- 13 May, 2024 8 commits
-
-
Boris Brezillon authored
This way get NULL derefs instead of use-after-free if the FW VM is referenced after the device has been unplugged. Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by:
Steven Price <steven.price@arm.com> Acked-by:
Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240502183813.1612017-4-boris.brezillon@collabora.com
-
Boris Brezillon authored
Avoids use-after-free situations when panthor_fw_unplug() is called and the kernel BO was mapped to the FW VM. Signed-off-by:
-
Boris Brezillon authored
If the FW reports an unrecoverable fault, we need to reset the GPU before we can start re-using it again. Signed-off-by:
-
Boris Brezillon authored
Make sure the user is aware that drm_panthor_tiler_heap_destroy::handle must be a handle previously returned by DRM_IOCTL_PANTHOR_TILER_HEAP_CREATE. v4: - Add Steve's R-b v3: - New patch Signed-off-by:
-
Boris Brezillon authored
The heap ID is used to index the heap context pool, and allocating in the [1:MAX_HEAPS_PER_POOL] leads to an off-by-one. This was originally to avoid returning a zero heap handle, but given the handle is formed with (vm_id << 16) | heap_id, with vm_id > 0, we already can't end up with a valid heap handle that's zero. v4: - s/XA_FLAGS_ALLOC1/XA_FLAGS_ALLOC/ v3: - Allocate in the [0:MAX_HEAPS_PER_POOL-1] range v2: - New patch Fixes: 9cca48fa ("drm/panthor: Add the heap logical block") Reported-by:
Eric Smith <eric.smith@collabora.com> Signed-off-by:
-
Boris Brezillon authored
The field used to store the chunk size if 12 bits wide, and the encoding is chunk_size = chunk_header.chunk_size << 12, which gives us a theoretical [4k:8M] range. This range is further limited by implementation constraints, and all known implementations seem to impose a [128k:8M] range, so do the same here. We also relax the power-of-two constraint, which doesn't seem to exist on v10. This will allow userspace to fine-tune initial/max tiler memory on memory-constrained devices. v4: - Actually fix the range in the kerneldoc v3: - Add R-bs - Fix valid range in the kerneldoc v2: - Turn the power-of-two constraint into a page-aligned constraint to allow fine-tune of the initial/max heap memory size - Fix the panthor_heap_create() kerneldoc Fixes: 9cca48fa ("drm/panthor: Add the heap logical block") Signed-off-by:
-
Boris Brezillon authored
It doesn't make sense to have a maximum number of chunks smaller than the initial number of chunks attached to the context. Fix the uAPI header to reflect the new constraint, and mention the undocumented "initial_chunk_count > 0" constraint while at it. v3: - Add R-b v2: - Fix the check Fixes: 9cca48fa ("drm/panthor: Add the heap logical block") Signed-off-by:
-
Antonino Maniscalco authored
If the kernel couldn't allocate memory because we reached the maximum number of chunks but no render passes are in flight (panthor_heap_grow() returning -ENOMEM), we should defer the OOM handling to the FW by returning a NULL chunk. The FW will then call the tiler OOM exception handler, which is supposed to implement incremental rendering (execute an intermediate fragment job to flush the pending primitives, release the tiler memory that was used to store those primitives, and start over from where it stopped). Instead of checking for both ENOMEM and EBUSY, make panthor_heap_grow() return ENOMEM no matter the reason of this allocation failure, the FW doesn't care anyway. v3: - Add R-bs v2: - Make panthor_heap_grow() return -ENOMEM for all kind of allocation failures - Document the panthor_heap_grow() semantics Fixes: de854881 ("drm/panthor: Add the scheduler logical block") Signed-off-by:
Antonino Maniscalco <antonino.maniscalco@collabora.com> Signed-off-by:
-
- 08 May, 2024 2 commits
-
-
Anatoliy Klymenko authored
Fix W=1 clang 19 compilation error in zynqmp_disp_layer_drm_formats(). Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404260946.4oZXvHD2-lkp@intel.com/Signed-off-by:
Anatoliy Klymenko <anatoliy.klymenko@amd.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Fixes: b0f0469a ("drm: xlnx: zynqmp_dpsub: Anounce supported input formats") Link: https://patchwork.freedesktop.org/patch/msgid/20240426-dp-live-fmt-fix-v3-2-e904b5ae51d7@amd.com (cherry picked from commit c7221175) Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de>
-
Anatoliy Klymenko authored
Fix arguments description for zynqmp_disp_layer_find_live_format() and zynqmp_disp_layer_set_live_format(). Reported-by:
-
- 02 May, 2024 19 commits
-
-
Sean Anderson authored
We must always register the DRM bridge, since zynqmp_dp_hpd_work_func calls drm_bridge_hpd_notify, which in turn expects hpd_mutex to be initialized. We do this before zynqmp_dpsub_drm_init since that calls drm_bridge_attach. This fixes the following lockdep warning: [ 19.217084] ------------[ cut here ]------------ [ 19.227530] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 19.227768] WARNING: CPU: 0 PID: 140 at kernel/locking/mutex.c:582 __mutex_lock+0x4bc/0x550 [ 19.241696] Modules linked in: [ 19.244937] CPU: 0 PID: 140 Comm: kworker/0:4 Not tainted 6.6.20+ #96 [ 19.252046] Hardware name: xlnx,zynqmp (DT) [ 19.256421] Workqueue: events zynqmp_dp_hpd_work_func [ 19.261795] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 19.269104] pc : __mutex_lock+0x4bc/0x550 [ 19.273364] lr : __mutex_lock+0x4bc/0x550 [ 19.277592] sp : ffffffc085c5bbe0 [ 19.281066] x29: ffffffc085c5bbe0 x28: 0000000000000000 x27: ffffff88009417f8 [ 19.288624] x26: ffffff8800941788 x25: ffffff8800020008 x24: ffffffc082aa3000 [ 19.296227] x23: ffffffc080d90e3c x22: 0000000000000002 x21: 0000000000000000 [ 19.303744] x20: 0000000000000000 x19: ffffff88002f5210 x18: 0000000000000000 [ 19.311295] x17: 6c707369642e3030 x16: 3030613464662072 x15: 0720072007200720 [ 19.318922] x14: 0000000000000000 x13: 284e4f5f4e524157 x12: 0000000000000001 [ 19.326442] x11: 0001ffc085c5b940 x10: 0001ff88003f388b x9 : 0001ff88003f3888 [ 19.334003] x8 : 0001ff88003f3888 x7 : 0000000000000000 x6 : 0000000000000000 [ 19.341537] x5 : 0000000000000000 x4 : 0000000000001668 x3 : 0000000000000000 [ 19.349054] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff88003f3880 [ 19.356581] Call trace: [ 19.359160] __mutex_lock+0x4bc/0x550 [ 19.363032] mutex_lock_nested+0x24/0x30 [ 19.367187] drm_bridge_hpd_notify+0x2c/0x6c [ 19.371698] zynqmp_dp_hpd_work_func+0x44/0x54 [ 19.376364] process_one_work+0x3ac/0x988 [ 19.380660] worker_thread+0x398/0x694 [ 19.384736] kthread+0x1bc/0x1c0 [ 19.388241] ret_from_fork+0x10/0x20 [ 19.392031] irq event stamp: 183 [ 19.395450] hardirqs last enabled at (183): [<ffffffc0800b9278>] finish_task_switch.isra.0+0xa8/0x2d4 [ 19.405140] hardirqs last disabled at (182): [<ffffffc081ad3754>] __schedule+0x714/0xd04 [ 19.413612] softirqs last enabled at (114): [<ffffffc080133de8>] srcu_invoke_callbacks+0x158/0x23c [ 19.423128] softirqs last disabled at (110): [<ffffffc080133de8>] srcu_invoke_callbacks+0x158/0x23c [ 19.432614] ---[ end trace 0000000000000000 ]--- Fixes: eb2d64bf ("drm: xlnx: zynqmp_dpsub: Report HPD through the bridge") Signed-off-by:
Sean Anderson <sean.anderson@linux.dev> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Luca Ceresoli authored
This reverts commit 8a91b29f. The regulator_disable() added by the original commit solves one kind of regulator imbalance but adds another one as it allows the regulator to be disabled one more time than it is enabled in the following scenario: 1. Start video pipeline -> sn65dsi83_atomic_pre_enable -> regulator_enable 2. PLL lock fails -> regulator_disable 3. Stop video pipeline -> sn65dsi83_atomic_disable -> regulator_disable The reason is clear from the code flow, which looks like this (after removing unrelated code): static void sn65dsi83_atomic_pre_enable() { regulator_enable(ctx->vcc); if (PLL failed locking) { regulator_disable(ctx->vcc); <---- added by patch being reverted return; } } static void sn65dsi83_atomic_disable() { regulator_disable(ctx->vcc); } The use case for introducing the additional regulator_disable() was removing the module for debugging (see link below for the discussion). If the module is removed after a .atomic_pre_enable, i.e. with an active pipeline from the DRM point of view, .atomic_disable is not called and thus the regulator would not be disabled. According to the discussion however there is no actual use case for removing the module with an active pipeline, except for debugging/development. On the other hand, the occurrence of a PLL lock failure is possible due to any physical reason (e.g. a temporary hardware failure for electrical reasons) so handling it gracefully should be supported. As there is no way for .atomic[_pre]_enable to report an error to the core, the only clean way to support it is calling regulator_disabled() only in .atomic_disable, unconditionally, as it was before. Link: https://lore.kernel.org/all/15244220.uLZWGnKmhe@steina-w/ Fixes: 8a91b29f ("drm/bridge: ti-sn65dsi83: Fix enable error path") Reviewed-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by:
Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by:
Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240426122259.46808-1-luca.ceresoli@bootlin.com (cherry picked from commit 2940ee03) Signed-off-by:
-
Jocelyn Falempe authored
plane->state and plane->state->fb can be NULL, so add a check before dereferencing them. Found by testing with the imx driver. Fixes: 879b3b65 ("drm/fb_dma: Add generic get_scanout_buffer() for drm_panic") Signed-off-by:
Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by:
-
Thomas Zimmermann authored
Framebuffer memory is allocated via vzalloc() from non-contiguous physical pages. The physical framebuffer start address is therefore meaningless. Do not set it. The value is not used within the kernel and only exported to userspace on dedicated ARM configs. No functional change is expected. v2: - refer to vzalloc() in commit message (Javier) Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
Zack Rusin <zack.rusin@broadcom.com> Reviewed-by:
Sui Jingfeng <sui.jingfeng@linux.dev> Tested-by:
Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-2-tzimmermann@suse.de (cherry picked from commit 73ef0aec) Signed-off-by:
-
Boris Brezillon authored
In the post_reset function, if the fast reset didn't succeed, we are not clearing the fast_reset flag, which prevents firmware sections from being reloaded. While at it, use panthor_fw_stop() instead of manually writing DISABLE to the MCU_CONTROL register. Fixes: 2718d918 ("drm/panthor: Add the FW logical block") Signed-off-by:
-
Boris Brezillon authored
When we check for state values returned by the FW, we only cover part of the 0:7 range. Make sure we catch FW inconsistencies by adding a default to the switch statement, and flagging the group state as unknown in that case. When an unknown state is detected, we trigger a reset, and consider the group as unusable after that point, to prevent the potential corruption from creeping in other places if we continue executing stuff on this context. v2: - Add Steve's R-b - Fix commit message Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/dri-devel/3b7fd2f2-679e-440c-81cd-42fc2573b515@moroto.mountain/T/#uSuggested-by:
-
Masahiro Yamada authored
When you create a submenu using the 'menu' syntax, there is no ambiguity about its end because the code between 'menu' and 'endmenu' becomes the submenu. In contrast, 'menuconfig' does not have the corresponding end marker. Instead, the end of the submenu is inferred from symbol dependencies. This is detailed in Documentation/kbuild/kconfig-language.rst, starting line 348. It outlines two methods to place the code under the submenu: (1) Open an if-block immediately after 'menuconfig', enclosing the submenu content within it (2) Add 'depends on' to every symbol intended for the submenu Many subsystems opt for (1) because it reliably maintains the submenu structure. The DRM subsystem adopts (2). The submenu ends when the sequence of 'depends on DRM' breaks. It can be confirmed by running a GUI frontend such as 'make menuconfig' and visiting the DRM menu: < > Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) ---- If you toggle this, you will notice most of the DRM-related options appear below it, not in the submenu. I highly recommend the approach (1). Obviously, (2) is not reliable, as the submenu breaks whenever someone forgets to add 'depends on DRM'. This commit encloses the entire DRM configuration with 'if DRM' and 'endif', except for DRM_PANEL_ORIENTATION_QUIRKS. Note: Now, 'depends on DRM' properties inside the if-block are all redundant. I leave it as follow-up cleanups. Signed-off-by:Masahiro Yamada <masahiroy@kernel.org> Acked-by:
Arnd Bergmann <arnd@arndb.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240426135602.2500125-1-masahiroy@kernel.orgSigned-off-by:
-
Geert Uytterhoeven authored
This reverts commit d674858f, as helper code should always be selected by the driver that needs it, for the convenience of the final user configuring a kernel. The user who configures a kernel should not need to know which helpers are needed for the driver he is interested in. Making a driver depend on helper code means that the user needs to know which helpers to enable first, which is very user-unfriendly. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
-
Geert Uytterhoeven authored
This reverts commit c0e0f139, as helper code should always be selected by the driver that needs it, for the convenience of the final user configuring a kernel. The user who configures a kernel should not need to know which helpers are needed for the driver he is interested in. Making a driver depend on helper code means that the user needs to know which helpers to enable first, which is very user-unfriendly. Signed-off-by:
-
Geert Uytterhoeven authored
This reverts commit e075e496, as helper code should always be selected by the driver that needs it, for the convenience of the final user configuring a kernel. The user who configures a kernel should not need to know which helpers are needed for the driver he is interested in. Making a driver depend on helper code means that the user needs to know which helpers to enable first, which is very user-unfriendly. Signed-off-by:
-
Geert Uytterhoeven authored
This reverts commit 4d15125d, as helper code should always be selected by the driver that needs it, for the convenience of the final user configuring a kernel. The user who configures a kernel should not need to know which helpers are needed for the driver he is interested in. Making a driver depend on helper code means that the user needs to know which helpers to enable first, which is very user-unfriendly. Signed-off-by:
-
Geert Uytterhoeven authored
This reverts commit 0323287d, as helper code should always be selected by the driver that needs it, for the convenience of the final user configuring a kernel. The user who configures a kernel should not need to know which helpers are needed for the driver he is interested in. Making a driver depend on helper code means that the user needs to know which helpers to enable first, which is very user-unfriendly. Signed-off-by:
-
Geert Uytterhoeven authored
This reverts commit 3166e7e6, as helper code should always be selected by the driver that needs it, for the convenience of the final user configuring a kernel. The user who configures a kernel should not need to know which helpers are needed for the driver he is interested in. Making a driver depend on helper code means that the user needs to know which helpers to enable first, which is very user-unfriendly. Signed-off-by:
-
Geert Uytterhoeven authored
This reverts commit f6d2dc03, as helper code should always be selected by the driver that needs it, for the convenience of the final user configuring a kernel. The user who configures a kernel should not need to know which helpers are needed for the driver he is interested in. Making a driver depend on helper code means that the user needs to know which helpers to enable first, which is very user-unfriendly. Signed-off-by:
-
Geert Uytterhoeven authored
This reverts commit d1ef8fc1, as the commit it fixes will be reverted, too. Signed-off-by:
-
Geert Uytterhoeven authored
This reverts commit 0209df3b, as the commit it fixes (which is BTW not the commit in the Fixes: tag!) will be reverted, too. Signed-off-by:
-
Geert Uytterhoeven authored
This reverts commit 7fa678cc, as the commit it fixes will be reverted, too. Signed-off-by:
-
Geert Uytterhoeven authored
This reverts commit a57e191e, as the commits it fixes will be reverted, too. Signed-off-by:
-
Boris Brezillon authored
We can use upd_ctx.timedout_mask directly, and the faulty_slots update in the flush_caches_failed situation is never used. Suggested-by:
-
- 30 Apr, 2024 2 commits
-
-
Dave Airlie authored
Merge tag 'amd-drm-next-6.10-2024-04-26' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.10-2024-04-26: amdgpu: - Misc code cleanups and refactors - Support setting reset method at runtime - Report OD status - SMU 14.0.1 fixes - SDMA 4.4.2 fixes - VPE fixes - MES fixes - Update BO eviction priorities - UMSCH fixes - Reset fixes - Freesync fixes - GFXIP 9.4.3 fixes - SDMA 5.2 fixes - MES UAF fix - RAS updates - Devcoredump updates for dumping IP state - DSC fixes - JPEG fix - Fix VRAM memory accounting - VCN 5.0 fixes - MES fixes - UMC 12.0 updates - Modify contiguous flags handling - Initial support for mapping kernel queues via MES amdkfd: - Fix rescheduling of restore worker - VRAM accounting for SVM migrations - mGPU fix - Enable SQ watchpoint for gfx10 Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240426221245.1613332-1-alexander.deucher@amd.com
-
Dave Airlie authored
Merge tag 'drm-intel-gt-next-2024-04-26' of https://anongit.freedesktop.org/git/drm/drm-intel into drm-next UAPI Changes: - drm/i915/guc: Use context hints for GT frequency Allow user to provide a low latency context hint. When set, KMD sends a hint to GuC which results in special handling for this context. SLPC will ramp the GT frequency aggressively every time it switches to this context. The down freq threshold will also be lower so GuC will ramp down the GT freq for this context more slowly. We also disable waitboost for this context as that will interfere with the strategy. We need to enable the use of SLPC Compute strategy during init, but it will apply only to contexts that set this bit during context creation. Userland can check whether this feature is supported using a new param- I915_PARAM_HAS_CONTEXT_FREQ_HINT. This flag is true for all guc submission enabled platforms as they use SLPC for frequency management. The Mesa usage model for this flag is here - https://gitlab.freedesktop.org/sushmave/mesa/-/commits/compute_hint - drm/i915/gt: Enable only one CCS for compute workload Enable only one CCS engine by default with all the compute sices allocated to it. While generating the list of UABI engines to be exposed to the user, exclude any additional CCS engines beyond the first instance *** NOTE: This W/A will make all DG2 SKUs appear like single CCS SKUs by default to mitigate a hardware bug. All the EUs will still remain usable, and all the userspace drivers have been confirmed to be able to dynamically detect the change in number of CCS engines and adjust. For the smaller percent of applications that get perf benefit from letting the userspace driver dispatch across all 4 CCS engines we will be introducing a sysfs control as a later patch to choose 4 CCS each with 25% EUs (or 50% if 2 CCS). NOTE: A regression has been reported at https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10895 However Andi has been triaging the issue and we're closing in a fix to the gap in the W/A implementation: https://lists.freedesktop.org/archives/intel-gfx/2024-April/348747.html Driver Changes: - Add new and fix to existing workarounds: Wa_14018575942 (MTL), Wa_16019325821 (Gen12.70), Wa_14019159160 (MTL), Wa_16015675438, Wa_14020495402 (Gen12.70) (Tejas, John, Lucas) - Fix UAF on destroy against retire race and remove two earlier partial fixes (Janusz) - Limit the reserved VM space to only the platforms that need it (Andi) - Reset queue_priority_hint on parking for execlist platforms (Chris) - Fix gt reset with GuC submission is disabled (Nirmoy) - Correct capture of EIR register on hang (John) - Remove usage of the deprecated ida_simple_xx() API - Refactor confusing __intel_gt_reset() (Nirmoy) - Fix the fix for GuC reset lock confusion (John) - Simplify/extend platform check for Wa_14018913170 (John) - Replace dev_priv with i915 (Andi) - Add and use gt_to_guc() wrapper (Andi) - Remove bogus null check (Rodrigo, Dan) . Selftest improvements (Janusz, Nirmoy, Daniele) Signed-off-by:
-
- 29 Apr, 2024 1 commit
-
-
Daniel Vetter authored
Thomas needs the defio fixes, Maíra needs the vkms fixes and Joonas has some fun with i915-gem conflicts. Signed-off-by:Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 28 Apr, 2024 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: - Fix EEVDF corner cases - Fix two nohz_full= related bugs that can cause boot crashes and warnings * tag 'sched-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/isolation: Fix boot crash when maxcpus < first housekeeping CPU sched/isolation: Prevent boot crash when the boot CPU is nohz_full sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf() sched/eevdf: Fix miscalculation in reweight_entity() when se is not curr sched/eevdf: Always update V if se->on_rq when reweighting
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: - Make the CPU_MITIGATIONS=n interaction with conflicting mitigation-enabling boot parameters a bit saner. - Re-enable CPU mitigations by default on non-x86 - Fix TDX shared bit propagation on mprotect() - Fix potential show_regs() system hang when PKE initialization is not fully finished yet. - Add the 0x10-0x1f model IDs to the Zen5 range - Harden #VC instruction emulation some more * tag 'x86-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu: Ignore "mitigations" kernel parameter if CPU_MITIGATIONS=n cpu: Re-enable CPU mitigations by default for !X86 architectures x86/tdx: Preserve shared bit on mprotect() x86/cpu: Fix check for RDPKRU in __show_regs() x86/CPU/AMD: Add models 0x10-0x1f to the Zen5 range x86/sev: Check for MWAITX and MONITORX opcodes in the #VC handler
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Ingo Molnar: "Fix a double free bug in the init error path of the GICv3 irqchip driver" * tag 'irq-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Prevent double free on error
-
Oleg Nesterov authored
housekeeping_setup() checks cpumask_intersects(present, online) to ensure that the kernel will have at least one housekeeping CPU after smp_init(), but this doesn't work if the maxcpus= kernel parameter limits the number of processors available after bootup. For example, a kernel with "maxcpus=2 nohz_full=0-2" parameters crashes at boot time on a virtual machine with 4 CPUs. Change housekeeping_setup() to use cpumask_first_and() and check that the returned CPU number is valid and less than setup_max_cpus. Another corner case is "nohz_full=0" on a machine with a single CPU or with the maxcpus=1 kernel argument. In this case non_housekeeping_mask is empty and tick_nohz_full_setup() makes no sense. And indeed, the kernel hits the WARN_ON(tick_nohz_full_running) in tick_sched_do_timer(). And how should the kernel interpret the "nohz_full=" parameter? It should be silently ignored, but currently cpulist_parse() happily returns the empty cpumask and this leads to the same problem. Change housekeeping_setup() to check cpumask_empty(non_housekeeping_mask) and do nothing in this case. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Reviewed-by:
Phil Auld <pauld@redhat.com> Acked-by:
Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20240413141746.GA10008@redhat.com
-
Oleg Nesterov authored
Documentation/timers/no_hz.rst states that the "nohz_full=" mask must not include the boot CPU, which is no longer true after: 08ae95f4 ("nohz_full: Allow the boot CPU to be nohz_full"). However after: aae17ebb ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work") the kernel will crash at boot time in this case; housekeeping_any_cpu() returns an invalid CPU number until smp_init() brings the first housekeeping CPU up. Change housekeeping_any_cpu() to check the result of cpumask_any_and() and return smp_processor_id() in this case. This is just the simple and backportable workaround which fixes the symptom, but smp_processor_id() at boot time should be safe at least for type == HK_TYPE_TIMER, this more or less matches the tick_do_timer_boot_cpu logic. There is no worry about cpu_down(); tick_nohz_cpu_down() will not allow to offline tick_do_timer_cpu (the 1st online housekeeping CPU). Fixes: aae17ebb ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work") Reported-by:
Chris von Recklinghausen <crecklin@redhat.com> Signed-off-by:
-
- 27 Apr, 2024 2 commits
-
-
https://github.com/Rust-for-Linux/linuxLinus Torvalds authored
Pull Rust fixes from Miguel Ojeda: - Soundness: make internal functions generated by the 'module!' macro inaccessible, do not implement 'Zeroable' for 'Infallible' and require 'Send' for the 'Module' trait. - Build: avoid errors with "empty" files and workaround 'rustdoc' ICE. - Kconfig: depend on '!CFI_CLANG' and avoid selecting 'CONSTRUCTORS'. - Code docs: remove non-existing key from 'module!' macro example. - Docs: trivial rendering fix in arch table. * tag 'rust-fixes-6.9' of https://github.com/Rust-for-Linux/linux: rust: remove `params` from `module` macro example kbuild: rust: force `alloc` extern to allow "empty" Rust files kbuild: rust: remove unneeded `@rustc_cfg` to avoid ICE rust: kernel: require `Send` for `Module` implementations rust: phy: implement `Send` for `Registration` rust: make mutually exclusive with CFI_CLANG rust: macros: fix soundness issue in `module!` macro rust: init: remove impl Zeroable for Infallible docs: rust: fix improper rendering in Arch Support page rust: don't select CONSTRUCTORS
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: - A fix for TASK_SIZE on rv64/NOMMU, to reflect the lack of user/kernel separation - A fix to avoid loading rv64/NOMMU kernel past the start of RAM - A fix for RISCV_HWPROBE_EXT_ZVFHMIN on ilp32 to avoid signed integer overflow in the bitmask - The sud_test kselftest has been fixed to properly swizzle the syscall number into the return register, which are not the same on RISC-V - A fix for a build warning in the perf tools on rv32 - A fix for the CBO selftests, to avoid non-constants leaking into the inline asm - A pair of fixes for T-Head PBMT errata probing, which has been renamed MAE by the vendor * tag 'riscv-for-linus-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: selftests: cbo: Ensure asm operands match constraints, take 2 perf riscv: Fix the warning due to the incompatible type riscv: T-Head: Test availability bit before enabling MAE errata riscv: thead: Rename T-Head PBMT to MAE selftests: sud_test: return correct emulated syscall value on RISC-V riscv: hwprobe: fix invalid sign extension for RISCV_HWPROBE_EXT_ZVFHMIN riscv: Fix loading 64-bit NOMMU kernels past the start of RAM riscv: Fix TASK_SIZE on 64-bit NOMMU
-
