MultiPort E-Switch builds on newer hardware's capabilities and introduces
a mode where a single E-Switch is used and all the vports and physical
ports on the NIC are connected to it.

The new mode will allow in the future a decrease in the memory used by the
driver and advanced features that aren't possible today.

This represents a big change in the current E-Switch implantation in mlx5.
Currently, by default, each E-Switch manager manages its E-Switch.
Steering rules in each E-Switch can only forward traffic to the native
physical port associated with that E-Switch. While there are ways to target
non-native physical ports, for example using a bond or via special TC
rules. None of the ways allows a user to configure the driver
to operate by default in such a mode nor can the driver decide
to move to this mode by default as it's user configuration-driven right now.

While MultiPort E-Switch single FDB mode is the preferred mode, older
generations of ConnectX hardware couldn't support this mode so it was never
implemented. Now that there is capable hardware present, start the
transition to having this mode by default.

Introduce a devlink parameter to control MultiPort E-Switch single FDB mode.
This will allow users to select this mode on their system right now
and in the future will allow the driver to move to this mode by default.

Example:
    $ devlink dev param set pci/0000:00:0b.0 name esw_multiport value 1 \
                  cmode runtime
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The change on network namespace only makes sense during re-init reload
action. For FW activation it is not applicable. So check if user passed
an ATTR indicating network namespace change request and forbid it.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230213115836.3404039-1-jiri@resnulli.usSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Completion responses to SEND_RNDIS_PKT messages are currently processed
regardless of the status in the response, so that resources associated
with the request are freed.  While this is appropriate, code bugs that
cause sending a malformed message, or errors on the Hyper-V host, go
undetected. Fix this by checking the status and outputting a rate-limited
message if there is an error.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/1676264881-48928-1-git-send-email-mikelley@microsoft.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Oz Shlomo says:

====================
add support for per action hw stats

There are currently two mechanisms for populating hardware stats:
1. Using flow_offload api to query the flow's statistics.
   The api assumes that the same stats values apply to all
   the flow's actions.
   This assumption breaks when action drops or jumps over following
   actions.
2. Using hw_action api to query specific action stats via a driver
   callback method. This api assures the correct action stats for
   the offloaded action, however, it does not apply to the rest of the
   actions in the flow's actions array, as elaborated below.

The current hw_action api does not apply to the following use cases:
1. Actions that are implicitly created by filters (aka bind actions).
   In the following example only one counter will apply to the rule:
   tc filter add dev $DEV prio 2 protocol ip parent ffff: \
        flower ip_proto tcp dst_ip $IP2 \
        action police rate 1mbit burst 100k conform-exceed drop/pipe \
        action mirred egress redirect dev $DEV2

2. Action preceding a hw action.
   In the following example the same flow stats will apply to the sample and
   mirred actions:
    tc action add police rate 1mbit burst 100k conform-exceed drop / pipe
    tc filter add dev $DEV prio 2 protocol ip parent ffff: \
        flower ip_proto tcp dst_ip $IP2 \
        action sample rate 1 group 10 trunc 60 pipe \
        action police index 1 \
        action mirred egress redirect dev $DEV2

3. Meter action using jump control.
   In the following example the same flow stats will apply to both
   mirred actions:
    tc action add police rate 1mbit burst 100k conform-exceed jump 2 / pipe
    tc filter add dev $DEV prio 2 protocol ip parent ffff: \
        flower ip_proto tcp dst_ip $IP2 \
        action police index 1 \
        action mirred egress redirect dev $DEV2
        action mirred egress redirect dev $DEV3

This series provides the platform to query per action stats for in_hw flows.

The first four patches are preparation patches with no functionality change.
The fifth patch re-uses the existing flow action stats api to query action
stats for both classifier and action dumps.
The rest of the patches add per action stats support to the Mellanox driver.
====================

Link: https://lore.kernel.org/r/20230212132520.12571-1-ozsh@nvidia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Extend the action stats callback implementation to update stats for actions
that are associated with hw counters.
Note that the callback may be called from tc action utility or from tc
flower. Both apis expect the driver to return the stats difference from
the last update. As such, query the raw counter value and maintain
the diff from the last api call in the tc layer, instead of the fs_core
layer.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently a hardware counter is associated with a flow cookie.
This does not apply to flows using branching action which are required to
return per action stats.

A single counter may apply to multiple actions.
Scan the flow actions in reverse (from the last to the first action) while
caching the last counter.
Associate all the flow attribute tc action cookies with the current
cached counter.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The tc parse action phase translates the tc actions to mlx5 flow
attributes data structure that is used during the flow offload phase.
Currently, the flow offload stage instantiates hw counters while
associating them to flow cookie. However, flows with branching
actions are required to associate a hardware counter with its action
cookies.

Store the parsed tc action cookies on the flow attribute.
Use the list of cookies in the next patch to associate a tc action cookie
with its allocated hw counter.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently a hw count action is appended to the last action of the action
list. However, a branching action may terminate the action list before
reaching the last action.

Append a count action to a branching action.
In the next patches, filters with branching actions will read this counter
when reporting stats per action.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

There are currently two mechanisms for populating hardware stats:
1. Using flow_offload api to query the flow's statistics.
   The api assumes that the same stats values apply to all
   the flow's actions.
   This assumption breaks when action drops or jumps over following
   actions.
2. Using hw_action api to query specific action stats via a driver
   callback method. This api assures the correct action stats for
   the offloaded action, however, it does not apply to the rest of the
   actions in the flow's actions array.

Extend the flow_offload stats callback to indicate that a per action
stats update is required.
Use the existing flow_offload_action api to query the action's hw stats.
In addition, currently the tc action stats utility only updates hw actions.
Reuse the existing action stats cb infrastructure to query any action
stats.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently a hardware action is uniquely identified by the <id, hw_index>
tuple. However, the id is set by the flow_act_setup callback and tc core
cannot enforce this, and it is possible that a future change could break
this. In addition, <id, hw_index> are not unique across network namespaces.

Uniquely identify the action by setting an action cookie by the tc core.
Use the unique action cookie to query the action's hardware stats.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Instead of passing 6 stats related args, pass the flow_stats.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

A single tc pedit action may be translated to multiple flow_offload
actions.
Offload only actions that translate to a single pedit command value.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently the hw action stats update is called from tcf_exts_hw_stats_update,
when a tc filter is dumped, and from tcf_action_copy_stats, when a hw
action is dumped.
However, the tcf_action_copy_stats is also called from tcf_action_dump.
As such, the hw action stats update cb is called 3 times for every
tc flower filter dump.

Move the tc action hw stats update from tcf_action_copy_stats to
tcf_dump_walker to update the hw action stats when tc action is dumped.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Fix inaccurate information about PHY muxing, and merge standalone and
multi-chip module MT7530 configuration methods.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230212131258.47551-1-arinc.unal@arinc9.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Eric Dumazet says:

====================
ipv6: more drop reason

Add more drop reasons to IPv6:

 - IPV6_BAD_EXTHDR
 - IPV6_NDISC_FRAG
 - IPV6_NDISC_HOP_LIMIT
 - IPV6_NDISC_BAD_CODE
====================

Link: https://lore.kernel.org/r/20230210184708.2172562-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Creates three new drop reasons:

SKB_DROP_REASON_IPV6_NDISC_FRAG: invalid frag (suppress_frag_ndisc).

SKB_DROP_REASON_IPV6_NDISC_HOP_LIMIT: invalid hop limit.

SKB_DROP_REASON_IPV6_NDISC_BAD_CODE: invalid NDISC icmp6 code.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Accurately reports what happened in icmpv6_notify() when handling
a packet.

This makes use of the new IPV6_BAD_EXTHDR drop reason.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

pskb_may_pull() can fail for two different reasons.

Provide pskb_may_pull_reason() helper to distinguish
between these reasons.

It returns:

SKB_NOT_DROPPED_YET           : Success
SKB_DROP_REASON_PKT_TOO_SMALL : packet too small
SKB_DROP_REASON_NOMEM         : skb->head could not be resized
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This drop reason can be used whenever an IPv6 packet
has a malformed extension header.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

All implementations of the remove callback return 0 unconditionally. So
in dwc_eth_dwmac_remove() there is no error handling necessary. Simplify
accordingly.

This is a preparation for making struct platform_driver::remove return
void, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230211112431.214252-2-u.kleine-koenig@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The function returns zero unconditionally. Change it to return void instead
which simplifies some callers as error handing becomes unnecessary.

This also makes it more obvious that most platform remove callbacks always
return zero.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230211112431.214252-1-u.kleine-koenig@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Devices with hardware buffer management do not support XDP, so do not
set xdp_features for them.

Fixes: 66c0e13a ("drivers: net: turn on XDP features")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/19b5838bb3e4515750af822edb2fa5e974d0a86b.1676196230.git.lorenzo@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add missing ndo_xdp_xmit bit to xdp_features capability flag.

Fixes: 66c0e13a ("drivers: net: turn on XDP features")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/8e3747018f0fd0b5d6e6b9aefe8d9448ca3a3288.1676195726.git.lorenzo@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add missing xsk zero-copy bit to xdp_features capability flag.

Fixes: 66c0e13a ("drivers: net: turn on XDP features")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/c8949baafdf617188dcedb9033ce5a9ca6e9e5ff.1676195440.git.lorenzo@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

dma_alloc_coherent() already clears the allocated memory, there is no need
to explicitly call memset().

Moreover, it is likely that the size in the memset() is incorrect and
should be "size * sizeof(*ring->desc)".
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/d5acce7dd108887832c9719f62c7201b4c83b3fb.1676184599.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Set xdp_features netdevice flag if lan966x nic supports xdp mode.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/01f4412f28899d97b0054c9c1a63694201301b42.1676055718.git.lorenzo@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Oleksij Rempel says:

====================
net: add EEE support for KSZ9477 switch family

changes v8:
- fix comment for linkmode_to_mii_eee_cap1_t() function
- add Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
- add Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>

changes v7:
- update documentation for genphy_c45_eee_is_active()
- address review comments on "net: dsa: microchip: enable EEE support"
  patch

changes v6:
- split patch set and send only first 9 patches
- Add Reviewed-by: Andrew Lunn <andrew@lunn.ch>
- use 0xffff instead of GENMASK
- Document @supported_eee
- use "()" with function name in comments

changes v5:
- spell fixes
- move part of genphy_c45_read_eee_abilities() to
  genphy_c45_read_eee_cap1()
- validate MDIO_PCS_EEE_ABLE register against 0xffff val.
- rename *eee_100_10000* to *eee_cap1*
- use linkmode_intersects(phydev->supported, PHY_EEE_CAP1_FEATURES)
  instead of !linkmode_empty()
- add documentation to linkmode/register helpers

changes v4:
- remove following helpers:
  mmd_eee_cap_to_ethtool_sup_t
  mmd_eee_adv_to_ethtool_adv_t
  ethtool_adv_to_mmd_eee_adv_t
  and port drivers from this helpers to linkmode helpers.
- rebase against latest net-next
- port phy_init_eee() to genphy_c45_eee_is_active()

changes v3:
- rework some parts of EEE infrastructure and move it to c45 code.
- add supported_eee storage and start using it in EEE code and by the
  micrel driver.
- add EEE support for ar8035 PHY
- add SmartEEE support to FEC i.MX series.

changes v2:
- use phydev->supported instead of reading MII_BMSR regiaster
- fix @get_eee > @set_eee

With this patch series we provide EEE control for KSZ9477 family of
switches and
AR8035 with i.MX6 configuration.
According to my tests, on a system with KSZ8563 switch and 100Mbit idle
link,
we consume 0,192W less power per port if EEE is enabled.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

All preparations are done. Now we can start using new functions and remove
the old code.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reduce code duplicated by migrating phy_init_eee() to
genphy_c45_eee_is_active().
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Migrate from genphy_config_eee_advert() to genphy_c45_write_eee_adv().

It should work as before except write operation to the EEE adv registers
will be done only if some EEE abilities was detected.

If some driver will have a regression, related driver should provide own
.get_features callback. See micrel.c:ksz9477_get_features() as example.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Migrate from genphy_config_eee_advert() to genphy_c45_write_eee_adv().

It should work as before except write operation to the EEE adv registers
will be done only if some EEE abilities was detected.

If some driver will have a regression, related driver should provide own
.get_features callback. See micrel.c:ksz9477_get_features() as example.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add replacement for phy_ethtool_get/set_eee() functions.

Current phy_ethtool_get/set_eee() implementation is great and it is
possible to make it even better:
- this functionality is for devices implementing parts of IEEE 802.3
  specification beyond Clause 22. The better place for this code is
  phy-c45.c
- currently it is able to do read/write operations on PHYs with
  different abilities to not existing registers. It is better to
  use stored supported_eee abilities to avoid false read/write
  operations.
- the eee_active detection will provide wrong results on not supported
  link modes. It is better to validate speed/duplex properties against
  supported EEE link modes.
- it is able to support only limited amount of link modes. We have more
  EEE link modes...

By refactoring this code I address most of this point except of the last
one. Adding additional EEE link modes will need more work.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function will be needed for genphy_c45_ethtool_get_eee() provided
by next patch.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

KSZ8563R, which has same PHYID as KSZ9477 family, will change "EEE control
and capability 1" (Register 3.20) content depending on configuration of
"EEE advertisement 1" (Register 7.60). Changes on the 7.60 will affect
3.20 register.

So, instead of depending on register 3.20, driver should set supported_eee.

Proper supported_eee configuration is needed to make use of generic
PHY c45 set/get_eee functions provided by next patches.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add generic function for EEE abilities defined by IEEE 802.3
specification. For now following registers are supported:
- IEEE 802.3-2018 45.2.3.10 EEE control and capability 1 (Register 3.20)
- IEEE 802.3cg-2019 45.2.1.186b 10BASE-T1L PMA status register
  (Register 1.2295)

Since I was not able to find any flag signaling support of these
registers, we should detect link mode abilities first and then based on
these abilities doing EEE link modes detection.

Results of EEE ability detection will be stored into new variable
phydev->supported_eee.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some of KSZ9477 family switches provides EEE support. To enable it, we
just need to register set_mac_eee/set_mac_eee handlers and validate
supported chip version and port.

Currently supported chip variants are: KSZ8563, KSZ9477, KSZ9563,
KSZ9567, KSZ9893, KSZ9896, KSZ9897. KSZ8563 supports EEE only with
100BaseTX/Full.  Other chips support 100BaseTX/Full and 1000BaseTX/Full.
Low Power Idle configuration is not supported and currently not
documented in the datasheets.

EEE PHY specific tunings are not documented in the switch datasheets, but can
overlap with KSZ9131 specification.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Shannon Nelson says:

====================
ionic: on-chip descriptors

We start with a couple of house-keeping patches that were originally
presented for 'net', then we add support for on-chip descriptor rings
for tx-push, as well as adding support for rx-push.

I have a patch for the ethtool userland utility that I can send out
once this has been accepted.

v4: added rx-push attributes to ethtool netlink
    converted CMB feature from using a priv-flag to using ethtool tx/rx-push

v3: edited commit message to describe interface-down limitation
    added warn msg if cmb_inuse alloc fails
    removed unnecessary clearing of phy_cmb_pages and cmb_npages
    changed cmb_rings_toggle to use cmb_inuse
    removed unrelated pci_set_drvdata()
    removed unnecessary (u32) cast
    added static inline func for writing CMB descriptors

v2: dropped the rx buffers patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The ionic device has on-board memory (CMB) that can be used
for descriptors as a way to speed descriptor access for faster
packet processing.  It is rumored to improve latency and/or
packets-per-second for some profiles of small packet traffic,
although your mileage may vary.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similar to what was done for TX_PUSH, add an RX_PUSH concept
to the ethtool interfaces.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Minor Code cleanup details.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>