- 31 Mar, 2021 8 commits
-
-
Paolo Abeni authored
Create a bunch of virtual topologies and verify that NETIF_F_GRO_FRAGLIST or NETIF_F_GRO_UDP_FWD-enabled devices aggregate the ingress packets as expected. Additionally check that the aggregate packets are segmented correctly when landing on a socket Also test SKB_GSO_FRAGLIST and SKB_GSO_UDP_L4 aggregation on top of UDP tunnel (vxlan) v1 -> v2: - hopefully clarify the commit message - moved the overlay network ipv6 range into the 'documentation' reserved range (Willem) Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
Similar to the previous commit, let even geneve passthrou the L4 GRO packets Signed-off-by:
-
Paolo Abeni authored
Similar to the previous commit, let even geneve passthrou the L4 GRO packets Signed-off-by:
-
Paolo Abeni authored
When passing up an UDP GSO packet with L4 aggregation, there is no need to segment it at the vxlan level. We can propagate the packet untouched and let it be segmented later, if needed. Introduce an helper to allow let the UDP socket to accept any L4 aggregation and use it in the vxlan driver. v1 -> v2: - updated to use the newly introduced UDP socket 'accept*' fields Signed-off-by:
-
Paolo Abeni authored
Currently the UDP protocol delivers GSO_FRAGLIST packets to the sockets without the expected segmentation. This change addresses the issue introducing and maintaining a couple of new fields to explicitly accept SKB_GSO_UDP_L4 or GSO_FRAGLIST packets. Additionally updates udp_unexpected_gso() accordingly. UDP sockets enabling UDP_GRO stil keep accept_udp_fraglist zeroed. v1 -> v2: - use 2 bits instead of a whole GSO bitmask (Willem) Fixes: 9fd1ff5d ("udp: Support UDP fraglist GRO/GSO.") Signed-off-by:
-
Paolo Abeni authored
After the previous patch, the stack can do L4 UDP aggregation on top of a UDP tunnel. In such scenario, udp{4,6}_gro_complete will be called twice. This function will enter its is_flist branch immediately, even though that is only correct on the second call, as GSO_FRAGLIST is only relevant for the inner packet. Instead, we need to try first UDP tunnel-based aggregation, if the GRO packet requires that. This patch changes udp{4,6}_gro_complete to skip the frag list processing when while encap_mark == 1, identifying processing of the outer tunnel header. Additionally, clears the field in udp_gro_complete() so that we can enter the frag list path on the next round, for the inner header. v1 -> v2: - hopefully clarified the commit message Reviewed-by: -
Paolo Abeni authored
If NETIF_F_GRO_FRAGLIST or NETIF_F_GRO_UDP_FWD are enabled, and there are UDP tunnels available in the system, udp_gro_receive() could end-up doing L4 aggregation (either SKB_GSO_UDP_L4 or SKB_GSO_FRAGLIST) at the outer UDP tunnel level for packets effectively carrying and UDP tunnel header. That could cause inner protocol corruption. If e.g. the relevant packets carry a vxlan header, different vxlan ids will be ignored/ aggregated to the same GSO packet. Inner headers will be ignored, too, so that e.g. TCP over vxlan push packets will be held in the GRO engine till the next flush, etc. Just skip the SKB_GSO_UDP_L4 and SKB_GSO_FRAGLIST code path if the current packet could land in a UDP tunnel, and let udp_gro_receive() do GRO via udp_sk(sk)->gro_receive. The check implemented in this patch is broader than what is strictly needed, as the existing UDP tunnel could be e.g. configured on top of a different device: we could end-up skipping GRO at-all for some packets. Anyhow, that is a very thin corner case and covering it will add quite a bit of complexity. v1 -> v2: - hopefully clarify the commit message Fixes: 9fd1ff5d ("udp: Support UDP fraglist GRO/GSO.") Fixes: 36707061 ("udp: allow forwarding of plain (non-fraglisted) UDP GRO packets") Reviewed-by:
-
Paolo Abeni authored
When UDP packets generated locally by a socket with UDP_SEGMENT traverse the following path: UDP tunnel(xmit) -> veth (segmentation) -> veth (gro) -> UDP tunnel (rx) -> UDP socket (no UDP_GRO) ip_summed will be set to CHECKSUM_PARTIAL at creation time and such checksum mode will be preserved in the above path up to the UDP tunnel receive code where we have: __iptunnel_pull_header() -> skb_pull_rcsum() -> skb_postpull_rcsum() -> __skb_postpull_rcsum() The latter will convert the skb to CHECKSUM_NONE. The UDP GSO packet will be later segmented as part of the rx socket receive operation, and will present a CHECKSUM_NONE after segmentation. Additionally the segmented packets UDP CB still refers to the original GSO packet len. Overall that causes unexpected/wrong csum validation errors later in the UDP receive path. We could possibly address the issue with some additional checks and csum mangling in the UDP tunnel code. Since the issue affects only this UDP receive slow path, let's set a suitable csum status there. Note that SKB_GSO_UDP_L4 or SKB_GSO_FRAGLIST packets lacking an UDP encapsulation present a valid checksum when landing to udp_queue_rcv_skb(), as the UDP checksum has been validated by the GRO engine. v2 -> v3: - even more verbose commit message and comments v1 -> v2: - restrict the csum update to the packets strictly needing them - hopefully clarify the commit message and code comments Signed-off-by:
-
- 30 Mar, 2021 32 commits
-
-
Jiapeng Chong authored
Fix the following whitescan warning: Calling "zlib_inflateEnd(&state->strm)" is only useful for its return value, which is ignored. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== net: remove repeated words This patch-set removes some repeated words in comments. ==================== Signed-off-by: -
Peng Li authored
Remove repeated words "that" and "the". Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Acked-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Peng Li authored
Remove repeated word "to". Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Peng Li authored
Remove repeated word "that". Signed-off-by:
-
Peng Li authored
Remove repeated words "to" and "try". Signed-off-by:
-
David S. Miller authored
Wang Qing says: ==================== Clean up obsolete TODO files It is mentioned in the official documents of the Linux Foundation and WIKI that you can participate in its development according to the TODO files of each module. But the TODO files here has not been updated for 15 years, and the function development described in the file have been implemented or abandoned. Its existence will mislead developers seeking to view outdated information. ==================== Signed-off-by: -
Wang Qing authored
The TODO file here has not been updated from 2005, and the function development described in the file have been implemented or abandoned. Its existence will mislead developers seeking to view outdated information. Signed-off-by:
Wang Qing <wangqing@vivo.com> Signed-off-by:
-
Wang Qing authored
The TODO file here has not been updated for 13 years, and the function development described in the file have been implemented or abandoned. Its existence will mislead developers seeking to view outdated information. Signed-off-by:
-
Wang Qing authored
The TODO file here has not been updated for 14 years, and the function development described in the file have been implemented or abandoned. Its existence will mislead developers seeking to view outdated information. Signed-off-by:
-
Wang Qing authored
The TODO file here has not been updated from 2005, and the function development described in the file have been implemented or abandoned. Its existence will mislead developers seeking to view outdated information. Signed-off-by:
-
Wang Qing authored
The TODO file here has not been updated from 2.6.12 for more than 15 years. Its existence will mislead developers seeking to view outdated information. Signed-off-by:
-
Wang Qing authored
The TODO file here has not been updated for 15 years, and the function development described in the file have been implemented or abandoned. Its existence will mislead developers seeking to view outdated information. Signed-off-by:
-
Yang Yingliang authored
It already has null pointer check in kfree_skb(), remove pointless pointer check before kfree_skb(). Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Wong Vee Khee authored
Cross time-stamping mechanism used in certain instance of Intel mGbE may run at different clock frequency in comparison to the clock frequency used by processor, so we introduce cross T/S frequency adjustment to ensure TSC calculation is correct when processor got the cross time-stamps. Signed-off-by:
Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by:
-
Shixin Liu authored
There's no need to declare a list and then init it manually, just use the LIST_HEAD() macro. Signed-off-by:
Shixin Liu <liushixin2@huawei.com> Signed-off-by:
-
Shixin Liu authored
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Changelog: From v1: 1. fix the mistake reported by kernel test robot. Signed-off-by:
-
David S. Miller authored
Andreas Roeseler says: ==================== add support for RFC 8335 PROBE The popular utility ping has several severe limitations, such as the inability to query specific interfaces on a node and requiring bidirectional connectivity between the probing and probed interfaces. RFC 8335 attempts to solve these limitations by creating the new utility PROBE which is a specialized ICMP message that makes use of the ICMP Extension Structure outlined in RFC 4884. This patchset adds definitions for the ICMP Extended Echo Request and Reply (PROBE) types for both IPV4 and IPV6, adds a sysctl to enable responses to PROBE messages, expands the list of supported ICMP messages to accommodate PROBE types, adds ipv6_dev_find into ipv6_stubs, and adds functionality to respond to PROBE requests. Changes: v1 -> v2: - Add AFI definitions - Switch to functions such as dev_get_by_name and ip_dev_find to lookup net devices v2 -> v3: Suggested by Willem de Bruijn <willemdebruijn.kernel@gmail.com> - Add verification of incoming messages before looking up netdev - Add prefix for PROBE specific defined variables - Use proc_dointvec_minmax with zero and one for sysctl - Create struct icmp_ext_echo_iio for parsing incoming packets Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> - Include net/addrconf.h library for ipv6_dev_find v3 -> v4: - Use in_addr instead of __be32 for storing IPV4 addresses - Use IFNAMSIZ to statically allocate space for name in icmp_ext_echo_iio Suggested by Willem de Bruijn <willemdebruijn.kernel@gmail.com> - Use skb_header_pointer to verify fields in incoming message - Add check to ensure that extobj_hdr.length is valid - Check to ensure object payload is padded with ASCII NULL characters when probing by name, as specified by RFC 8335 - Statically allocate buff using IFNAMSIZ - Add rcu blocking around ipv6_dev_find - Use __in_dev_get_rcu to access IPV4 addresses of identified net_device - Remove check for ICMPV6 PROBE types v4 -> v5: - Statically allocate buff to size IFNAMSIZ on declaration - Remove goto probe in favor of single branch - Remove strict check for incoming PROBE request padding to nearest 32-bit boundary Reported-by:
-
Andreas Roeseler authored
Modify the icmp_rcv function to check PROBE messages and call icmp_echo if a PROBE request is detected. Modify the existing icmp_echo function to respond ot both ping and PROBE requests. This was tested using a custom modification to the iputils package and wireshark. It supports IPV4 probing by name, ifindex, and probing by both IPV4 and IPV6 addresses. It currently does not support responding to probes off the proxy node (see RFC 8335 Section 2). The modification to the iputils package is still in development and can be found here: https://github.com/Juniper-Clinic-2020/iputils.git. It supports full sending functionality of PROBE requests, but currently does not parse the response messages, which is why Wireshark is required to verify the sent and recieved PROBE messages. The modification adds the ``-e'' flag to the command which allows the user to specify the interface identifier to query the probed host. An example usage would be <./ping -4 -e 1 [destination]> to send a PROBE request of ifindex 1 to the destination node. Signed-off-by:
Andreas Roeseler <andreas.a.roeseler@gmail.com> Signed-off-by:
-
Andreas Roeseler authored
Add ipv6_dev_find to ipv6_stub to allow lookup of net_devices by IPV6 address in net/ipv4/icmp.c. Signed-off-by:
-
Andreas Roeseler authored
Modify the ping_supported function to support PROBE message types. This allows tools such as the ping command in the iputils package to be modified to send PROBE requests through the existing framework for sending ping requests. Signed-off-by:
-
Andreas Roeseler authored
Section 8 of RFC 8335 specifies potential security concerns of responding to PROBE requests, and states that nodes that support PROBE functionality MUST be able to enable/disable responses and that responses MUST be disabled by default Signed-off-by:
-
Andreas Roeseler authored
Add definitions for the ICMPV6 type of Extended Echo Request and Extended Echo Reply, as defined by sections 2 and 3 of RFC 8335. Signed-off-by:
-
Andreas Roeseler authored
Add definitions for PROBE ICMP types and codes. Add AFI definitions for IP and IPV6 as specified by IANA Add a struct to represent the additional header when probing by IP address (ctype == 3) for use in parsing incoming PROBE messages Add a struct to represent the entire Interface Identification Object (IIO) section of an incoming PROBE packet Signed-off-by:
-
Andre Edich authored
The function lan87xx_config_aneg_ext was introduced to configure LAN95xxA but as well writes to undocumented register of LAN87xx. This fix prevents that access. The function lan87xx_config_aneg_ext gets more suitable for the new behavior name. Reported-by:
Måns Rullgård <mans@mansr.com> Fixes: 05b35e7e ("smsc95xx: add phylib support") Signed-off-by:
Andre Edich <andre.edich@microchip.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-next-for-5.13-20210330' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2021-03-30 this is a pull request of 39 patches for net-next/master. The first two patches update the MAINTAINERS file. One is by me and removes Dan Murphy from the from m_can and tcan4x5x. The other one is by Pankaj Sharma and updates the maintainership of the m-can mmio driver. The next three patches are by me and update the CAN echo skb handling. Vincent Mailhol provides 5 patches where Transmitter Delay Compensation is added CAN bittiming calculation is cleaned up. The next patch is by me and adds a missing HAS_IOMEM to the grcan driver. Michal Simek's patch for the xilinx driver add dev_err_probe() support. Arnd Bergmann's patch for the ucan driver fixes a compiler warning. Stephane Grosjean provides 3 patches for the peak USB drivers, which add ethtool set_phys_id and CAN one-shot mode. Xulin Sun's patch removes a not needed return check in the m-can driver. Torin Cooper-Bennun provides 3 patches for the m-can driver that add rx-offload support to ensure that skbs are sent from softirq context. Wan Jiabing's patch for the tcan4x5x driver removes a duplicate include. The next 6 patches are by me and target the mcp251xfd driver. They add devcoredump support, simplify the UINC handling, and add HW timestamp support. The remaining 12 patches target the c_can driver. The first 6 are by me and do generic checkpatch related cleanup work. Dario Binacchi's patches bring some cleanups and increase the number of usable message objects from 16 to 64. ==================== Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2021-03-29 Coexistence of CQE compression and HW PTP time-stamp: From Aya this series improves mlx5 netdev driver to allow both mlx5 CQE compression (RX descriptor compression, that saves on PCI transaction) and HW time-stamp PTP to co-exists. Prior to this series both features were mutually exclusive due to the nature of CQE compression which reduces the size of RX descriptor for the price of trimming some data, such as the time-stamp. In order to allow CQE compression when PTP time stamping is enabled, We enable it on the regular performance critical RX queues which will service all the data path traffic that is not PTP. PTP traffic will be re-directed to dedicated RX queues on which we will not enable CQE compression and thus keep the time-stamp intact. Having both features is critical for systems with low PCI BW, e.g. Multi-Host. The series will be adding: 1) Infrastructure to create a dedicated RX queue to service the PTP traffic 2) Flow steering plumbing to capture PTP traffic both UDP packets with destination port 319 and L2 packets with ethertype 0x88F7 3) Steer PTP traffic to the dedicated RX queue. 4) The feature will be enabled when PTP is being configured via the already existing PTP IOCTL when CQE compression is active, otherwise no change to the driver flow. ==================== Signed-off-by: -
Dario Binacchi authored
D_CAN controller supports 16, 32, 64 or 128 message objects, comparing to 32 on C_CAN. AM335x/AM437x Sitara processors and DRA7 SOC all instantiate a D_CAN controller with 64 message objects, as described in the "DCAN features" subsection of the CAN chapter of their technical reference manuals. The driver policy has been kept unchanged, and as in the previous version, the first half of the message objects is used for reception and the second for transmission. The I/O load is increased only in the case of 64 message objects, keeping it unchanged in the case of 32. Two 32-bit read accesses are in fact required, which however remained at 16-bit for configurations with 32 message objects. Link: https://lore.kernel.org/r/20210302215435.18286-7-dariobin@libero.itSigned-off-by:
Dario Binacchi <dariobin@libero.it> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Dario Binacchi authored
As pointed by commit c0a9f4d3 ("can: c_can: Reduce register access") the "driver casts the 16 message objects in stone, which is completely braindead as contemporary hardware has up to 128 message objects". The patch prepares the module to extend the number of message objects beyond the 32 currently managed. This was achieved by transforming the constants used to manage RX/TX messages into variables without changing the driver policy. Reported-by:
-
Dario Binacchi authored
The arbitration register is already set up with 32-bit writes in the other parts of the code except for this point. Link: https://lore.kernel.org/r/20210302215435.18286-5-dariobin@libero.itSigned-off-by:
-
Dario Binacchi authored
After reading the commit 640916db ("can: c_can: Make it SMP safe") it may sound strange to see the IF_RX interface used by the can_inval_tx_object function. A comment was added to avoid any misunderstanding. Link: https://lore.kernel.org/r/20210302215435.18286-4-dariobin@libero.itSigned-off-by:
-
Dario Binacchi authored
Commit 524369e2 ("can: c_can: remove obsolete STRICT_FRAME_ORDERING Kconfig option") left behind wrong indentation, fix it. Link: https://lore.kernel.org/r/20210302215435.18286-3-dariobin@libero.itSigned-off-by:
-
