- 19 May, 2021 40 commits
-
-
Wei Yongjun authored
Fix to return a negative error code -ENOMEM from the error handling case instead of 0, as done elsewhere in this function. Fixes: c6e08d62 ("net: qrtr: Allocate workqueue before kernel_bind") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
In case of error, the function mdiobus_get_phy() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Reported-by:
-
Davide Caratti authored
modern userspace applications, like OVN, can configure the TC datapath to "recirculate" packets several times. If more than 4 "recirculation" rules are configured, packets can be dropped by __tcf_classify(). Changing the maximum number of reclassifications (from 4 to 16) should be sufficient to prevent drops in most use cases, and guard against loops at the same time. Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-05-19 The following pull-request contains BPF updates for your *net-next* tree. We've added 43 non-merge commits during the last 11 day(s) which contain a total of 74 files changed, 3717 insertions(+), 578 deletions(-). The main changes are: 1) syscall program type, fd array, and light skeleton, from Alexei. 2) Stop emitting static variables in skeleton, from Andrii. 3) Low level tc-bpf api, from Kumar. 4) Reduce verifier kmalloc/kfree churn, from Lorenz. ====================
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Add support for new multipath hash policies This patchset adds support for two new multipath hash policies in mlxsw. Patch #1 emits net events whenever the net.ipv{4,6}.fib_multipath_hash_fields sysctls are changed. This allows listeners to react to changes in the packet fields used for the computation of the multipath hash. Patches #2-#3 refactor the code in mlxsw that is responsible for the configuration of the multipath hash, so that it will be easier to extend for the two new policies. Patch #4 adds the register fields required to support the new policies. Patch #5-#7 add support for inner layer 3 and custom multipath hash policies. Tested using following forwarding selftests: * custom_multipath_hash.sh * gre_custom_multipath_hash.sh * gre_inner_v4_multipath.sh * gre_inner_v6_multipath.sh ==================== -
Ido Schimmel authored
When this policy is set, only enable the packet fields that were enabled by user space for multipath hash computation. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
-
Ido Schimmel authored
When this policy is set, the kernel uses the inner layer 3 fields for multipath hash computation and falls back to the outer fields if no encapsulation was encountered. This behavior is most likely influenced by the behavior of the flow dissector, which is used for the packet dissection. The Spectrum ASIC, however, cannot fallback to outer fields if inner fields are not available. This should not result in a discrepancy from the software data path because if several flows have matching inner fields, they will tend to have matching outer fields as well. Therefore, implement this policy by enabling both outer and inner layer 3 fields for the multipath hash computation. Signed-off-by:
-
Ido Schimmel authored
Outer IPv4 and IPv6 addresses are used by multiple multipath hash policies. Factor out helpers that set these fields to increase code sharing between different policies. Signed-off-by:
-
Ido Schimmel authored
The RECRv2 register is used for setting up the router's ECMP hash configuration. Extend it with inner packet fields to allow the ECMP hash to be calculated based on inner flow information. Signed-off-by:
-
Ido Schimmel authored
Currently, the multipath hash configuration is written directly to the register payload. While this is OK for the two currently supported policies, it is going to be hard to follow when more policies and more packet fields are added. Instead, set the required headers and fields in a bitmap and then dump it to the register payload. Signed-off-by:
-
Ido Schimmel authored
The code was written when only two multipath hash policies were present, so the if statement was sufficient. The next patch and future patches are going to add support for more policies, so move to a switch statement. Signed-off-by:
-
Ido Schimmel authored
In-kernel notifications are already sent when the multipath hash policy itself changes, but not when the multipath hash fields change. Add these notifications, so that interested listeners (e.g., switch ASIC drivers) could perform the necessary configuration. Signed-off-by:
-
Stephan Gerhold authored
S3FWRN5 depends on a clock input ("XI" pin) to function properly. Depending on the hardware configuration this could be an always-on oscillator or some external clock that must be explicitly enabled. So far we assumed that the clock is always-on. Make the driver request an (optional) clock from the device tree and make sure the clock is running before starting S3FWRN5. Note: S3FWRN5 asserts "GPIO2" whenever it needs the clock input to function correctly. On some hardware configurations, GPIO2 is connected directly to an input pin of the external clock provider (e.g. the main PMIC of the SoC). In that case, it can automatically AND the clock enable bit and clock request from S3FWRN5 so that the clock is actually only enabled when needed. It is also conceivable that on some other hardware configuration S3FWRN5's GPIO2 might be connected as a regular GPIO input of the SoC. In that case, follow-up patches could extend the driver to request the GPIO, set up an interrupt and only enable the clock when requested by S3FWRN5. Signed-off-by:Stephan Gerhold <stephan@gerhold.net> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by:
-
Stephan Gerhold authored
On some systems, S3FWRN5 depends on having an external clock enabled to function correctly. Allow declaring that clock in the device tree. Signed-off-by:
-
Zheng Yejian authored
loginuid/sessionid/secid have been read from 'current' instead of struct netlink_skb_parms, the parameter 'skb' seems no longer needed. Fixes: c53fa1ed ("netlink: kill loginuid/sessionid/sid members from struct netlink_skb_parms") Signed-off-by:
Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by:
-
David S. Miller authored
Guangbin Huang says: ==================== net: intel: some cleanups This patchset adds some cleanups for intel e1000/e1000e ethernet driver. ==================== Reviewed-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
-
Hao Chen authored
There is a misspell word "retreived" in comment, so fix it to "retrieved". Signed-off-by:
Hao Chen <chenhao288@hisilicon.com> Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Hao Chen authored
There are double "slot" in comment, so remove the redundant one. Signed-off-by:
-
Hao Chen authored
There are double "the" in comment, so remove the redundant one. Signed-off-by:
-
Hao Chen authored
There are double "in" and "to" in comments, so remove the redundant one. Signed-off-by:
-
Hao Chen authored
There are double "slot" in comment, so remove the redundant one. Signed-off-by:
-
David S. Miller authored
Hui Tang says: ==================== net: ethernet: remove leading spaces before tabs There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' ==================== Signed-off-by: -
Hui Tang authored
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
Hui Tang <tanghui20@huawei.com> Signed-off-by:
-
Hui Tang authored
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Cc: Armin Wolf <W_Armin@gmx.de> Signed-off-by:
-
Hui Tang authored
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
Hui Tang authored
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Signed-off-by:
-
Hui Tang authored
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Cc: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by:
-
Hui Tang authored
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Hui Tang authored
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Signed-off-by:
-
Hui Tang authored
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
Hui Tang authored
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Hui Tang authored
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Cc: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by:
-
Hui Tang authored
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Cc: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Hui Tang authored
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Cc: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by:
Lijun Pan <lijunp213@gmail.com> Signed-off-by:
-
Hui Tang authored
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de> Signed-off-by:
-
Hui Tang authored
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Signed-off-by:
-
Hui Tang authored
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Cc: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by:
-
Hui Tang authored
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Hui Tang authored
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Signed-off-by:
-
Hui Tang authored
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Signed-off-by:
-
