ffff9bd9cfd03d28 R08: 0000000000000002 R09: 00000000000003a8 [ 24.921805] R10: 0000002f485fca34 R11: 0000000000000000 R12: ffff9bd9bf043c1c [ 24.921806] R13: ffff9bd9c62fa3c0 R14: 0000000000000082 R15: 0000000000000000 [ 24.921807] FS: 0000000000000000(0000) GS:ffff9bd9cfd00000(0000) knlGS:0000000000000000 [ 24.921808] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.921808] CR2: 00007fb2648b0000 CR3: 0000000142c0a004 CR4: 00000000001606e0 [ 24.921809] Call Trace: [ 24.921812] <IRQ> [ 24.921819] __usb_hcd_giveback_urb+0x8b/0x140 [ 24.921821] usb_hcd_giveback_urb+0xca/0xe0 [ 24.921828] xhci_giveback_urb_in_irq.isra.42+0x82/0xf0 [ 24.921834] handle_cmd_completion+0xe02/0x10d0 [ 24.921837] xhci_irq+0x274/0x4a0 [ 24.921838] xhci_msi_irq+0x11/0x20 [ 24.921851] __handle_irq_event_percpu+0x44/0x190 [ 24.921856] handle_irq_event_percpu+0x32/0x80 [ 24.921861] handle_irq_event+0x3b/0x5a [ 24.921867] handle_edge_irq+0x80/0x190 [ 24.921874] handle_irq+0x20/0x30 [ 24.921889] do_IRQ+0x4e/0xe0 [ 24.921891] common_interrupt+0xf/0xf [ 24.921892] </IRQ> [ 24.921900] RIP: 0010:usb_hcd_flush_endpoint+0x78/0x180 [ 24.921354] usb 3-14: USB disconnect, device number 7 Signed-off-by:
-
Ping-Ke Shih authored
[ Upstream commit 6c0ed66f ] rtl_usb_probe() must do error handle rtl_deinit_core() only if rtl_init_core() is done, otherwise goto error_out2. | usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | rtl_usb: reg 0xf0, usbctrl_vendorreq TimeOut! status:0xffffffb9 value=0x0 | rtl8192cu: Chip version 0x10 | rtl_usb: reg 0xa, usbctrl_vendorreq TimeOut! status:0xffffffb9 value=0x0 | rtl_usb: Too few input end points found | INFO: trying to register non-static key. | the code is fine but needs lockdep annotation. | turning off the locking correctness validator. | CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.1.0-rc4-319354-g9a33b36 #3 | Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS | Google 01/01/2011 | Workqueue: usb_hub_wq hub_event | Call Trace: | __dump_stack lib/dump_stack.c:77 [inline] | dump_stack+0xe8/0x16e lib/dump_stack.c:113 | assign_lock_key kernel/locking/lockdep.c:786 [inline] | register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095 | __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582 | lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211 | __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] | _raw_spin_lock_irqsave+0x44/0x60 kernel/locking/spinlock.c:152 | rtl_c2hcmd_launcher+0xd1/0x390 | drivers/net/wireless/realtek/rtlwifi/base.c:2344 | rtl_deinit_core+0x25/0x2d0 drivers/net/wireless/realtek/rtlwifi/base.c:574 | rtl_usb_probe.cold+0x861/0xa70 | drivers/net/wireless/realtek/rtlwifi/usb.c:1093 | usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361 | really_probe+0x2da/0xb10 drivers/base/dd.c:509 | driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 | __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 | bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 | __device_attach+0x223/0x3a0 drivers/base/dd.c:844 | bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 | device_add+0xad2/0x16e0 drivers/base/core.c:2106 | usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021 | generic_probe+0xa2/0xda drivers/usb/core/generic.c:210 | usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266 | really_probe+0x2da/0xb10 drivers/base/dd.c:509 | driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 | __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 | bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 | __device_attach+0x223/0x3a0 drivers/base/dd.c:844 | bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 | device_add+0xad2/0x16e0 drivers/base/core.c:2106 | usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534 | hub_port_connect drivers/usb/core/hub.c:5089 [inline] | hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] | port_event drivers/usb/core/hub.c:5350 [inline] | hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432 | process_one_work+0x90f/0x1580 kernel/workqueue.c:2269 | worker_thread+0x9b/0xe20 kernel/workqueue.c:2415 | kthread+0x313/0x420 kernel/kthread.c:253 | ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Reported-by: syzbot+1fcc5ef45175fc774231@syzkaller.appspotmail.com Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Icenowy Zheng authored
[ Upstream commit 0fec7e72 ] The PHY selection bit also exists on SoCs without an internal PHY; if it's set to 1 (internal PHY, default value) then the MAC will not make use of any PHY on such SoCs. This problem appears when adapting for H6, which has no real internal PHY (the "internal PHY" on H6 is not on-die, but on a co-packaged AC200 chip, connected via RMII interface at GPIO bank A). Force the PHY selection bit to 0 when the SOC doesn't have an internal PHY, to address the problem of a wrong default value. Signed-off-by:
Icenowy Zheng <icenowy@aosc.io> Signed-off-by:
Ondrej Jirman <megous@megous.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Hans Verkuil authored
[ Upstream commit 6bc5a4a1 ] This driver has three locking issues: - The wait_event_interruptible() condition calls hdpvr_get_next_buffer(dev) which uses a mutex, which is not allowed. Rewrite with list_empty_careful() that doesn't need locking. - In hdpvr_read() the call to hdpvr_stop_streaming() didn't lock io_mutex, but it should have since stop_streaming expects that. - In hdpvr_device_release() io_mutex was locked when calling flush_work(), but there it shouldn't take that mutex since the work done by flush_work() also wants to lock that mutex. There are also two other changes (suggested by Keith): - msecs_to_jiffies(4000); (a NOP) should have been msleep(4000). - Change v4l2_dbg to v4l2_info to always log if streaming had to be restarted. Reported-by:
Keith Pyle <kpyle@austin.rr.com> Suggested-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
André Almeida authored
[ Upstream commit 77ae46e1 ] v4l2_fill_pixfmt() returns -EINVAL if the pixelformat used as parameter is invalid or if the user is trying to use a multiplanar format with the singleplanar API. Currently, the vimc_cap_try_fmt_vid_cap() returns such value, but vimc_cap_s_fmt_vid_cap() is ignoring it. Fix that and returns an error value if vimc_cap_try_fmt_vid_cap() has failed. Signed-off-by:
André Almeida <andrealmeid@collabora.com> Suggested-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
-
Philipp Zabel authored
[ Upstream commit b3b7d968 ] If no more frames are decoded in bitstream end mode, and a previously decoded frame has been returned, the firmware still increments the frame number. To avoid a sequence number mismatch after decoder restart, increment the sequence_offset correction parameter. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Marco Felsch authored
[ Upstream commit f3775f89 ] coda_encoder_cmd() is racy, as the last scheduled picture run worker can still be in-flight while the ENC_CMD_STOP command is issued. Depending on the exact timing the sequence numbers might already be changed, but the last buffer might not have been put on the destination queue yet. In this case the current implementation would prematurely wake the destination queue with last_buffer_dequeued=true, causing userspace to call streamoff before the last buffer is handled. Close this race window by synchronizing with the pic_run_worker before doing the sequence check. Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> [l.stach@pengutronix.de: switch to flush_work, reword commit message] Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
-
Philipp Zabel authored
[ Upstream commit 56d159a4 ] Sequence number handling assumed that the BIT processor frame number starts counting at 1, but this is not true for the MPEG-2 decoder, which starts at 0. Fix the sequence counter offset detection to handle this. Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit 2af22f3e ] Some Qualcomm Snapdragon based laptops built to run Microsoft Windows are clearly ACPI 5.1 based, given that that is the first ACPI revision that supports ARM, and introduced the FADT 'arm_boot_flags' field, which has a non-zero field on those systems. So in these cases, infer from the ARM boot flags that the FADT must be 5.1 or later, and treat it as 5.1. Acked-by:
Sudeep Holla <sudeep.holla@arm.com> Tested-by:
Lee Jones <lee.jones@linaro.org> Reviewed-by:
Graeme Gregory <graeme.gregory@linaro.org> Acked-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by:
Hanjun Guo <guohanjun@huawei.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Kuninori Morimoto authored
[ Upstream commit b545542a ] commit 34ac3c3e ("ASoC: core: lock client_mutex while removing link components") added mutex_lock() at soc_remove_link_components(). Is is called from snd_soc_unbind_card() snd_soc_unbind_card() => soc_remove_link_components() soc_cleanup_card_resources() soc_remove_dai_links() => soc_remove_link_components() And, there are 2 way to call it. (1) snd_soc_unregister_component() ** mutex_lock() snd_soc_component_del_unlocked() => snd_soc_unbind_card() ** mutex_unlock() (2) snd_soc_unregister_card() => snd_soc_unbind_card() (1) case is already using mutex_lock() when it calles snd_soc_unbind_card(), thus, we will get lockdep warning. commit 495f926c ("ASoC: core: Fix deadlock in snd_soc_instantiate_card()") tried to fixup it, but still not enough. We still have lockdep warning when we try unbind/bind. We need mutex_lock() under snd_soc_unregister_card() instead of snd_remove_link_components()/snd_soc_unbind_card(). Fixes: 34ac3c3e ("ASoC: core: lock client_mutex while removing link components") Fixes: 495f926c ("ASoC: core: Fix deadlock in snd_soc_instantiate_card()") Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
Robert Jarzmik authored
[ Upstream commit 8d4e29a5 ] In the patch refactoring the fw-node, the mt9m111 was broken for all platform_data based platforms, which were the first aim of this driver. Only the devicetree platform are still functional, probably because the testing was done on these. The result is that -EINVAL is systematically return for such platforms, what this patch fixes. [Sakari Ailus: Rework this to resolve a merge conflict and use dev_fwnode] Fixes: 98480d65 ("media: mt9m111: allow to setup pixclk polarity") Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Nathan Huckleberry authored
[ Upstream commit a9314773 ] With CONFIG_PROC_FS=n the following warning is emitted: kernel/time/timer_list.c:361:36: warning: unused variable 'timer_list_sops' [-Wunused-const-variable] static const struct seq_operations timer_list_sops = { Add #ifdef guard around procfs specific code. Signed-off-by:
Nathan Huckleberry <nhuck@google.com> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Cc: john.stultz@linaro.org Cc: sboyd@kernel.org Cc: clang-built-linux@googlegroups.com Link: https://github.com/ClangBuiltLinux/linux/issues/534 Link: https://lkml.kernel.org/r/20190614181604.112297-1-nhuck@google.comSigned-off-by:
-
Miroslav Lichvar authored
[ Upstream commit d897a4ab ] Don't allow the TAI-UTC offset of the system clock to be set by adjtimex() to a value larger than 100000 seconds. This prevents an overflow in the conversion to int, prevents the CLOCK_TAI clock from getting too far ahead of the CLOCK_REALTIME clock, and it is still large enough to allow leap seconds to be inserted at the maximum rate currently supported by the kernel (once per day) for the next ~270 years, however unlikely it is that someone can survive a catastrophic event which slowed down the rotation of the Earth so much. Reported-by:
Weikang shi <swkhack@gmail.com> Signed-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by:
-
Anders Roxell authored
[ Upstream commit b2ce5617 ] When building with CONFIG_VIDEO_ADV7511 and CONFIG_DRM_I2C_ADV7511 enabled as loadable modules, we see the following warning: drivers/gpu/drm/bridge/adv7511/adv7511.ko drivers/media/i2c/adv7511.ko Rework so that the file is named adv7511-v4l2.c. Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit e08efef8 ] Since the beginning the second clock ('special', 'sclk') was optional and it is not available on some variants of Exynos SoCs (i.e. Exynos5420 with v7 of MFC hardware). However commit 1bce6fb3 ("[media] s5p-mfc: Rework clock handling") made handling of all specified clocks mandatory. This patch restores original behavior of the driver and fixes its operation on Exynos5420 SoCs. Fixes: 1bce6fb3 ("[media] s5p-mfc: Rework clock handling") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Julian Anastasov authored
[ Upstream commit cf47a0b8 ] syzkaller reports for memory leak when registering hooks [1] As we moved the nf_unregister_net_hooks() call into __ip_vs_dev_cleanup(), defer the nf_register_net_hooks() call, so that hooks are allocated and freed from same pernet_operations (ipvs_core_dev_ops). [1] BUG: memory leak unreferenced object 0xffff88810acd8a80 (size 96): comm "syz-executor073", pid 7254, jiffies 4294950560 (age 22.250s) hex dump (first 32 bytes): 02 00 00 00 00 00 00 00 50 8b bb 82 ff ff ff ff ........P....... 00 00 00 00 00 00 00 00 00 77 bb 82 ff ff ff ff .........w...... backtrace: [<0000000013db61f1>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<0000000013db61f1>] slab_post_alloc_hook mm/slab.h:439 [inline] [<0000000013db61f1>] slab_alloc_node mm/slab.c:3269 [inline] [<0000000013db61f1>] kmem_cache_alloc_node_trace+0x15b/0x2a0 mm/slab.c:3597 [<000000001a27307d>] __do_kmalloc_node mm/slab.c:3619 [inline] [<000000001a27307d>] __kmalloc_node+0x38/0x50 mm/slab.c:3627 [<0000000025054add>] kmalloc_node include/linux/slab.h:590 [inline] [<0000000025054add>] kvmalloc_node+0x4a/0xd0 mm/util.c:431 [<0000000050d1bc00>] kvmalloc include/linux/mm.h:637 [inline] [<0000000050d1bc00>] kvzalloc include/linux/mm.h:645 [inline] [<0000000050d1bc00>] allocate_hook_entries_size+0x3b/0x60 net/netfilter/core.c:61 [<00000000e8abe142>] nf_hook_entries_grow+0xae/0x270 net/netfilter/core.c:128 [<000000004b94797c>] __nf_register_net_hook+0x9a/0x170 net/netfilter/core.c:337 [<00000000d1545cbc>] nf_register_net_hook+0x34/0xc0 net/netfilter/core.c:464 [<00000000876c9b55>] nf_register_net_hooks+0x53/0xc0 net/netfilter/core.c:480 [<000000002ea868e0>] __ip_vs_init+0xe8/0x170 net/netfilter/ipvs/ip_vs_core.c:2280 [<000000002eb2d451>] ops_init+0x4c/0x140 net/core/net_namespace.c:130 [<000000000284ec48>] setup_net+0xde/0x230 net/core/net_namespace.c:316 [<00000000a70600fa>] copy_net_ns+0xf0/0x1e0 net/core/net_namespace.c:439 [<00000000ff26c15e>] create_new_namespaces+0x141/0x2a0 kernel/nsproxy.c:107 [<00000000b103dc79>] copy_namespaces+0xa1/0xe0 kernel/nsproxy.c:165 [<000000007cc008a2>] copy_process.part.0+0x11fd/0x2150 kernel/fork.c:2035 [<00000000c344af7c>] copy_process kernel/fork.c:1800 [inline] [<00000000c344af7c>] _do_fork+0x121/0x4f0 kernel/fork.c:2369 Reported-by: syzbot+722da59ccb264bc19910@syzkaller.appspotmail.com Fixes: 719c7d56 ("ipvs: Fix use-after-free in ip_vs_in") Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 597179b0 ] kernelci.org reports failed builds on arc because of what looks like an old missed 'select' statement: net/xfrm/xfrm_algo.o: In function `xfrm_probe_algs': xfrm_algo.c:(.text+0x1e8): undefined reference to `crypto_has_ahash' I don't see this in randconfig builds on other architectures, but it's fairly clear we want to select the hash code for it, like we do for all its other users. As Herbert points out, CRYPTO_BLKCIPHER is also required even though it has not popped up in build tests. Fixes: 17bc1970 ("ipsec: Use skcipher and ahash when probing algorithms") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Julien Thierry authored
[ Upstream commit 9034f625 ] For el0_dbg and el0_error, DAIF bits get explicitly cleared before calling ct_user_exit. When context tracking is disabled, DAIF gets set (almost) immediately after. When context tracking is enabled, among the first things done is disabling IRQs. What is actually needed is: - PSR.D = 0 so the system can be debugged (should be already the case) - PSR.A = 0 so async error can be handled during context tracking Do not clear PSR.I in those two locations. Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Acked-by:
Mark Rutland <mark.rutland@arm.com> Reviewed-by:
James Morse <james.morse@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
Julien Thierry <julien.thierry@arm.com> Signed-off-by:
-
Minwoo Im authored
[ Upstream commit dad77d63 ] If the "irq_queues" are greater than num_possible_cpus(), nvme_calc_irq_sets() can have irq set_size for HCTX_TYPE_DEFAULT greater than it can be afforded. 2039 affd->set_size[HCTX_TYPE_DEFAULT] = nrirqs - nr_read_queues; It might cause a WARN() from the irq_build_affinity_masks() like [1]: 220 if (nr_present < numvecs) 221 WARN_ON(nr_present + nr_others < numvecs); This patch prevents it from the WARN() by adjusting the max_vector value from the nvme_setup_irqs(). [1] WARN messages when modprobe nvme write_queues=32 poll_queues=0: root@target:~/nvme# nproc 8 root@target:~/nvme# modprobe nvme write_queues=32 poll_queues=0 [ 17.925326] nvme nvme0: pci function 0000:00:04.0 [ 17.940601] WARNING: CPU: 3 PID: 1030 at kernel/irq/affinity.c:221 irq_create_affinity_masks+0x222/0x330 [ 17.940602] Modules linked in: nvme nvme_core [last unloaded: nvme] [ 17.940605] CPU: 3 PID: 1030 Comm: kworker/u17:4 Tainted: G W 5.1.0+ #156 [ 17.940605] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 17.940608] Workqueue: nvme-reset-wq nvme_reset_work [nvme] [ 17.940609] RIP: 0010:irq_create_affinity_masks+0x222/0x330 [ 17.940611] Code: 4c 8d 4c 24 28 4c 8d 44 24 30 e8 c9 fa ff ff 89 44 24 18 e8 c0 38 fa ff 8b 44 24 18 44 8b 54 24 1c 5a 44 01 d0 41 39 c4 76 02 <0f> 0b 48 89 df 44 01 e5 e8 f1 ce 10 00 48 8b 34 24 44 89 f0 44 01 [ 17.940611] RSP: 0018:ffffc90002277c50 EFLAGS: 00010216 [ 17.940612] RAX: 0000000000000008 RBX: ffff88807ca48860 RCX: 0000000000000000 [ 17.940612] RDX: ffff88807bc03800 RSI: 0000000000000020 RDI: 0000000000000000 [ 17.940613] RBP: 0000000000000001 R08: ffffc90002277c78 R09: ffffc90002277c70 [ 17.940613] R10: 0000000000000008 R11: 0000000000000001 R12: 0000000000000020 [ 17.940614] R13: 0000000000025d08 R14: 0000000000000001 R15: ffff88807bc03800 [ 17.940614] FS: 0000000000000000(0000) GS:ffff88807db80000(0000) knlGS:0000000000000000 [ 17.940616] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 17.940617] CR2: 00005635e583f790 CR3: 000000000240a000 CR4: 00000000000006e0 [ 17.940617] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 17.940618] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 17.940618] Call Trace: [ 17.940622] __pci_enable_msix_range+0x215/0x540 [ 17.940623] ? kernfs_put+0x117/0x160 [ 17.940625] pci_alloc_irq_vectors_affinity+0x74/0x110 [ 17.940626] nvme_reset_work+0xc30/0x1397 [nvme] [ 17.940628] ? __switch_to_asm+0x34/0x70 [ 17.940628] ? __switch_to_asm+0x40/0x70 [ 17.940629] ? __switch_to_asm+0x34/0x70 [ 17.940630] ? __switch_to_asm+0x40/0x70 [ 17.940630] ? __switch_to_asm+0x34/0x70 [ 17.940631] ? __switch_to_asm+0x40/0x70 [ 17.940632] ? nvme_irq_check+0x30/0x30 [nvme] [ 17.940633] process_one_work+0x20b/0x3e0 [ 17.940634] worker_thread+0x1f9/0x3d0 [ 17.940635] ? cancel_delayed_work+0xa0/0xa0 [ 17.940636] kthread+0x117/0x120 [ 17.940637] ? kthread_stop+0xf0/0xf0 [ 17.940638] ret_from_fork+0x3a/0x50 [ 17.940639] ---[ end trace aca8a131361cd42a ]--- [ 17.942124] nvme nvme0: 7/1/0 default/read/poll queues Signed-off-by:
Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Heiner Litz authored
[ Upstream commit 510fd8ea ] bio_add_pc_page() may merge pages when a bio is padded due to a flush. Fix iteration over the bio to free the correct pages in case of a merge. Signed-off-by:
Heiner Litz <hlitz@ucsc.edu> Reviewed-by:
Javier González <javier@javigon.com> Signed-off-by:
Matias Bjørling <mb@lightnvm.io> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Chaitanya Kulkarni authored
[ Upstream commit e71afda4 ] This patch removes the confusing assignment of the variable result at the time of declaration and sets the value in error cases next to the places where the actual error is happening. Here we also set the result value to -ENODEV when we fail at the final ctrl state transition in nvme_reset_work(). Without this assignment result will hold 0 from nvme_setup_io_queue() and on failure 0 will be passed to he nvme_remove_dead_ctrl() from final state transition. Signed-off-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by:
-
Minwoo Im authored
[ Upstream commit cee6c269 ] If the state change to NVME_CTRL_CONNECTING fails, the dmesg is going to be like: [ 293.689160] nvme nvme0: failed to mark controller CONNECTING [ 293.689160] nvme nvme0: Removing after probe failure status: 0 Even it prints the first line to indicate the situation, the second line is not proper because the status is 0 which means normally success of the previous operation. This patch makes it indicate the proper error value when it fails. [ 25.932367] nvme nvme0: failed to mark controller CONNECTING [ 25.932369] nvme nvme0: Removing after probe failure status: -16 This situation is able to be easily reproduced by: root@target:~# rmmod nvme && modprobe nvme && rmmod nvme Signed-off-by:
-
Anton Eidelman authored
[ Upstream commit 2181e455 ] When a shared namespace is removed, we call blk_cleanup_queue() when the device can still be accessed as the current path and this can result in submission to a dying queue. Hence, direct_make_request() called by our mpath device may fail (propagating the failure to userspace). Instead, we want to failover this I/O to a different path if one exists. Thus, before we cleanup the request queue, we make sure that the device is cleared from the current path nor it can be selected again as such. Fix this by: - clear the ns from the head->list and synchronize rcu to make sure there is no concurrent path search that restores it as the current path - clear the mpath current path in order to trigger a subsequent path search and sync srcu to wait for any ongoing request submissions - safely continue to namespace removal and blk_cleanup_queue Signed-off-by:
Anton Eidelman <anton@lightbitslabs.com> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Pan Bian authored
[ Upstream commit 585fb3d9 ] In edac_create_csrow_object(), the reference to the object is not released when adding the device to the device hierarchy fails (device_add()). This may result in a memory leak. Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Link: https://lkml.kernel.org/r/1555554438-103953-1-git-send-email-bianpan2016@163.comSigned-off-by:
-
Greg KH authored
[ Upstream commit 7adc05d2 ] Do put_device() if device_add() fails. [ bp: do device_del() for the successfully created devices in edac_create_csrow_objects(), on the unwind path. ] Signed-off-by:
-
Tudor Ambarus authored
[ Upstream commit f9481b08 ] at91sam9g25ek showed the following error at probe: atmel_spi f0000000.spi: Using dma0chan2 (tx) and dma0chan3 (rx) for DMA transfers atmel_spi: probe of f0000000.spi failed with error -22 Commit 0a919ae4 ("spi: Don't call spi_get_gpio_descs() before device name is set") moved the calling of spi_get_gpio_descs() after ctrl->dev is set, but didn't move the !ctrl->num_chipselect check. When there are chip selects in the device tree, the spi-atmel driver lets the SPI core discover them when registering the SPI master. The ctrl->num_chipselect is thus expected to be set by spi_get_gpio_descs(). Move the !ctlr->num_chipselect after spi_get_gpio_descs() as it was before the aforementioned commit. While touching this block, get rid of the explicit comparison with 0 and update the commenting style. Fixes: 0a919ae4 ("spi: Don't call spi_get_gpio_descs() before device name is set") Signed-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by:
-
Rafael J. Wysocki authored
[ Upstream commit 44758baf ] ACPI GPEs (other than the EC one) can be enabled in two situations. First, the GPEs with existing _Lxx and _Exx methods are enabled implicitly by ACPICA during system initialization. Second, the GPEs without these methods (like GPEs listed by _PRW objects for wakeup devices) need to be enabled directly by the code that is going to use them (e.g. ACPI power management or device drivers). In the former case, if the status of a given GPE is set to start with, its handler method (either _Lxx or _Exx) needs to be invoked to take care of the events (possibly) signaled before the GPE was enabled. In the latter case, however, the first caller of acpi_enable_gpe() for a given GPE should not be expected to care about any events that might be signaled through it earlier. In that case, it is better to clear the status of the GPE before enabling it, to prevent stale events from triggering unwanted actions (like spurious system resume, for example). For this reason, modify acpi_ev_add_gpe_reference() to take an additional boolean argument indicating whether or not the GPE status needs to be cleared when its reference counter changes from zero to one and make acpi_enable_gpe() pass TRUE to it through that new argument. Fixes: 18996f2d ("ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume") Reported-by:
Furquan Shaikh <furquan@google.com> Tested-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Dennis Zhou authored
[ Upstream commit a3fb01ba ] As is, iolatency recognizes done_bio and cleanup as ending paths. If a request is marked REQ_NOWAIT and fails to get a request, the bio is cleaned up via rq_qos_cleanup() and ended in bio_wouldblock_error(). This results in underflowing the inflight counter. Fix this by only accounting bios that were actually submitted. Signed-off-by:
Dennis Zhou <dennis@kernel.org> Cc: Josef Bacik <josef@toxicpanda.com> Signed-off-by:
-
Qian Cai authored
[ Upstream commit 1b7aebf0 ] cpuinfo_x86.x86_model is an unsigned type, so comparing against zero will generate a compilation warning: arch/x86/kernel/cpu/cacheinfo.c: In function 'cacheinfo_amd_init_llc_id': arch/x86/kernel/cpu/cacheinfo.c:662:19: warning: comparison is always true \ due to limited range of data type [-Wtype-limits] Remove the unnecessary lower bound check. [ bp: Massage. ] Fixes: 68091ee7 ("x86/CPU/AMD: Calculate last level cache ID from number of sharing threads") Signed-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Pu Wen <puwen@hygon.cn> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/1560954773-11967-1-git-send-email-cai@lca.pwSigned-off-by:
-
Ilias Apalodimas authored
[ Upstream commit 39e3622e ] Since we changed the Tx ring handling and now depends on bit31 to figure out the owner of the descriptor, we should initialize this every time the device goes down-up instead of doing it once on driver init. If the value is not correctly initialized the device won't have any available descriptors Changes since v1: - Typo fixes Fixes: 35e07d23 ("net: socionext: remove mmio reads on Tx") Signed-off-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by:
-
Mika Westerberg authored
[ Upstream commit c2bf1fc2 ] Currently Linux does not follow PCIe spec regarding the required delays after reset. A concrete example is a Thunderbolt add-in-card that consists of a PCIe switch and two PCIe endpoints: +-1b.0-[01-6b]----00.0-[02-6b]--+-00.0-[03]----00.0 TBT controller +-01.0-[04-36]-- DS hotplug port +-02.0-[37]----00.0 xHCI controller \-04.0-[38-6b]-- DS hotplug port The root port (1b.0) and the PCIe switch downstream ports are all PCIe gen3 so they support 8GT/s link speeds. We wait for the PCIe hierarchy to enter D3cold (runtime): pcieport 0000:00:1b.0: power state changed by ACPI to D3cold When it wakes up from D3cold, according to the PCIe 4.0 section 5.8 the PCIe switch is put to reset and its power is re-applied. This means that we must follow the rules in PCIe 4.0 section 6.6.1. For the PCIe gen3 ports we are dealing with here, the following applies: With a Downstream Port that supports Link speeds greater than 5.0 GT/s, software must wait a minimum of 100 ms after Link training completes before sending a Configuration Request to the device immediately below that Port. Software can determine when Link training completes by polling the Data Link Layer Link Active bit or by setting up an associated interrupt (see Section 6.7.3.3). Translating this into the above topology we would need to do this (DLLLA stands for Data Link Layer Link Active): pcieport 0000:00:1b.0: wait for 100ms after DLLLA is set before access to 0000:01:00.0 pcieport 0000:02:00.0: wait for 100ms after DLLLA is set before access to 0000:03:00.0 pcieport 0000:02:02.0: wait for 100ms after DLLLA is set before access to 0000:37:00.0 I've instrumented the kernel with additional logging so we can see the actual delays the kernel performs: pcieport 0000:00:1b.0: power state changed by ACPI to D0 pcieport 0000:00:1b.0: waiting for D3cold delay of 100 ms pcieport 0000:00:1b.0: waking up bus pcieport 0000:00:1b.0: waiting for D3hot delay of 10 ms pcieport 0000:00:1b.0: restoring config space at offset 0x2c (was 0x60, writing 0x60) ... pcieport 0000:00:1b.0: PME# disabled pcieport 0000:01:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) ... pcieport 0000:01:00.0: PME# disabled pcieport 0000:02:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) ... pcieport 0000:02:00.0: PME# disabled pcieport 0000:02:01.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) ... pcieport 0000:02:01.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407) pcieport 0000:02:01.0: PME# disabled pcieport 0000:02:02.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) ... pcieport 0000:02:02.0: PME# disabled pcieport 0000:02:04.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) ... pcieport 0000:02:04.0: PME# disabled pcieport 0000:02:01.0: PME# enabled pcieport 0000:02:01.0: waiting for D3hot delay of 10 ms pcieport 0000:02:04.0: PME# enabled pcieport 0000:02:04.0: waiting for D3hot delay of 10 ms thunderbolt 0000:03:00.0: restoring config space at offset 0x14 (was 0x0, writing 0x8a040000) ... thunderbolt 0000:03:00.0: PME# disabled xhci_hcd 0000:37:00.0: restoring config space at offset 0x10 (was 0x0, writing 0x73f00000) ... xhci_hcd 0000:37:00.0: PME# disabled For the switch upstream port (01:00.0) we wait for 100ms but not taking into account the DLLLA requirement. We then wait 10ms for D3hot -> D0 transition of the root port and the two downstream hotplug ports. This means that we deviate from what the spec requires. Performing the same check for system sleep (s2idle) transitions we can see following when resuming from s2idle: pcieport 0000:00:1b.0: power state changed by ACPI to D0 pcieport 0000:00:1b.0: restoring config space at offset 0x2c (was 0x60, writing 0x60) ... pcieport 0000:01:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) ... pcieport 0000:02:02.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) pcieport 0000:02:02.0: restoring config space at offset 0x2c (was 0x0, writing 0x0) pcieport 0000:02:01.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) pcieport 0000:02:04.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) pcieport 0000:02:02.0: restoring config space at offset 0x28 (was 0x0, writing 0x0) pcieport 0000:02:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) pcieport 0000:02:02.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1fff1) pcieport 0000:02:01.0: restoring config space at offset 0x2c (was 0x0, writing 0x60) pcieport 0000:02:02.0: restoring config space at offset 0x20 (was 0x0, writing 0x73f073f0) pcieport 0000:02:04.0: restoring config space at offset 0x2c (was 0x0, writing 0x60) pcieport 0000:02:01.0: restoring config space at offset 0x28 (was 0x0, writing 0x60) pcieport 0000:02:00.0: restoring config space at offset 0x2c (was 0x0, writing 0x0) pcieport 0000:02:02.0: restoring config space at offset 0x1c (was 0x101, writing 0x1f1) pcieport 0000:02:04.0: restoring config space at offset 0x28 (was 0x0, writing 0x60) pcieport 0000:02:01.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1ff10001) pcieport 0000:02:00.0: restoring config space at offset 0x28 (was 0x0, writing 0x0) pcieport 0000:02:02.0: restoring config space at offset 0x18 (was 0x0, writing 0x373702) pcieport 0000:02:04.0: restoring config space at offset 0x24 (was 0x10001, writing 0x49f12001) pcieport 0000:02:01.0: restoring config space at offset 0x20 (was 0x0, writing 0x73e05c00) pcieport 0000:02:00.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1fff1) pcieport 0000:02:04.0: restoring config space at offset 0x20 (was 0x0, writing 0x89f07400) pcieport 0000:02:01.0: restoring config space at offset 0x1c (was 0x101, writing 0x5151) pcieport 0000:02:00.0: restoring config space at offset 0x20 (was 0x0, writing 0x8a008a00) pcieport 0000:02:02.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020) pcieport 0000:02:04.0: restoring config space at offset 0x1c (was 0x101, writing 0x6161) pcieport 0000:02:01.0: restoring config space at offset 0x18 (was 0x0, writing 0x360402) pcieport 0000:02:00.0: restoring config space at offset 0x1c (was 0x101, writing 0x1f1) pcieport 0000:02:04.0: restoring config space at offset 0x18 (was 0x0, writing 0x6b3802) pcieport 0000:02:02.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407) pcieport 0000:02:00.0: restoring config space at offset 0x18 (was 0x0, writing 0x30302) pcieport 0000:02:01.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020) pcieport 0000:02:04.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020) pcieport 0000:02:00.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020) pcieport 0000:02:01.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407) pcieport 0000:02:04.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407) pcieport 0000:02:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407) xhci_hcd 0000:37:00.0: restoring config space at offset 0x10 (was 0x0, writing 0x73f00000) ... thunderbolt 0000:03:00.0: restoring config space at offset 0x14 (was 0x0, writing 0x8a040000) This is even worse. None of the mandatory delays are performed. If this would be S3 instead of s2idle then according to PCI FW spec 3.2 section 4.6.8. there is a specific _DSM that allows the OS to skip the delays but this platform does not provide the _DSM and does not go to S3 anyway so no firmware is involved that could already handle these delays. In this particular Intel Coffee Lake platform these delays are not actually needed because there is an additional delay as part of the ACPI power resource that is used to turn on power to the hierarchy but since that additional delay is not required by any of standards (PCIe, ACPI) it is not present in the Intel Ice Lake, for example where missing the mandatory delays causes pciehp to start tearing down the stack too early (links are not yet trained). For this reason, change the PCIe portdrv PM resume hooks so that they perform the mandatory delays before the downstream component gets resumed. We perform the delays before port services are resumed because otherwise pciehp might find that the link is not up (even if it is just training) and tears-down the hierarchy. Signed-off-by:
-
