Merge tag 'qcom-drivers-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers

Qualcomm driver updates for v6.6

Compatible and clock handling in the Qualcomm SCM driver is cleaned up,
together with a couple stylistic cleanups and transition to mark
exported symbols GPL only.

An abstraction for the RPM subsystem is introduced, to make align the
structure of the SMD and GLINK nodes thereof with the structure when a
remoteproc is involved. This is done to facilitate associating
additional entities with the RPM subsystem.

The qmp_send() API is modified to not expose hardware requirements onto
the client drivers, and then further extended to allow command
formatting directly in the API, to facilitate this typical use case.

In the Qualcomm Command DB driver, NUL characters previously included in
identifiers are dropped from the debugfs, to facilitate scripting.

The thresholds of the BWMON driver are simplified to avoid hard coded
starting values.

The OCMEM driver is updated with some cleanups and fixes, and addition
of MSM8226 support.

PMIC_GLINK gains support for retimer switches, safe mode is selected
when the cable is disconnected from altmode and the same is enabled for
SM8550.

An off-by-one string length check is corrected in the QMI encoder
decoder library.

The RPMh tracepoints are extended to include the state of the request,
to provide needed context in the traced events.

The series from Ulf creating a genpd framework is integrated, to
facilitate the other changes to the cpr, rpmpd and rpmhpd driver.
SDX75 support is added to the rpmhpd driver, and the rpmpd driver is
extended with the same sync_state logic found in the rpmhpd driver.

The socinfo driver gains knowledge about SM4450 and SM7125, the IPQ5019
platform is dropped.

Clock handling in the GSBI driver is cleaned up with the use of
devm_clk_get_enabled().

The list of VMIDs defined for the SCM assign memory interface is
extended.

* tag 'qcom-drivers-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (52 commits)
  soc: qcom: aoss: Tidy up qmp_send() callers
  soc: qcom: aoss: Format string in qmp_send()
  soc: qcom: aoss: Move length requirements from caller
  dt-bindings: firmware: qcom: scm: Updating VMID list
  dt-bindings: qcom: Update RPMHPD entries for some SoCs
  soc: qcom: qmi_encdec: Restrict string length in decode
  soc: qcom: smem: Fix incompatible types in comparison
  soc: qcom: ocmem: add missing clk_disable_unprepare() in ocmem_dev_probe()
  soc: qcom: socinfo: Add SoC ID for SM7125
  dt-bindings: arm: qcom,ids: Add SoC ID for SM7125
  dt-bindings: arm: qcom,ids: drop the IPQ5019 SoC ID
  soc: qcom: socinfo: drop the IPQ5019 SoC ID
  soc: qcom: socinfo: add SM4450 ID
  dt-bindings: arm: qcom,ids: add SoC ID for SM4450
  soc: qcom: pmic_glink: enable altmode for SM8550
  soc: qcom: pmic_glink_altmode: add retimer-switch support
  soc: qcom: pmic_glink_altmode: handle safe mode when disconnect
  soc: qcom: rpmhpd: Add SDX75 power domains
  dt-bindings: power: qcom,rpmpd: Add compatible for sdx75
  genpd: Makefile: build imx
  ...

Link: https://lore.kernel.org/r/20230818023338.2484467-1-andersson@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v6.6-rockchip-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/drivers

PD_VO powerdomain for rv1126 and disabling of the automatic switch between
sdmmc and jtag for rk3588 (makes sdmmc unreliable).

This includes the shared genpd-v6.5-rc1-1 tag from Ulf Hansson, which moves
the powerdomain drivers into a new genpd subsystem.

* tag 'v6.6-rockchip-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1
  genpd: rockchip: Add PD_VO entry for rv1126

Link: https://lore.kernel.org/r/40318909.XM6RcZxFsP@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

This patch fixes some sparse warnings about incorrect type.
The address about PCC communication space should use '__iomem' tag.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308151142.dH5Muhva-lkp@intel.com/
Fixes: 886bdf9c ("soc: hisilicon: Support HCCS driver on Kunpeng SoC")
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://lore.kernel.org/r/20230816073706.33297-1-lihuisong@huawei.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The Loongson-2's power management controller was ACPI, supports ACPI
S2Idle (Suspend To Idle), ACPI S3 (Suspend To RAM), ACPI S4 (Suspend To
Disk), ACPI S5 (Soft Shutdown) and supports multiple wake-up methods
(USB, GMAC, PWRBTN, etc.). This driver was to add power management
controller support that base on dts for Loongson-2 series SoCs.
Co-developed-by: Liu Yun <liuyun@loongson.cn>
Signed-off-by: Liu Yun <liuyun@loongson.cn>
Co-developed-by: Liu Peibao <liupeibao@loongson.cn>
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Cc: soc@kernel.org
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Link: https://lore.kernel.org/r/20230803063703.5659-3-zhuyinbo@loongson.cnSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Add the Loongson-2 SoC Power Management Controller binding with DT
schema format using json-schema.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230803063703.5659-2-zhuyinbo@loongson.cnSigned-off-by: Arnd Bergmann <arnd@arndb.de>

RK3588 has the same issue as other earlier RK SoCs. JTAG
functionality muxed to some SDMMC data pins causes issues with SDMMC
interface. Without this patch, I can only use SDMMC inteface
with bus-width = <1>. (JTAG is muxed to data pins D2 and D3)
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20230619011002.2249960-1-megi@xff.czSigned-off-by: Heiko Stuebner <heiko@sntech.de>

PD_VO power-domain entry in RV1126 are connected to
- BIU_VO
- VOP
- RGA
- IEP
- DSIHOST

Add an entry for it.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20230731110012.2913742-2-jagan@edgeble.aiSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Merge tag 'memory-controller-drv-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers

Memory controller drivers for v6.6

1. Tegra:
 - Extend support for Tegra234 SoC Memory Controllers with DRM and GPU
   clients.
 - Tegra186: Skip MRQ DVFS where it is not supported and do not fail
   probe.
2. Wide cleanup of DT includes.
3. Devicetree bindings:
 - Reference common peripheral (client) properties in Ingenic NEMC and
   TI GPMC.
 - Convert Davicom DM9000 to DT schema.

* tag 'memory-controller-drv-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
  memory: tegra: add MC client for Tegra234 GPU
  dt-bindings: net: davicom,dm9000: convert to DT schema
  dt-bindings: memory-controllers: reference TI GPMC peripheral properties
  dt-bindings: memory-controllers: ingenic,nemc: reference peripheral properties
  memory: Explicitly include correct DT includes
  memory: tegra: Prefer octal over symbolic permissions
  memory: tegra: add check if MRQ_EMC_DVFS_LATENCY is supported
  memory: tegra: Add clients used by DRM in Tegra234
  memory: tegra: sort tegra234_mc_clients table as per register offsets
  memory: tegra: make icc_set_bw return zero if BWMGR not supported
  memory: tegra: Add dummy implementation on Tegra194

Link: https://lore.kernel.org/r/20230814120052.27485-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ti-driver-soc-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers

TI SoC driver updates for v6.6

- Generic fixups: Explicitly include correct DT include.
- omap_prm: Cosmetic fixups for using devm_ api for ioremap_resource
- ti_sci: Documentation fixups, Using system_state to determine if
  polling is needed.
- k3-ringcc: Documentation fixups, cleanup of log messages, using
  devm_ to handle ioremap_resource.
- k3-socinfo: Add AM62PX detection.

* tag 'ti-driver-soc-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
  soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX
  soc: ti: Use devm_platform_ioremap_resource_byname simplify logic
  soc: ti: k3-ringacc: remove non-fatal probe deferral log
  soc: ti: Explicitly include correct DT includes
  soc: ti: omap-prm: Use devm_platform_get_and_ioremap_resource()
  soc: ti: k3-ringacc: Fixup documentation errors
  firmware: ti_sci: Fixup documentation errors
  firmware: ti_sci: Use system_state to determine polling

Link: https://lore.kernel.org/r/20230814160633.my3xbk5k2pxkvjyi@degreaseSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'oxnas-final-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/narmstrong/linux-oxnas into soc/drivers

Final OXNAS removal PR for v6.6:
- Remove irq-versatile-fpga compatible entry
- Mark irq-versatile-fpga oxnas compatible as deprecated
- Remove OXNAS maintainers entry

* tag 'oxnas-final-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/narmstrong/linux-oxnas:
  MAINTAINERS: remove OXNAS entry
  dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated
  irqchip: irq-versatile-fpga: remove obsolete oxnas compatible

Link: https://lore.kernel.org/r/3f91bb89-bf7b-d967-a302-2a8e1b0c3b01@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/drivers

i.MX drivers update for 6.6:

- A series from NXP i.MX developers (Peng Fan, etc.) to update imx-scu
  and imx-scu-irq firmware drivers.
- Add dedicated lockdep class for nested genpd locks to fix a lockdep
  warning in imx93-blk-ctrl driver.
- A change from Rob to explicitly include correct DT headers for i.MX
  SoC drivers.
- Use devm_platform_ioremap_resource() in imx-weim bus driver.

* tag 'imx-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
  firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
  firmware: imx: scu-irq: add imx_scu_irq_get_status
  firmware: imx: scu-irq: fix RCU complaint after M4 partition reset
  firmware: imx: scu: use EOPNOTSUPP
  firmware: imx: scu: use soc name for soc_id
  firmware: imx: scu: increase RPC timeout
  firmware: imx: scu: change init level to subsys_initcall_sync
  soc: imx: Explicitly include correct DT includes
  bus: imx-weim: use devm_platform_ioremap_resource
  soc: imx: imx93-blk-ctrl: Add dedicated lockdep class for nested genpd locks

Link: https://lore.kernel.org/r/20230813133354.847010-1-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

When the mailbox subsystem is disabled, the driver fails to link, so add
an explicit dependency. Some other drivers use 'select' here, but the
dependency seems more logical and more common.

Fixes: 886bdf9c ("soc: hisilicon: Support HCCS driver on Kunpeng SoC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Due to lack of maintenance and stall of development for a few years now,
and since no new features will ever be added upstream, remove MAINTAINERS
entry for OXNAS files.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20230814-topic-oxnas-upstream-remove-v3-3-e2ba579a49d3@linaro.orgSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>

Due to lack of maintenance and stall of development for a few years now,
and since no new features will ever be added upstream, mark the
OX810 and OX820 IRQ compatible as deprecated.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230814-topic-oxnas-upstream-remove-v3-2-e2ba579a49d3@linaro.orgSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>

Due to lack of maintenance and stall of development for a few years now,
and since no new features will ever be added upstream, remove support
for OX810 and OX820 IRQ controller.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20230814-topic-oxnas-upstream-remove-v3-1-e2ba579a49d3@linaro.orgSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>

With qmp_send() handling variable length messages and string formatting
he callers of qmp_send() can be cleaned up to not care about these
things.

Drop the QMP_MSG_LEN sized buffers and use the message formatting, as
appropriate.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811205839.727373-5-quic_bjorande@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The majority of callers to qmp_send() composes the message dynamically
using some form of sprintf(), resulting in unnecessary complication and
stack usage.

By changing the interface of qmp_send() to take a format string and
arguments, the duplicated composition of the commands can be moved to a
single location.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811205839.727373-4-quic_bjorande@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The existing implementation of qmp_send() requires the caller to provide
a buffer which is of word-aligned. The underlying reason for this is
that message ram only supports word accesses, but pushing this
requirement onto the clients results in the same boiler plate code
sprinkled in every call site.

By using a temporary buffer in qmp_send() we can hide the underlying
hardware limitations from the clients and allow them to pass their
NUL-terminates C string directly.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811205839.727373-2-quic_bjorande@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Printing a size_t using the %lu format string causes a warning on
architectures that define the type as 'unsigned int':

In file included from include/linux/device.h:15,
                 from include/linux/acpi.h:14,
                 from drivers/soc/hisilicon/kunpeng_hccs.c:25:
drivers/soc/hisilicon/kunpeng_hccs.c: In function 'hccs_get_bd_info':
drivers/soc/hisilicon/kunpeng_hccs.c:441:25: error: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]

Use the correct %zu format instead.

Fixes: 886bdf9c ("soc: hisilicon: Support HCCS driver on Kunpeng SoC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

HiSilicon driver updates for v6.6

- Add HCCS driver for HiSilicon Kunpeng SoC and document the sysfs description

* tag 'hisi-drivers-for-6.6' of https://github.com/hisilicon/linux-hisi:
  doc: soc: hisilicon: Add Kunpeng HCCS driver documentation
  soc: hisilicon: add sysfs entry to query information of HCCS
  soc: hisilicon: Support HCCS driver on Kunpeng SoC

Link: https://lore.kernel.org/r/64D605DE.2070303@hisilicon.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-drivers-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers

Samsung SoC driver changes for v6.6

Minor cleanup of headers and maintainer entries for Samsung SoC drivers.

* tag 'samsung-drivers-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  MAINTAINERS: mfd: Un-support Maxim and Samsung PMIC drivers
  MAINTAINERS: samsung: Un-support cpuidle and clock drivers
  soc: samsung: Explicitly include correct DT includes

Link: https://lore.kernel.org/r/20230810151250.220202-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Reset controller updates for v6.6

Clean up DT includes and remove unneeded platform_set_drvdata() calls
across reset drivers, add support for the Versal NET platform to the
zynqmp driver, and let the hisilicon driver use dev_err_probe().

* tag 'reset-for-v6.6' of git://git.pengutronix.de/pza/linux:
  reset: ti: syscon: remove unneeded call to platform_set_drvdata()
  reset: zynqmp: removed unneeded call to platform_set_drvdata()
  reset: zynq: remove unneeded call to platfrom_set_drvdata()
  reset: uniphier-glue: remove unneeded call to platform_set_drvdata()
  reset: npcm: remove unneeded call to platform_set_drvdata()
  reset: meson: remove unneeded call to platform_set_drvdata()
  reset: lpc18xx: remove unneeded call to platform_set_drvdata()
  reset: lantiq: remove unneeded call to platform_set_drvdata()
  reset: bcm6345: remove unneeded call to platform_set_drvdata()
  reset: ath79: remove unneeded call to platform_set_drvdata()
  reset: hisilicon: Use dev_err_probe instead of dev_err
  reset: reset-zynqmp: add support for Versal NET platform
  dt-bindings: reset: Updated binding for Versal-NET reset driver
  reset: Explicitly include correct DT includes

Link: https://lore.kernel.org/r/20230808145950.3057250-1-p.zabel@pengutronix.deSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-drivers-for-6.6-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/drivers

- simplify code in sunxi-rsb
- fix includes in sunxi_sram

* tag 'sunxi-drivers-for-6.6-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  soc: sunxi: Explicitly include correct DT includes
  bus: sunxi-rsb: Convert to devm_platform_ioremap_resource()

Link: https://lore.kernel.org/r/20230806180650.GA127142@jernej-laptopSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'amlogic-drivers-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers

Amlogic drivers changes for v6.6:
- Add C3 Power Domains
- Explicitly include correct DT includes in Amlogic SoC drivers
- fix to avoid potential NULL pointer dereference in meson_sm
- Merge of genpd-v6.5-rc1-1 to move genpd amlogic drivers

* tag 'amlogic-drivers-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
  firmware: meson_sm: fix to avoid potential NULL pointer dereference
  soc: amlogic: Explicitly include correct DT includes
  soc: c3: Add support for power domains controller
  dt-bindings: power: add Amlogic C3 power domains
  soc: amlogic: use name instead of index as criterion

Link: https://lore.kernel.org/r/77e328b5-0d47-36e8-f62d-c745df06fb87@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'scmi-updates-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers

Arm SCMI updates for v6.6

The main addition this time is the support for SCMI v3.2 perf level
indexing mode. SCMI v3.2 adds support for hardware which works on
performance indices, instead of levels. Certain platforms use indices
to identify performance levels. Level Indexing Mode is used to describe
such platform behavior. All commands which utilize performance level
as a parameter need to specify the corresponding level index instead of
the performance level when Level Indexing Mode is used.

While at it, these changes also include hardening of all the internal
accesses to the performance domain information.

* tag 'scmi-updates-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: arm_scmi: Add v3.2 perf level indexing mode support
  firmware: arm_scmi: Harden perf domain info access

Link: https://lore.kernel.org/r/20230804123231.3258141-1-sudeep.holla@arm.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'vexpress-updates-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers

Arm Vexpress updates for v6.6

Couple of minor updates: Code simplification in the vexpress config bus
driver with the use of devm_platform_ioremap_resource() and simplification
of Arm Vexpress platform and related drivers entries in MAINTAINERS file.

* tag 'vexpress-updates-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  MAINTAINERS: Simplify entries for Arm Vexpress platform and related drivers
  bus: vexpress-config: Convert to devm_platform_ioremap_resource()

Link: https://lore.kernel.org/r/20230804123214.3258032-1-sudeep.holla@arm.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arm64: ZynqMP SoC changes for 6.6

- Cleanup remove callback in event driver
- Explicitly include correct DT header in power driver
- Fix logic around irq = 0 in power driver

* tag 'zynqmp-soc-for-6.6' of https://github.com/Xilinx/linux-xlnx:
  soc: xilinx: Do not check for 0 return after calling platform_get_irq()
  soc: xilinx: Explicitly include correct DT includes
  driver: soc: xilinx: Convert to platform remove callback returning void

Link: https://lore.kernel.org/r/399efa45-df0a-4ec7-e25c-774bb8bf6fb4@monstr.euSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-6.6-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers

soc/tegra: Changes for v6.6-rc1

This contains a selection of minor cleanups.

* tag 'tegra-for-6.6-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: cbb: Remove unnecessary print function dev_err()
  soc/tegra: fuse: Sort includes alphabetically
  bus: tegra-gmi: Convert to devm_platform_ioremap_resource()
  soc/tegra: fuse: Use devm_platform_get_and_ioremap_resource()
  soc/tegra: Explicitly include correct DT includes

Link: https://lore.kernel.org/r/20230728094129.3587109-1-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

This adds JTAG ID info for the AM62PX so as to enable SoC detection in
kernel.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Link: https://lore.kernel.org/r/20230811170127.250733-1-vigneshr@ti.comSigned-off-by: Nishanth Menon <nm@ti.com>

Adding the full list of VMID's, which are used by different clients to
pass to the secure world.
Signed-off-by: Gokul krishna Krishnakumar <quic_gokukris@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230403204455.6758-1-quic_gokukris@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Record SCU wakeup interrupt in /sys/power/pm_wakeup_irq
The user can further identify the exact wakeup source by using the
following interface:
cat /sys/firmware/scu_wakeup_source/wakeup_src

The above will print the wake groups and the irqs that could have
contributed to waking up the kernel. For example if ON/OFF button was the
wakeup source:
cat /sys/firmware/scu_wakeup_source/wakeup_src
Wakeup source group = 3, irq = 0x1

The user can refer to the SCFW API documentation to identify all the
wake groups and irqs.
Signed-off-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Per SCFW update, update the IMX_SC_IRQ_NUM_GROUP to 9.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Extract the scu irq get status code from imx_scu_irq_work_handler and
make into a new function imx_scu_irq_get_status which could be used
by others, such as SECO.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Use blocking_notifier_chain instead of atomic_notifier_chain, otherwise
there will be RCU complaint, because unregister/register_virtio_device()
will issue mbox message.

mbox_send_message() is blocking again after received M4 partition reset.

Actually, no need atomic notifier for scu irq notification since this
notifier is called in worker instead of interrupt handler.

[  389.706645] i2c-rpmsg virtio0.rpmsg-i2c-channel.-1.2: i2c rpmsg driver is removed
[  389.767362] Wait for remote ready timeout, use first_notify.
[  389.774084] ------------[ cut here ]------------
[  389.778729] WARNING: CPU: 0 PID: 397 at kernel/rcu/tree_plugin.h:293 rcu_note_context_switch+0x34/0x338
[  389.788131] Modules linked in:
[  389.791195] CPU: 0 PID: 397 Comm: kworker/0:13 Not tainted 5.4.0-rc5-02977-g08f78722f07b #26
[  389.799633] Hardware name: Freescale i.MX8DXL MEK (DT)
[  389.805481] Workqueue: events imx_scu_irq_work_handler
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Per checkpatch.pl, "ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP"
So use EOPNOTSUPP to replace ENOTSUPP.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Same as soc-imx8m and soc-imx driver, use soc name for soc_id which is
user friendly.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

When system loading is high, we can meet some command timeout
issue occasionally, so increase the timeout to a safe value.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Change firmware init level to subsys_initcall_sync to ensure it's
probed before most devices to avoid unnecessary defer probe.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

platform_get_resource_byname() and devm_ioremap_resource() can be
replaced by devm_platform_ioremap_resource_byname(), which can
simplify the code logic a bit, No functional change here.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230809081523.26196-1-zhangzekun11@huawei.comSigned-off-by: Nishanth Menon <nm@ti.com>

This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Acked-by: Andrew Davis <afd@ti.com>
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Link: https://lore.kernel.org/r/20230807111534.12392-1-aboutphysycs@gmail.comSigned-off-by: Philipp Zabel <p.zabel@pengutronix.de>