- 16 Apr, 2021 13 commits
-
-
Jack Yu authored
Modification for code simplicity. Signed-off-by:
Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/340ee2df83ce47fcb1b59541b12ba7f4@realtek.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Mark Brown authored
Merge series "ASoC: Intel: add new TGL/ADL configurations" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Very little code but quite a few descriptors to add TigerLake (TGL) /AlderLake (ADL) ACPI match tables for I2S and SoundWire devices, new dailinks for Bluetooth offload. Some day this will be read from platform firmware. Also clarify how microphones are handled for SoundWire devices, and create modules to avoid linking the same code multiple times. Pierre-Louis Bossart (5): ASoC: Intel: soc-acpi: add ADL SoundWire base configurations ASoC: Intel: soc-acpi: add ADL jack-less SoundWire configurations ASoC: Intel: sof_sdw: add mutual exclusion between PCH DMIC and RT715 ASoC: Intel: boards: handle hda-dsp-common as a module ASoC: Intel: boards: create sof-maxim-common module Vamshi Krishna Gopal (3): ASoC: Intel: soc-acpi: add entries for i2s machines in ADL match table ASoC: Intel: sof_sdw: add quirk for new ADL-P Rvp ASoC: Intel: boards: add support for adl boards in sof-rt5682 Yong Zhi (1): ASoC: Intel: Boards: tgl_max98373: Add BT offload support sound/soc/intel/boards/Kconfig | 18 ++ sound/soc/intel/boards/Makefile | 28 +- sound/soc/intel/boards/bxt_da7219_max98357a.c | 1 + sound/soc/intel/boards/bxt_rt298.c | 1 + sound/soc/intel/boards/cml_rt1011_rt5682.c | 1 + sound/soc/intel/boards/ehl_rt5660.c | 1 + sound/soc/intel/boards/glk_rt5682_max98357a.c | 1 + sound/soc/intel/boards/hda_dsp_common.c | 5 + sound/soc/intel/boards/skl_hda_dsp_generic.c | 1 + sound/soc/intel/boards/sof_da7219_max98373.c | 1 + sound/soc/intel/boards/sof_maxim_common.c | 24 +- sound/soc/intel/boards/sof_maxim_common.h | 6 +- sound/soc/intel/boards/sof_pcm512x.c | 1 + sound/soc/intel/boards/sof_rt5682.c | 67 ++++- sound/soc/intel/boards/sof_sdw.c | 32 ++- sound/soc/intel/boards/sof_sdw_common.h | 1 + sound/soc/intel/boards/sof_sdw_max98373.c | 4 +- .../intel/common/soc-acpi-intel-adl-match.c | 249 ++++++++++++++++++ 18 files changed, 415 insertions(+), 27 deletions(-) -- 2.25.1
-
Mark Brown authored
Merge series "ASoC: soc-pcm: ignore dummy-DAI at soc_pcm_params_symmetry()" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark I noticed if we have... 1) Sound Card used DPCM 2) It exchanges rate to 48kHz by using .be_hw_params_fixup() 3) Codec had symmetric_rate = 1 We will get below error. I didn't confirm, but maybe same things happen if it exchanged channels/sample_bits. # aplay 44100.wav # aplay 44100.wav => [kernel] be.ak4613-hifi: ASoC: unmatched rate symmetry: snd-soc-dummy-dai:44100 - soc_pcm_params_symmetry:48000 [kernel] be.ak4613-hifi: ASoC: hw_params BE failed -22 [kernel] fe.rsnd-dai.0: ASoC: hw_params BE failed -22 aplay: set_params:1407: Unable to install hw params: ACCESS: RW_INTERLEAVED FORMAT: S16_LE SUBFORMAT: STD SAMPLE_BITS: 16 FRAME_BITS: 32 CHANNELS: 2 RATE: 44100 PERIOD_TIME: (23219 23220) PERIOD_SIZE: 1024 PERIOD_BYTES: 4096 PERIODS: 4 BUFFER_TIME: (92879 92880) BUFFER_SIZE: 4096 BUFFER_BYTES: 16384 TICK_TIME: 0 This patch-set solves this issue. patch 1) - 3) are just cleanup patches. 4) is fot this issue. Link: https://lore.kernel.org/r/87a6q0z4xt.wl-kuninori.morimoto.gx@renesas.com Kuninori Morimoto (4): ASoC: soc-pcm: don't use "name" on __soc_pcm_params_symmetry() macro ASoC: soc-pcm: indicate DAI name if soc_pcm_params_symmetry() failed ASoC: soc-utils: add snd_soc_component_is_dummy() ASoC: soc-pcm: ignore dummy-DAI at soc_pcm_params_symmetry() include/sound/soc-component.h | 1 + sound/soc/soc-core.c | 2 +- sound/soc/soc-pcm.c | 14 ++++++++------ sound/soc/soc-utils.c | 6 ++++++ 4 files changed, 16 insertions(+), 7 deletions(-) -- 2.25.1
-
Thierry Reding authored
On Tegra186 and later, the number of links can go up to 72, so bump the maximum number of links to the next power of two (128). Fixes: f2138aed ("ASoC: simple-card-utils: enable flexible CPU/Codec/Platform") Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210416071147.2149109-2-thierry.reding@gmail.comReviewed-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
-
Thierry Reding authored
The DAI counting code doesn't propagate errors when the number of maximum links is exceeded, which causes subsequent initialization code to continue to run and that eventually leads to memory corruption with the code trying to access memory that is out of bounds. Fix this by propagating errors when the maximum number of links is reached, which ensures that the driver fails to load and prevents the memory corruption. Fixes: f2138aed ("ASoC: simple-card-utils: enable flexible CPU/Codec/Platform") Signed-off-by:
-
Kuninori Morimoto authored
soc_pcm_params_symmetry() checks CPU / Codec symmetry. Unfortunately there was bug on it (= A) which didn't check Codec. But is back by (B). A: v5.7: commit c840f769 ("ASoC: soc-pcm: Merge for_each_rtd_cpu/codec_dais()") B: v5.12: commit 3a906721 ("ASoC: soc-pcm: cleanup soc_pcm_params_symmetry()") In total, old - v5.6 (= Generation-1): symmetric_rate : DAI_Link / CPU / Codec symmetric_channels : DAI_Link / CPU / Codec symmetric_sample_bits : DAI_Link / CPU / Codec v5.7 - v5.11 (= Generation-2): (= because of bug by (A)) symmetric_rate : DAI_Link / CPU symmetric_channels : DAI_Link / CPU / Codec symmetric_sample_bits : DAI_Link / CPU / Codec v5.12 - (= Generation-3): (= back by (B)) symmetric_rate : DAI_Link / CPU / Codec symmetric_channels : DAI_Link / CPU / Codec symmetric_sample_bits : DAI_Link / CPU / Codec OTOH, we can use DPCM which is configured by FE / BE. Both FE / BE uses dummy-DAI. FE: CPU <-> dummy-DAI BE: dummy-DAI <-> Codec One note is that we can use .be_hw_params_fixup in DPCM case. This means BE settings might be fixuped/updated by FE. This feature is used for example on MIXer case. It can be happen not only for rate, but for channels/sample_bits too. Because of these reasons, below issue happen on Generation-1 / Generation-3, if... 1) Sound Card used DPCM 2) It exchanges rate to 48kHz by using .be_hw_params_fixup() 3) Codec had symmetric_rate = 1 I didn't confirm, but maybe same things happen if it exchanged channels/sample_bits at Generation-1/2/3 too. # aplay 44100.wav # aplay 44100.wav => [kernel] be.ak4613-hifi: ASoC: unmatched rate symmetry: snd-soc-dummy-dai:44100 - soc_pcm_params_symmetry:48000 [kernel] be.ak4613-hifi: ASoC: hw_params BE failed -22 [kernel] fe.rsnd-dai.0: ASoC: hw_params BE failed -22 aplay: set_params:1407: Unable to install hw params: ACCESS: RW_INTERLEAVED FORMAT: S16_LE SUBFORMAT: STD SAMPLE_BITS: 16 FRAME_BITS: 32 CHANNELS: 2 RATE: 44100 PERIOD_TIME: (23219 23220) PERIOD_SIZE: 1024 PERIOD_BYTES: 4096 PERIODS: 4 BUFFER_TIME: (92879 92880) BUFFER_SIZE: 4096 BUFFER_BYTES: 16384 TICK_TIME: 0 soc_pcm_params_symmetry() checks by below if (symmetry) for_each_rtd_cpu_dais(rtd, i, cpu_dai) if (cpu_dai->xxx && cpu_dai->xxx != d.xxx) { dev_err(rtd->dev, "..."); return -EINVAL; } Because of above reason 3) (= Codec had symmetric_rate = 1) BE can't ignore "if (symmetric)". At 1st aplay, soc_pcm_params_symmetry() ignores it, because dummy-DAI->rate is 0. After this check, each DAI sets/keep settings. In above sample case, BE gets 48000 and FE gets 44100, and it happen BE -> FE order. Because DPCM is sharing *same* dummy-DAI, dummy-DAI sets as 48000 by BE, and is overwrote by 44100 by FE. This settings never be cleaned (= a) after 1st aplay, because dummy-DAI is used from FE/BE, never be last user (b). static int soc_pcm_hw_clean(...) { ... for_each_rtd_dais(rtd, i, dai) { ... (b) if (snd_soc_dai_active(dai) == 1) (a) soc_pcm_set_dai_params(dai, NULL); ... } ... } At 2nd aplay, BE gets 48000 but dummy-DAI is keeping 44100, soc_pcm_params_symmetry() checks will fail. To solve this issue, this patch ignores dummy-DAI at soc_pcm_params_symmetry() Link: https://lore.kernel.org/r/87a6q0z4xt.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87y2djxa2n.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
There is snd_soc_dai_is_dummy(), but not for component. This patch adds it. Signed-off-by:
-
Kuninori Morimoto authored
It indicates unmatched symmetry value, but not indicates on which DAI. This patch indicates it. Signed-off-by:
-
Kuninori Morimoto authored
__soc_pcm_params_symmetry() macro is using "name" as parameter which will be exchanged to rate/channles/sample_bit, like below dai->name => dai->rate dai->name => dai->channels dai->name => dai->sample_bit But, dai itself has "name". This means 1) It is very confusable naming 2) It can't use dai->name This patch use "xxx" instead of "name" Signed-off-by:
-
Daniel Baluta authored
A DAI link has 3 components: * CPU * platform * codec(s) A component is specified via: * name * of_node * dai_name In order to avoid confusion when building a sound card we disallow matching by both name and of_node (1). soc_check_tplg_fes allows overriding certain BE links by overriding BE link name. This doesn't work well if BE link was specified via DT, because we end up with a link with both name and of_node specified which is conflicting with (1). In order to fix this we need to: * override of_node if component was specified via DT * override name, otherwise. Signed-off-by:
Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20210414101212.65573-1-daniel.baluta@oss.nxp.comSigned-off-by:
-
Vamshi Krishna Gopal authored
Add quirks for jack detection, rt711 DAI and DMIC Reviewed-by:
Bard Liao <bard.liao@intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by:
Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210415175013.192862-6-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
Add one configuration with no RT711. Signed-off-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Libin Yang <libin.yang@intel.com> Link: https://lore.kernel.org/r/20210415175013.192862-3-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
Add configurations ported over from TGL. The topology names need to include link information given all the hardware permutations. Signed-off-by:
-
- 15 Apr, 2021 8 commits
-
-
Ranjani Sridharan authored
Recently, the sof_pcm_dai_link_fixup() function was updated to match SSP config with the PCM hw_params and set the current_config for the DAI widget. But the sof_restore_pipelines() function still chooses the default config for the DAI widget upon resuming. Fix this to use the last used config when setting up the DAI widget during resume. Fixes: c943a586 ("ASoC: SOF: match SSP config with pcm hw params") Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
-
Mark Brown authored
Merge series "ASoC: simple-card/audio-graph: adjust to multi CPU/Codec" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark These patches adjusts to multi CPU/Codec on simple-card / audio-graph. This is part of prepare for new audio-graph-card2. Kuninori Morimoto (5): ASoC: simple-card: remove unused variable from simple_parse_of() ASoC: simple-card: use asoc_link_to_xxx() macro ASoC: simple-card: use simple_props_to_xxx() macro ASoC: audio-graph: use asoc_link_to_xxx() macro ASoC: audio-graph: use simple_props_to_xxx() macro sound/soc/generic/audio-graph-card.c | 43 +++++++++++++----------- sound/soc/generic/simple-card.c | 50 +++++++++++++--------------- 2 files changed, 47 insertions(+), 46 deletions(-) -- 2.25.1
-
Guangqing Zhu authored
Coccinelle noticed: sound/soc/codecs/wcd934x.c:5041:7-32: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT Signed-off-by:
Guangqing Zhu <zhuguangqing83@gmail.com> Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210415073829.22750-1-zhuguangqing83@gmail.comSigned-off-by:
-
Kuninori Morimoto authored
We shouldn't use dai_props->cpus/codecs directly, because these are array now to supporting multi CPU/Codec/Platform. This patch uses simple_props_to_xxx() macro for it. Signed-off-by:
-
Kuninori Morimoto authored
We shouldn't use dai_link->cpus/codecs/platforms directly, because these are array now to supporting multi CPU/Codec/Platform. This patch uses asoc_link_to_xxx() macro for it. Signed-off-by:
-
Kuninori Morimoto authored
We shouldn't use dai_props->cpus/codecs directly, because these are array now to supporting multi CPU/Codec/Platform. This patch uses simple_props_to_xxx() macro for it. Signed-off-by:
-
Kuninori Morimoto authored
We shouldn't use dai_link->cpus/codecs/platforms directly, because these are array now to supporting multi CPU/Codec/Platform. This patch uses asoc_link_to_xxx() macro for it. Signed-off-by:
-
Kuninori Morimoto authored
commit d9ffff69 ("ASoC: simple-card: Use snd_soc_of_parse_aux_devs()") switched to use snd_soc_of_parse_aux_devs() on simple_parse_of(). Thus noone is using *top anymore. Let's cleanup unused variable. Signed-off-by:
-
- 14 Apr, 2021 11 commits
-
-
Mark Brown authored
Merge series "kunit: Fix formatting of KUNIT tests to meet the standard" from Nico Pache <npache@redhat.com>: There are few instances of KUNIT tests that are not properly defined. This commit focuses on correcting these issues to match the standard defined in the Documentation. Issues Fixed: - tests should end in KUNIT_TEST, some fixes have been applied to correct issues were KUNIT_TESTS is used or KUNIT is not mentioned. - Tests should default to KUNIT_ALL_TESTS - Tests configs tristate should have if !KUNIT_ALL_TESTS No functional changes other than CONFIG name changes Changes since v2: - Split patch 1 by subcomponents - fix issues where config was *KUNIT_TEST_TEST - properly threaded/chained messages Nico Pache (6): kunit: ASoC: topology: adhear to KUNIT formatting standard kunit: software node: adhear to KUNIT formatting standard kunit: ext4: adhear to KUNIT formatting standard kunit: lib: adhear to KUNIT formatting standard kunit: mptcp: adhear to KUNIT formatting standard m68k: update configs to match the proper KUNIT syntax arch/m68k/configs/amiga_defconfig | 6 +++--- arch/m68k/configs/apollo_defconfig | 6 +++--- arch/m68k/configs/atari_defconfig | 6 +++--- arch/m68k/configs/bvme6000_defconfig | 6 +++--- arch/m68k/configs/hp300_defconfig | 6 +++--- arch/m68k/configs/mac_defconfig | 6 +++--- arch/m68k/configs/multi_defconfig | 6 +++--- arch/m68k/configs/mvme147_defconfig | 6 +++--- arch/m68k/configs/mvme16x_defconfig | 6 +++--- arch/m68k/configs/q40_defconfig | 6 +++--- arch/m68k/configs/sun3_defconfig | 6 +++--- arch/m68k/configs/sun3x_defconfig | 6 +++--- drivers/base/test/Kconfig | 2 +- drivers/base/test/Makefile | 2 +- fs/ext4/.kunitconfig | 2 +- fs/ext4/Kconfig | 2 +- fs/ext4/Makefile | 2 +- lib/Kconfig.debug | 21 +++++++++++++-------- lib/Makefile | 6 +++--- net/mptcp/Kconfig | 2 +- net/mptcp/Makefile | 2 +- net/mptcp/crypto.c | 2 +- net/mptcp/token.c | 2 +- sound/soc/Kconfig | 2 +- sound/soc/Makefile | 4 ++-- 25 files changed, 64 insertions(+), 59 deletions(-) -- 2.30.2
-
Mark Brown authored
Merge series "ASoC: rsnd: tidyup Renesas sound" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark These are tidyup patches for Renesas sound drivers. Kuninori Morimoto (5): ASoC: rsnd: call rsnd_ssi_master_clk_start() from rsnd_ssi_init() ASoC: rsnd: check all BUSIF status when error ASoC: rsnd: add rsnd_ssi_busif_err_status_clear() ASoC: rsnd: add rsnd_ssi_busif_err_irq_enable/disable() ASoC: rsnd: add usage for SRC sound/soc/sh/rcar/src.c | 9 ++ sound/soc/sh/rcar/ssi.c | 225 ++++++++++++++++++---------------------- 2 files changed, 110 insertions(+), 124 deletions(-) -- 2.25.1
-
Nico Pache authored
Drop 'S' from end of SND_SOC_TOPOLOGY_KUNIT_TESTS inorder to adhear to the KUNIT *_KUNIT_TEST config name format. Signed-off-by:
Nico Pache <npache@redhat.com> Link: https://lore.kernel.org/r/dcf79e592f9a7e14483dde32ac561f6af2632e50.1618388989.git.npache@redhat.comSigned-off-by:
-
Yang Li authored
Fix the following versioncheck warning: ./sound/soc/codecs/cs35l35.c: 12 linux/version.h not needed. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1618380883-114841-1-git-send-email-yang.lee@linux.alibaba.comSigned-off-by:
-
Shengjiu Wang authored
Change function name to ak5558_reset to match devicetree property "reset-gpios". Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1618382024-31725-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Shengjiu Wang authored
Reset (aka power off) happens when the reset gpio is made active. The reset gpio is GPIO_ACTIVE_LOW Fixes: 92088477 ("ASoC: ak5558: Add support for AK5558 ADC driver") Signed-off-by:
-
Kuninori Morimoto authored
This patch add missing usage comment for SRC. Signed-off-by:
-
Kuninori Morimoto authored
Current ssi.c has duplicated code to control BUSIF over/under run interrupt. This patch adds new rsnd_ssi_busif_err_irq_enable/disable() and share the code. Signed-off-by:
-
Kuninori Morimoto authored
Current ssi.c clears BUSIF error status at __rsnd_ssi_interrupt(), but its code is verbose. This patch off-load it to rsnd_ssi_busif_err_status_clear(). Signed-off-by:
-
Kuninori Morimoto authored
commit 66c705d0 ("SoC: rsnd: add interrupt support for SSI BUSIF buffer") adds __rsnd_ssi_interrupt() checks for BUSIF status, but is using "break" at for loop. This means it is not checking all status. Let's check all BUSIF status. Fixes: commit 66c705d0 ("SoC: rsnd: add interrupt support for SSI BUSIF buffer") Signed-off-by:
-
Kuninori Morimoto authored
Current rsnd needs to call .prepare (P) for clock settings, .trigger for playback start (S) and stop (E). It should be called as below from SSI point of view. P -> S -> E -> P -> S -> E -> ... But, if you used MIXer, below case might happen (2) 1: P -> S ---> E -> ... 2: P ----> S -> ... (1) (3) P(1) setups clock, but E(2) resets it. and starts playback (3). In such case, it will reports "SSI parent/child should use same rate". rsnd_ssi_master_clk_start() which is the main function at (P) was called from rsnd_ssi_init() (= S) before, but was moved by below patch to rsnd_soc_dai_prepare() (= P) to avoid using clk_get_rate() which shouldn't be used under atomic context. commit 4d230d12 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic") Because of above patch, rsnd_ssi_master_clk_start() is now called at (P) which is for non atomic context. But (P) is assuming that spin lock is *not* used. One issue now is rsnd_ssi_master_clk_start() is checking ssi->xxx which should be protected by spin lock. After above patch, adg.c had below patch for other reasons. commit 06e8f5c8 ("ASoC: rsnd: don't call clk_get_rate() under atomic context") clk_get_rate() is used at probe() timing by this patch. In other words, rsnd_ssi_master_clk_start() is no longer using clk_get_rate() any more. This means we can call it from rsnd_ssi_init() (= S) again which is protected by spin lock. This patch re-move it to under spin lock, and solves 1. checking ssi->xxx without spin lock issue. 2. clk setting / device start / device stop race condition. Reported-by:
Linh Phung T. Y. <linh.phung.jy@renesas.com> Signed-off-by:
-
- 13 Apr, 2021 8 commits
-
-
Christophe JAILLET authored
If 'devm_regmap_init_i2c()' fails, there is no need to goto err. We should return directly as already done by the surrounding error handling paths. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/9fec48e75bc1d3c92626e6f6aca2344bda223379.1618145790.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Christophe JAILLET authored
If 'devm_regmap_init_i2c()' fails, there is no need to goto err. We should return directly as already done by the surrounding error handling paths. Signed-off-by:
-
Mark Brown authored
Merge series "ASoC: simple-card-utils: prepare for multi support" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark This patch-set is for v2 of Multi-CPU/Codec support, and some cleanups. v1 had patch-conflict on simple-card / audio-graph with below. v2 was solved it. fa74c223 ("ASoC: simple-card: fix possible uninitialized single_cpu local variable") I want to add new audio-graph-card2 driver which can support not only DPCM, but also Multi-CPU/Codec, and Codec2Codec. And it is also supporting audio-graph-card2 base custom driver. But before supporting such driver, we need to cleanup existing simple-card / audio-graph, because these and new driver are sharing code. Link: https://lore.kernel.org/r/87wntmod33.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/20210408141639.GA39604@sirena.org.uk Kuninori Morimoto (12): ASoC: simple-card-utils: setup dai_props cpu_dai/codec_dai at initial timing ASoC: simple-card-utils: remove li->dais/li->conf ASoC: simple-card-utils: use for_each_prop_xxx() ASoC: simple-card-utils: remove asoc_simple_parse_xxx() ASoC: simple-card-utils: care multi DAI at asoc_simple_clean_reference() ASoC: simple-card-utils: indicate dai_fmt if exist ASoC: simple-card-utils: indicate missing CPU/Codec numbers for debug ASoC: simple-card-utils: add simple_props_to_xxx() macro ASoC: simple-card-utils: multi support at asoc_simple_canonicalize_cpu/platform() ASoC: simple-card-utils: tidyup debug info for clock ASoC: simple-card-utils: tidyup dev_dbg() to use 1 line ASoC: simple-card-utils: tidyup asoc_simple_parse_convert() include/sound/simple_card_utils.h | 107 ++++++++++------ sound/soc/generic/audio-graph-card.c | 64 ++++------ sound/soc/generic/simple-card-utils.c | 174 ++++++++++++++++---------- sound/soc/generic/simple-card.c | 70 ++++------- 4 files changed, 226 insertions(+), 189 deletions(-) -- 2.25.1
-
Chen Lifu authored
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Chen Lifu <chenlifu@huawei.com> Reviewed-by:
Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20210409015953.259688-1-chenlifu@huawei.comSigned-off-by:
-
Kuninori Morimoto authored
dev is not used. This patch removes it. Signed-off-by:
-
Kuninori Morimoto authored
We can use 100 char now for 1 line. This patch tidyup unreadable dev_dbg() message. Signed-off-by:
-
Kuninori Morimoto authored
simple-card / audio-graph can use clock as dai->clk or dai->sysclk. These related information should be indicated at same position. This patch tidyup it. Signed-off-by:
-
Kuninori Morimoto authored
Current asoc_simple_canonicalize_cpu/platform() is assuming single CPU, single Platform, but we want to support Multi support. This patch is prepare for it. Signed-off-by:
-
