- 08 Jan, 2020 9 commits
-
-
Olof Johansson authored
Merge tag 'aspeed-5.5-devicetree-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/fixes ASPEED device tree fixes for 5.5 Fixes for some badly applied patches that went in to 5.5. There is also a fix for an incorrect i2c address. * tag 'aspeed-5.5-devicetree-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: rainier: Fix fan fault and presence ARM: dts: aspeed: rainier: Remove duplicate i2c busses ARM: dts: aspeed: tacoma: Remove duplicate flash nodes ARM: dts: aspeed: tacoma: Remove duplicate i2c busses ARM: dts: aspeed: tacoma: Fix fsi master node ARM: dts: aspeed-g6: Fix FSI master location Link: https://lore.kernel.org/r/CACPK8XcjazgORXNZBU1ECMukXG4HA8D9VeDxiSPifDk_iB7_dw@mail.gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>
-
Arnd Bergmann authored
With the new omap_prm driver added unconditionally, omap2 builds fail when the reset controller subsystem is disabled: drivers/soc/ti/omap_prm.o: In function `omap_prm_probe': omap_prm.c:(.text+0x2d4): undefined reference to `devm_reset_controller_register' Link: https://lore.kernel.org/r/20191216132132.3330811-1-arnd@arndb.de Fixes: 3e99cb21 ("soc: ti: add initial PRM driver with reset control support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Arnd Bergmann authored
Selecting RESET_CONTROLLER is actually required, otherwise we can get a link failure in the clock driver: drivers/clk/davinci/psc.o: In function `__davinci_psc_register_clocks': psc.c:(.text+0x9a0): undefined reference to `devm_reset_controller_register' drivers/clk/davinci/psc-da850.o: In function `da850_psc0_init': psc-da850.c:(.text+0x24): undefined reference to `reset_controller_add_lookup' Link: https://lore.kernel.org/r/20191210195202.622734-1-arnd@arndb.de Fixes: f962396c ("ARM: davinci: support multiplatform build for ARM v5") Cc: <stable@vger.kernel.org> # v5.4 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Brandon Wyman authored
The PCA9552 used for fan fault and presence information is at address 61h, not 60h. Fixes: 2efc118c ("ARM: dts: aspeed: rainier: Add i2c devices") Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Joel Stanley authored
This is a revert of "ARM: dts: aspeed: rainier: Add i2c devices", which was already applied to the tree. Fixes: 9c44db70 ("ARM: dts: aspeed: rainier: Add i2c devices") Reviewed-by: Jim Wright <wrightj@linux.vnet.ibm.com> Tested-by: Jim Wright <wrightj@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Joel Stanley authored
This is a revert of "ARM: dts: aspeed: tacoma: Enable FMC and SPI devices" which was already applied as part of "ARM: dts: aspeed: Add Tacoma machine". Fixes: 8737481e ("ARM: dts: aspeed: tacoma: Enable FMC and SPI devices") Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Joel Stanley authored
This is a revert of "ARM: dts: aspeed: tacoma: Enable I2C busses", which was already applied as part of "ARM: dts: aspeed: Add Tacoma machine". Fixes: 606bcdde ("ARM: dts: aspeed: tacoma: Enable I2C busses") Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Joel Stanley authored
This was broken when applying "ARM: dts: aspeed: tacoma: Add host FSI description". Fixes: a981c933 ("ARM: dts: aspeed: tacoma: Add host FSI description") Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Joel Stanley authored
The FIS nodes were placed incorrectly in the device tree. Fixes: 0fe4e304 ("ARM: dts: aspeed-g6: Describe FSI masters") Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
- 07 Jan, 2020 1 commit
-
-
Olof Johansson authored
Merge tag 'omap-for-v5.5/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.5-rc cycle Here are few fixes for v5.5-rc cycle: - Two corner case fixes related to ti-sysc driver clock issues - Fixes for am57xx dts for pcie gpios - Beagle-x15 regulator dts fix - Fix for wkup_m3_ipc driver race * tag 'omap-for-v5.5/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: soc: ti: wkup_m3_ipc: Fix race condition with rproc_boot ARM: dts: beagle-x15-common: Model 5V0 regulator ARM: dts: am571x-idk: Fix gpios property to have the correct gpio number ARM: dts: am57xx-beagle-x15/am57xx-idk: Remove "gpios" for endpoint dt nodes bus: ti-sysc: Fix iterating over clocks ARM: OMAP2+: Fix ti_sysc_find_one_clockdomain to check for to_clk_hw_omap Link: https://lore.kernel.org/r/pull-1578418121-413328@atomide.comSigned-off-by: Olof Johansson <olof@lixom.net>
-
- 06 Jan, 2020 4 commits
-
-
Olof Johansson authored
Merge tag 'tee-optee-fix-for-5.5' of git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/fixes Fix OP-TEE multi page dynamic shm pool alloc * tag 'tee-optee-fix-for-5.5' of git://git.linaro.org:/people/jens.wiklander/linux-tee: optee: Fix multi page dynamic shm pool alloc Link: https://lore.kernel.org/r/20200103103710.GA3469@jaxSigned-off-by: Olof Johansson <olof@lixom.net>
-
Lubomir Rintel authored
The register blocks don't occupy 4K. In fact, some blocks are packed close to others and assuming they're 4K causes overlaps: pxa2xx-i2c d4033800.i2c: can't request region for resource [mem 0xd4033800-0xd40347ff] Link: https://lore.kernel.org/r/20191220071443.247183-1-lkundrak@v3.skSigned-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Lubomir Rintel authored
Determined empirically, no documentation is available. The OLPC XO-1.75 laptop used parent 1, that one being VCTCXO/4 (65MHz), but thought it's a VCTCXO/2 (130MHz). The mmp2 timer driver, not knowing what is going on, ended up just dividing the rate as of commit f36797ee ("ARM: mmp/mmp2: dt: enable the clock")' Link: https://lore.kernel.org/r/20191218190454.420358-3-lkundrak@v3.skSigned-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Lubomir Rintel authored
This was done because the clock driver returned the wrong rate, which is fixed in "clk: mmp2: Fix the order of timer mux parents" patch. Link: https://lore.kernel.org/r/20191218190454.420358-2-lkundrak@v3.skSigned-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 03 Jan, 2020 1 commit
-
-
Sumit Garg authored
optee_shm_register() expected pages to be passed as an array of page pointers rather than as an array of contiguous pages. So fix that via correctly passing pages as per expectation. Fixes: a249dd20 ("tee: optee: Fix dynamic shm pool allocations") Reported-by: Vincent Cao <vincent.t.cao@intel.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Tested-by: Vincent Cao <vincent.t.cao@intel.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
-
- 18 Dec, 2019 1 commit
-
-
Olof Johansson authored
Merge tag 'socfpga_dts_fix_for_v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes arm64: dts: agilex/stratix10: fix pmu interrupt numbers - Fix incorrect PMU interrupts numbers on the Agilex/Stratix10 platforms * tag 'socfpga_dts_fix_for_v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: agilex/stratix10: fix pmu interrupt numbers Link: https://lore.kernel.org/r/20191218161336.32377-1-dinguyen@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>
-
- 17 Dec, 2019 5 commits
-
-
Dave Gerlach authored
Any user of wkup_m3_ipc calls wkup_m3_ipc_get to get a handle and this checks the value of the static variable m3_ipc_state to see if the wkup_m3 is ready. Currently this is populated during probe before rproc_boot has been called, meaning there is a window of time that wkup_m3_ipc_get can return a valid handle but the wkup_m3 itself is not ready, leading to invalid IPC calls to the wkup_m3 and system instability. To avoid this, move the population of the m3_ipc_state variable until after rproc_boot has succeeded to guarantee a valid and usable handle is always returned. Reported-by: Suman Anna <s-anna@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Kishon Vijay Abraham I authored
On am57xx-beagle-x15, 5V0 is connected to P16, P17, P18 and P19 connectors. On am57xx-evm, 5V0 regulator is used to get 3V6 regulator which is connected to the COMQ port. Model 5V0 regulator here in order for it to be used in am57xx-evm to model 3V6 regulator. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Kishon Vijay Abraham I authored
commit d23f3839 ("ARM: dts: DRA7: Add pcie1 dt node for EP mode") while adding the dt node for EP mode for DRA7 platform, added rc node for am571x-idk and populated gpios property with "gpio3 23". However the GPIO_PCIE_SWRST line is actually connected to "gpio5 18". Fix it here. (The patch adding "gpio3 23" was tested with another am57x board in EP mode which doesn't rely on reset from host). Cc: stable <stable@vger.kernel.org> # 4.14+ Fixes: d23f3839 ("ARM: dts: DRA7: Add pcie1 dt node for EP mode") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Kishon Vijay Abraham I authored
PERST# line in the PCIE connector is driven by the host mode and not EP mode. The gpios property here is used for driving the PERST# line. Remove gpios property from all endpoint device tree nodes. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "I didn't get a batch in this weekend, so here's what we queued up last week and today. - A couple of defconfigs add back debugfs -- it used to be implicitly enabled through CONFIG_TRACING, but 0e4a459f ("tracing: Remove unnecessary DEBUG_FS dependency") removed that. - The rest are mostly minor fixlets of the usual kind; some DT tweaks, a headerfile refactor that needs a build fix now, etc" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits) ARM: bcm: Add missing sentinel to bcm2711_compat[] ARM: shmobile: defconfig: Restore debugfs support bus: ti-sysc: Fix missing reset delay handling ARM: imx: Fix boot crash if ocotp is not found ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS ARM: dts: imx6ul-evk: Fix peripheral regulator arm64: dts: ls1028a: fix reboot node ARM: mmp: include the correct cputype.h ARM: dts: am437x-gp/epos-evm: fix panel compatible arm64: dts: ls1028a: fix typo in TMU calibration data ARM: imx: Correct ocotp id for serial number support of i.MX6ULL/ULZ SoCs ARM: dts: bcm283x: Fix critical trip point ARM: omap2plus_defconfig: Add back DEBUG_FS ARM: omap2plus_defconfig: enable NET_SWITCHDEV ARM: dts: am335x-sancloud-bbe: fix phy mode bus: ti-sysc: Fix missing force mstandby quirk handling reset: Do not register resource data for missing resets reset: Fix {of,devm}_reset_control_array_get kerneldoc return types reset: brcmstb: Remove resource checks dt-bindings: reset: Fix brcmstb-reset example ...
-
- 16 Dec, 2019 10 commits
-
-
Tony Lindgren authored
Commit d878970f ("bus: ti-sysc: Add separate functions for handling clocks") separated handling of optional clocks from the main clocks, but introduced an issue where we do not necessarily allocate a slot for both fck and ick clocks, but still assume fixed slots for enumerating over the clocks. Let's fix the issue by ensuring we always have slots for both fck and ick even if we don't use ick, and don't attempt to enumerate optional clocks if not allocated. In the long run we might want to simplify things a bit by only allocating space only for the optional clocks as we have only few devices with optional clocks. Fixes: d878970f ("bus: ti-sysc: Add separate functions for handling clocks") Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
We must bail out early if the clock is not hw_omap. Otherwise we will try to access invalid address with hwclk->clkdm_name: Unable to handle kernel paging request at virtual address ffffffff Internal error: Oops: 27 [#1] ARM ... (strcmp) from [<c011b348>] (clkdm_lookup+0x40/0x60) [<c011b348>] (clkdm_lookup) from [<c011cb84>] (ti_sysc_clkdm_init+0x5c/0x64) [<c011cb84>] (ti_sysc_clkdm_init) from [<c03680a8>] (sysc_probe+0x948/0x117c) [<c03680a8>] (sysc_probe) from [<c03d0af4>] (platform_drv_probe+0x48/0x98) ... Fixes: 2b2f7def ("bus: ti-sysc: Add support for missing clockdomain handling") Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Dinh Nguyen authored
Fix up the correct interrupt numbers for the PMU unit on Agilex and Stratix10. Fixes: 78cd6a9d ("arm64: dts: Add base stratix 10 dtsi") Cc: linux-stable <stable@vger.kernel.org> Reported-by: Meng Li <Meng.Li@windriver.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
-
https://github.com/Broadcom/stblinuxOlof Johansson authored
This pull request contains Broadcom ARM-based SoCs machine fixes for 5.5-rc1, please pull the following: - H. Nikolaus adds a missing sentinel entry to the BCM2711 machine descriptor compatible array which would make multiplatform kernels fail to boot * tag 'arm-soc/for-5.5/soc-fixes' of https://github.com/Broadcom/stblinux: ARM: bcm: Add missing sentinel to bcm2711_compat[] Link: https://lore.kernel.org/r/20191216035701.15534-1-f.fainelli@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'samsung-fixes-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes Samsung fixes for v5.5 1. Restore debugfs support in exynos_defconfig (as now it is not selected as dependency of tracing). Debugfs is required by systemd and several tests. 2. Maintainers updates. * tag 'samsung-fixes-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: exynos_defconfig: Restore debugfs support MAINTAINERS: Include Samsung SoC serial driver in Samsung SoC entry MAINTAINERS: Update Lukasz Luba's email address Link: https://lore.kernel.org/r/20191215121316.32091-1-krzk@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'renesas-fixes-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes Renesas fixes for v5.5 - Restore debugfs support * tag 'renesas-fixes-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: shmobile: defconfig: Restore debugfs support Link: https://lore.kernel.org/r/20191213213719.18122-1-geert+renesas@glider.beSigned-off-by: Olof Johansson <olof@lixom.net>
-
Linus Torvalds authored
Merge tag 'linux-kselftest-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: - ftrace and safesetid test fixes from Masami Hiramatsu - Kunit fixes from Brendan Higgins, Iurii Zaikin, and Heidi Fahim - Kselftest framework fixes from SeongJae Park and Michael Ellerman * tag 'linux-kselftest-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kselftest: Support old perl versions kselftest/runner: Print new line in print of timeout log selftests: Fix dangling documentation references to kselftest_module.sh Documentation: kunit: add documentation for kunit_tool Documentation: kunit: fix typos and gramatical errors kunit: testing kunit: Bug fix in test_run_timeout function fs/ext4/inode-test: Fix inode test on 32 bit platforms. selftests: safesetid: Fix Makefile to set correct test program selftests: safesetid: Check the return value of setuid/setgid selftests: safesetid: Move link library to LDLIBS selftests/ftrace: Fix multiple kprobe testcase selftests/ftrace: Do not to use absolute debugfs path selftests/ftrace: Fix ftrace test cases to check unsupported selftests/ftrace: Fix to check the existence of set_ftrace_filter
-
Eric Auger authored
In case the new region gets merged into another one, the nr list node is freed. Checking its type while completing the merge algorithm leads to a use-after-free. Use new->type instead. Fixes: 4dbd258f ("iommu: Revisit iommu_insert_resv_region() implementation") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reported-by: Qian Cai <cai@lca.pw> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Cc: Stable <stable@vger.kernel.org> #v5.3+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
The "trivial conversion" in commit cccaa5e3 ("init: use do_mount() instead of ksys_mount()") was totally broken, since it didn't handle the case of a NULL mount data pointer. And while I had "tested" it (and presumably Dominik had too) that bug was hidden by me having options. Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Arnd Bergmann <arnd@arndb.de> Reported-by: Ondřej Jirman <megi@xff.cz> Reported-by: Guenter Roeck <linux@roeck-us.net> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-and-tested-by: Borislav Petkov <bp@suse.de> Tested-by: Chris Clayton <chris2553@googlemail.com> Tested-by: Eric Biggers <ebiggers@kernel.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
H. Nikolaus Schaller authored
commit 781fa0a9 ("ARM: bcm: Add support for BCM2711 SoC") breaks boot of many other platforms (e.g. OMAP or i.MX6) if CONFIG_ARCH_BCM2835 is enabled in addition to some multiplatform config (e.g. omap2plus_defconfig). The symptom is that the OMAP based board does not show any activity beyond "Starting Kernel ..." even with earlycon. Reverting the mentioned commit makes it work again. The real fix is to add the missing NULL sentinel to the bcm2711_compat[] variable-length array. Fixes: 781fa0a9 ("ARM: bcm: Add support for BCM2711 SoC") Acked-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-
- 15 Dec, 2019 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Doug Ledford: "A small collection of -rc fixes. Mostly. One API addition, but that's because we wanted to use it in a fix. There's also a bug fix that is going to render the 5.5 kernel's soft-RoCE driver incompatible with all soft-RoCE versions prior, but it's required to actually implement the protocol according to the RoCE spec and required in order for the soft-RoCE driver to be able to successfully work with actual RoCE hardware. Summary: - Update Steve Wise info - Fix for soft-RoCE crc calculations (will break back compatibility, but only with the soft-RoCE driver, which has had this bug since it was introduced and it is an on-the-wire bug, but will make soft-RoCE fully compatible with real RoCE hardware) - cma init fixup - counters oops fix - fix for mlx4 init/teardown sequence - fix for mkx5 steering rules - introduce a cleanup API, which isn't a fix, but we want to use it in the next fix - fix for mlx5 memory management that uses API in previous patch" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/mlx5: Fix device memory flows IB/core: Introduce rdma_user_mmap_entry_insert_range() API IB/mlx5: Fix steering rule of drop and count IB/mlx4: Follow mirror sequence of device add during device removal RDMA/counter: Prevent auto-binding a QP which are not tracked with res rxe: correctly calculate iCRC for unaligned payloads Update mailmap info for Steve Wise RDMA/cma: add missed unregister_pernet_subsys in init failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Paul Walmsley: "Two minor build fixes: - Fix builds of the ELF loader when built with 'make -j1' (nommu only) - Fix CONFIG_SOC_SIFIVE builds when CONFIG_TTY is disabled (found during randconfig testing)" * tag 'riscv/for-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: only select serial sifive if TTY is enabled riscv: Fix build dependency for loader
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: "Two fixes: one for a resource accounting bug in some configurations and a fix for another patch which went into rc1" * tag 'for-linus-5.5b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: fix ballooned page accounting without hotplug enabled xen-blkback: prevent premature module unload
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linuxLinus Torvalds authored
Pull ksys_mount() and ksys_dup() removal from Dominik Brodowski: "This small series replaces all in-kernel calls to the userspace-focused ksys_mount() and ksys_dup() with calls to kernel-centric functions: For each replacement of ksys_mount() with do_mount(), one needs to verify that the first and third parameter (char *dev_name, char *type) are strings allocated in kernelspace and that the fifth parameter (void *data) is either NULL or refers to a full page (only occurence in init/do_mounts.c::do_mount_root()). The second and fourth parameters (char *dir_name, unsigned long flags) are passed by ksys_mount() to do_mount() unchanged, and therefore do not require particular care. Moreover, instead of pretending to be userspace, the opening of /dev/console as stdin/stdout/stderr can be implemented using in-kernel functions as well. Thereby, ksys_dup() can be removed for good" [ This doesn't get rid of the special "kernel init runs with KERNEL_DS" case, but it at least removes _some_ of the users of "treat kernel pointers as user pointers for our magical init sequence". One day we'll hopefully be rid of it all, and can initialize our init_thread addr_limit to USER_DS. - Linus ] * 'remove-ksys-mount-dup' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux: fs: remove ksys_dup() init: unify opening /dev/console as stdin/stdout/stderr init: use do_mount() instead of ksys_mount() initrd: use do_mount() instead of ksys_mount() devtmpfs: use do_mount() instead of ksys_mount()
-
Linus Torvalds authored
Merge tag 'Wimplicit-fallthrough-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull fall through fix from Gustavo Silva: "Fix compile error on sh by marking expected switch fall-through" * tag 'Wimplicit-fallthrough-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: sh: kgdb: Mark expected switch fall-throughs
-
- 14 Dec, 2019 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "24 fixes, all in drivers. The lion's share (16) are qla2xxx and the rest are iscsi (3), ufs (2), smarpqi, lpfc and libsas" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: iscsi: Avoid potential deadlock in iscsi_if_rx func scsi: iscsi: Fix a potential deadlock in the timeout handler scsi: smartpqi: Update attribute name to `driver_version` scsi: libsas: stop discovering if oob mode is disconnected scsi: ufs: Disable autohibern8 feature in Cadence UFS scsi: iscsi: qla4xxx: fix double free in probe scsi: ufs: Give an unique ID to each ufs-bsg scsi: qla2xxx: Add debug dump of LOGO payload and ELS IOCB scsi: qla2xxx: Ignore PORT UPDATE after N2N PLOGI scsi: qla2xxx: Don't defer relogin unconditonally scsi: qla2xxx: Send Notify ACK after N2N PLOGI scsi: qla2xxx: Configure local loop for N2N target scsi: qla2xxx: Fix PLOGI payload and ELS IOCB dump length scsi: qla2xxx: Don't call qlt_async_event twice scsi: qla2xxx: Allow PLOGI in target mode scsi: qla2xxx: Change discovery state before PLOGI scsi: qla2xxx: Drop superfluous INIT_WORK of del_work scsi: qla2xxx: Initialize free_work before flushing it scsi: qla2xxx: Use explicit LOGO in target mode scsi: qla2xxx: Ignore NULL pointer in tcm_qla2xxx_free_mcmd ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are six small fixes for some reported char/misc driver issues: - fix build warnings with new 'awk' with the raid6 code - four interconnect driver bugfixes - binder fix for reported problem All of these except the binder fix have been in linux-next with no reported issues. The binder fix is "new" but Todd says it is good as he has tested it :)" * tag 'char-misc-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: binder: fix incorrect calculation for num_valid interconnect: qcom: msm8974: Walk the list safely on node removal interconnect: qcom: qcs404: Walk the list safely on node removal interconnect: qcom: sdm845: Walk the list safely on node removal interconnect: qcom: Fix Kconfig indentation lib: raid6: fix awk build warnings
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core fixes from Greg KH: "Here are two small driver core fixes to resolve some reported issues The first is to handle the much-reported (by the build systems) problem that superH does not boot anymore. The second handles an issue in the new platform logic that a number of people ran into with the automated tests in kbuild Both of these have been in linux-next with no reported issues" * tag 'driver-core-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: drivers: Fix boot problem on SuperH of/platform: Unconditionally pause/resume sync state during kernel init
-